►NEW UPDATED VIDEO: kzread.info/dash/bejne/c4SclLuTdpaucZs.html - TORQ10FX: bit.ly/3MTxcqo - VSS Scratch and Swirl Remover: bit.ly/3NeTcgT

@CaptainFrost_

Жыл бұрын

I love how they show him continuously polishing the entire step and none of that timelapse bs other channels pull on you where they could be days between scenes and take it to a body shop. That was just so damn peaceful listening to the gentle whirr of the machine. Like for that

@schwarzkelloggs

3 жыл бұрын

Indeed. I wouldn’t be able to gauge if I’m doing too long or too short when I do it otherwise

@candyapplez3438

2 жыл бұрын

I like it too. Gives you an idea of how long and hard you need to go on an area

@elijahclark6093

10 ай бұрын

​@@candyapplez3438thats what she said

Tried the clay bar on my mother in laws face.. Even the dual polisher didn't help. Still looks like a Rottweiler.

@miket2607

5 жыл бұрын

Remember what the saying is......Want to see what your lady looks like in a few years, check out her mom. Good luck my friend.

@thewhiteshadow7466

4 жыл бұрын

Hahaha!!

@jamespeek6991

4 жыл бұрын

is it wrong that i, laughing?

@user-hw1jf8rm1k

4 жыл бұрын

Thank you that’s a new insult so for me

@AngelLopez-lw4mu

4 жыл бұрын

@@miket2607 what if you want the mom

Don't forget your chemical guy's "oxygen" so you can breath while doing this

@MrAdrian13

7 жыл бұрын

Brandon 32123 😭😭

@flawns

6 жыл бұрын

highly underrated comment

@angelocolonna2552

6 жыл бұрын

Dead.

@lanesteele240

6 жыл бұрын

Brandon 32123 it is only 45.99

@Frenchyk

6 жыл бұрын

😂 😂 😂

Thank you for not speeding up the video. Showing the realistic time shows the dedication it takes. But so worth it!

@rand49er

3 жыл бұрын

Agreed! Too many comments about sleeping. I'd rather see the actual time dedicated to this particular opinion on paint correction. Thanks!

@spacep0d

2 жыл бұрын

Agreed...and I appreciate the lack of music throughout the talking and polishing portions. It gives some clue as to how hard the detailer is pushing the polisher into the clearcoat.

@XSDX3R0

2 жыл бұрын

It's great, it shows that you have to put the time and effort. Some people out here really think you can polish your car in a couple minutes. In reality it takes time!

Did he mention that it cuts like a compound and finishes like a polish??

@johnnycardinell8060

3 жыл бұрын

Read this as he said it 😂😂

@codyallensiebert

3 жыл бұрын

Me too lmaoo

@josebracamontes3524

2 жыл бұрын

Me too lmaoo

A few weeks ago I purchased a two year old car that was covered in swirl marks. After watching a few of your videos I decided to take on this challenge. I purchased a PorterCable, 3 pads (Green, orange and the polishing pad) and a bottle of Vss. I started with the green pad in a small area, even though it removed some of the swirl marks I believed it could be better. Time to try the orange pad. To my amazement it removed all the swirl marks. The Leather cleaner and conditioner also works great. The car looks like new. Thank you.

@percweno1949

11 ай бұрын

Is it really that easy?

@byronbrimstone5163

2 ай бұрын

Did the result last?

Legend has it, he is still polishing this car today!

@Youpeakpanish

5 жыл бұрын

Jeff Banfield 😂😂😂

@trevorbarnett2226

4 жыл бұрын

I loled😂😂 I didn’t realize it takes that long

@YourHuntingBuddy

4 жыл бұрын

He was on it too long. 4-5 passes would have been enough.

@mortjoer

3 жыл бұрын

Yep, just checked and the champ's still going..

@bleeneo101

3 жыл бұрын

😂😂😂

Can I use VSS to polish away the miserable memories of my ex gf?

@integrafreak1

8 жыл бұрын

+Proteus6684 for that you need Megs 105 with wool pad.

@MarkNOTW

8 жыл бұрын

+Proteus6684. No, external use only...

@ollielanch1092

8 жыл бұрын

+Mark L hahahahahahahahaha

@Arek_R.

7 жыл бұрын

Nope, you need to use sand blaster...

@Proteus6684

7 жыл бұрын

Luka Arko lmao

Best no BS polish job I've seen on YT. This guy knows his stuff. Very impressive results!

