How to Remove Subaru Fuel Injectors
Ғылым және технология
In this video, I show how to remove your fuel injectors. This will apply to most cars, but in this video, I am using a 2013 Subaru Legacy. The Subaru Forester, and Outback will follow the exact same procedure if using the same 2.5i engine. If you have any questions please post in the comments section.
Пікірлер: 68
Great video! Thank you for keeping it super simple and keeping a modest pace so viewers do not have to pause and rewind video to learn the process.
Great info thanks for taking the time to make this video, finding info on Foresters is tough!
Nice job, to the point, very instructive, excellent camera work, defiantly pull fuse, release pressure by running and the disconnect ground. Thanks so much
Thanks man. You have know idea how much I appreciated that. Thank you.
Great video and very helpful. This is my first time working on Subaru. Thanks. P.S. Don't forget to disconnect the negative battery cable. Safety first.
Great video! Nearly identical process on my 2012 Subaru Forester
Clear and Concise thank you
Thanks a lot !!!! Got the same Subaru , helped a lot . Thank you
Great video! Thanks a lot!!
Nice video, yeah my car has been jerking at low rpm under load, intake looks okay, so I'm thinking injectors. Just peaking in behind the covers, they look corroded even from the outside lol, but probably just really dirty. Can't imagine they're in great shape
Got inspired by the video for cleaning my 2010 forester injectors. Nowhere near the one on this video. No room at all on driver side. Many scratches on my knuckles. Could not get the rail out, but removed injectors and cleaned them. After putting them back on upside down while the rail still attached to the hose, driver side had a major leak. Now what? will try to take driver side off again. Hopefully this time I can get the rail out as well. SUBARU ENGINE SUCKS especially the driver side....
Ha! Royally nice video. Good method of depressurizing the system.
Thank you man!!!
This isn't a typical subaru engine this is a fa style which is different from the typical ej motor so this will not be exactly the same from other models
@monogramadikt5971
3 жыл бұрын
so it will be different on the 2008 outback yeah ? damn, will have to do more research ?
@dojo3175
3 жыл бұрын
@@monogramadikt5971 Did you find some good info? My mom got water in her gas and I think I need to clean her fuel injectors
@monogramadikt5971
3 жыл бұрын
@@dojo3175 not really but there are a few vids around on the effects of having water in the tank will do to the engine if not dealt with asap. a bottle of doctor fuel arived by post yesterday so i will begin adding it next time i put some people in the tank and hope it makes things improve yeah
@rocketsmall4547
3 жыл бұрын
close enough
@rocketsmall4547
3 жыл бұрын
@@dojo3175 how do you know theres water and how did it get there. why not use the fuel pump to drain the tank. un do 2 fuel lines and catch it. jump the fuel pump fuse
You might want to disconnect the battery when working with open fuel lines. Better yet remove the battery altogether.
@alexanderkillips3121
Жыл бұрын
Not necessary if he disconnected the fuel pump fuse. No fuel nearby to catch. Simply disconnected or even covering the battery would suffice
Great video
Thx for the share
Great video, for my safety, i would disconnect the battery cable before removing the injector.
@brad11344
3 жыл бұрын
Whats the car going to start on its own?
@saucon751
3 жыл бұрын
The whole point of cranking it with the fuel pump off is to get rid of the fuel.
good stuff. I assume you put the fuse back in prior to restarting the car at the end. 😁😃
Thanks for your awesome video. I have 2015 subaru out back with cylender #2 misfire, I already replaced all spark plug. But still have issue. Which side is injector #2 and should I just clean it or replaced it. Do u think it's better to replace all 4 injector? Thanks
Po302 2006 Subaru sti. Cylinder 2 . Car runs great . Compression and leakdown check ok . Po302 is intermittent. Gonna check out the fuel injector
What fuse did you pull? From what my engine is showing mine should be inside my car....yours u pull from under the hood
Cheers dude
How to diagnose a bad fuel injector?
Is this considered a fuel induction service?
Where is the exact loc. Of main fuel line of the rail?
Not as easy on a WRX turbo. there is an extra coolant reservoir near the airbox and what appear to be some very difficult to move lines.
Hey what about if it’s seized ?
Boy I hope my 2008 is just as easy man.
And then...how do you clean them? Thanks for the vid :)
what is the x shape large piece the injector connect to? I found greasing at the connection area. Want to know what that x shape large plastic piece is called. Thanks
@CoolStuffGuysLike
2 ай бұрын
Are you talking about the intake manifold?
@ruhaitian7761
2 ай бұрын
@@CoolStuffGuysLike yes. how hard to take it out? Thank you sir.
Protip maskin tape or electrical tape for the ring when working on car
@ricardomolina4605
3 жыл бұрын
How about just removing it?
You say just remove the little blue c clip but you don't explain how that is done when you disconnect the rail from the hose.
So in what part of the process do we put the fuse back?
@CoolStuffGuysLike
3 ай бұрын
Don't replace the fuse until everything is put back together. If you have the fuse in and turn the key on, it will pressurize the fuel system. You don't want that to happen (obviously) when you have the fuel rail disconnected or you will have a fountain.
Would it be too early for a change on a 2017 Subaru with 54000 miles
@CoolStuffGuysLike
3 жыл бұрын
If it is running good, I wouldn't bother.
Theres oil leaking from one of my crosstrek injector . Is that bad ?
@CoolStuffGuysLike
3 ай бұрын
That doesn't seem ideal...
Is the fuel injector in the same location for all Subaru? I have a 2007 Subaru forester.
@CoolStuffGuysLike
3 ай бұрын
It should be very similar.
I used this video as a guide but DAMN it barley helped, the 2.5GT is set up slightly different making it a pain in the ass 😂
Hi, Great video. You state that the Subaru engines are opposed engines. This appears to be a common misconception out in the world. Subaru have never built opposed engines. For an engine to be classed as an opposed it needs to have two pistons in the same cylinder. Most opposed engines are in trucks or heavy machinery and are mostly two stroke.. Look up Kommer Knocker on you tube or wiki, there are good explanations and videos..Perhaps this might clear up the misconceptions. Porsche, Alfa Romeo, Ferrari Lamborghini and numerous other engines that are flat type of engines are also incorrectly labeled as opposed as well. Regards Gary
He's getting close to shorting out the ratchet on the + terminal 😖⚡⚡
@TheWebfucifino
3 жыл бұрын
the positive terminal is covered he is close to the negative which will do nothing stupid
Battery is still connected and the tools are on the battery...While working with open fuel sources? . Danger!! Danger!!
How about you show us how to put them back.!?
@britneymidwell
3 жыл бұрын
Hey is there any videos of the h6 engine for the outback where they remove the injectors
@moneyseeker8886
3 жыл бұрын
That’s easy asf dude
@panthers559
3 жыл бұрын
@@moneyseeker8886 how about the fuel injectors for a 2006 subru tribeca , do you know if it's easy or not ???
@moneyseeker8886
3 жыл бұрын
@@panthers559 that’s easy asf dude
@577buttfan
Жыл бұрын
Just reverse the procedure dude.
This isn’t cool stuff guy like. This is bullshit I have to fix because my cars a piece of shit.
Damn ya mf talk to much just start the work