Very fine video, and you showed the details and difficulties well. Thank you!

@TheDutchGarage

5 жыл бұрын

Thank you for your support, we try our best to show as much as possible.

Just found your vlogs and enjoying them. We have a saying in the UK, A Friend in Need is a Pain in the Arse.:) Nice one guys.

@TheDutchGarage

4 жыл бұрын

🤣 A very dry kind of pain

@charlesdale1462

10 ай бұрын

Bit like sex then.....

Heerlijk een man naar mijn hart , en ook nog de goeie spullen gebruiken Contitech is echt de beste

@TheDutchGarage

5 жыл бұрын

Dank! sommige dingen moet je niet willen riskeren Conti is ook vaak de goedkoopste A merk. Ook niet onbelangrijk voor een Nederlander.

Thank you guys. Your instructional process for replacing the timing belt was easy to follow and helpful. You just saved me $2k if I got a mechanic to do it.

@TheDutchGarage

4 жыл бұрын

That's a good chuck of money you saved! Glad that the video helpt you.

@Sensei948

2 жыл бұрын

@@TheDutchGarage Hi. 0.375 sync okay at 90C? 1.6 cayc

@TheDutchGarage

2 жыл бұрын

Do you mean ohm at 90c. If so I can't tel you. I just don't know.

@ionutmarin877

Жыл бұрын

On what planet is 2k to change the timing belt and water pump for 1.2 TDI? In my city is 200euro..

@TheDutchGarage

Жыл бұрын

That is really cheap, here it is about 800 euro I believe.

Great walkthrough guys. Helped me out a treat 🙌

@TheDutchGarage

Жыл бұрын

Great to hear. 👍

Brilliant. Gotta do this on my 1.6 TDi soon. Groot bedankt !

@TheDutchGarage

4 жыл бұрын

No problem, good luck!

@jadams3427

4 жыл бұрын

@@TheDutchGarage OK... Nearly done with the change. Just got to put on the multi-Vee belt and put back the top part of the engine mount. On the 1.6TDi I did not have an intercooler pipe in the way, and the particulate filter is not bolted to the engine mounting lower part. I drained the coolant when I took off the water pump. Only 1.5 litres came out from the engine. I recommend putting the car on axle stands at the front, so the wheel and arch liner can be removed. I managed on ramps, but the aforementioned would be easier. Next time I will make a special right angle short reach Torx T30, to ease getting the lower plastic cambelt cover off. Also, there is an unused eye on the lower engine mounting part, and I will cut it off next time. That part was very awkward to get in and out. I noticed I need to renew the exhaust pipe !

My 2015 golf TDI 2.0 CRUA is just turning 90k and just at the 5 year mark, gonna order the timing kit with studs and all hardware, diesel geeks kit in hand, only difference i see is the water pump is without teeth on it. Love my diesel, cant wait too start the job. Thank you, most helpfull video in english

@TheDutchGarage

4 жыл бұрын

Hopefully everything is going smoothly!

Very good steenkool English guys! Haha, blijft toch mooi om dat 'nederlandse' Engels te horen. Leuke tutorial ook trouwens. Jullie weten het dusdanig gedetailleerd te brengen dat zelfs een leek dit klusje kan uitvoeren. Good job!

@TheDutchGarage

3 жыл бұрын

Ja vreselijk, helemaal als het ook nog je eigen stem is 😅.

I don't know cars, and I got my skoda estate belt done by a garage. Having watched your video, I am happy what I paid. I knew it was a big job but watching you showed what's involved. Thanks !

@TheDutchGarage

5 жыл бұрын

Respect for that decision. Sometimes you can beter spend your money on the bigger jobs and save money on the smaller ones.

thank you so much i enjoyed . more work than i thought

@TheDutchGarage

Жыл бұрын

Glad that you enjoyed the video, it's indeed a bit of work.

Great explanation even though you are probably Dutch speaking ....thank you !

@TheDutchGarage

4 жыл бұрын

No problem, glad that you could follow it.

Thank you indeed for your nice and clear vidio

@TheDutchGarage

3 жыл бұрын

No problem, grad I could help.

Very good i have 1 6 tdi

Гарна робота! Вітання з Winterswijk

@TheDutchGarage

5 жыл бұрын

Thank you, Greetings from Groningen.