Very subtle with the marketing, I like it!

I have a 2010 GTI dark charcoal grey with swirl marks. Looking into using this product it should work great. Did a fantastic job on the Nissan Z, Great videos Chemical Guys.

Love the SS and V line polishes. Been using them in the shop for a few years now with great results. Also recently started using blacklight and makes the paint beyond brilliant. My after pics look like mirror selfies

@ChemicalGuys

6 жыл бұрын

Awesome, John! Post those pics up on IG and tag us so we can see! Thanks for being a part of the Chemical Guys family!

8:00 If you’re having trouble sleeping 💤

I allways watch this shit and never do any of it lol

@bretrobert4012

5 жыл бұрын

christopher serna haha so true

@PearlDrummerFTW

5 жыл бұрын

That is me today. Left my hose outside. Someone stole it. Fml lol. Its Florida 90+ outside and its gonna suck.

@HDA_III

3 жыл бұрын

Just pay someone to do it

@HDA_III

3 жыл бұрын

I pay someone once every few months

@beachdetectingireland3984

3 жыл бұрын

Same

Awesome, thorough video. Thanks!

These products really work, and the videos show you step-by-step how to do it. Really appreciate you! Thank you! 😎👍🏽

@ChemicalGuys

2 жыл бұрын

Enjoy your detailing products!!

That's awesome man!! I enjoyed it. And u can hella tell the difference.

It seems this new "diminished abrasive" technology is the only way to go. So fast and easy. Finally a product that gives what it promises. No fancy packaging and hype just results!

Great video man.. I'll give it a try in my detail shop soon.

Id like to thank you guys at Chemical guys for doing demonstrations & explaining how each product works in all your videos. They are all professional grade demonstrations & straight to the point leaving out any unanswered questions. I live in West Tx & at times it is very difficult keeping my black vette clean from all the blowing dust. I can not wait to get my hands on this product. Thank you guys for your awesome videos & tutorials totally a 5 star rating. Please keep posting videos on your products Liked & subscribed!!

@ChemicalGuys

6 жыл бұрын

Hi there Chris, it's going to be a fun and wild ride in 2018 and we're happy you jumped aboard. Welcome to the Chemical Guys family! -CG Family

@LNMD93

Жыл бұрын

Is this ok on black cars as well??? Every spot shows!!

Great vid! Stumbled upon it as I was just browsing, but need this done on my melbourne red bmw 328i xdrive asap! Very in depth and just subscribed to your channel. Good work!

@ChemicalGuys

5 жыл бұрын

Hey Rob! Glad you enjoyed the video, happy detailing!!

Great video! Thx! just a quick question, do i need to change or wash the polish pad during the whole car polishing process?

This was FAST & SIMPLE. Imma try this tip thanks bro. You sold me🤝

@ChemicalGuys

4 жыл бұрын

Thanks for watching and happy detailing!

Love your hex logic pads...

Great video. Glad my rabbit hole led to you guys! Some comments say it’s a long time in one spot but thinking about not having to do that two more times with different compounds it’s not too bad. Amazing side by side!

@ChemicalGuys

2 жыл бұрын

Thanks so much for watching!

@alionaandrei12

2 жыл бұрын

@@ChemicalGuys will this work on yellow sponge scratches?

1.1 wash car 1.2 use clay bar 1.3.1 use product 1.3.2 use lube 1.3.3 wipe off product that shouldn't be there because [take shots] because the product cuts like a compound, finishes like a polish

@epakerd

5 жыл бұрын

Scirocco City what about ceramic coatings?

All I have to say is...this is an Awesome step by step video -- nothing complicated, the way I like it. This was just what I was searching for to bring my black cadillac deville back to life. Thanks Guys!

@blairgilpatrick1712

5 жыл бұрын

PaPa51 no it’s actually complicated. He just isn’t doing it right at all

Love it! Thanks !!!

Worked great on that red. Same color as my G35! Summer project for sure.

@andrewsmith4621

5 жыл бұрын

Kevin Vines g35 lol nice Nissan

Just discovered your products. Love them and will be buying chemical guys from now on

@ChemicalGuys

5 жыл бұрын

Awesome! Welcome to the Chemical Guys family, James! Really glad to have you here. Let us know if you ever have any questions on which products to choose or how to use them. Thanks for watching and stay tuned for a new video dropping later today!

