I have been tinting vehicles, home and offices for 29 years. I also work in the car audio field. i also work part time on cars, small repairs, some electronic repairs,etc. I love to make how to videos in my spare time to help out do it your selfer's. I have been around cars for over 35 years and love to work on them. I have a small window tinting and car audio business in San Diego California. I own, manage and work mostly by myself and have been doing so for 29years.
Пікірлер
My son just replaced the grommet/bushing but lights stay on. Any ideas are helpful?
Could be a bad brake switch
My dog scratched up the top leather portion of the door panel, does the entire door panel need to be replaced or is can that piece be disassembled from the panel?
Yes
Excellent video! Get the silicon grommets off Amazon and you dont have to pull out the pin. Just push the brake pedal with your hand and use the other to push them in place. I agree to let off the brake pedal to sit them in properly. Took me 5 minutes with this video and a flashlight.
Awesome
I watched the whole video and you did a great job. Unfortunately the driver side door won’t open from the inside or the outside so the panel can’t be removed. Any trick on how to get the door open? Thank you
You would have to remove the front seats from the opposite door, so you can have room to remove the door panel. Once the panel is off , you would have to see why it is not opening
Thank you so much for taking the time to answer my question 😊
I wonder what took me so long to watch this video. That bulb burnt so long ago in my car and I didn’t know the number of the bulb so I could change it lol. Thank you !
Your welcome
Hey! Could you please attach the link to the sockets you used
This works from 2021-2023 Malibu. I ended up buying a package of red clips from dealership for further panel removals
Thanks for video - very easy to follow and replicate. Made a speaker replacement a snap.
I am not confident enough to try this and nissan wants 275 just to look at my 25 year old baby
If you take the seat out, it will make it 10 times easier. Its very hard to get in there with the seat in the way
What happen if my coolant causing my car to smoke ? I brought a coolant tank I haven’t put it in yet any suggestions please
Maybe bad head gasket
Thanks! This is the most detailed instructional video for my 2007 Accord with the transponder. Helped confirm that would need to destroy the old case in order to get to the transponder.
Very clear and detailed removal and installation instructions for Gen 4 Mazda 3 door panels. Best video I've seen on this subject. Thank you!!
Wow thank you for the positive feedback
Thank you so much <3 But my 2005 model has soooo many more "cords" around the tank is a B to get out haha
Raul, thanks for a great video. I was able to figure out how to remove the passenger side panel. It was straightforward, and the video provided clear guidance.
It should be the same, except for the window switch. Once you get the panel of, look at the switch from behind the panel and un plug it
Ok
Great, and thank you, Sir
I lost my chip, if I buy another one does my car will start or do I have to buy anotherone?
no it will not start. you will have to have a locksmith or a key programmer program a new key/remote that comes with a new chip
Hi,This is Astra from Roadanvi . We are a brand specializing in car stereos, infotainment systems, and related accessories.I think your video is a great fit for our brand, I don't want to lose the opportunity to work with you, so I tried to contact you here. Are you interested in replacing the car's stereo for your car?I have already sent you an email.lf you interested, hope you can reply. Please send us your address to ship the package.
Very helpful
I had to take my daughter’s airbox out to change the headlight on that side her 2009 Volvo S60 2.5. I guess the electric vacuum pump switch on the 2.4 is different but anyways it cracked where it gets skinnier than a straw installing everything back together when the job was done so now I have to replace it too.
I know that the fasteners that hold the air box in place will break. Taking the airbox out does make the job that much easier
That does not look easy. I'm about to do it right now, let's see how it goes. Thanks for the heads up.
A four stroke valve in block screwdriver ? I don’t have any
Phillips head screw driver 👂
Hey what size socket or wrench is to loosen the belt to lose tension and get the alternator off 😊
Check out my other video on how to replace serpentine belt, i mention the tools i use to loosen the tensioner kzread.info/dash/bejne/fpmEvI-mfJe-Zs4.htmlsi=6-yExnVN-PFpShZu
@raiderman28 ok thanks I just wanted to make sure what size mine was mine ended up being a 15mm I just didn't wanna buy the wrong wrench lol Thanks for the fast response 👍
@@Mylotheblacknwhitecat 👍
Thank you very much, useful video! Side note, it would be nice to know how did you fixed the headrest, if you managed to make it work again :))
i didn't fix the headrests. This was a customer's car that i was tinting, and i needed access to the rear window. its possible there was a blown fuse, but he didn't want to pay me to check it out.
