How to remove the rear bumper Ford Mustang 1994-2004
Автокөліктер мен көлік құралдары
Support my Channel here! / dannyjohnson
Bumpers available here:
www.amazon.com/gp/product/B07...
Here is the Haynes Manual if you want it for your project
www.amazon.com/gp/product/156...
If you enjoyed this video and wish to donate $5 to support my channel, please visit the following link!
www.paypal.com/cgi-bin/webscr... Donation Support
This video shows how to remove the rear bumper
Disclaimer: I am an amazon affiliate and may receive a commission for sharing the link, but the price will be the same for you.
Пікірлер: 84
I wish all tutorials were so clear and quick like this one. Thanks!
@dannyjohnsonsgarage
7 жыл бұрын
M Giovanni thanks 😉
Great video sir. No BS. No rambling on. Just a factual and to the point. Thank you
@dannyjohnsonsgarage
6 жыл бұрын
Vincent Vega thanks. I try to be descriptive, but also to the point. Thanks for watching
I just replaced my bumper with the help of your video, thank you so much for making this.
@dannyjohnsonsgarage
7 жыл бұрын
Isaiah Dunnaville you're welcome! Check out all my other videos. Glad it helped
Amazing tutorial! Straight and to the point, but doesn't leave anything out. Great job!
@dannyjohnsonsgarage
5 жыл бұрын
Drew Cook Thank you. Glad you enjoyed it
Excellent job. Even I was able to understand and see what you were doing.
Great video. It sure helped. I’m stuck at getting the screws out by the tire. I need a smaller screwdriver.
@dannyjohnsonsgarage
6 жыл бұрын
Pranks313 yeah, if it helps you can take the wheel off and have plenty of room
thanks for getting straight to the point! looking forward to replacing my rear bumper quickly and effectively!
@dannyjohnsonsgarage
6 жыл бұрын
Alex Lopez yep. Thanks for watching
Great video. Took rear bumper cover off of 97 and was able to easily replace rear side reflectors
This was spot on. I pulled off my 2004 cobra’s bumper for fresh paint and it was exactly the same. The only thing that was different was the drain was just hanging down there.
Thank you for the tutorial, is so clear! I already removed and installed a new bumper.
@dannyjohnsonsgarage
5 жыл бұрын
Great! Glad you got it. Thanks for watching, and feel free to see my other videos
Definitely need to subscribe for this very detail help and Info
Hi, Danny. I just wanted to say thank you a lot for this video. I had to take my bumper off to check something out, and I just did it with the help of your video, I took it off and put it back on like a pro. Thank you, I just saved $135.
@dannyjohnsonsgarage
5 жыл бұрын
Yanny Fragoso Sweet. Glad to hear that. Thanks for the comment 👊🏼
@yannyfrag
5 жыл бұрын
@@dannyjohnsonsgarage No problem, thank you again. 👊
Great video! Thanks.
Great video. Thank you
Hey man great video just used it to take off a bumper as well
@dannyjohnsonsgarage
6 жыл бұрын
John Bennett Cool. Thanks for watching !
Great video helped me out a lot.👍
@dannyjohnsonsgarage
4 жыл бұрын
I’m glad you found it. Thanks!
Other videos would explain the reason of having a bumper and why there are many nuts to hold it. Thanks straight to the point.
Awesome tutorial man. Going to try to look for a steal on a cobra rear bumper.
@dannyjohnsonsgarage
5 жыл бұрын
Texan 2v Nice
Perfffect video! Removed it in 25 mins!
@dannyjohnsonsgarage
7 жыл бұрын
Angel Martinez nice!
Perfect video, thank you so much sir
@dannyjohnsonsgarage
5 жыл бұрын
Love You Too Man Glad it was worthwhile. Thanks for watching
thanks buddy nice video
@dannyjohnsonsgarage
7 жыл бұрын
miguel lopez thanks! I need to do a front bumper one soon
Cool instructional video
@dannyjohnsonsgarage
7 жыл бұрын
06141984 thanks
great video
@dannyjohnsonsgarage
4 жыл бұрын
Thank you
Just wanted to say 2 thumbs up. I'll b able to exactly know where to go for the bolts & get my bumper off.
@dannyjohnsonsgarage
6 жыл бұрын
Glad it helped out. Thanks for watching!