Great video! Thank you very much.. would you mind me asking what support bar you are using to hold the engine? As with my vw tiguan it seems that where the support bar will rest is very far away from the tabs that hold the engine. Many thanks again!

@TheDutchGarage

3 жыл бұрын

Hi there, it's just a standard chinees brace like www.ebay.co.uk/itm/Engine-Support-Beam-500kg-Gearbox-Bar-Double-Support-Traverse-Lifter-Car-Vehicle/133031891722?epid=0&hash=item1ef951930a:g:mjwAAOSwDSRdHIFE

Thank you 🙏 I have Ibiza 1.2 TDI ecomotive, and I need to change the timing belt, so I bought INA timing belt set + KWP water pump , but some people scared me that there is some chain for oil pump that also has to be replaced, so is it correct? Or I just leave oil pump and everything in state as it was before Thanks !

easier to get belt on if you don't fit tensioner in square slot just loosen nut on tensioner tensioner is free to move round giving you loads of slack on belt fit belt over pullies then use flat blade screwdriver push clip into square hole then tension up belt done loads this way much easier

Wonderful and knowledgeable video @TheDutchGarage 😇🙏

@TheDutchGarage

Жыл бұрын

Thank you, glad to hear that.

I understand why there are so many videos of this procedure. You need the video to get it back together in the right order!!

Thats a good work mate. My 2006 skoda Octavia 1.9 tdi diesel alh 5 speed manual just clocked 100k kms on odo. Need to change timing kit. Which is good brand? INA, contitech, Dayco or gates?

@TheDutchGarage

10 ай бұрын

I mostly go for conti or SKF or gates. But INA is decently a good brand Dayco I honestly never used.

Thanks for the awesome video! Do the 1.6 and 2.0 use the same torque specs?

@TheDutchGarage

5 жыл бұрын

Hi there, it is the same belt so it could be. But the torque specs can very between brands of timing belt so always use those.

@Sensei948

2 жыл бұрын

@@TheDutchGarage Hello, why does the timing synchronization change from 1.2 on a cold engine to 0.4 on a warm 90 C? Is the timing correctly installed? 1.6 tdi cayc engine ....

Great video. What is the size / type of socket you use to turn the crankshaft pulley?

@TheDutchGarage

5 жыл бұрын

Thank you, i looked it up and it is a 19 or 21mm 12 point bolt.

Awsome video, atleast now i know it is not a small job, i would do this myself but atleast i learnt something and got a quote for 6000 South African Rand to do the exact job hehehe

@TheDutchGarage

5 жыл бұрын

Respect for your decision! Also for that price that is not bad.

@jerryrawlings8885

3 жыл бұрын

Marco Struwig is that all? in the UK from a main dealer this job costs 10096.72 of your South African Rand £494 in Pound Sterling.

You should not disconnect any hoses to change a belt! remove the bolts and move the fuel filter and coolant bottle away above the engine.

@TheDutchGarage

5 жыл бұрын

You are probably right but at the moment it looked like the best option.

@Sensei948

4 жыл бұрын

@@TheDutchGarage hey in the 1.6 tdi cayc skoda octavia 2 fl 2011 engine I have driven 89 thousand km and 9 years need to change the timing drive?

@TheDutchGarage

4 жыл бұрын

@@Sensei948 This is what I could find. timing belt is 140,000 miles (225,000 kilometres) or every four years

great video! - im thinking i need to do this on my 2013 1.6 Golf TDI as my car has started overheating (guess the water pump has failed. i would be grateful if you could link me the correct tools for holding the cam / high pressure fuel pump / crank shaft's in position while doing the job? thanks in advance

@TheDutchGarage

5 жыл бұрын

Hi there, Thank you! Are you sure it is the water pump? most of the time you just need to burb the system or replace the thermostat. Please be sure to check that first. Much easier to do and cheaper!

@moomin110

5 жыл бұрын

@@TheDutchGarage thanks buddy I did investigate and it was definitely the water pump. The housing was also leaking so it's been replaced with the cambelt with help from your video!

@TheDutchGarage

5 жыл бұрын

Thats great to hear! Up to the next job!

