The key in this video was "after you cleaned the burners, you're not done". Telling me to clean the gas jets fixed my issue and was gold since other videos didn't touch on this. A big thanks!

@KillerKev1961

Ай бұрын

Me too dude!!!!!

After watching and reading a number of other resources that neglected to mention it, your tip about the gas release widget saved us from replacing our barbecue. Thank you!

Spent a crazy amount of time on the manufacturer's site trying to get this information. Thank you!!!

Thank you so much for this fix. I've been trying to fix my grills forever and never had luck. I have to grills I'm going to fix tomorrow. I just know this is going to work. :)

You’re right, my main problem was the valve. I didn’t even know it could be cleaned. THANK YOU!! Good as new!

Your air shutter is closed, that’s why you have a yellow flame, it should be blue. And your cooking will be faster

@hshlom

Ай бұрын

Air shutter? What and where is that?

Good video. I found a different issue with my project but this walk through gave me more confidence to take it apart and troubleshoot.

Very grateful for this video - 2nd tip at 1:30 forward has escaped me for decades - bad burner #4 is on my target list - thank you!

Thanks. I'm seeing 650f on my grill for the first time in years.

You Dah Man. Paperclip through the gas valve and my Weber was back in business and not in a landfill. Thanks much!!

Excellent....this has to be my problem because I take pretty good care of my grill. Now I am hungry for pork chops so that's gonna be my inaugural meal in honor of your culinary and technical expertise!

I had already purchased new burner tubes and heat distribution plates from Amazon when I stumbled across this video. I needed those parts as well but thanks for the video on what else I need to check before I put it back together. 👍🏾

@willi4ftramhagans303

11 ай бұрын

Just a quick add. This comment is 2 years old. My grill is still going. Two years extended life. I’ll take it. 👍🏾

DUDE! RIGHTEOUS!!!! Thank you! Couldnt figure out why my side burner wouldnt work. Clogged valve.....

Adding burner tube cover plates will help keep the burner tubes from getting clogged. Walmart sells universal ones also burner tubes.

I followed his tips and it worked wonders! Thank you 🙏

Very helpful. Mine is doing exactly that. Can’t wait to try this

Thank you very much.. most searches only say to change the regulator. My grill is about 25 years old. The burners are still good. Unfortunately I spent 50.00 on a new regulator only the find out the problem continued. One good flame. The other two burners very low. I will try cleaning the jets. Im sure now thats the problem.

My barbecue was 3 years old I was going to get the new one now I don't have to thank you so much for the tip😀

Thanks man cleaning the Nozzles did the trick 👍

I just did it cleaned the tube And works great. Thanks for helping us

@KooperSalmo

3 жыл бұрын

Awsome to hear

This fixed mine, it looked clean but i cleaned it anyways. works perfectly now.

Had a blocked jet on mine and cleaned out with a needle. Fixed. Thank you!

@Ryan-fm9uj

2 жыл бұрын

Paperclip didnt fit but needle did thank you!

Worked like a charm. Thanks!

Great tip thanks for posting!

thank you, my dad was ready to throw out a couple thousand dollar ducane and just buy another because it wasnt working right. and to him it being 5 years old is old enough to just replace! fixed it for him!

@KooperSalmo

3 жыл бұрын

Awesome that’s why I made this video

thanks for the complete repair well done thanks

Thanks for the vid, straight to the point, i like that

I have spent off and on all week tryin to get my gas grill to work. New burners but no gas getting to them. thanks this makes sense

Great help video. Got me going in the right direction 👍thx

Very helpfull. Thanks for the video.

Thank you! That was so helpful!

Thank you so much, I was about to give up on our Grillmate BBQ which has not been used for years and it was not heating it. I will try to clean the tubes and see if it solves the issue.

Great video. Saved me some serious money!

Great tip, thank you

Thank You Men

Thanks man u really helped out ,,,good advice

Thanks sir. I wont be throwing out the grill!

Thanks for the tips. Looking at your flames they were yellow not blue. Might need to adjust the air intake on the tubes. Again thanks

THANK YOU!!! I worked!!!

Thanks, your video was very helpful, I was going to replace the burner, but now after watching your video I realize it’s clogged.

Great video!

Thank you .. i used a pin to clear the oil from hole. That tiny valve was just clogged up bad. My bbq works like new again. Thank you

@KooperSalmo

3 жыл бұрын

Your welcome making videos helping people makes it all worth it

Thank you sir very helpful

Most epic grill music ever 👌

Just fixed my grill with these methods, due to the accessibility I skipped the part where you clean the little orifice at the valve. I shook all the crap out of the tubes but only shaking out the tubes and not cleaning the holes. I reassembled the grill and that didn't work. I disassembled the grill parts again and punching the holes out did the trick, grill works fine now. thanks

@KooperSalmo

Жыл бұрын

Excellent!

