How to Remove Take Off a 1999 - 2004 Ford Mustang Front Fender
Removing a front fender on a 1999 2000 2001 2002 2003 2004 Mustang
Жүктеу.....
Пікірлер: 50
@Dragon24509 жыл бұрын
amazing! Thank you! I just got a Mustang SVT Cobra and needs a little TLC and now I not as afraid to start pull off the messed up front panels and replacing.
@miguelserrano64728 жыл бұрын
Thanks I really enjoyed your video, it was very informative and to the point
@dixiianaman7 жыл бұрын
Thank you so much for this video such a big help.
@krispyfinesse2676 жыл бұрын
why the hell are your keys in the ignition while do this, you'd think after about 1 min of the beeping you would take them out
@ChuckV192
6 жыл бұрын
Krispy Finesse oh my god, this is so central to the whole point of the video.... what are we ever going to do now?!
@krispyfinesse267
6 жыл бұрын
ChuckV192 you don't need you're keys to open your door and remove at least 98% of these bolts if at all
@ivanhoeg76075 жыл бұрын
Very helpful!! Thank you!!
@adamdongle94646 жыл бұрын
Very helpful video 👍
@micahmoore38543 жыл бұрын
Thank you for the diagram😭🙏🏼
@2vgod4602 жыл бұрын
Did yours have one shim or 2 or 3 mine has 3 2001
@alexandernevarez93493 күн бұрын
Reason why im watching this is cause ima wrap my fenders with carbon wrap.
@lastmoto777
2 күн бұрын
Sounds cool. Best of luck with the wrap.
@waylangoddard71787 жыл бұрын
Is this procedure nearly the same for 1994-1998 Mustangs as well? I have a 1997 that I am replacing the fender on as it is damaged badly.
@lastmoto777
7 жыл бұрын
Yes it is very similar. The edge body is just a slightly revamped version of the previous body style. Good luck with it.
@juanramirez7742 Жыл бұрын
Si algui sabe donde se ubica el vin de un ford mustang gt 2002 aparte del para brisas y dela puerta y drla guantera sime urge saberlo porque nolo pude Rejistrar
@United_Stangs7 жыл бұрын
Before I do this does it just slide back on? Or is it somewhat loose until I hook it back up? I'm trying to swap my door so if you have any info on how to do that it would be appreciated.
@lastmoto777
7 жыл бұрын
The door is heavy so I would see if someone can help with it.Its easy to damage a door or tweek the hinges if you lose control of the door.Best of luck with it
@gusvilla33228 жыл бұрын
can't seem to take off the small piece of trim on the bottom, there was no bolt, but it's on there really good and I don't want to break it
@lastmoto777
8 жыл бұрын
There are four plastic clips that push in through mounting holes that you just need to pry out first ( pry the whole trim piece with the plastic push clips still in ). You will use a pretty lot of force, but you shouldn't break anything. . After they are removed pull it forward and it will come off. Good luck with it !
@gusvilla3322
8 жыл бұрын
+lastmoto777 thanks for the reply, I pulled it pretty hard, but still didn't come off, I didn't have the right angle or leverage to pull them out. Might give it another try next time I get a chance.
@aldogonzalez9228 жыл бұрын
can you make a video on how to take off one of the rear fenders
@lastmoto777
8 жыл бұрын
The rear fenders are beyond the ability of the average do it yourselfer. There is cutting & welding involved. Thats kind of a Body shop type of repair. Good luck with it.
@lilant60367 жыл бұрын
Color code? Pls
@bestman3967 жыл бұрын
Will any fender from a 99-04 work on my 04 fender
@lastmoto777
7 жыл бұрын
Yes, its all the same body style.
@carolinahockeybay118 жыл бұрын
What if I can't open my door.... The fender is jammed behind the lip of the door a small amount
@minieatsu
8 жыл бұрын
lol I have the same dam problem!!
