Give Your Paint Gloss, Depth and Slickness! - TORQ 22D Polisher: bit.ly/3MH5nS4 - Wet Mirror Finish: bit.ly/3ONhCz2 - JetSeal: bit.ly/3WF8b6R - Synthetic Quick Detail: bit.ly/3WGybyy

If I knew what I was getting into before getting my black car, i wouldn’t have gotten a black car 😭

@ChemicalGuys

3 жыл бұрын

Hey! The finished result is well worth the process. Happy detailing!

@noelsaw

3 жыл бұрын

It’s def a lot of work but with it in the end (4 hrs later) 😂

@colorcodetrader4032

3 жыл бұрын

Ceramic coat or clear wrap that black beauty.

@unixdoes

3 жыл бұрын

no color looks better. perfection takes work.

@LightofDeneb

2 жыл бұрын

@vertz, same here. It is so much work. First and last black car for me.

Used all three on my brand new black 2022 Ram 3500 dually. Wow the paint looked wet, crazy shine, and made huge difference in attracting dust. Looked even better the next day after it cured and no dust on it.

@ChemicalGuys

2 жыл бұрын

Happy detailing!!

@aimized1460

2 жыл бұрын

Will this method protect my car against water spots and dirt ? I washed my car yesterday, clay barred it and polished some panels only for it to rain and all my work is ruined…

@jmc4975

9 ай бұрын

​@aimized1460 You always need to use a paint sealant and/or wax after polishing, and if you don't protect your work, then you're leaving it open to even more contamination.

Great video! Thank you for the great tips in order to keep my black ride looking great!

@ChemicalGuys

Жыл бұрын

Happy detailing!!

My Bens most needed video !!! THANKS AGAIN GUYS !!!

@ChemicalGuys

2 жыл бұрын

Hope you enjoyed it!

Way much more better 🤔. Great video. Not so much on the quadruple negatives. 😂. But seriously. Helpful.

This is a all day thing! Well guess I’ll be spending my whole Sunday in the garage

@ChemicalGuys

3 жыл бұрын

Enjoy your detailing products!

@brianramirez2519

3 жыл бұрын

Like a man should

Great video we need Nooners with Nick to make a come back!!!

@ChemicalGuys

3 жыл бұрын

Hey! Thanks for watching and I will pass this onto the correct department.

This video was awesome! Thanks so much Joey!

@ChemicalGuys

3 жыл бұрын

Glad you enjoyed it!

Thank you very much! Helped out a lot!

@ChemicalGuys

3 жыл бұрын

Thanks for watching and happy detailing!

Just did a ceramic coating video on my mustang using all the chemical guys products. Turned out great.

@demigodq6083

3 жыл бұрын

So at what point do you add a ceramic coat

@Piedmont57

3 жыл бұрын

DemigodQ60 ! Right after correction/polish

@ChemicalGuys

3 жыл бұрын

Hey! Thanks for the amazing feedback!

@CanadianCruisin

3 жыл бұрын

@@ChemicalGuys best products out right now.

Thanks for this video! I bought everything in this video and plan to use it on my new to me 2017 Black Ford Expedition XL Limited. its gonna take some time but it will be worth it. then to cancel my monthly automatic car wash subscription and try to break that habit. No more squirrel marks for me. Will be getting all the fun things for car washing soon as well... power washer, air cannon etc. Been watching your videos for months now. Great content!

@ChemicalGuys

2 жыл бұрын

😃 Enjoy your detailing products!!

@rodm2345

2 жыл бұрын

Need an update how did it go?

Just got a 2012 MX-5 that is black. She will look great. Thanks

@ChemicalGuys

Жыл бұрын

Enjoy your detailing products!!

What speed was jet seal applied? Dial the polisher to 1-2? A much needed video. Love my black BMW but it’s a lot of work.

@ChemicalGuys

3 жыл бұрын

Hey! When applying a glaze, sealant, or wax, we recommend applying it on speed setting 1. Thanks for watching and happy detailing!

