How To Clean Fuel Injectors
Автокөліктер мен көлік құралдары
Today we talk fuel injectors! As part of my rebuild project I had the fuel rail and injectors out so I decided to uninstall them and clean them before reinstall. Below you will find a link to the cleaner I used and be sure to drop any questions you have in the comments below. Thanks for watching!
Injector Cleaner: amzn.to/3zfgPiL
Find the parts used in this video here: tinyurl.com/ybpbsznj
Check out the Official RTCG website! rtcg.tv
Support the channel and get a cool t-shirt: represent.com/store/ry-the-ca...
**This video is being performed by an experienced individual. Any attempt to repair automotive parts or its systems carries risk of personal injury. Always follow safe practices when working on vehicles such as using safety glasses, jack stands, not wearing loose clothing, etc. No guarantee or warranty is implied by these videos. Use the information in this video at your own risk. If you don't think you can perform the job then do not attempt it.
***Any purchases you make using the links provided help to support the channel at no extra cost to you! As an Amazon Associate I earn from qualifying purchases.
#howto #diy #auto
Пікірлер: 131
Good guide. But remember that if you got a newer car you need to place the injectors where you removed them or reprogram the cars computer.
@randym.hernandez1408
Жыл бұрын
Yes be careful not to mix them up.
@Rythecarguy
Жыл бұрын
Wild, Didn’t even know that was a thing. Great tip! I will pin this comment.
@kellismith4329
Жыл бұрын
Yes good idea to number them, I am ocd about that everything is numbered, firing order and distributor map/rotation etc drawn under the hood for quick reference - some bolt torques too
@raiderman28
Жыл бұрын
Excellent video
@418lightning8
10 ай бұрын
I dont believe that because what happens when you need to replace one do they make a specific spare now you can't change with different types only because they have different connections please tell me which vehicle needs reprogramming for new or moved around injectors
I remember I did this, and the pressure made the Injector flew out of the tube and Carb Cleaner sprayed right in my right eye 😂😂😂 I stumbled my way to the faucet. And my eye was red and slightly blurred for the next few days 😂😂😂
Also good to try and spray the cleaner before pulsing to check if you have a leaking injector, nothing should spray or drip without power being added. Thanks for the video.
Thanks for providing the principle of fuel injector cleaning, in the past I replaced all for new ones
@Rythecarguy
Ай бұрын
No problem 👍
Bro thanks for the video. Had a bad feeling about this shop talking about replacing basically my whole fuel system as they knew I didn’t know much about cars. But saw your method and thought wouldn’t hurt trying it out before spending the 800 bucks they quoted me. Needless to say my car is running and feeling like it’s new again. I had an engine light on after doing this cleaning code is gone hasn’t came back and you literally saved me 800 dollars. Thanks much my guy
@Rythecarguy
Жыл бұрын
That's so awesome to hear and it's stuff like this that makes me love making these videos. Thanks for sharing!
@RoxusRemo
10 ай бұрын
What symptoms did you have before you tried it?
@alfonsoramirez6415
3 ай бұрын
Love hearing things like this i thankful for people that make videos and share knowledge
I remember cleaning mechanical injectors on my old Mercedes. Always did it with diesel, or at least the final rinse. Good cleaning agent, lubrication and no fire hazard while testing spray patterns.
Thanks car dude! Excellent! Thanks for sharing our knowledge
Stumbled on your channel, like the way you present things, subbed!.
@Rythecarguy
7 ай бұрын
Thanks for the sub Santiago!
Glad to see a new video. Cool seeing you in CO!
@Rythecarguy
2 жыл бұрын
Hey Clayton! It was awesome meeting you! Thanks for reaching out. 💪🏻 this video was pre-recorded but I plan to give you a shoutout on my next video 😄 Have a great weekend.
Thank you for your excellent explanation!
@Rythecarguy
25 күн бұрын
You are welcome!
Thank you sir, great video and explanation
@Rythecarguy
Жыл бұрын
Glad you liked it! Thanks for watching,
Well explained, has going to be doing mine, been looking through various sites, clarity 10 out of 10,
@Rythecarguy
3 ай бұрын
👍🏻👍🏻
Thanks for making this👍🏻
@Rythecarguy
3 ай бұрын
You're welcome. ☺️
This will help me save on buying new fuel injectors for my 89 miata mx5 new ones are spendy an the fuel. Injector tester or cleaner on Amazon is cheap 25 something not bad man thank u on the heads up on finding a tester or cleaner tool. Gonna buy me one to clean out my injectors and gonna buy new rubber rings for the injectors as well this will help an save me money n time from buying new ones thanks again man glad I KZreadd this. Have a blessing days a head of u man an be sage working on other people's car's 🙏
Nice Video and Helpful 👍
@Rythecarguy
Жыл бұрын
Glad it was helpful! Thanks for watching.
That was interesting. Had not seen that procedure before.
@Rythecarguy
2 жыл бұрын
Never tried it before. Seems to have done the trick.
I was wonder if You could help me. I a 1995 Oldsmobile 88 and was testing the fuel pressure regulater and I drained some fuel into a bottle and there is oil in the fuel. What does that mean?
