Thanks mate for a very informative, easy to understand video. Ordered the part online here in Australia, got it for $130, popped it as you directed and we are back in business. Massive thanks again, last callout cost me $450, part and labour.

Hi thanks for your video. We owe you a beer. The dishwasher stopped working Christmas week, couldn’t get a service person until 2nd week of Jan. It was great to be able to call statewide with a part number, they had it in stock and picked it up the same day. The replacement went smoothly and we are up and running again. Cheers!!

Thanks a lot. I had my dishwasher fixed immediately after watching this video. Got the relay from eBay with $120 plus postage.

Fantastic vid thanks - just one for the fellow home handyman - the screws are a torx type head

Thanks so much for this! Love the Aussie can-do attitude :-) I located the relay board on my dishwasher as per your video, and discovered the blade contacts were corroded. I managed to clean them up carefully with a small file, and bingo, dishwasher is working again. Very grateful!

@countrylifeonthecoast4167

Жыл бұрын

Fantastic! Glad the video helped and well done on your fix!

Thank you. Changed the Relay. Working well so far. Mark (Electrician)

Fixing error F24 - Just disconnect the dishwasher power cord from the power point overnight and reconnect next day. Start the dishwasher and Voilà :) Worked for us 7-8 times.

@countrylifeonthecoast4167

Жыл бұрын

This is the best fix I have heard of, great job! I had done that once or twice with ours, but then the F24 code wouldn't go away.

@sunnyxroblox0

5 ай бұрын

Just had the error message wouldn't work at all turned it off at the PowerPoint turn it back on again working a treat

Thanks! The video helped me a lot by guiding me where to look for the problem. Instead of buying a new relay, I cleaned its terminals and reinstalled it. The dishwasher works like new ;)

Thanks a lot for a valuable demonstration

thank you was able to fix my dishwasher greetings from Belgium

Thank you! Saved me a lot of time and effort!

Thanks for the video, I had this error and your steps helped me fix it easily!

Thank you. Gave the relay a tap and removed /refit contacts and now working normally.

@countrylifeonthecoast4167

Жыл бұрын

Nice work!

Very helpful. Thanks mate

Our machine has a leakage somewhere (F70 i think), we got rid of that but a few drops of water managed to leak into the relai. We took it apart and dried it but that didn't do the trick, so we're waiting till tomorrow. Hope it works. Thank you for the video👍

Merci pour ton aide 👍

Great video thank you!

Thanks - Very useful!

Thank you !

Verry good video. Thank you verry mach.

Thank you so much, fixed!! Noosa electric had the part so fixed in 24 hours 😁😁😁😁😁😁

@countrylifeonthecoast4167

Жыл бұрын

Great to hear! Good to support local businesses too!

Thanks !!!!😊

Thank for that, I'll try that later

Helpful! And not one single curse word during the repairs, and with a smile. I have not begun the repair, we got flooded and hoping the relay is just wet and not fried. Update: after airing out for 24 hours the F24 error did not come up, thankfully!

@whodat9198

Жыл бұрын

I thought Miele claimed to have double leak protection. How did it flood??

Thanks for video! And for cat :)

Legend

just fixed mine, was as easy as it is in this video, for 2 of the side screws I needed to take the 2 legs off first as I did not have a ratchet.

Спасибо друг, помог!!!

Thank you! Service tech said cockroaches in the electrics and the dishwasher wasn’t worth fixing. I cleaned the circuit board of cockroaches poop and bingo it’s working again!

Top vid Sean - tomorrow's Saturday morning job for me. Already got local Meile page open on the replacement relay part, if I need to order a new one. Some interesting previous replies in respect of turn it off for 24hrs or tap the relay...interesting to see if that works, or whether its delaying the inevitable replacement of the relay. All The Best, G

@countrylifeonthecoast4167

3 ай бұрын

Hope it went well! The relays are normally what needs to be replaced or repaired. Turning it off for a short period of time can work but in my experience, not for very long.

@tomorrowsTomorrow

Ай бұрын

@@countrylifeonthecoast4167 Have to say Miele dishwasher is rubbish tbh - relay switch problem for my third / fourth time now Anyone recommend a better make - thanks

Hi, Thanks for the video. Do you know where to find heat relay component for G1272 SCVI dishwasher. i too have F24 error seens from last two days. Thanks

Thank you very much. I replaced the part. Now when I switch on the error does not appear. When it stops filling the water it blows the main fuse of the house. Is it the heater now, what do you think?

thanks for pointing us to it. the relay's are no different to ones I have laying around! Also the flow sensor that I paid over $200 for is only a magnetic reed switch that are under $2!!! not a year out of warranty it is a disgrace. my chinese machine before it never cost a cent in repairs. Miele don't even care

Hi mate this is very helpful. I had a f14 code which has morphed into an f24 code. Have you ever seen this where the f24 code follows the f14 code?