@endyvaldovinos8134

3 жыл бұрын

@@ChemicalGuys do you apply 5 lbs of pressure as well?

@chrisbatson3402

2 жыл бұрын

Black cars are always work. Because every spec of dirt shows on the black color. I have a black bmw and silver mini

@Monster33336

2 жыл бұрын

These guys are snake oil salesmen. Their stuff dont really work

@SergioHernandez-zv5wc

2 жыл бұрын

@@Monster33336 false there products do work well. I’ve been using them for years before they became Walmart famous or even KZread famous. Used to go to their shop in LA all the time

Awesome vid, I have a Black SS Camaro and this was very informative thanks! Is regular clay bar best? I have the synthetic made one...

@ChemicalGuys

3 жыл бұрын

Hey! Yes, that clay will be perfect. Thanks for watching and thanks for being part of the Chemical Guys family!

You Guys' make me won't to open up a detail shop !!

@ChemicalGuys

3 жыл бұрын

Thanks so much for being part of the Chemical Guys family!!

Awesome from Florida!

@ChemicalGuys

Жыл бұрын

Thanks so much for tuning in!

I use a bunch of your products d/ which are awesome. Do you have a ceramic coating available? What's your thoughts on ceramic sprays?

@ChemicalGuys

3 жыл бұрын

Hey! We recommend HydroCharge, it is the easy-to-use SiO2 ceramic spray coating that delivers a brilliant high-gloss candy shine, extreme hydrophobic properties, and the durable protection of a ceramic coating with the ease of use and speed application of a spray. www.chemicalguys.com/hydrocharge-high-gloss-hydrophobic-sio2-ceramic-spray-coating/WAC23016.html

Would you recommend applying the Butter Wet Wax after the Jet Seal? Or just use the Quick Detailer after the Jet Seal?

@ChemicalGuys

3 жыл бұрын

Hey! We recommend applying Butter Wet Wax after Jetseal. Thanks for watching and happy detailing!

Your products are incredible

@ChemicalGuys

2 жыл бұрын

Thanks so much for being part of the Chemical Guys family!

After this detail. What products should you use you to regularly wash and maintain a black car?

@ChemicalGuys

3 жыл бұрын

Hi Alex! After the vehicle is coated, you can use your favorite car wash soap to enhance and maintain a brilliant shine.

It was a great video. One question: can I apply ceramic coating at the end?

@ChemicalGuys

3 жыл бұрын

Hi there! After polishing the vehicle is when you would want to apply your favorite ceramic coating. It can then be layered with glaze, sealant, and/or wax if so desired. - CG Nick

@1990Neman

3 жыл бұрын

@@ChemicalGuys That's great. Thank you so much. You have wonderful contents. I will do all these steps on my car.

@nicky85926

2 жыл бұрын

@@ChemicalGuys so do you use a pad to add the ceramic coating?

Great video! How often do you add the product to the polishing pad? What size pad should I use for my challenger 1320 Scat?

@ChemicalGuys

2 жыл бұрын

Hi Bob! Reapply polish to your pad after every two foot by two foot section. Glaze, sealant, and wax spread very fine with a machine so reapply as necessary.

Say you’d want to apply HydroSlick ceramic coating on this black car. Would you apply it before or after Jet Seal?

@ChemicalGuys

3 жыл бұрын

Hey! We recommend applying HydroSlick before Jetseal. Thanks for watching and happy detailing!

Pretty slick work 👌

@ChemicalGuys

2 жыл бұрын

Happy detailing!!

How long would you wait between applying the gloss and the sealant?

@ChemicalGuys

3 жыл бұрын

Hey! We recommend allowing 15-20 minutes to pass in between application. Thanks for watching!

