Replacement display available at store.minitools.com/en/sepdisp32-lcd-display-adaptable-to-ford-focus-c-max-s-max-galaxy-kuga-mondeo.html

What is the backing piece that you "unstick" from the old unit and on the rear of the new LCD? thanks

@MinitoolsChannel

2 жыл бұрын

Hi, that is a backlight diffuser.

Do I need protection discs to do this, or can it done by hand? Thx

@MinitoolsChannel

2 жыл бұрын

Hi Ejaz, to avoid damages to the gauges faces we always recommend to use to protective discs, you can find the large ones at the following link store.minitools.com/en/sep-pro01a-protective-disc-for-instrument-cluster-gauges-faces.html And the small ones here store.minitools.com/en/sep-pro01b-protective-disc-for-instrument-panel-gauges-faces.html

Hola se puede cambiar el color de difusor de luz a uno más moderno?

@MinitoolsChannel

11 ай бұрын

Hi, we’re afraid we can’t help you as we only deal with repairs, not modifications.

Can you give me link to buy ford garage protecters plz thank you,and also iv brought second cluster dials , iv changed the cluster but got beeping sound continues coming from guage ? Any help

@MinitoolsChannel

2 жыл бұрын

Hi, here are the links for the gauge faces protective discs: LARGE: store.minitools.com/en/sep-pro01a-protective-disc-for-instrument-cluster-gauges-faces.html SMALL: store.minitools.com/en/sep-pro01b-protective-disc-for-instrument-panel-gauges-faces.html Regarding the beeping sound, could you please send an email to info@minitools.com with more details? Thank you

Hello, could you tell me the pins I need to connect on a bench power supply to light up the gauge dials please, I've connected pins 32 and pin 2 and I can only get the dials to move screen to come on. Is there an easy way of finding what pins do what preferabley without the vehicle thank you for you time

@MinitoolsChannel

2 жыл бұрын

Hi Tim, please send an email at info@minitools.com with more details.

@wildstyle42

2 жыл бұрын

I've sent email but comes back as no such user

@MinitoolsChannel

2 жыл бұрын

Hi @@wildstyle42, we did receive your e-mail and replied, please check your inbox.

I have a similar problem with lcd screen but if I disconnect battery and reconnect the screen is back to normal

@MinitoolsChannel

3 жыл бұрын

Hi! Usually if the display looks bad, the problem comes from the display, but maybe you have another fault on Ford instrument cluster

@scottishlad6490

3 жыл бұрын

Same did you sort it ? Mine goes like fully blank but then sorts itself

@scottishlad6490

3 жыл бұрын

@@MinitoolsChannel it gos blank but still is back lit strange only happens sometimes

i notice that u didnt mark the position of the hands before removing, is it ok to do this

@MinitoolsChannel

6 ай бұрын

Hi, yes if it helps you can mark the position before removing the needles, just make sure not to damage the gauge face.

Con che tensione bisogna alimentare il quadro strumenti?

@MinitoolsChannel

4 ай бұрын

Salve, pin 32 (positivo) 12 V, pin 7 (negativo) GND.

Hello sir very nice video ,can you send the part number for the replacement display thank you. In advance

@MinitoolsChannel

3 жыл бұрын

Hi! You can buy the display at store.minitools.com/en/sepdisp32-lcd-display-adaptable-to-ford-focus-c-max-s-max-galaxy-kuga-mondeo.html Thank you!

Ford mondeo 4 ford mondeo do not work all the arrows on the dashboard. Where to look for the reason?

@MinitoolsChannel

Жыл бұрын

Hi Tatyana, could you please send us a picture of the instrument cluster’s motherboard and explain the defect in detail by email at info@minitools.com?

@tatyanamizun8216

Жыл бұрын

@@MinitoolsChannel Hello! Already found the reason - everything works!) Thank you! X

@tatyanamizun8216

Жыл бұрын

Hello from Ukraine! X

Avrei visto volentieri il video direttamente su KZread in italiano.

@MinitoolsChannel

2 жыл бұрын

Ciao Simone! Avendo un pubblico Internazionale, abbiamo scelto di caricare i video in lingua inglese, in quanto KZread ad oggi non permette il caricamento dell’audio in più di una lingua. Ad ogni modo il link al video in italiano è sempre disponibile in descrizione!

That's not the problem, changing display will not solve the problem. It will reappear.... there are some resistors with bad soldering joints. Of course, you will need a very good microscope to see where the problem is...

@MinitoolsChannel

Жыл бұрын

Hi, most of the times the issue is related to the LCD screen and not to the resistors, and when the issue is actually related to the resistors, the display needs to be replaced anyway, as it wouldn’t work even after fixing the soldering joints. If after replacing the display with our SEPDISP32 the issue persists, our technical assistance would guide the customer to identify and fix the bad soldering joints.

@uscovu

Жыл бұрын

@@MinitoolsChannel well, I've repaired at least 50 pcs of this clusters and only one requested display change because it was smashed. So, try to debug the motherboard and you will find out that all displays are good and its all about bad soldering joints. Cheers.

@MinitoolsChannel

Жыл бұрын

Ok, if you should ever encounter the issue to the LCD, which is actually very common, we’d be happy to supply you the display!

@hamham4547

Жыл бұрын

​@@uscovu hello how can I contact you I need help with this problem?

@a.c.b6468

9 ай бұрын

can you help me with that also? i can pay to you for info, no problem, thanks