Thanks for the tip
@Rythecarguy
11 ай бұрын
No problem!
very helpful video
@Rythecarguy
11 ай бұрын
Thanks man!
Want to try this on my 2000 GMC Sierra. It’s got over 300k on the dash with original injectors
@mclehed77
2 жыл бұрын
Wow 300k that's amazing I love it 😁👍🏾
@Rythecarguy
2 жыл бұрын
You should! I might help out power if they are a little clogged over time.
@kellismith4329
Жыл бұрын
Don’t those trucks have the injector spider setup that lives inside the intake ? I don’t think you will clean those ones up so simply it involves removing the upper intake, annoying fuel line connection nuts are buried behind the firewall. Those ones I wouldn’t try to clean just buy a new spider and a seal kit as they are upgraded design kits.
good job
@Rythecarguy
2 жыл бұрын
Thanks!
@haniahmed7734
2 жыл бұрын
My car is Nissan Xterra 2008, but I cannot open the valve that connects the tube and the injectors. I apologize for my language. I am from Iraq. Please help, thank you.
Is it true for 2006 infiniti vehicle that injectors are specific to their spot on the rail?
If you remove a new o-ring before cleaning (for some reason even a new o-ring gets slightly torn during cleaning by that white plastic connector, which sprays, so I use a separate o-ring for cleaning, then remove it and put back the original new one) can you put it back? Or once removed the o-ring should be replaced even if it is new? Thank you for a great film.
@CycloneCyd
Жыл бұрын
Your question seems a little self contradictory, but I would use the old o-ring for cleaning the same as CG did and then replace it with the new one.
@olenaerhardt7725
Жыл бұрын
@@CycloneCyd Yes, I'm sorry, just thought about 2 procedures and described one. See besides that cleaning I also replaced the o-rings on the bottom of course, but they were wrong ones (too thick, I couldn't install w/them into the Intake Manifold. So I removed them and put thinner ones fm/another set. I'll use those removed for cleaning, and asked out of curiosity, could I possibly reuse them. Also could be you installed the o-rings and then decided to clean them, so you remove those new o-rings, clean the injectors and put back those removed. Also there are methods to clean without o-rings, but rather using a clamp. Thank you for the replay.
@kellismith4329
Жыл бұрын
@@olenaerhardt7725 yes you can reinstall newer ones again as long as they aren’t damaged
Quick question. Would it be a good idea to replace the dampener since you have the rail out already?
@Rythecarguy
Жыл бұрын
You can if you want to knock it out for maintenance sake but it's usually a simple diaphragm that lasts as long as the car.
@yoonkim4838
Жыл бұрын
@@Rythecarguy Thank you for your vids. I plan on tackling this job but I plan on replacing all new plugs, injectors and coilpacks. For peace of mind
Good video Ray. On the injectors, if the spray tip screen is covered with varnish, brown or even black, should it be cleaned or get new ones? They work fine and spray good, but look like crap.
@Rythecarguy
2 жыл бұрын
Did you try soaking a q-tip in cleaner and rubbing the tip? That should clean it up. If that doesn't work you could probably soak them in a shallow tray. Afterward be sure to run cleaner through it to get anything that may have gotten in there out.
@CycloneCyd
Жыл бұрын
@@Rythecarguy don't soak injectors in a tray where they lay down. Find something the injectors can 'stand' in (like an aerosol lid or old mug), place the injectors pintle down and put in enough cleaner to cover the pintles only. If you soak injectors laying down so the cleaner gets inside, it can damage them (in particular dissolve the coating on the copper wire of the coil causing a short).
@TheMrBennito
Жыл бұрын
@@CycloneCyd thanks, yet what is a pintle? Sorry, I m Dutch, don't know the word
@CycloneCyd
Жыл бұрын
@@TheMrBennito The pintle is the spray end.
@TheMrBennito
Жыл бұрын
@@CycloneCyd figured so, thanks! I had checked out yr vid first before I got here, straightforward stuff!
Can you apply 3M Silicon Paste (Dielectric Grease) on o-rings instead of car oil or always oil?
@CycloneCyd
Жыл бұрын
Yes, that's what I showed in my video on injector rebuild. Just a smear mind.
@olenaerhardt7725
Жыл бұрын
@@CycloneCyd O'K. Thank you.
@Rythecarguy
Жыл бұрын
👍🏻
No inlet filters?
Which preserving agent do you use for long storage time?
@Rythecarguy
Жыл бұрын
Sta-bil all day.
If I recently changed my O rings like a few months ago can I reuse them or do these become bad as soon as you pull them out?
@Rythecarguy
9 ай бұрын
Eh. I would send it, you should be fine. Just check for leaks when you first start it back up
I've often wondered about clogged and or dirty injectors, I'm still driving my 2000 F250 V10 and have NEVER done this. she runs like a top. and yea. I run Walmart fuel!