Fantastic work. Could ask a question Once all these steps are completed If I want to wash my car again after say a week do I need to repeat each process step by step, or what steps should I apply for tops up? Also just wondered can I repeat all the steps you've shown, how often? or can it be completed as you've shown weekly from stop one, straight through Thank you and most appreciated

@ChemicalGuys

2 жыл бұрын

Hey! Thanks so much for your message. It is not necessary to repeat these steps before your weekly wash, simply use your favorite car wash soap to maintain a clean finish. Clay bar the vehicle at least twice a year or as needed depending on the look and feel of your paintwork.

Before anything great videos! Question. Should i do this after washing my car ? Or before?

@ChemicalGuys

3 жыл бұрын

Hi Carlos! We're so glad you're enjoying the videos. It would be best to wash the vehicle first then clay and continue with the detailing flowchart. - CG Nick

@mariosabala3811

3 жыл бұрын

Will i apply clay luber for car glass/windows before applying jetseal??

If I want to apply a ceramic coating, glaze, sealant/wax, how long do I wait in between each application before applying the next product? Don’t you have to wait at least a few hours for the ceramic coating to cure before applying another layer of protection? And does that apply for each product? Or can I apply the sealant or wax immediately after the glaze?

@ChemicalGuys

2 жыл бұрын

Hey Kris! After applying ceramic, allow at least 3 hours before applying glaze, sealant, and/or wax which can then be applied almost immediately after each other.

@mopar_shawn939

2 жыл бұрын

@@ChemicalGuys Ceramic coat before wax, glaze or sealant? I was thinking ceramic coating was like a last finishing product. I should write this stuff down.

Hi there. Amazing explanation. Can the Synthetic Quick detailer be used when we dry the car after washing it?? Many thanks

@ChemicalGuys

2 жыл бұрын

Yes, absolutely!!

At what point would you apply the ceramic coating? And how long does the protection last on the work you just completed in this vid? Thank you!!

@ChemicalGuys

2 жыл бұрын

Hi there! Once the the vehicle has been washed, clayed, and polished(if necessary) it can be ceramic coated.

@kuinagel

2 жыл бұрын

Ok thx. You would happen to have a “new black vehicle ceramic start to finish” video do you? This one was a good one. Just didnt know if the glaze is needed or the final two steps.

Just bought a black Tacoma and Challenger so thanks for the video.

@ChemicalGuys

8 ай бұрын

Thanks so much for tuning in!

Can you apply hydroslick ceramic liquid wax then top it with butter wet wax for the warm glow that carnuaba gives

@meanf1502

3 жыл бұрын

Jet seal after a good clay bar if needed if needed rub it out if not jet seal an then hydroslik it

@ChemicalGuys

3 жыл бұрын

Hey! We recommend applying HydroSlick after polishing. Thanks for watching and happy detailing!

Watching from the Philippines 🖤🖤. I hope I can use some of your products 🙁🙁🙁

@ChemicalGuys

3 жыл бұрын

Greetings from Southern California!!

@doeyjiaz4798

3 жыл бұрын

If you have any friends or family in North America, they can ship it from here if you cant buy it at home

@fdude555

3 жыл бұрын

Lots of other products here in the PH as good or better than chemical guys. Dont buy into the hype man.

@jsmith7870

3 жыл бұрын

buy them from amazon

Just bought a 22 GR 86 in Raven Black (my first black car) I wash it almost weekly with your guys products but I was wondering if you guys have a specific kit I can buy for black?

@ChemicalGuys

2 жыл бұрын

Hey! That's awesome, check out the Black Car Car Kit to clean, enhance, protect and maintain a deep gloss. www.chemicalguys.com/black-car-care-kit/HOL203.html?gtmListValue=Internal%20Search

Hi i have a black with metallic flakes very nice color i want to know if i apply this clay bar process can i apply then black light glaze to enhance the metal flakes and then carnauba wet wax to protect the finish. Thanks

@ChemicalGuys

2 жыл бұрын

Absolutely, that is correct!

Luv from india hope to get ur products soon !