Helpful video thank you
@dannyjohnsonsgarage
6 жыл бұрын
thanks for watching. I’m glad it was helpful
thank you very helpful and well done
@dannyjohnsonsgarage
5 жыл бұрын
Thanks for the comment and thanks for watching my video 🙂
Great tutorial
@dannyjohnsonsgarage
5 жыл бұрын
Nigrisshi Thank you. Feel free to see my other videos
Gracias amigo por tu video
@dannyjohnsonsgarage
6 жыл бұрын
Pedro Pérez De nada amigo. !Gracias por ver mis películas!
I try putting a new one on and where them screws fit into the back of the car going into the trunk where theres 3 holes the bumper cover has like 8 screws how am i supposed to fit it on when them screws run right into the back of the trunk
scrun Johnson have a question is the same process for 03 04 rear cobra bumper? thanks for all your videos.
@parsasalmasy
4 жыл бұрын
I’m 3 years late but I’m pre sure it is lol
Just took one off of a 2000 gt car, there are 6 bolts instead of 3 in the trunk and is not a direct swap to a 2001-2004. Just letting you all know. Great video though!!
@dannyjohnsonsgarage
6 жыл бұрын
PVT GHOULBERRY may have been since the v6 bumper doesn't have exhaust cut outs
@saycheesestupid
6 жыл бұрын
Danny Johnson it was a gt car
you should have more views
@dannyjohnsonsgarage
7 жыл бұрын
cat destroyer yes, please share my channel 😉
So just need a 7/16 Deep Socket and a molding removal tool, oh yeah and a screwdriver
Thanks for this. my rear bumper is discolored and I'm sure I'll be taking it off at some point. this will come in handy. what about the front bumper? will you make a video on how to take that one off?
@dannyjohnsonsgarage
7 жыл бұрын
Non Ya yes, I'll make one for the front bumper, but not sure exactly when. Jeep subscribed and you'll see it when it comes up 😉
@nite82hawk
7 жыл бұрын
Thanks man. I'll be on the lookout for it.
Do the tail lights need to come out to remove the bumper?
@dannyjohnsonsgarage
7 жыл бұрын
Brandon Burke I never tried keeping them in, but I would strongly recommend removing them as not to scratch the bumper
Will a 03 Cobra Bumper fit on a 99 Cobra?
@dannyjohnsonsgarage
7 жыл бұрын
Brandon dsadasdas yes it will fit
One more thing , is it the same on a cobra ?
@dannyjohnsonsgarage
5 жыл бұрын
Yes
Do you have to remove the headlights to remove the bumper?
@dannyjohnsonsgarage
3 жыл бұрын
RC_Swift Headlights for the front? I recommend it kzread.info/dash/bejne/l2ufvJJsmLPfqJc.html
@rc_swift1772
3 жыл бұрын
@@dannyjohnsonsgarage I'm asking about both but since you did it for the back that's why I'm asking.
Anyone know if a 1998 will fit on a 1999?? I searched online sites that say 1999-2004 are compatible. Thanks!
@dannyjohnsonsgarage
6 жыл бұрын
I've seen someone do it, but there are gaps.
Man the 1998 mustang rear bumper is much more easier to remove i believe it just has the 3 pins on the bottom and 2 screws on the sides
How do I take off a quarter panel
@dannyjohnsonsgarage
4 жыл бұрын
Nathan Baer It does not bolt on. It has to be cut and a new piece welded on
Thank You I'm going to have to replace my bumper because I can't get the damn stripes off of the plastic Grrrrrrr
@dannyjohnsonsgarage
6 жыл бұрын
sweetbrandigirl Good luck. Shouldn’t be too bad
I dont understand y u have to remove the tail lights ... must have missed something great video
@dannyjohnsonsgarage
5 жыл бұрын
It’s not entirely necessary, just less likely to scratch the bumper. You can skip that step if you want
@budman1072
5 жыл бұрын
Oh k thanks for the reply
I'm pulling and it's not coming off
@dannyjohnsonsgarage
3 жыл бұрын
Is everything removed as it’s shown in the video
@MustangGal004
3 жыл бұрын
@@dannyjohnsonsgarage you know I must of missed some of the video. Cause I missed where I said take the clips out of the bottom and the other 4 screws on the side 🤣🤣 it was bright out and I couldn't see or hear much. But we finally got it. This video was great by the way thank you!