@lastmoto777
8 жыл бұрын
IDK, Maybe you can remove all the bolts you can get to, and then try to bend the fender toward the front; or cut it if you can. just try not to damage the door in the process.Best of luck with that.
@isidroc.2507
5 жыл бұрын
Loosen the 3 bolts on top of the fender then use a flat head screw driver to push it back then tighten them back up
@tonymurray90529 жыл бұрын
Do u know how to do a rear quarter panel
@jscrock13
9 жыл бұрын
Tony Murray I'm not sure about the 99-04 specifically, but I know the 94-98s are welded on. You can't just unbolt them.
@rhrg1003 жыл бұрын
whats the name of the parts behind the fender
@lastmoto777
3 жыл бұрын
Fenderwell. I am not exactly sure what part you mean.Best of luck with it.
@Thatsn95girl9 жыл бұрын
Do the rear fender
@newedgefrank3257
5 жыл бұрын
ThatSN95Girl the rear fender??????? Are you on drugs?
@gabrieltrevino63598 жыл бұрын
do you have to remove the wheel
@lastmoto777
8 жыл бұрын
No, you dont have to take the wheel off. I just did because its a little easier to get to the inside nuts on the bumper bracket. Either way will work. Good luck with that.
@gabrieltrevino6359
8 жыл бұрын
+lastmoto777 ok cause I got a dent and don't want to go to a shop so I'm going to push the dent out
@Aj_0400
8 жыл бұрын
Update?
@brianmef716 жыл бұрын
Why did you take it off? I didn't see anything wrong with it.
@isidroc.2507
6 жыл бұрын
Brian M shut up
@zerkfiter
5 жыл бұрын
@@isidroc.2507 i was wondering too..why not tell us why?
@JCapJCrew6 жыл бұрын
Fuck all that. I'm just gonna paint it with it on.
@quintonbahm95437 жыл бұрын
M
@andrethegiant20809 жыл бұрын
white guys use extensions hahaha I a mexican use ingenuity lol half way opened the door and I unscrewed the top fender screws letting it come off easy , fit my hand and into the gap in between door and fender and I unscrewed it off less than 10 sec it woulda took me 20 to find that dammn extension lol.
@andrethegiant2080
9 жыл бұрын
Hahahaha you got it bro.
@ForkyOrc
7 жыл бұрын
i dont think being white has anything to do with it, if you have the tool why not use it? really just comes down to prefrence
@Helljumper7200
6 жыл бұрын
ForkyOrc It probably doesn't. But why waste the money? A real man uses his brains
@TheHoss4145
6 жыл бұрын
A real man has all tools required AND brains...
@doubletapproductions
5 жыл бұрын
@@TheHoss4145 And buying tools is like buying car parts to me lol
Пікірлер: 50
amazing! Thank you! I just got a Mustang SVT Cobra and needs a little TLC and now I not as afraid to start pull off the messed up front panels and replacing.
Thanks I really enjoyed your video, it was very informative and to the point
Thank you so much for this video such a big help.
why the hell are your keys in the ignition while do this, you'd think after about 1 min of the beeping you would take them out
@ChuckV192
6 жыл бұрын
Krispy Finesse oh my god, this is so central to the whole point of the video.... what are we ever going to do now?!
@krispyfinesse267
6 жыл бұрын
ChuckV192 you don't need you're keys to open your door and remove at least 98% of these bolts if at all
Very helpful!! Thank you!!
Very helpful video 👍
Thank you for the diagram😭🙏🏼
Did yours have one shim or 2 or 3 mine has 3 2001
Reason why im watching this is cause ima wrap my fenders with carbon wrap.
@lastmoto777
2 күн бұрын
Sounds cool. Best of luck with the wrap.
Is this procedure nearly the same for 1994-1998 Mustangs as well? I have a 1997 that I am replacing the fender on as it is damaged badly.
@lastmoto777
7 жыл бұрын
Yes it is very similar. The edge body is just a slightly revamped version of the previous body style. Good luck with it.