@ChemicalGuys

3 жыл бұрын

Thanks for watching!!

Is the glaze better for a vehicle that will be parked outside?

So the order is is wax, glaze, and sealant? A detail garage store told me it was glaze, sealant, then wax.

@ChemicalGuys

3 жыл бұрын

Hey there! Following the Chemical Guys detailing flowchart, we recommend to apply glaze, sealant, and wax in that order. Check out this video. - CG Nick kzread.info/dash/bejne/ZIuTmc6fpbu_fNY.html

@lawdawg78

2 жыл бұрын

They were correct

Would you recommend compound first on black paint that looks horrible? Swirls scratches etc.

@ChemicalGuys

2 жыл бұрын

Hi Josh! After washing and clay barring the vehicle, inspect the paintwork to determine which combination of pad and chemical is necessary. For heavy imperfections, I recommend using an Orange Hex-Logic Pad and V34 Hybrid Compound.

So after all that can you apply ceramic coating on top off everything you just did ?

@ChemicalGuys

3 жыл бұрын

Hi Victor! When using a ceramic coating it is best applied to bare paint after polishing. It can then be layered with your favorite glaze, sealant and/or wax. - CG Nick

Do you have to polisher after a clay bar or is that an optional step?

@ChemicalGuys

3 жыл бұрын

Hey! If your paint is scratched and swirled, we recommend polishing it. If your paint is not scratched and swirls, you may skip the polishing step. Thanks for watching and happy detailing!

I just got my car repainted. Should I use jet seal first then hydroslick wax or what steps should I take?

@ChemicalGuys

3 жыл бұрын

Hey! We recommend allowing 4-6 weeks to pass before applying anything. Once the paint is fully cured, we recommend applying HydroSlick first, then follow it up with Jetseal. Thanks for watching and happy detailing!

Should I add a six inch back plate to my torqX?

@ChemicalGuys

3 жыл бұрын

Hi there! Adding a 6 inch backing plate to your TORQX will help to cover more surface area and reduce polishing time.

Which pad do we use for applying glaze, sealant or wax? Can we use the same pad for the 2 or the 3 of them?

@ChemicalGuys

3 жыл бұрын

Hey! We recommend applying glazes with a blue pad and use a black pad for sealants and waxes. Thanks for watching and happy detailing!

My car is a super dark blue. Will this routine still suit?

I have a lithium grey F150, which product do you recommend for long lasting shine?

@ChemicalGuys

3 жыл бұрын

Hey! We recommend Black Light, it is pure eye-candy for black and dark-colored cars. The amazing hybrid glaze adds tons of deep wet shine, fills in minor imperfections, and lays down a layer of durable sealant in one step! www.chemicalguys.com/black-light-hybrid-glaze-and-sealant/black-light-glaze.html

Great video

@ChemicalGuys

3 жыл бұрын

Thanks for the amazing feedback!

So, at what point would I apply the "Black Light" hybrid radiant finish in this process? Does it replace anything in the video like the Wet Mirror finish or is the Black Light applied in addition to everything else? If Black Light is applied instead of Wet Mirror, does the Jet Seal still go over the Black Light? Please help.

@ChemicalGuys

2 жыл бұрын

Hi there! Black Light and Wet Mirror Finish are glazes which would be applied before sealant and/or wax.

@LightofDeneb

2 жыл бұрын

@@ChemicalGuys I appreciate the response, but it didn’t answer the question I posed.

@CertifiedBryansito

Жыл бұрын

@@LightofDeneb black light replaces wet mirror finish

Do you wash and dry the car before applying the clay bar?

@ChemicalGuys

2 жыл бұрын

Hey! Yes, it is important to wash the vehicle before using a clay bar.

So what all detail treatment would you recommend after ceramic coating a black vehicle?

@ChemicalGuys

2 жыл бұрын

Hey! Check out HydroSuds and HydroSpeed to maintain and boost ceramic coatings.

Nice fj40 back there!