Great video, thank you! I will be replacing the timing belt in my 2013 A3 8V 2.0TDi (CRBC), but haven't been able to find the right crank locking tool (I'm in the UK. Is the tool the same as the cool for PD engines? Most of the tools for sale on ebay here are described as being for PD engines and list all the old PD engine codes (BKD etc). Alternatively do you know of a part number I could search by? Many thanks

@TheDutchGarage

5 жыл бұрын

No problem, happy to help. This is a kit also for the CR rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F253168720914

@bigbadbenable

5 жыл бұрын

The Dutch Garage perfect, thank you! And cheap enough 👍🏼

@TheDutchGarage

5 жыл бұрын

Cheap is good👍

@vladimirart758

4 жыл бұрын

Benjamin Bass BMM code no??8v?

Where do You find all the tightening torque specs for different cars? Very good video!

@TheDutchGarage

5 жыл бұрын

Thank you, most of the time I look for workshop manual online or buy the book.

@kaiptaiboeg1298

5 жыл бұрын

Cant find anything for my mk4 Golf 1.6 online, maybe You could offer me something without buying the service manual?

@TheDutchGarage

5 жыл бұрын

Try this site. workshop-manuals.com/volkswagen/golf-mk4/brake_systems/technical_data/brake_allocation_via_pr_no./ Not the best looking site but it has a lot of data.

Id like to see how to replace timming belt on Golf 4 😀 i think is different.

Great video. I need to replace cam belt on 1.0 MPI Skoda Mk3. VW must put these engines in other models, Polo, Seat? Is the timing belt same as this 1.2 TDI Polo? Many Thanks

@TheDutchGarage

4 жыл бұрын

Thank you, but I must say that the engine is very different then sown in the video.

@paddy9021

4 жыл бұрын

@@TheDutchGarage Thank you perhaps it is me but finding a workshop manual for my skoda seems impossible. That was why I thought a Seat or whatever manual would do instead. Many Thanks

@TheDutchGarage

4 жыл бұрын

@@paddy9021 If it is the same engine then it would not be a problem.

Thank you. Can you explain why it is ok for the HP fuel pump to be off a little bit?

@charlesdale1462

10 ай бұрын

I believe it is because the pump maintains a constant pressure. The actual injection timing is controlled by electronically activated injectors

Hello, can you please tell me the bit size of the 4 screws XZN from the bottom poly? Is it a M8 or a M10? Thanks.

@TheDutchGarage

3 жыл бұрын

Most of the time i mention it in the video. I really can't tell on top of my head.

Great video, thanks! I have a question though: Your torque values do not match the ones in the video you postede a link to. He specifies +90degrees for the camshaft bolts and you only specify +45degrees. Which is correct? Br, Johan

@TheDutchGarage

5 жыл бұрын

That is a good question, i do have seen different numbers between different cars with the same engine. The best is to follow the instructions of the timing kit manufacturer. workshop-manuals.com/skoda/fabia-mk2/power_unit/1.6/55;_66;_77_kw_tdi_cr_engine/enginecrankshaft_group_pistons/removing_and_installing_a_v-ribbed_belt_and_a_toothed_belt/removing_and_installing_toothed_belt/installing_(set_the_timing)/ This is official not from the polo. but at least it has the same numbers as i mention. Sorry for the confusion, it just sucks.

@johanskou

5 жыл бұрын

@@TheDutchGarage I bought a Bosch kit, and they just state to look up the values in the electronic workshop manual which I of course don´t have access to... The bolts for the camshaft are the same diameter and have the same thread as the ones for the diesel pump, but they are shorter, so I went with 20Nm +45degrees. There are of course a few other things to take into consideration, eg. differences in material. You will let me know if Robbies polo suddenly starts to smoke a lot, right? :D

@TheDutchGarage

5 жыл бұрын

@@johanskou Robins car is still running fine. if not you are the first one to know. The car has some other issues though but that has noting to do with the timing belt. Good luck in your quest!

Fantastic video, was thinking of doing this job myself but have now decided to let VW do it for me, the job looks very difficult indeed for a part time mechanic like me. Oh, wouldn't it be great if we got rid of rubber Cam Belts, BMW use good old fashioned chains. The thing is this job costs about £500 at a VW dealership in the UK and needs doing every 5 years!