Nailed it !!!

Excellent procedure for an annual clean up

Thank you for your video. I will do per your instructions.

Thanks man good advice ill be doing all that to my girl tomorrow,,,don't wont to do it just right now ive already had to many beers ,,,,

Thank you 😊👍🏼

Appreciate it bro!

Thanks buddy!

I'm trying this tomorrow. Thanks for the video

@benb2199

2 жыл бұрын

My issue was where the rubber hose connects to the grill. It was clogged. Great video grill works perfect again.

Thanks so much!

I can Dig it.. thanks Bro! 👍

Thanks Man !!

I used compressed air to clear the burner tubes, but I’ll have to go back and check the valves. It works much better now, but could probably use some more TLC. I was hesitant to remove my burner tubes because mine are a pain to access. Great video!

Why the flames are so red/yellow? Looks like the air mix ratio is low..?

Thanks man

I subscribed to your channel watching this video. You have explained this very lucidly a layman like me can understand

@KooperSalmo

2 жыл бұрын

Thanks

I just replaced the burner tubes on my Weber and was disappointed to see the first burner is still not lighting. I think your tip about the manifold valve will likely solve this. I wasn't aware they screw off. Thanks for the tip.

@cwohughes

5 жыл бұрын

Stephen Craig I’m having the same issue, did this fix your problem?

I'm going to try this...

I was only getting about 300F. My grill had a tube in the rear that fed gas from the left burner to the others. it was half full of rust chunks. I cleaned that tube out, but the REAL secret is to fully pressurize the manifold BEFORE opening the burner valves. Wait about five seconds (after opening the tank valve) before you open any burner valves. Got her up to 520F yesterday!

@devbra5585

2 жыл бұрын

Whats the manifold

@fenderstratguy

2 жыл бұрын

@@devbra5585 OK, if you follow the line from the gas tank to the front of the grill, it feeds into burner one. Then at the back of burner one, there is a tube across the back of the grill that feeds propane gas to all three burners. And that tube is known as the manifold.

@devbra5585

2 жыл бұрын

Thank you okay yes i understand but why would pressurizing the manifold for a few second work ??? If the output of the cyclinder is fixed then why would opening the cylinder first before turning the burners on work ???

@GoldenOuroboros

Жыл бұрын

@@devbra5585 Don't know if you've worked this out, found this recently myself while doing a bit of research, apparently the regulator on the hose has a safety built into it. If it thinks there's a leak it'll limit the gas flow. If this is the case you'll need to disconnect the hose from the gas bottle and let it rest for 30 secs, that'll reset the valve in the regulator. Reattach turn on the bottle first, then your burners.

Good video

Your welcome im glad it fixed tour grill

Did you use pipe dope when you out your orifices on? I just redid a grill with brand new valves and orifices and not getting pressure. Double checked manifolds and no leaks. I'm wondering if I clogged orifices with pipe dope

Great...I have the exact same BBQ and it has the exact same problems! Thanks for solving and sharing that! Thumbs up!

I’ll clean it out this weekend!

Just sent this to my bf to get working on this. He wants to get rid of it already but no way, let's try this before. Thanks for posting.

@mira2987

5 жыл бұрын

Still have bf?

@Alonilove1

5 жыл бұрын

@@mira2987 Yes!

@majidsoltani8588

4 жыл бұрын

Get rid of bf and go to home depot or lowes and get a new one! you're welcome.

U rock

I’ve had bbq 10 years old and no problem. My new one 2 years blocked.

This video didn’t help me but I did inspire me to disable the top and retried it and worked. Lol

I always find a spider web covering the jet. And yes, I'm turning off the propane tank valve when I'm finished.

@robinbrooke8052

4 жыл бұрын

Probably have a spider living in there

I’m actually dealing with the opposite problem and I’m going through an entire bottle every 2 weeks. I turn it off after each use otherwise it seems to last even less. Is there a way to adjust something under there to slow it down? Sometimes I have to leave my burners on low and even then it spikes up over 400.

Thanks for this video… I fix mine……

Maintenance on any equipment should be done at least yearly if used occasionally. If it's used year around it should be done every 3 month at the most. Get to know you're equipment, it's an investment. If you don't take good care of it like car, it will not last. If you love to cook! You also need to not mind doing the cleaning too.

People like you are why other people think I know how to do things

Need flame dampers to cover your burn tubes

You just save me 300 dollars! Thank You! You are invited to my next BBQ Cookout!