@ChemicalGuys

2 жыл бұрын

Thanks so much for watching. Check out this link! kzread.info/dash/bejne/aamlk7Cxn5rAdaQ.html

How often would you suggest to do this process?

@ChemicalGuys

3 жыл бұрын

Hey! We recommend repeating this process every 6 months. Thanks for watching and happy detailing!

This might be a dumb question, but I'll ask anyways. What do you do when you get to the logos and badging on the vehicle you are detailing? On my truck I have in large letters RAM on the tailgate. Do I just polish over it? Thanks for any feed back

@ChemicalGuys

Жыл бұрын

Hi Gregory! Try masking off trim and badges before polishing.

after all these steps, can i apply ceramic coating a day after or it has to be done right away?

@ChemicalGuys

2 жыл бұрын

Hi Darla! For best results we recommend to apply coatings as soon as possible however it is perfectly fine to do so the next day as long as the vehicle is kept dry and clean.

Do you guys recommend anything for harley wrinkle black engine paint. Want to keep it clean and protect it from fading? Will this product work?

@ChemicalGuys

2 жыл бұрын

Hi there! Safely clean and protect the surface using Meticulous Matte Spray Sealant. www.chemicalguys.com/meticulous-matte-detailer/meticulous-matte-detailer.html?gtmListValue=Internal%20Search

Is your Blacklight product considered a glaze, polish, or sealant?

@ChemicalGuys

3 жыл бұрын

Hey! Black Light is a glaze. Thanks for watching and happy detailing!

When your polishing with v34 do you need to polish with v38 after too

@ChemicalGuys

2 жыл бұрын

Hi there! Yes, it is necessary to refine V34 with V36 and/or V38.

You have to enjoy it I do mine twice a year and u need the chemicals and polisher

Should I apply these products after or before Hydroslick?

@ChemicalGuys

2 жыл бұрын

Hey! Apply HydroSlick to a bare surface and then it can be layered with glaze, sealant, and/or wax.

can I use the V38 on the high gloss finish on the B-pillar?

@ChemicalGuys

3 жыл бұрын

Hey Pierre! Absolutely, use V38 to refine light imperfections and enhance gloss.

How many bars would I need for a whole car/small truck?

@ChemicalGuys

3 жыл бұрын

Hi there! One clay bar can decontaminate several average size vehicles.

Awesome tutorial! would be nice if you guys could apply this to a all-black Harley-Davidson… dont mind volunteering mine lol

@ChemicalGuys

2 жыл бұрын

That's a great idea!

Will the jet seal & the glaze prevent swirls? Thanks!

@ChemicalGuys

2 жыл бұрын

Hi Brandon! Glaze and sealant will add depth, gloss and protection against harsh UV rays however a ceramic is what adds abrasion protection against scuffs and scratches.

How long does that protection last or how often should I apply those glazes and coats

@ChemicalGuys

Жыл бұрын

Hi Raul! JetSeal lasts up to 12 months and glaze will only bond for a few months however both can be applied as often as desired.

Great video, I have a black Camry and polished it with v38 last April, it’s a daily driver so I can see light scratches, would like to know if I can use v 38 every 4 months?

@ChemicalGuys

3 жыл бұрын

Hey! We recommend V36 Optical Grade Cutting Polish and you can do it every 6 months. V36 Optical Grade Cutting Polish is the great all-around cutting-polish that eliminates light to moderate paint defects and imperfections from all paint types, then finishes like a fine polish. www.chemicalguys.com/v36-optical-grade-cutting-polish/v36-cutting-polish.html

What's the best wax to wax the plastic bumper on a black car

@ChemicalGuys

2 жыл бұрын

Hey! Check out Butter Wet Wax to add gloss and protection to any surface that is shiny or clear.

So they aren’t using any type of a pad lubricant. At this time? I noticed in several videos done by Nick that he all most all ways uses a pad lubricant.