Great demo, I'll be picking up your VSS product tomorrow. Thx!

@ChemicalGuys

2 жыл бұрын

Enjoy your detailing products!

Wow that’s amazing. I work at a dealership and I have grown to more cleaner when it comes to my car I will definitely pick this product up

@ChemicalGuys

2 жыл бұрын

Thanks so much for watching!!

This is amazing, I just ordered some VSS along with an orange hex-logic pad to tackle those pesky swirl marks that have been annoying me along with White light & a black hex-logic pad. Can't wait to get cracking with these products 👍🏻😁

@ChemicalGuys

6 жыл бұрын

Hey Tyler, that's awesome! We can't wait to see your before and afters, so make sure to snap some pics and share on IG or FB! Thanks for watching and happy detailing! 👊

Wow. Night and day difference. Thanks for the video!

@ChemicalGuys

5 жыл бұрын

Thanks for the awesome feedback, glad to have you apart of the Chemical Guys family!

That's way cool, I just bought a black Jeep and now I know what to buy to keep it looking new.

hey bro hope you answer this great video like always btw. how much force would you say you were using were you just guiding the machine were you really leaning into it or whats best for the vss since its a one step product.

Oh, ok. Thanks. I'll get all that set from the link site.

i've got some major swirl marks on my car, and being a dark colour it shows big time, do i use vss or v38? both say they do the same thing roughly on product description.

Cant wait to get some of your products. I am looking into getting Jetseal, Blacklight and one of your carnuba waxes.

Looks great! We are always looking for new products to try in our shop , this one looks like it would be a great one to try.

By the time you do the whole car, it'll be time to store it for winter!

wash > claybar > compound > polish > wax

@williamgardiner6473

8 жыл бұрын

How about "sealing" the paint before wax/polish??

@charleschoo9398

8 жыл бұрын

ehmm my place doesnt sell any sealant,but i think wash my car monthy, so i guess its okay

@AntiMashu

8 жыл бұрын

+William Gardiner i dont think you should do anything else to the paint after you have put the sealant on it

@iamsam8446

8 жыл бұрын

Maybe if you garage it all the time, but I doubt it. At least wax every 6 mos depending on where you live.

@charleschoo9398

8 жыл бұрын

Iam Sam to be truth , i wax it monthly,but from wer i live which is everyday around 35C-40C,the wax only last for 1-2 weeks(usually last 1 week),n i use turtle wax ice paste wax ( synthetic )

Thanks for the info

This guy is awesome! Love y’all’s products and great video and details thank you for the helpful tips. Have a Black 2010 Camaro SS I just recently got she’s got bad swirl marks and scratches hoping to get those out

@ChemicalGuys

Жыл бұрын

Thanks so much for tuning in!!

Drinking Game: take a shot every time he says, ,"cuts like a compound and finish like a polish." :D

@TheHoppy87

7 жыл бұрын

even better try doing it when he says smooth as glass in his videos lol

@elsey1976

7 жыл бұрын

C Mill blitzed before the 5 min mark!

@ianthewright

7 жыл бұрын

I read the comment exactly as he said it...

@ealexis76

7 жыл бұрын

C Mill 😍😍😍😍😍😍🤗🤗to and I'll contact YOU to can I yippy want Mr and

@christinaandwena8917

6 жыл бұрын

1-800-273-8255

It looks like it performs well, I liked the part where the clay bar was used before the tape line was applied for the dramatic difference!!!

@ChemicalGuys

3 жыл бұрын

Thanks so much for watching!!

Hello guys and the video is amazing I will try asap the product and hope to be another happy customer......

How would you compare that machine to the Flex 3401??? I sleep with my 3401 so that said, I love it!

This dude loves polishing more than Michael Scott loves paper

@craigchristian1073

5 жыл бұрын

MATTHEW LEY I’m sat watching the office us right now on prime while watching this video lol weird

@BrianPoillon

4 жыл бұрын

...but still only half as much as I love jack’n’off.

@TheDuke085

3 жыл бұрын

Ryan started the fire

@RideOrDiiie

3 жыл бұрын

@@TheDuke085 THE FIRE GUY!

@heymanbatman

2 жыл бұрын

I love the office 😂 yeah this guy look like ryan with beard

I fell asleep when he was polishing lol

@AverageJoeLui

7 жыл бұрын

Lmfao me too

@shayn5255

7 жыл бұрын

me too!

