Thank you so much! I followed your instructions, washed the diaphragm washer thoroughly and problem solved! Saved a visit from a costly plumber! You’re a lifesaver!
@lamc0 Жыл бұрын
Howsit! Thank you so much! My cistern was filling up in an endless loop. Just had to clean some limescale off of the rubber washer and it’s working as new! Taking the cap off was tricky but with a bit of careful upward force from behind while keeping the red lever down it came off like a charm!
@macgregor65113 жыл бұрын
I did it myself so quiclky and as easy as that according video instructions and my toilet is not wasting water anymore and I've nearly spent a lot of money for calling a plumber to replace a diaphragm washer. Thank you. Gregory
@aiglejungle9267
2 жыл бұрын
Great job But does't work with me i think the problem of joint waterstop What do u think
@macgregor6511
2 жыл бұрын
@@aiglejungle9267 I wonder why not, please view the video on You Tube again
@donaldklopper9 ай бұрын
Spot on. Thanks for posting this to help us DIY types fix our cistern blues...
@oupamphali74827 ай бұрын
Thank you very much, your video was so helpful. Been having this problem for over two months now and was sorted in an instant 👌🏿
@TheNads19732 жыл бұрын
Thank you! So easy to do and saved me a huge call out fee!
@nicosia12142 жыл бұрын
Hi thanks for the great video. Getting the cap off was a bit difficult. Took a few minutes. That's the hardest part lol. After that changed washer and all sorted. Builders express stocks these diaphragm washer. Paid about R55(31 dec 2021). Thanks mate.
@Skurafaso2 жыл бұрын
Thanks for the video it was really helpful & my toilet is fixed 👏🏽👏🏽👏🏽
@Cper20003 жыл бұрын
Thank you - good video my man
@lebogangshai934611 ай бұрын
Changed this today , all fixed thanks :)
@hannovanstaden78106 ай бұрын
Thanks! Great and useful video!
@tevinhendricks91114 ай бұрын
Thank you so much!!!! Saved me 1000 😭😭😭
@nicvanrensburg26323 жыл бұрын
Thank you so much it was helpful, especially to get the cap off without breaking it.
@gershinboesak6841 Жыл бұрын
Thank you for this video, I just washed and cleaned the washer problem solved.
@LovePeaceHappiness19686 ай бұрын
Thanks for the help so helpful....Appreciated
@yanzinsg Жыл бұрын
Thank you! Very helpful! The most difficult thing was to remove the cover - you need to "twist and pull" with considerable effort ))
@zibusisomasuku2 жыл бұрын
Helpful video. My toilet would not stop filling the cistern, so I opened up the mechanism, re seated the diaphragm It's quiet now. We get a lot of water cuts in Harare and the dirt brings in a lot of debri I guess.
@JoinMeInDeathBaby2 жыл бұрын
Thanks a lot sir!
@toast26103 жыл бұрын
That nut on mine was a bit tight. Had to use a wrench, but got it done in the end. If not for the video I would not have known how to get the cap off.
@matthewellis21102 жыл бұрын
The screw thread on a brand new filler valve is easy to come off but once it's been in service for years and needs replacing the limescale welds it shut. Love to see you twist mine off with "no tools"!
@SAND_ISO8 ай бұрын
thank you very much, succesfully replaced the rubber valve and the toilet is back to spick and span working condition.
@AllTheNamesAreGone3 жыл бұрын
Thank you. I was worried about getting the cap off without breaking it but I see now you have to be quite forceful
@Skurafaso
2 жыл бұрын
😅 Same here. But once you get the hang of it it works brilliantly.
@taylorduvernay9789 Жыл бұрын
I struggled to open that cap 😢. I will try again tomorrow
@geokerspey49582 жыл бұрын
THANK YOU
@jacobuskrynauw38688 ай бұрын
Piece of cake!