@countrylifeonthecoast4167

Жыл бұрын

No, sorry

@tschuuuls486

Жыл бұрын

Just fixed mine, this can be caused if the heater relais coil is open or unplugged. Also worth to check the pressure transducer on the main pump, they may start to leak water and create a resistance between the middle and one of the outer pins.

probably a good idea to seal the relay with some desiccant in a ziplock bag or something, that thing's designed to catch every bit of splatter raining down from the top and error out so miele can collect their tax

I have the same issue - sometimes I get the error message and sometimes I don't.

I have this problem on mine. The fact that it only happens on rainy days made me think it's a moisture related problem. So far my fix has been to run a heater fan to blow hot air under and around the dishwasher for an hour or so then F24 goes away. When this trick stops working, I'll try replacing the relay. Problem also started after 12months. I hate how you can't even buy extended warranty from HN or GG - good dishwasher but horrible warranty.

@countrylifeonthecoast4167

Жыл бұрын

Yes, I hear you. The dishwasher works well, but we shouldn't have these issues anyway. E

F24 error. Ran dishwasher using "Energy save" mode instead. I guess it doesn't use the heater. Problem solved, short term at least. 🙂

@acobraco9027

Жыл бұрын

Fixing error F24 - Just disconnect the dishwasher power cord from the power point overnight and reconnect next day. Start the dishwasher and Voilà :) Worked for us 7-8 times.

@bhudson39

Жыл бұрын

@@acobraco9027 Thanks. Will try that!!

@bhudson39

Жыл бұрын

@@acobraco9027We have an F12 error now. I have switched off for 10 minutes, but not overnight. 🙂

I already changed relay but dish washer stopped again having error code F24.

Where did you order the part please We are not handy but Miele want $400 to fix so better to try this

@countrylifeonthecoast4167

2 жыл бұрын

Hi Marianne, Sorry I meant to put that in the video description. We bought it from Statewide Appliance Spares, it was Part Number: 09053390. Hope that helps. Kind regards Shaun

So I changed the heater relay but I am still getting F24 error. What now

L'errore F24 può essere causato anche dall'eccessiva umidità nell'aria.

@alfaepsilon1

9 ай бұрын

confermo. Me ne sono accorto quando ho cominciato a montare pressostati e relays vecchi :-( , compreso il primo cambiato da Miele ufficiale. Tu hai esperienza di Miele? Ho un nuovo problema che non trovo codificato

Just tried this repair, and the error still comes up :-( The element circuit was fine (near 0 Ohms), so changed the relay part for ~$170 Still get the F24 error on a Miele G6100. Wife is unhappy, please help!

@fs8976

Жыл бұрын

near 0 Ohm is not the value he is showing. and this dont make sense... you should measure sth the 20-30 Ohms

repair the relais board: kzread.info/dash/bejne/nX5_lsaEgNC6Y5c.html

Mieke sc 1222 demonteren

Mine was a lemon. $2300 dishwasher lasted barely 5 years. The drain motor wouldn’t stop running. Replaced non return valve. Wasn’t the issue. Took out the drain pan. Bone dry. Replaced floater switch. Nope. Opened the controller board - bingo. The board burned out the plug (the 7 connector plug) connected to my drain motor. The motor refused to stop draining. Paid Miele $300 only for them to tell me it’s cost another $1200 to fix. Are you for reals??? They blamed me for user error. What the what??? How on earth do I burn out the controller board? Don’t buy Miele. They claim they have such great reliability but mine didn’t last 5 years. Trash. I threw out that $2300 paper weight and bought an LG.

@trf9463

2 жыл бұрын

I hope you get spar parts after 2 years from LG. Regards, Tony

@johnleo6201

2 жыл бұрын

@@trf9463 The brand new LG dishwasher I bought cost $990. The main board part that Miele wanted to repair my 5 year old washer was $770. Labor, sweat, stress, tears not included. If Miele is going to charge nearly as much as a brand new dishwasher for a part, then it really doesn’t matter if they provide parts for years, does it? Cheers.

@terencecooke3531

Жыл бұрын

@@johnleo6201 MY MIELE IS 30 YEARS OLD, AND WORKS LIKE A CHARM IT HAS NEVER CAUSED ANY PROBLEMS

@Susan70003

Жыл бұрын

@@terencecooke3531 Tell us your model/serial number so I can look for a used one. You never know when someone remodels and they will give them away. tia

Go to Jacar get your own relays .and make up a new board ......BETTER THAN THIS MIELE CRAP!!!!

@countrylifeonthecoast4167

3 ай бұрын

Thanks for the comment. I agree replacing the relays would be a great way to do it. Can you advise what model relays to get from Jaycar to help others?