@uss.chubmarine

7 жыл бұрын

same

@Sergioalvarado_96

7 жыл бұрын

same

@mayhemw.6122

7 жыл бұрын

damn I did too. realized he was still going ..and going...and going

dear friend thnx for the video can i use the same product for swirl marks on my windshield? or u recommend something else thnx in advance

I used to V36 polish on my 2014 Acadia Denali, it made the surface smooth as glass then I top it off with Jet Seal paint sealant and 50/50 wax it lasted a year time wax it again this time Pete's 53 expecting the same results. Makes carbon black metallic paint blinding. Good wax.

Great vid! I've been hesitant to try the all in 1 process vs. the traditional 3 step. You mentioned that with this that you achieve 95% paint correction. Which of your products would you recommend to use after this to get that last 5%?

@ChemicalGuys

6 жыл бұрын

Hi Bret, that's a great question. The complete V Line series can be used to achieve an amazing mirror-like shine. VSS has the approximate cutting power of a compound like V34, then finishes like V36. Depending on the severity of damage and the softness of your particular paint finish, try using VSS, then refine extra gloss and shine with V38. Just remember one truth as you polish: You will not remove 100% of defects. It’s just not possible. Embrace the limitations of paint technology and polishing methods: accept that you can get paintwork to look as good as it possibly can without simply starting over with a new paint job. Thanks for watching, Bret, and stay tuned for a new video launching later today! www.chemicalguys.com/V_Line_Polish_Compound_Sample_Kit_4_oz_p/gap_vkit_04.htm

Great video. Thank you for taking the time to show us. A couple questions. How much pressure do I put on the rotary tool as I'm buffing? And do apply anything to the paint afterwards? Sealant? Wax? Ceramic coating? Thank you.

@L-Noble.YT_Hi.Res-Soundminds

4 жыл бұрын

You want to apply 15 pounds of pressure on the tool. You can practice by putting tool on a scale and applying the correct down pressure.

Can I use v38 to do this same scratch and swirl removal job?

I enjoy your how to videos very much. Could using a cutting compound first eliminate using a clay bar for removing paint contamination?

@ChemicalGuys

3 жыл бұрын

Hey! We recommend claying before using a compound. Thanks for watching and happy detailing!

I always sleep with a fan on and the sound while polishing was putting me to sleep! And im at work right now.

@joeroy2952

3 жыл бұрын

😂😂😂

For all you armatures out there, myself included, this is not the end of the process. After the one-step is applied you must seal the applied wax. Once the wax is sealed, you must maintain the finish, by using a quick detailer at lest three times a month.

I use Meguires Scratch and Swirl, it's a 3 on the "cut scale" with an orange foam pad or sometimes a wool. Any tips? Should I be doing something different? It looks like you have some nice products

Should you tape the window moldings and stuff before doing anything?

Thats better a before and after video ye should do these vids more often, did ye use any sealant or wax after ye finished the car or was there a need to?

@tristinbailey7565

8 жыл бұрын

You should ways use a sealant after doing this. It keeps it looking good

It’s been 4 years and he is still polishing

I have deep and lots of scratches should i use this method or the multiple step method from your other videos for best results? Like is this method better to save time but not as effective as the older method?

Nice. you sure went over that comparison line a few extra times.

Does this technique permanently remove the swirl marks or just hiding them? I am new to using a polisher (never used it yet) and want a nice job on my black car.

@ChemicalGuys

3 жыл бұрын

Hi! Scratches and swirls are caused by improper washing, drying or touching of the paint. Using VSS will refine the clear coat and remove imperfections, as long as proper care is taken when handling the vehicle it will remain scratch-free. - CG Nick

And holly wow you spent like forever polishing g that 1 little spot.

What RPM settings do you use? You said start with 1 and 7 ( I think) but I was really hoping you would have said rpms instead. Not all of us use that exact tool, I have a different brand. Thanks.

Great video! What is the music during the comparison scene. Nice.

Jaboody Dubs needs to do a dub of chemical guys videos.

1 quest. after he was done would it be advisable to put somec2v3/liquid crystal on 4 an added finish = protection?