@spear-_2 жыл бұрын
This video makes taking off the grey cap so easy but of boy it's not. Been struggling to get it off for a while and I'm afraid i might end up damaging the whole mechanism Update: i ended up damaging the retaining nut. For those who may come across this, make sure the red part covered by the cap is tilted to a somewhat 45 degree angel downwards. This should prevent the retaining nut from breaking. Also when taking off the cap make sure to pull from behind
@yanzinsg
Жыл бұрын
I pry the cover from the bottom with a screwdriver - a dirty hack, but it helped me
@SAFECORD Жыл бұрын
Bro youra ledgend
@tonypanayotou48242 жыл бұрын
Would you advise the filosophy of work of the diaphragm valve closure, because I did what you advise in your video, with no success. The valve still does not clos
@Almamcgill2 жыл бұрын
Cannot get that cap off no matter what I do. Had to put the house on the market in the end.
@24257523 жыл бұрын
How do you know your diaphragm washer must be replaced? My toilet doesn't want to stop filling. I fixed it but then it started doing the same soon after that
@deepa5013 жыл бұрын
Hi I am really try so hard to get that grey cap off But cant Twisted and can't pulled out its look like stuck with glue
@Jay-ft7qt Жыл бұрын
I don’t have a Grey cap on mine. Is that my problem?
@richardanthonyclarke5255 Жыл бұрын
If you battle to get the grey cap off boiling, water will loosen the cap off ....1.7 liters once off pour over cold water....take off red pin first helps alot ...I kaked to get the grey cap off and floater if it comes off make sure it boyant otherwise water won't close
@rp8174
11 ай бұрын
Thanks - will try this.
@johannholzapfel6173 жыл бұрын
Hi I am really struggling to get that grey cap off. Twisted pulled but top not budging?
@wirquinmanufacturingsoutha5565
3 жыл бұрын
Hi, there, kindly email enquiries@wirquin.co.za with your area and contact details and we will assist you from there. Thank you!
@machachosflipzam2 жыл бұрын
Anyone have a case where the “pin” is nowhere to be found? Water just keeps running even with new washer…
@louisesakavuyi48363 ай бұрын
My cap is completely impossible to pull and water keeps getting wasted. 😢
@Cper20003 жыл бұрын
Awe my masekind duidelik!
@ArnieEllman3 жыл бұрын
I checked the condition of the diaphragm washer, and it looked fine. Not broken, or perished, even the small washer in the red arm was fine. Yet the water continues to flow into the toilet. What else could be the issue?
@wirquinmanufacturingsoutha5565
3 жыл бұрын
hi there, kindly email enquiries@wirquin.co.za and we will see to your situation asap
@shamo4895
3 жыл бұрын
Did you manage to repair it? In having the same issue
@wirquinmanufacturingsoutha5565
3 жыл бұрын
@@shamo4895 Good afternoon, Please email enquiries@wirquin.co.za and we will assist in any way we can
@jasonmarshall8673
2 жыл бұрын
Mine also looked fine, replacing did the job. The old one was warn out but still in tact.
@williamjvanloggerenberg65643 жыл бұрын
Where can i buy a washer?
@wirquinmanufacturingsoutha5565
3 жыл бұрын
Good day, WIRQUIN SA supply to all leading hardware and Plumbing stores country-wide.
@ameercader Жыл бұрын
How do you know when you need to replace the washer?
@lemmelemme313
Жыл бұрын
When the the JoyFill inlet valve is no longer stopping water from dripping into the cistern.
@ameercader
Жыл бұрын
@@lemmelemme313 thanks.
@leebee3554 Жыл бұрын
But why is it still overflowing
@SwordForex Жыл бұрын
Thank you my toilet is no longer leaking
@richardanthonyclarke5255 Жыл бұрын
Otherwise, it was a simple job barring 1 hour to get the cap and value off again. I had to use boiling water to loosen x 2, and only Ghent did it. it came loose and kept at it 👍
@aiglejungle92672 жыл бұрын
My toilet wasting a lot of water cause the valve does't clos i have to change joint waterstop
@phumeoli2 жыл бұрын
Man, thank you so much. American's has different mechanism, was not helpful at all.