I was waiting for curves polishing with orbital at that point but you skipped clip 😅; however great thanks for sharing your knowledge 🙏.

@ChemicalGuys

10 ай бұрын

Thanks so much for your feedback

Can glaze be applied after any jet seal or wax as my car was polished using V38 and jet sealed

@ChemicalGuys

2 жыл бұрын

Hi there! Glaze can be applied after sealant and wax however for best results we recommend applying glaze to a bare surface before sealant and/or wax.

Won't jet seal cover the anti static of wet mirror finish?

@ChemicalGuys

3 жыл бұрын

Hey! No, Jetseal will enhance shine and protection. Thanks for watching and happy detailing!

Is that a orbital or rotary polisher?

@ChemicalGuys

3 жыл бұрын

Hey! The TORQ 22D is a random orbital polisher with a 21mm throw to cover large flat panels very quickly. - CG Nick

What kind of polish machine is that !? Is there a certain way to use the polisher , I want to do this process to my black car

@ChemicalGuys

10 ай бұрын

Hey! Check out the TORQ 22D!! www.chemicalguys.com/torq22d-polisher/torq22d-polisher.html

Can I wash with your waterless wash and wax prior to the claybar?

@ChemicalGuys

Жыл бұрын

Absolutely, it is perfectly fine to use waterless wash to prep the surface for a clay bar treatment.

I have a dark gray metallic color what’s best for metallic colors ?

@ChemicalGuys

Жыл бұрын

Hey! Check out this kit to maintain a deep gloss. www.chemicalguys.com/the-complete-black-car-care-detailing-kit/VIR862.html?gtmListValue=Internal%20Search

Can you do the final polish by hand?

@ChemicalGuys

Жыл бұрын

Absolutely!

What pad would i use for v36

@ChemicalGuys

3 жыл бұрын

Hey! We recommend the White Light Polishing Pad, it finishes to restore reflection, clarity, and depth after cutting away heavy defects with a cutting pad, comes in 4”, 5.5”, 6.5” and 7.5" sizes, and vented and unvented form. www.chemicalguys.com/white-hex-logic-light-medium-polishing-pad/hexlogic-white.html

Wish I knew what I did wrong on my car, After polishing using C4 my Black hood now has a "buffing pattern" down the entire hood, almost looks like streaks but the size of a buffing pad.

@ChemicalGuys

2 жыл бұрын

Hey Patrick! Follow up with P4 and a White Hex-Logic Pad to remove holograms and buffer trails.

How often would you want to clay bar a vehicle?

@ChemicalGuys

2 жыл бұрын

Hey! Use the clay bar as necessary, at least twice a year is recommended to maintain a smooth finish.

How many pads should you use when polishing your car

@ChemicalGuys

2 жыл бұрын

Hey Jonathan! It is recommend to have at least two of the same color pad for a polishing job.

Can you use a wax instead of jet seal.

@ChemicalGuys

3 жыл бұрын

Hey! Yes, you may wax instead of Jetseal. Thanks for watching and happy detailing!

Can you tell me please which product is the anti -static product ?

@ChemicalGuys

Жыл бұрын

Hi there! Repel dust by applying HydroSlick.

What soap should use to wash it? Does it need to be soap with no wax in it?

@ChemicalGuys

Жыл бұрын

Hey! Use any of your favorite Chemical Guys car wash soaps to lay down thick suds such as Sticky Snowball Snow Foam to maintain a beautiful gloss.

@raiderz4life421

Жыл бұрын

If I want to clay bar, what soap do I use prior to clay baring it

What do you guys use for the black rims to clean and maintain them?.

@ChemicalGuys

3 жыл бұрын

Hey! We recommend Diablo Wheel Gel, it is a pH-balanced wheel and rim cleaner that uses gentle oxygen infused foam to safely clean any shiny wheel finish. This non-caustic formula is perfect for weekly maintenance washes! www.chemicalguys.com/diablo-gel-oxygen-infused-foam-wheel-and-rim-cleaner/diablo-wheel-gel.html

@daniellaherrera5333

3 жыл бұрын

@@ChemicalGuys do you guys have a video for this ?