@TheDutchGarage

6 жыл бұрын

Hi, I've got great respect for knowing your boundaries. Chains are great but also have there issues like ratteling and the railguides break over time(plastic) also chains take more energie to rotate. 500 pounds is a lot of money the kit itself cost around 100 pounds I believe.

@JohnnyPaton

5 жыл бұрын

My local garage does the VAG timing belt and water pump for £300. On my Octavia 1.6 TDi CR the change interval is 140,000 miles.

@bobratu9029

5 жыл бұрын

no

@RandomShart

4 жыл бұрын

@@JohnnyPaton I think that Skoda also states 4 year time limit for engines before 2010, then 5 years for 2011 onwards. Not sure why they do short limit but they do it in UK. Lots of people confused and complain about this, like why every 5 years in UK but no such time limit in other countrie? Weird.

Good one, thanks

@TheDutchGarage

3 жыл бұрын

No problem.

Hi there, I'm soon to be doing this job, but I am so torn on what timing belt kit to purchase.. I see you have purchased the Continental belt kit for this video. What's your opinion on using their kits? Are they a good brand? I'm thinking of going for the same myself

@TheDutchGarage

3 жыл бұрын

Hi there, continantal is a great brand but SKF or Gates are fine brands also.

@MEGASilleh

3 жыл бұрын

I'll go with Continental like you say! Thank you!

@TheDutchGarage

3 жыл бұрын

👍

Ik heb de nieuwe studs . Hoe draai ik ze voldoende vast? Ook met 2 moeren? Of kan het geen kwaad om de oude te laten zitten?

@TheDutchGarage

4 жыл бұрын

Gewoon twee moeren contra draaien ( net als bij loshalen) en dan kan je ze prima installeren.

Can anyone tell me if you carry out a 10.000 mile chech and tell the garage that you think that your car is losing some violent would it be picked up on a visual inspection, completion and diagnostic check. Many thanks in advance.

@TheDutchGarage

6 жыл бұрын

If your car is leaking, then yes. But most of the time it is just a too big of a mess to really pinpoint the problem. But there is a possibility that your car is burning fluid.

I don't have the silicone grease for the waterpump gasket. What is the correct name , so i can order it ? Or can i use something else? And did you take the air out of the watercircuit via a nipple somewhere? Thx for the good video anyway .

@TheDutchGarage

4 жыл бұрын

Hi, for the gasket I used some RTV (liquid gasket) something like Wynns Gasket maker. I do not recall opening a other valve for burping the system. But most of the time if there is one it is at the bulkhead where the hoses for the interior heater are located.

@kurtvanbever7881

4 жыл бұрын

Ok thx . One more thing . You take off the studs with 2 bolts. But how do you tighten the new ones? My Clio belt doens't have these studs@@TheDutchGarage

@TheDutchGarage

4 жыл бұрын

@@kurtvanbever7881 If you don't have the studs then use the old ones.

What is the interval of cambelt on rapid 1.5 TD CR..

@TheDutchGarage

4 жыл бұрын

Hi, what i could find. 2012 and onward 210 000 km or after 5 years.

how to change the belt on a audi a1 2015 petrol 1.4L 150bhp ? thanks

@TheDutchGarage

4 жыл бұрын

If I ever have to do one I will make a video. But the changes are slim.

Is this engine similar to the 1.2 TDI in the Lupo 3L?

@TheDutchGarage

6 жыл бұрын

Sorry, but no. The high pressure pump part is missing. But for the rest it looks similar but it isn't the same.

Is this for the CFFB engine as well?

@TheDutchGarage

3 жыл бұрын

Yes but be sure to buy the right timing kit for your car.

hey in the 1.6 tdi cayc skoda octavia 2 fl 2011 engine I have driven 89 thousand km and 9 years need to change the timing drive?

@vlatkomafija

4 жыл бұрын

either 210.000km or 10 years, whichever comes first.

@Sensei948

4 жыл бұрын

@@vlatkomafija so the strap is not lifetime in 1.6 cayc? I am asking about age because the mileage is known?

@vlatkomafija

4 жыл бұрын

Sensei948 yup, it isnt lifetime and you should change it next year.