@rp817411 ай бұрын
"Bending it forward, and twist, and pull" (@0,46) does not work.
@rp8174
11 ай бұрын
@richardanthonyclarke5255 - I will try the 1.7 litres (electric kettle) boiling water trick - ie pouring the boiling water on the cover-cap.
@Mohamed-sj2oz
3 ай бұрын
@@rp8174Did this work
@Mohamed-sj2oz
3 ай бұрын
@@rp8174Did this work?
@peterbrook42702 жыл бұрын
What is the cap for? Why can't you just leave the cap off. Save you so much hassle the next time you need to take it off.
@comancheflyer4903
Жыл бұрын
Leave it off. It doesn't serve any mechanical purpose.
@craigdeklerk309
2 ай бұрын
The cap prevents the water from splashing into your face😊
Пікірлер: 66
Thank you so much! I followed your instructions, washed the diaphragm washer thoroughly and problem solved! Saved a visit from a costly plumber! You’re a lifesaver!
Howsit! Thank you so much! My cistern was filling up in an endless loop. Just had to clean some limescale off of the rubber washer and it’s working as new! Taking the cap off was tricky but with a bit of careful upward force from behind while keeping the red lever down it came off like a charm!
I did it myself so quiclky and as easy as that according video instructions and my toilet is not wasting water anymore and I've nearly spent a lot of money for calling a plumber to replace a diaphragm washer. Thank you. Gregory
@aiglejungle9267
2 жыл бұрын
Great job But does't work with me i think the problem of joint waterstop What do u think
@macgregor6511
2 жыл бұрын
@@aiglejungle9267 I wonder why not, please view the video on You Tube again
Spot on. Thanks for posting this to help us DIY types fix our cistern blues...
Thank you very much, your video was so helpful. Been having this problem for over two months now and was sorted in an instant 👌🏿
Thank you! So easy to do and saved me a huge call out fee!
Hi thanks for the great video. Getting the cap off was a bit difficult. Took a few minutes. That's the hardest part lol. After that changed washer and all sorted. Builders express stocks these diaphragm washer. Paid about R55(31 dec 2021). Thanks mate.
Thanks for the video it was really helpful & my toilet is fixed 👏🏽👏🏽👏🏽
Thank you - good video my man
Changed this today , all fixed thanks :)
Thanks! Great and useful video!
Thank you so much!!!! Saved me 1000 😭😭😭
Thank you so much it was helpful, especially to get the cap off without breaking it.
Thank you for this video, I just washed and cleaned the washer problem solved.
Thanks for the help so helpful....Appreciated
Thank you! Very helpful! The most difficult thing was to remove the cover - you need to "twist and pull" with considerable effort ))
Helpful video. My toilet would not stop filling the cistern, so I opened up the mechanism, re seated the diaphragm It's quiet now. We get a lot of water cuts in Harare and the dirt brings in a lot of debri I guess.
Thanks a lot sir!
That nut on mine was a bit tight. Had to use a wrench, but got it done in the end. If not for the video I would not have known how to get the cap off.
The screw thread on a brand new filler valve is easy to come off but once it's been in service for years and needs replacing the limescale welds it shut. Love to see you twist mine off with "no tools"!
thank you very much, succesfully replaced the rubber valve and the toilet is back to spick and span working condition.
Thank you. I was worried about getting the cap off without breaking it but I see now you have to be quite forceful
@Skurafaso
2 жыл бұрын
😅 Same here. But once you get the hang of it it works brilliantly.
I struggled to open that cap 😢. I will try again tomorrow
THANK YOU
Piece of cake!