@ChemicalGuys

5 жыл бұрын

Hi Scott, good question. After removing the scratches and swirls from your car using VSS, we strongly recommend then protecting the finish with a protective coating, sealant, and/or wax. While we can't speak for other company's products, we can assure you that the durability and shine that you will get out of Carbon Flex C9 or Jet Seal will impress you and keep your car looking its best for the longest. Thanks for watching, Scott, and thanks for being a part of the Chemical Guys family! www.chemicalguys.com/JetSeal_16_oz_p/wac_118_16.htm www.chemicalguys.com/Carbon_Flex_C9_Protective_Coating_Kit_4_Items_p/wac227.htm

Great Polishing Action! I Plan to do my car as well Black on Black Corvette,

@ChemicalGuys

2 жыл бұрын

Enjoy your detailing products!

hi, thanks for the video, I have gs450h lexus black color, I have over spray, swirl marks and etc all over the car, I was wondering if I need to use any specific type of clay bar to remove the contaminants?

Is it right to do : Wash, Clay, VSS, GlossworkzGlaze, JetSeal. ? thanks in advance

*Does all the work to prevent contaminates during the polishing process.... Goes over tape with pad*

@joeroy2952

3 жыл бұрын

😂😂😂😂

would you recommend using VSS more then 1 in a year? Or is that bad for the paint? also would you follow it up with a sealant?

I purchased this product a month ago and can't wait to use it!! All I have tho is a regular polisher and I am afraid to use it. I don't want more swirl marks. Will VSS remove swirl marks off of the plastic headlight covers?

@alojzijejozinovic9524

4 жыл бұрын

Keith Scott what were the results?

We missed this guy, the reviews were so much higher.

Great video! I like the way you explain shit!

Great video, thanks.

@ChemicalGuys

4 жыл бұрын

Glad you liked it!

Wow! Incredible!

@ChemicalGuys

3 жыл бұрын

Glad you enjoyed the video!

2:31 "ultimate lubrication"

@stefanopalermo22

7 жыл бұрын

lmao

@FANATICLANT3RN

7 жыл бұрын

ZphykTESHD I'm over here weeeeeeak

@factorx90

7 жыл бұрын

the second i heard him say that i had to look through the comments to see if i was the only one who thought that was funny. so intense. so lubed

@Mistickman47

6 жыл бұрын

ZphykTESHD but only in there detail garage

@mopar21

5 жыл бұрын

Gently scrub the surface

QUICK TIP: To test the true smoothness of your newly detailed vehicle, take the plastic sylafane from a cigarrete pack and put two fingers inside to work as a little finger glove, swipe the surface and you can feel all the roughness, if any, and see how well the job was done. A detail job with use of a clay bar should help remove most of the dirt you can feel using the sylafane.

@l.h.7626

6 жыл бұрын

OFFICIAL Laketh Empire KZread did you work at Delta Sonic?

@831678Anthony

6 жыл бұрын

OFFICIAL Laketh Empire KZread you mean cellophane?

I just bought the VSS product to remove swirls and scratches. Then I wondered, how aggressive is this product? I have a MB SL550 that's black. I don't have any swirl marks but I do have all of those fine scratches that probably come from washing the car over time. Those are what I want to remove. My concern is that this product might be as aggressive as say, rubbing compound. That's not what I want to use. So, I've ordered the product already. My thinking is that I can try it out on my truck first and see, but it would be nice to hear back from you. Also, I did watch your entire video. You seemed to spend a lot of time buffing that area you wanted to show us the contrast to the other side of the tape. I don't mind spending the time doing that at all. I was just curious if that's about the amount of time I should spend to.

how much pressure are you using? it seems like quite a bit, I always do this by hand and want to start doing it with a machine because my new to me taurus SHO is so huge. Also do you guys do military discount for retired military?

How long does paint stay nice and clean until you begin to get swirl marks again? Any tips on avoiding them ?

@ChemicalGuys

4 жыл бұрын

Hi Brian! Swirls and scratches are only caused when something touches the paint, if the vehicle is never touched it won't get scratched. Avoid swirls by using linear motions when touching the vehicle. Prevent scratches by always lubricating the surface before touching it. - CG Nick

@briandominguez7494

4 жыл бұрын

Interesting. Thanks ! Keep up the good work

I have a 2017 black wrx and it already has some scratches and swirl marks Planning on doing this but how often is it recommended to do so ?

@mopar21

5 жыл бұрын

Once you correct the paint, shouldn't have to repeat often if you follow proper steps to wash dry and maintain.

@AntPine

5 жыл бұрын

3-6 months

This product is awesome. I wet sanded some small parts and used VSS. Two applications and it has a mirror finish. Topped it with JetSeal and 2 coats of Butter Wet Wax. Looks amazing at night.