Can I use hydro slick with jet seal ?

@ChemicalGuys

2 жыл бұрын

Absolutely! Apply HydroSlick before adding JetSeal.

Which glaze is better for black paint, wet mirror finish or blacklight?

@NSZ-sb6kt

3 жыл бұрын

Blacklight

@ChemicalGuys

3 жыл бұрын

Hey! If you would like to get shine and protection in one step we recommend using Black Light. If your car sits outside, we recommend Wet Mirror Finish since it has anti-static agents. Thanks for watching and happy detailing!

@thahomiegio

3 жыл бұрын

@@ChemicalGuys can i apply both?

I wanna do this so bad but I live in a apartment and have no access to a power outlet, other than getting a wireless polisher machine idk what else to do

@ChemicalGuys

Жыл бұрын

Happy detailing!

How cold is too cold for applying compound/polish indoor ?

@ChemicalGuys

Жыл бұрын

Hey! If the temperature is freezing it is too cold.

What kind of scares me about using the V line is you said on another video that some of the clear coat is removed in the process.

@ChemicalGuys

2 жыл бұрын

Hi Daniel! Yes, polishing will remove a very fine amount of clear coat to refine the surface and thus remove scratches and swirls.

why do you buff off the polish with a micro fibre towel and not the polisher

@ChemicalGuys

Жыл бұрын

Hi there! It is safer and more effective to use a clean microfiber towel to remove spent product.

Thank you my vw bug is black and its scary to wax

@ChemicalGuys

Жыл бұрын

Happy detailing!

Does this process work for every color?

@ChemicalGuys

2 жыл бұрын

Hi there! Yes, this exact process can be used for any gloss finish paintwork.

Do I have to wash the car after the clay??

@ChemicalGuys

3 жыл бұрын

Hey! It isn't necessary to wash the vehicle again, simple wipe the surface dry.

Wonder if this applies to black cherry?

@ChemicalGuys

Жыл бұрын

Absolutely!

will the clay bar remove water spots on black pants

@ChemicalGuys

Жыл бұрын

Hey! A clay bar can remove recent water spots. Check out Heavy Duty Water Spot Remover for tough stains.

Any tips for handling tree sap?

@ChemicalGuys

2 жыл бұрын

Hey! Check out the natural cleaning oils of Butter Wet Wax to gently scrub away stubborn tree sap. www.chemicalguys.com/butter-wet-wax-warm-and-deep-carnauba-shine/butter-wet-wax.html?gtmListValue=Internal%20Search

How about dong a video on how to clean and reuse the pads????

@ChemicalGuys

8 ай бұрын

Hey! Check out this video. kzread.info/dash/bejne/p2Vs2deIpJTHfdI.htmlsi=mDs-ceLwwSx93Hdb

Can i still apply the butter wet banana wax?

@ChemicalGuys

2 жыл бұрын

Absolutely!!

I NEED TO FIND SOMETHING TO GET LITE SCRATCHES OFF MY GLOSS BLACK FACTORY WHEELS. I HAVE TRIED ALMOST EVERYTHING AND NOTHING SEEMS TO WORK, ANY HELP WOULD BE APPRECIATED.

@ChemicalGuys

Жыл бұрын

Hi there! Try using V36 Cutting Polish to remove light swirls and scratches.

@jeffneis553

Жыл бұрын

@@ChemicalGuys Is V32 the strongest? I tried all sort of compounds even RUBBING COMPOUND, no luck. They look like spider webbing not deep but they dont want to come off.

What polisher is that ?

@ChemicalGuys

2 жыл бұрын

Hi Desiree! Check out the TORQ 22D. www.chemicalguys.com/torq-torq22d-random-orbital-polisher-kit-9-items/BUF502X.html?gtmListValue=Internal%20Search