This video makes taking off the grey cap so easy but of boy it's not. Been struggling to get it off for a while and I'm afraid i might end up damaging the whole mechanism Update: i ended up damaging the retaining nut. For those who may come across this, make sure the red part covered by the cap is tilted to a somewhat 45 degree angel downwards. This should prevent the retaining nut from breaking. Also when taking off the cap make sure to pull from behind
@yanzinsg
Жыл бұрын
I pry the cover from the bottom with a screwdriver - a dirty hack, but it helped me
Bro youra ledgend
Would you advise the filosophy of work of the diaphragm valve closure, because I did what you advise in your video, with no success. The valve still does not clos
Cannot get that cap off no matter what I do. Had to put the house on the market in the end.
How do you know your diaphragm washer must be replaced? My toilet doesn't want to stop filling. I fixed it but then it started doing the same soon after that
Hi I am really try so hard to get that grey cap off But cant Twisted and can't pulled out its look like stuck with glue
I don’t have a Grey cap on mine. Is that my problem?
If you battle to get the grey cap off boiling, water will loosen the cap off ....1.7 liters once off pour over cold water....take off red pin first helps alot ...I kaked to get the grey cap off and floater if it comes off make sure it boyant otherwise water won't close
@rp8174
11 ай бұрын
Thanks - will try this.
Hi I am really struggling to get that grey cap off. Twisted pulled but top not budging?
@wirquinmanufacturingsoutha5565
3 жыл бұрын
Hi, there, kindly email enquiries@wirquin.co.za with your area and contact details and we will assist you from there. Thank you!
Anyone have a case where the “pin” is nowhere to be found? Water just keeps running even with new washer…
My cap is completely impossible to pull and water keeps getting wasted. 😢
Awe my masekind duidelik!
I checked the condition of the diaphragm washer, and it looked fine. Not broken, or perished, even the small washer in the red arm was fine. Yet the water continues to flow into the toilet. What else could be the issue?
@wirquinmanufacturingsoutha5565
3 жыл бұрын
hi there, kindly email enquiries@wirquin.co.za and we will see to your situation asap
@shamo4895
3 жыл бұрын
Did you manage to repair it? In having the same issue
@wirquinmanufacturingsoutha5565
3 жыл бұрын
@@shamo4895 Good afternoon, Please email enquiries@wirquin.co.za and we will assist in any way we can
@jasonmarshall8673
2 жыл бұрын
Mine also looked fine, replacing did the job. The old one was warn out but still in tact.
Where can i buy a washer?
@wirquinmanufacturingsoutha5565
3 жыл бұрын
Good day, WIRQUIN SA supply to all leading hardware and Plumbing stores country-wide.
How do you know when you need to replace the washer?
@lemmelemme313
Жыл бұрын
When the the JoyFill inlet valve is no longer stopping water from dripping into the cistern.
@ameercader
Жыл бұрын
@@lemmelemme313 thanks.
But why is it still overflowing
Thank you my toilet is no longer leaking
Otherwise, it was a simple job barring 1 hour to get the cap and value off again. I had to use boiling water to loosen x 2, and only Ghent did it. it came loose and kept at it 👍
My toilet wasting a lot of water cause the valve does't clos i have to change joint waterstop
Man, thank you so much. American's has different mechanism, was not helpful at all.
"Bending it forward, and twist, and pull" (@0,46) does not work.
@rp8174
11 ай бұрын
@richardanthonyclarke5255 - I will try the 1.7 litres (electric kettle) boiling water trick - ie pouring the boiling water on the cover-cap.
@Mohamed-sj2oz
3 ай бұрын
@@rp8174Did this work
@Mohamed-sj2oz
3 ай бұрын
@@rp8174Did this work?
What is the cap for? Why can't you just leave the cap off. Save you so much hassle the next time you need to take it off.
@comancheflyer4903
Жыл бұрын
Leave it off. It doesn't serve any mechanical purpose.
@craigdeklerk309
2 ай бұрын
The cap prevents the water from splashing into your face😊
Such a terrible design