Thank you.
I said Nissan what so much money. I meant to say Toyota smh!!!
I'm having same issues mines 1999 3.0L when it gets to hot outside the ac compressor clutch won't kick on
Hummmm not sure what it could be. Usually i would check coolant temp sensor first
@@raiderman28 also the low pressure side house an evaporator are really hot to the touch when usually it could feel cold to touch
@@raiderman28 looks like removing the washer like in the video fixed it been to days today it was 100F an the ac stayed ice cold compressor isn’t clicking on an off constantly
Awesome, just the video I was looking for !! Thank you
I saw you were looking for the 2024 sentra… so the 2023 is the same as the 2024???
@@raiderman28 I believe so, I am going to give it shot! I appreciate all the help
This should work for a 2024 Sentra? I need to replace my drivers side mirror and I believe I need to remove the panel first. Thank you in advance
I am not 100% sure if the 2023 & 2024 are the same. I have not done the 2024 yet. If the panels look the same, then they should come off the same. These are usually not that difficult to remove
Thank you 🙏
Thank you for the video, I just got a 2021 Sentra, and the standard speakers suck! I'm not very car savvy, have no one to ask for help/guidance, and not a ton of money to pay someone to do it- so this helps a lot. Thank you!
He'll yeaa 🎉🎉
. Peace.. Shalom.. Salam.. Namaste 🙏🏻 😊 ✌ ☮ ❤ 🕊
This was helpful but incase u didn’t know there’s an opening under the handle so u won’t damage the interior when wedging the flathead.
I must have not seen it, but i didn’t have any issues removing it. But good looking out. I do alot volkswagons, and i do sometimes see the little cut out.
Great video! Best out there! Clear and concise instructions that were more than helpful. Appreciate it!
Do ypu know anything about the hose vacum system ?
There are alot of vacuum hoses on this truck. Usually you have to inspect each one carefully, to make sure they don’t have cracks
I meant those under the upper intake in my truck there is 4 on the back and 2 in the front but I'm missing some of the and I dont know where the plug into
@@CarlosGomez-sv4bk i do not know where they go. You might be able to look up how to remove intake, and they usually show the intake hoses
How does his hand fit and mine dont
I used this video for the passenger side, still a great and informational video. Thank you for sharing
My cd changer works but the load and eject mechanism stopped working properly so I can’t load or eject
Those units have issues with that. Thats why i made the video, to take out the cd’s for a customer. I don’t repair these
Oh ok i ordered a new cd changer do I have to disconnect the battery to replace the changer
@@supersamuel64 if your replacing the radio/ changer, you don’t have to disconnect the battery. But you will need the radio code, and if it a navigation unit, you will need two codes ( one for radio and one for navigation). A bit of a pain to input codes with procedures.
@@raiderman28it’s the non nav unit
@@supersamuel64 you will still need a radio code. If you get another radio make sure you have the new code for it.
Thank you for video and comment for change
Thank you Boss😎😎
Thanks for the video. Been looking how to remove the mirror as someone side swiped it and broke but not much info or videos on how to remove it. Was trying to avoid taking off the door panels just to end up finding out you didn’t need to, but you made it seem easy so I wouldn’t mind taking it off and going from there
I have a 2014 and something rattles inside that is driving me insane. Any clue what it would be
Could be a broken clip
@@raiderman28 I only hear at a high rate of speed
You have to take it apart to see if anything is loose or detached
Should I disconnect the battery before removing the window switches?
You do not have to
you the best saves mee in summer in floridaaa
This was the only video I found on KZread that helped me with my 98 SL 500, great and helpful video!!
Glad it helped. I almost didn’t make it. It was a last minute thing
What the part called
Pedal brake bushings. I wrote the name down in the description. 🤦
@@raiderman28 my bad thanks
I thought I could replace the shell, but your video helped me to KNOW I could. I was going to return these, as the Amazon ad deceptively made it sound like it had a chip slot (“Replacement for 4 Button Honda Remote Key Shell - with Chip Holder”), but 2-sided plastic carpet tape worked fine. The only frustration was in cutting the key blade out of the old shell: It was just tedious. Saved $250 from dealer quote (May 2024). $10 for 2 shells plus my labor. Thank you!
Love the way you corrected yourself about screws and nuts many mechanics today, you hear them say take this screw off and so forth they need to use the proper terms
I constantly “screw “that up. Hahahhahaha
Where did you get the plug from?
Dealership