How to Replace a Gas Grill Regulator
Тәжірибелік нұсқаулар және стиль
Low flame on your Barbecue Gas Grill could be a bad regulator. Reset the regulator before replacing the regulator. The hose on the gas grill in this video kinked and restricted the flow of propane gas to the burners, causing low flame and a low heat condition.
There are hundreds of videos at Know How Now, subscribe so you can always find the channel…. It’s free. I always respect your time and do my best to keep the videos brief, but informative. Check out the channel with this link:
www.youtube.com/@Know-How-Now...
Disclaimer: Due to factors beyond the control of Know How Now, I cannot guarantee against improper use or unauthorized modifications of this information. Know How Now assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Know How Now recommends safe practices when working and or with tools seen or implied in this video. Due to factors beyond the control of Know How Now, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Know How Now.
Пікірлер: 58
You might be interested in this Know How Now video - Make Hard to Open Vinyl Window Slide Easily kzread.info/dash/bejne/fn-s26Oict3Ufrw.html There are hundreds of videos at Know How Now, subscribe so you can always find the channel…. It’s free. I always respect your time and do my best to keep the videos brief, but informative. Check out the channel with this link: www.youtube.com/@Know-How-Now/videos
Very efficient description and very helpful
Great video! Easy to see what and how to do it and very clear and concise explanations. The only problem I have in replacing the regulator hose is getting to the connection end of the tube under the grill on my old JennAir. Not much room to see it and get to it behind the door and under the front right side knob. Thank you
@Know-How-Now
7 күн бұрын
You are welcome. Welcome to Know How Now, thanks for subscribing.
Great explanation 👌
Super helpful!!
Great verbals. You were clear giving instructions and showed your work well thank you.
@Know-How-Now
8 ай бұрын
You are welcome. Thanks for the compliment, I try to make quality videos. Happy Thanksgiving if you celebrate it.
Thank you so much for this video!! I truly appreciate how thorough you are in explaining every step!
@Know-How-Now
4 ай бұрын
You are welcome! Thanks for commenting and watching the video.
Great video! Thanks!
@Know-How-Now
3 жыл бұрын
You are welcome!
It wouldn't come loose from the grill, Tried pb blaster. Tried for three days and it wouldn't budge. Finally asked my father for help. He said they probably put it on with locktight. He warmed it with a propane torch and got it off easy.
@Know-How-Now
2 жыл бұрын
Thanks for taking the time to share how you solved the problem, Dana. I love when people add comments like yours.
Thank you. I was not certain which way to turn to loosen. Your video helped.
@Know-How-Now
Жыл бұрын
You're welcome, Nelson.
@JLSchoenhoeft
Ай бұрын
But she didn’t say she said turn it this way and since we are on video I don’t want sure if we were looking at it backwards
Excellent, thanks!
@Know-How-Now
2 жыл бұрын
You're welcome, Don!
Excellent!!!
Very helpful. Thank you
@Know-How-Now
Жыл бұрын
You're welcome, it's my pleasure to help.
I am replacing my regulator hose because I've added a Little Griddle to the gas grill and require a little extra BTU. The new regulator has an adjustment valve on the regulator so that I have a range of 10 psi (standard from most factories up to 30 psi. I think I'll make my adjustments incrementally so I have hair left after the change .
Thank you
@Know-How-Now
Жыл бұрын
You're welcome
Love your voice!
@Know-How-Now
2 жыл бұрын
Many have joked that I am Jody Foster. lol.
@s3dchr
2 жыл бұрын
@@Know-How-Now Oh yeah, I can see the similarity!
Thank uuu
@Know-How-Now
2 жыл бұрын
You are welcome, Monica. It's my pleasure to help.
@monicavidal850
2 жыл бұрын
@@Know-How-Now 👏⚘👍
Thank you so much I reset my valve
@Know-How-Now
Жыл бұрын
You are welcome, Lynette.
Where have you been all my life ,I so afraid to do this!!
👍👍👍
The regulator hose that I removed had a compression fitting without any rubber gasket. However, the new one that I got from Amazon has the exact same fitting but WITH a rubber gasket? Anyone know what to do in this scenario? Remove the gasket? Keep it?
@Know-How-Now
22 күн бұрын
I'd try it with the gasket first. Brush soapy water around the connection to confirm it's not leaking. Try same thing without it if it leaks. If it leaks both ways.... back to Amazon it goes.
mine doesnt have that yellow fitting on the original grill side its the metal clamp thing directly to the tell so there is no way to diconnect it any ideas ?
@Know-How-Now
2 жыл бұрын
I'm not totally clear about your question. You are saying that there is no fitting on the hose where it connects to the grill?
@zaidchalabi1599
2 жыл бұрын
@@Know-How-Now yes its the metal silver piece before the regulator directly to the tee piece on grill which goes to the top cook side and where all burners come to it from other side no fitting
@Know-How-Now
2 жыл бұрын
My thought is to go to the manufacturer's website and look for replacement parts or look for a support phone number and call them. It sounds like you may have to buy a part there.
Hi any new videos coming up?
@Know-How-Now
2 жыл бұрын
Yes, I have some video clips for a few and haven't found the time to put them together. I had a crash on my bicycle in September that laid me up for a while. I am almost fully recovered.
@johnnywadd7960
2 жыл бұрын
@@Know-How-Now Hope your healing up...I enjoy the videos you put out.
👍🏻👏🏻 "Peanut Butter" Blaster really works, but the smell!! Yuck. Happy grilling. 😎😋
@AudiophileTommy
2 жыл бұрын
Yes ! You had better be outside when you spray that stuff !! I am surprised they haven’t put Febreeze in it since it’s in EVERYTHING else !
No thread sealant on your connection?
@Know-How-Now
10 ай бұрын
There is a gasket on the end, no thread sealant needed. If it were a pipe with tapered thread, then tape or sealant would be used.
@billwelch9431
10 ай бұрын
thanks@@Know-How-Now
🥳🥳🥳🥳🥳❤❤❤❤👋🙋♂️🙋♂️🍒
wish you would of showen the flame difference,.
@jackwilliams5474
Жыл бұрын
WOULD HAVE SHOWN not would OF SHOWEN. Come on dude.
@CryptoBates
Жыл бұрын
@@jackwilliams5474 bad day?
@jackwilliams5474
Жыл бұрын
@@CryptoBates All Days are great.
First.
First
Thank you
@Know-How-Now
Жыл бұрын
You're welcome