@vlatkomafija

4 жыл бұрын

Sensei948 its a timing belt not a chain therefore it has 10 year interval or 210k

@Sensei948

2 жыл бұрын

@@vlatkomafija Hello, why does the timing synchronization change from 1.2 on a cold engine to 0.4 on a warm 90 C? Is the timing correctly installed? 1.6 tdi cayc engine ....

Wow that is some shady tree stuff right there lol

@TheDutchGarage

5 жыл бұрын

Yes, yes it is.

So I followed this procedure and everything was aligned to TDC and my 2011 vw Jetta 2.0 cjaa isn’t starting. Any ideas? Thanks in advance!! I primed the fuel pump and other the the HPFP being a bit off I have no idea why it’s not starting..

@TheDutchGarage

3 жыл бұрын

That always sucks... feul lines backwards? Air in the feul lines? Maybe a sensor not connected?

@hardcore4476

3 жыл бұрын

Yeah it does suck. All sensors connected unless one has some dust in it. All lines are in the right place. However I didn’t cap of the fuel and dripped over night. Although I primed the pump idk?? 😕

@TheDutchGarage

3 жыл бұрын

I do think you have are in the lines.

@hardcore4476

3 жыл бұрын

@@TheDutchGarage Did you cap off your fuel lines on timing belt? Also how do I get the air out of the lines?

@hardcore4476

3 жыл бұрын

I primed the fuel lines like 40 times of 2 second intervals using xtool for vw,Audi,and skoda.

Hello boss, can u please tell me at what time should change timing belt of 2 TDI for the first time, how much km ?

@TheDutchGarage

4 жыл бұрын

Hi the 2010 and onward 210000KM believe it or not 2009 180000KM

@raychatwin5704

3 жыл бұрын

The Dutch Garage h

👍👍👍👍👍👍

@TheDutchGarage

5 жыл бұрын

👍👍👍👍👍👍 thanks!

Hi mate I had my timing belt Changed on a polo 1.2 tdi when it came back from the garage it had the glow plug light flashing and it’s keeps going in to limp mode but when I turn the engine of the light goes of for a bout 5 minutes then back on again I get a code p0087 fuel pressure to low do no what it could be

@TheDutchGarage

4 жыл бұрын

That sucks! Can be a lot of things. Air in the fuel system, fuel lines clogged or wrongly installed, pump timing to much off.

@1akaify

4 жыл бұрын

The Dutch Garage do think it could be the fuel pressure censor or the relief Valve

@TheDutchGarage

4 жыл бұрын

It ofcourse could be that. But you said that happened after the belt change. It would be a real coincidence that there is a problem with those things. It's more likely that it has something to do with the repair.

@1akaify

4 жыл бұрын

The Dutch Garage ok thank the reply I sent back to the garage to him today and he said the timing was of half a tooth but he said that wouldn’t make it run like that

@TheDutchGarage

4 жыл бұрын

Good luck. Hopefully it is something small. You don't want to get into a right/wrong game.

How many liters of liquid do you need?

@TheDutchGarage

4 жыл бұрын

I don't know exactly but if empty somewhere between 6 or 7 liter.

Hello i've changed my fuel pump and when i placed the timing belt back i hear a click sound when i turn it to the right. Can someone please help

@TheDutchGarage

4 жыл бұрын

It sounds like something is hitting when you rotate. Did the pump do that when you had it removed?

@diyahtot4259

4 жыл бұрын

@@TheDutchGarage Gisteravond dacht ik zal is gwn heel hard draaien en toen ging het weg. Ik had gelezen dat het misschien met een lage oliepeil te maken kan hebben. De distributieriem draaide wel volledig

@TheDutchGarage

4 жыл бұрын

@@diyahtot4259 Dat zou kunnen blij dat het opgelost is!

Weet u zo welke speciale vw doppen je nodig hebt? Hier bedoel ik de 12kants en 6 kants inwendig mee enz..

@TheDutchGarage

4 жыл бұрын

Volgens mij heb je alleen een 10mm tripple square nodig. als echt een speciale dop. Maar volkswagen wil ook graag 7mm inbus gebruiken. Nu weet ik niet zeker meer als ik deze dit keer ook nodig had.