So v36 considered soft polish not tough when using it with orange foam pad correct? I'd like to use it to my hummer H3 genuine paint but it polished one time before so is it safe and compatible, thanks in advance for your support.

How To Remove Swirl Marks And Water Spots In One Step: 1a: Clay bar 1b: Polish with VSS

@awakenedautopsy5856

7 жыл бұрын

You can trouble me for a warm glass of shut the fuck up

@sandmastermaster

6 жыл бұрын

1a. Buy the car 1b. Go to sexy car wash 1c. Notice swirl marks 1d. Wash it 1e. Clay bar 1f. Polish with VSS 1g. Wax Why do people think that clay bar is part of the the one step?

@epakerd

5 жыл бұрын

What about ceramic coatings

HMMM! CANT FIND A BLACK CAR? TO MODEL THIS DEMO! MAN O MAN!

@ChemicalGuys

7 жыл бұрын

Why are you yelling? Here, watch this: kzread.info/dash/bejne/eWiOzK2qmNa5lLQ.html

@jojopimentel9402

7 жыл бұрын

+Chemical Guys IM NOT YELLINGG! IM JUST ASKING WHY YOU GUYSSS CANTT FINDD A BLACK CAR! ARE ALL BLACK CARS ARE ON STRIKE?

@followthetrawler

7 жыл бұрын

Its convention on the Internet that using all capital letters is deemed to be 'shouting' or 'yelling'

@jordan88884

7 жыл бұрын

lmao haha

@robinjamesclemente2333

7 жыл бұрын

+Jojo Pimentel haha true dude im a professianal detailer though but honestly black is my biggest enemy?

Works it also with the CG Microfaser Pads? What is the Difference about the "normal" PLS Explain

wow awesome product!

@ChemicalGuys

5 жыл бұрын

Happy detailing!!

for ultimate lubrication

reminds me of ben stiller from Happy Gilmore

@JonMichaelDeBona

7 жыл бұрын

You can trouble me for a warm glass of shut-the-hell-up.

@FirearmTutorials

7 жыл бұрын

You're in my world now Grandma!

@isaacsummerfield

7 жыл бұрын

My fingers hurt

@Reece634

7 жыл бұрын

lol

@DavidDiSante

7 жыл бұрын

Well now your back is gonna hurt because you just pulled undercarriage detailing duty. Anyone else? I didn't think so...

Great video came out great super easy

I'm sold!! Ordered some from Amazon just now with the orange pad and clay bar, can't wait to bring back the paint this weekend. QUESTION: Would I be ok if I started by hand (to simulate speed one) then attached the pad to a Black&Decker one speed random orbital polisher? I know it would take longer than in the video but I won't hurt anything by using this will I?

@antweezy171

2 жыл бұрын

How did it end up working out for you friend?

how do you know when you got enough pressure on the machine?

@C_Grosso

4 жыл бұрын

Get a scale and press down on it with the weight of machine and your pressure you want to have about 15lb keep doing it and build muscle memory

@alexyakobchuk4785

3 жыл бұрын

@Tyler Durden 🤪🏴‍☠️

How long is that Torq gonna last?

@apexdetail85

7 жыл бұрын

Those digital controls scare the $hit out of me!!!

@ChemicalGuys

7 жыл бұрын

Torq units are built to last. I personally own a Torq10fx for 3 years and use it daily with amazing results and durability. If you are worried about the digital display the TORQX is not digital. But trust me you have nothing to worry about. they make great tools.

@harryl7946

6 жыл бұрын

For $200 better last quite a while! I’ve spend less than half and expected more than double. My money doesn’t come as easy as some so when I spend it I better get BANG galore!

@jx906

6 жыл бұрын

$159 at Amazon (not the digital one, just has a wheel with numbers); 173 reviews; 4/5 starz; this is the nine-item kit and currently has a $30 coupon. Got mine coming!

@rancewhite9312

6 жыл бұрын

J X I’ve had mine for about 3 years. I had to rewire the electric cable inside the housing today from the electric cable clamp being tight and I guess from so much use, but now working like brand new. Im assuming it’s from when I am using it I will throw the cable over my shoulder to keep it from the paint and it puts a bind in the wire. But I will buy another one when the time comes. They’re worth the money.

Just might pick this up. My car is just as bad of not worse with swirl marks. It was pretty convenient that it was the same car in you video to.