@KooperSalmo

4 жыл бұрын

thanks just trying to help people fix stuff with these videos please gimme a thumbs up

Gonna try this on my free and poor propane grill.. Need to get at least 1 good bbq out of this thing..

Would drilling the flame holes bigger a couple of mm help for more heat, after its been cleaned?

@KooperSalmo

Жыл бұрын

I’ve never tried that. I wonder if the flame would be too intense

Every year spiders get into my burners and jets and clog them up with webs n gunk.

Thanks for the video, but turn down or get rid of the music. It’s hard to hear you sometimes.

The screw you had to remove with heat what is it for? is it a mix adjustment screw.My Charbroil grill has one on the bottom side of each burner tube they are badly rusted and on removal no longer fit. Burner is giving an orange flame and maxing out at 350.

@KooperSalmo

3 жыл бұрын

No that screw only holds the burner in place

@clemkonan

3 жыл бұрын

@@KooperSalmo On my Charbroil there are 2 screws a top cross over plate screw holding down the plate that spreads the flame across burners and on each burner a bottom screw that seems to restrict the orifice of the burner tube as you turn it in hence my idea it makes a richer or leaner gas mix. These bottom screws are pretty much shot.

Natural gas

Also the burners can be replaced for cheap, and u won't get smokey flames anymore

@KooperSalmo

3 жыл бұрын

Thanks

Unfortunately I can't take that little tube like you did with yours.

Overall you helped people "I'm sure" however your flame shouldn't be yellow you are not cooking a efficient burn so just to tell you your just a tad off

@cariocafl

2 жыл бұрын

Agreed. Next to the burner (what he called “tube” should be a screw where you slightly adjust the oxygen mixture. Turn it slightly either side until you get a nice bluish flame. That yellow flame means there’s too much air in the mixture and will add soot to your food.

@CainnechK

Жыл бұрын

@@cariocaflNo fucking way. I no u want a blue flame but ur telling me there’s an adjustment screw on a bbq grill. How am in 38 and just learning this

@SG-er8cx

Жыл бұрын

​@Cainnech lol I'm like you but 50

@elephantgrass631

Жыл бұрын

@@CainnechK This is better hidden so the you think “well, guess I better buy a new one”. They gotta make money somehow.

I have spark and gas but will not light. I can use a lighter but will not start with igniter. Any ideas?

@KooperSalmo

2 жыл бұрын

Try using sandpaper between the contact

You flame looks like it isn’t getting enough air.

What did I do without this for so long?2 pieces of French Toast at a time ?20 minutes for 10 pancakes ?NO MOREthis griddle is awesomeTook some time to season before first use kzread.infoUgkxHM5jmQoi4dbb0hoWSBs9hPhSwXUbGVG_ did brunch and hibachi dinner on Mother’s Day and it worked like a charmSturdy, well built and heats up quick. burners2-4 were a little stubborn but then lit up.Great addition to my patio.Bought the cover and it’s great, also bought the accessories kit - scraper is good but the spatulas are flimsy to be honest that’s my only negative.

Mine has been like that since new. Wastes gas instant but really low flame that goes out with any slight wind

@ramirezramirez1140

2 жыл бұрын

Same did you find the problem

@SexyBulldozerMan

2 жыл бұрын

@@ramirezramirez1140 i found that when you open the gas, you need to open it slowly. turn it slow. then just use the handles to set it where you want. if i open the gas fast thats when i have a problem.

@ramirezramirez1140

2 жыл бұрын

@@SexyBulldozerMan thanks

@chipsammich2078

2 жыл бұрын

@@SexyBulldozerMan sign of a junk/cheap regulator.. Buy you a nicer adjustable one and try that..

What is the part that the gas goes through called

@majidsoltani8588

4 жыл бұрын

It's called "gas goes through thingy"!

@weejohnbb

4 жыл бұрын

Orifice

My grill is doing this after one season knew I shouldn't of bought a home depot junk grill 🤦

@KooperSalmo

2 жыл бұрын

Yes never buy a nexgrill sold at Home Depot the catch on fire seriously beware of that brand

@ray.a7343

2 жыл бұрын

@@KooperSalmo yes and I can take it apart like the video because it's connected to not be taken apart

Your flame 🔥 must be blue not red keep the air

I’ll leave a 👍if it works… deal?

Dude microphone noise.

wish to see bbq's problem begin of the video.....so compare can compare before and after. Thanks anyway.

@KooperSalmo

4 жыл бұрын

I wish i would have thought of that but the grill was headed for the trash and i decided to make a video after i fixed it back to new so i thought i would show people the problem and how to fix it

too late I already bought the second Grill

Oh man, WHY the distracting music?