Hi, Where the link to the video to put the timing belt on? I'm stuck, I can't fit it around all the pullies. Thanks

@TheDutchGarage

6 жыл бұрын

kzread.info/dash/bejne/mHWdmJhweJqzYrw.html. I will put it in the discription. Goed luck gabber!

@jamescotton7133

6 жыл бұрын

The Dutch Garage thank you for you response, been at it for the last 4 days. Having to pop out a buy certain tools I was missing. I've just got to get this belt back on, and then I'm done! Thank you for doing this video, thanks to you I'm changing my own timing belt!

The side bracket is the worst part off the job getting it in and out

@TheDutchGarage

4 жыл бұрын

That is absolutely true especially if you don't have a proper support bar.

Vw polo 1.2 engine mound bracket held with 16 mm not 17 mm 😊 he mistaken

@TheDutchGarage

5 жыл бұрын

Nooooo, I failed!!!! 😜

On how many km needs to change it??

@TheDutchGarage

4 жыл бұрын

Hi the 2010 and onward 210000KM believe it or not 2009 180000KM

@vladimirart758

4 жыл бұрын

The Dutch Garage Have x3 2010 -1 generation with 120k...(??) Greetings from Macedonia 🇲🇰

@vladimirart758

4 жыл бұрын

Tnx

Nieuwe aflevering van “ Buurman en Buurman “?

@TheDutchGarage

5 жыл бұрын

Klopt! Echter hebben wij geen budget voor 'Stop Motion' 😊. Bedankt voor het kijken👍

Die krukas klem zeg maar kan hem alleen vinden 1.2 tdi 1995 2005 maar hij is van 2011 pas die dan ook

@TheDutchGarage

3 жыл бұрын

Ik denkt het van wel, maar het beste is om even te checken op je motor code.

Megger instruments

May I ask what the engine code is please? We have a Polo 6R 1.2 TDI so would interested to know if its the same engine.

@TheDutchGarage

3 жыл бұрын

If i'm not mistaking CFWA.

@spannerssockets6308

3 жыл бұрын

@@TheDutchGarage Thanks for getting back to me. The CFWA engine is a common rail (CR) engine and needs a VW507.00 5w30/0w30 engine oil. I use Mann filters because they're OE for VW. I collect information like your video for how to on maintenance tasks. I use Gates timing belt kits but that's just my preference. Thanks for the video. If the EGR valve ever needs replacing, that would be an interesting video for you to make.

@TheDutchGarage

3 жыл бұрын

@@spannerssockets6308 I do believe he wanted to clean the EGR valve at some point.

Use in the uk also complain about the weather

@TheDutchGarage

3 жыл бұрын

The weather talk is always a issue .

can this be done by someone who has no experience doing such a job?, im not completely clueless about what's under the hood, i can name and point out most parts that are attached to the engine edit: okay after watching the video, you have tools that i dont have, so i better just pay someone who knows how :D

@TheDutchGarage

Жыл бұрын

There is no shame in that. Now you know.

@_monti142

Жыл бұрын

@@TheDutchGarage im thinking again about it, i think i can do it, i just need to buy 2-3 tools

15 years time when were all driving EV's ............ " Muahah hah hah hah !! ( great video though! )

@TheDutchGarage

2 жыл бұрын

I don't hope so! And thanks!

You didn’t use thread lock lol

@TheDutchGarage

6 жыл бұрын

It is already applied from the factory on the bolts that came in the kit. Thanks for watching.

Ты по русски сказать можешь???????????

@TheDutchGarage

4 жыл бұрын

No dutch.

so unprofesssional !

@TheDutchGarage

5 жыл бұрын

That is because i am not a professional. Thank you for watching!

@petecurran3995

5 жыл бұрын

You do one then, eh

@TheDutchGarage

5 жыл бұрын

@@petecurran3995 We love to learn right Pete. there is always a better way to do stuff.

@samohrabresrecaprati5432

5 жыл бұрын

@@TheDutchGarage friend i work in ford service and allways watching your videos you are great

@samohrabresrecaprati5432

5 жыл бұрын

@@TheDutchGarage friend i work in ford service and allways watching your videos you are great