How to replace a split hose on a Vax Blade floor head
Тәжірибелік нұсқаулар және стиль
In this video I show you how I fixed the split pipe on a Vax Blade floor head.
The replacement pipes are available on eBay and I paid £5.98 delivered.
Removal of the old pipe was a pain as it was bonded at the head end and took some time to remove.
Fitting the new pipe was easy, just a matter of screwing it in but note you need to screw it clockwise to remove it and anti-clockwise when fitting.
The instructions that came with the replacement pipe said it was just a case of unscrewing the old pipe but mine was bonded at the head end.
Пікірлер: 6
Great video , job done in a few short minutes
@DARTraderMediaProductions
28 күн бұрын
That's great to hear, pleased the video was of help and many thanks.
Cheers for this. I was struggling to get my old hose out. Seems both ends were bonded on my Vax Blade 4, but you gave the confidence to just rip it out. Now just need to somehow clean all the old gunk out 😂
@DARTraderMediaProductions
Ай бұрын
Pleased the video has helped you. Some early ones are not bonded but it seems the later models are. The cleaning is not fun that's for sure. Many thanks for you comment and good luck.
Thank you for the demonstration! I need a lie down after watching it 😂
@DARTraderMediaProductions
4 ай бұрын
I had a lie down after filming it.🤣🤣🤣