Si algui sabe donde se ubica el vin de un ford mustang gt 2002 aparte del para brisas y dela puerta y drla guantera sime urge saberlo porque nolo pude Rejistrar
Before I do this does it just slide back on? Or is it somewhat loose until I hook it back up? I'm trying to swap my door so if you have any info on how to do that it would be appreciated.
@lastmoto777
7 жыл бұрын
The door is heavy so I would see if someone can help with it.Its easy to damage a door or tweek the hinges if you lose control of the door.Best of luck with it
can't seem to take off the small piece of trim on the bottom, there was no bolt, but it's on there really good and I don't want to break it
@lastmoto777
8 жыл бұрын
There are four plastic clips that push in through mounting holes that you just need to pry out first ( pry the whole trim piece with the plastic push clips still in ). You will use a pretty lot of force, but you shouldn't break anything. . After they are removed pull it forward and it will come off. Good luck with it !
@gusvilla3322
8 жыл бұрын
+lastmoto777 thanks for the reply, I pulled it pretty hard, but still didn't come off, I didn't have the right angle or leverage to pull them out. Might give it another try next time I get a chance.
can you make a video on how to take off one of the rear fenders
@lastmoto777
8 жыл бұрын
The rear fenders are beyond the ability of the average do it yourselfer. There is cutting & welding involved. Thats kind of a Body shop type of repair. Good luck with it.
Color code? Pls
Will any fender from a 99-04 work on my 04 fender
@lastmoto777
7 жыл бұрын
Yes, its all the same body style.
What if I can't open my door.... The fender is jammed behind the lip of the door a small amount
@minieatsu
8 жыл бұрын
lol I have the same dam problem!!
@lastmoto777
8 жыл бұрын
IDK, Maybe you can remove all the bolts you can get to, and then try to bend the fender toward the front; or cut it if you can. just try not to damage the door in the process.Best of luck with that.
@isidroc.2507
5 жыл бұрын
Loosen the 3 bolts on top of the fender then use a flat head screw driver to push it back then tighten them back up
Do u know how to do a rear quarter panel
@jscrock13
9 жыл бұрын
Tony Murray I'm not sure about the 99-04 specifically, but I know the 94-98s are welded on. You can't just unbolt them.
whats the name of the parts behind the fender
@lastmoto777
3 жыл бұрын
Fenderwell. I am not exactly sure what part you mean.Best of luck with it.
Do the rear fender
@newedgefrank3257
5 жыл бұрын
ThatSN95Girl the rear fender??????? Are you on drugs?
do you have to remove the wheel
@lastmoto777
8 жыл бұрын
No, you dont have to take the wheel off. I just did because its a little easier to get to the inside nuts on the bumper bracket. Either way will work. Good luck with that.
@gabrieltrevino6359
8 жыл бұрын
+lastmoto777 ok cause I got a dent and don't want to go to a shop so I'm going to push the dent out
@Aj_0400
8 жыл бұрын
Update?
Why did you take it off? I didn't see anything wrong with it.
@isidroc.2507
6 жыл бұрын
Brian M shut up
@zerkfiter
5 жыл бұрын
@@isidroc.2507 i was wondering too..why not tell us why?
Fuck all that. I'm just gonna paint it with it on.
M
white guys use extensions hahaha I a mexican use ingenuity lol half way opened the door and I unscrewed the top fender screws letting it come off easy , fit my hand and into the gap in between door and fender and I unscrewed it off less than 10 sec it woulda took me 20 to find that dammn extension lol.
@andrethegiant2080
9 жыл бұрын
Hahahaha you got it bro.
@ForkyOrc
7 жыл бұрын
i dont think being white has anything to do with it, if you have the tool why not use it? really just comes down to prefrence
@Helljumper7200
6 жыл бұрын
ForkyOrc It probably doesn't. But why waste the money? A real man uses his brains
@TheHoss4145
6 жыл бұрын
A real man has all tools required AND brains...
@doubletapproductions
5 жыл бұрын
@@TheHoss4145 And buying tools is like buying car parts to me lol