@Rythecarguy
Жыл бұрын
I would think this would be something you would do only if you're experiencing symptoms
Have u seen a difference in gas mileage? Ive run many fuel injector cleaners the years but ive never taken it apart. My Frontier runs great other than terrible mpgs
@Rythecarguy
Жыл бұрын
I'm sorry but I don't know. I have never tracked it,
The retaining clip on the 2004 mustang is AWFUL. I have no idea how to get it off without breaking it....
@Rythecarguy
Жыл бұрын
Im sorry, jump on amazon and get yourself a new set. You are technically not supposed to reuse them anyway.
Hey Ry, I have an 07 nissan frontier and have the factory fuel injectors but my lower oring is shaped like a circular square. But when I go to name brand auto stores they have the circular round ones like the ones in this video. Have you seen this before?
@Rythecarguy
Жыл бұрын
Is it just deformed from being pressed into the manifold? What is the shape of the hole it goes in?
What about seam foam cleaner with an ultra sound cleaner device? Does it work as well? Have anybody tried it to clean injectors?
@Rythecarguy
Жыл бұрын
That sounds like a good plan. I don't have any experience with it however.
@SirD31V1D
Жыл бұрын
@@Rythecarguy Thanks for the feedback. :")
I saw a guy putting some automatic transmission fluid inside the injectors after cleaning them 😳 i just wonder why?
Thx
@Rythecarguy
6 ай бұрын
Yw
What about a back flush? Thinking about doing this
@Rythecarguy
10 ай бұрын
For coolant?
What would cause the injector to stay slightly open after the car is off, leaking into the cylinder, causing a sluggish/rich start if tried to restart after sitting 10 mins. The gaa will evaporate over night and starts fine. Do you feel the injector is fixable/cleanable?
@georgespangler1517
Жыл бұрын
There's a spring loaded seating valve in injector and an above solenoid that lifts it off the seat per pulse, spring can go bad are like a engine valve the seat can wear and cause the leak down,, replace the injector but keep an eye on engine oil for gas smell in dip stick,, a leaking injector can destroy an engine
@georgespangler1517
Жыл бұрын
@@elgastsos210 how do you know injector is slightly open,, only way is to have it out too see the leak at bottom, what the needle in fuel pressure gauge it should jumping insyinc with injector pulses,
@kellismith4329
Жыл бұрын
@@georgespangler1517 yup, I’ve seen carbs do that too and mech fuel pumps
good
@Rythecarguy
Жыл бұрын
Thank
I hope you have a fire extinguisher handy , carb cleaner is quite flammable , and you have a battery and open wiring all on the bench there , just a spark , and , poof !
@Rythecarguy
10 ай бұрын
Yea, I should really get one of those, started welding recently too.
@pobinr
9 ай бұрын
Do this job outside I'd say. That way cleaner fumes blow away too
@Rythecarguy
9 ай бұрын
@@pobinr way less fun that way though 🤪
What about changing out the filters?
@Rythecarguy
Жыл бұрын
Only tackle that if cleaning them does not help the spray pattern.
Those look suspiciously like Denso injectors. Don't they have a microfilter at the top? Nor any plastic o-ring retainers?
@Rythecarguy
Жыл бұрын
No I didn't see either
Where I can get the o ring for injectors? Thanks
@kellismith4329
Жыл бұрын
Auto parts store
@Rythecarguy
Жыл бұрын
I would go with OEM from the dealer.
is there a difference in the fuel consumption?
@Rythecarguy
Жыл бұрын
I'm sorry but I never checked any of that.
i did this and didn't know i had a fuel filter inlet inside the injector , it destroyed it .. did you remove yours prior to doing this or did it not come with one
@Rythecarguy
Жыл бұрын
No, mine must not have had any, how did you destroy the filter? There is no way you put more pressure in it than the car does.
@bcbjbggjh9102
Жыл бұрын
@@Rythecarguy i forgot to mention i did this for a 8th gen civic ...i did exactly what u did and i decided to clean the inlet hole, by surprise there were broken pieces of the inlet filter inside the injector from the force of the spray due to the inlet filter being brittle from old age, it was my fault then, shouldve check before i did it... i didn't know there was a filter on mine 😀 , should've had taken if off before i did the cleaning.
I did my injectors on my Xterra but left the fuel rail on the engine. I lost one of my blue o-rings for a few minutes and started freaking out.
@Rythecarguy
2 жыл бұрын
Oh yea. I would have freaked. Sounds like you worked it out. 💪🏻
How can I clean without that cleaner tool
@Rythecarguy
Жыл бұрын
soak just the tips?
@kellismith4329
Жыл бұрын
Use steps of various size heat shrink to adapt to the tip of the cleaner
I wish I had seen that before...but I was pretty the same except the clips 11:04
@Rythecarguy
6 ай бұрын
🤘🏻🤘🏻
That is such a cool little fuel injector tester. The issue I have is the spray can I have does not hold pressure. It leaks where the straw and the push nozzle join so I have to buy a different can.
@kellismith4329
Жыл бұрын
You can put some heat shrink tubing between them and heat to form a seal
Isn't it better to just replace the injectors?
@Rythecarguy
4 ай бұрын
Not if there is nothing wrong with them.
@Jackmanis
4 ай бұрын
@@Rythecarguy Thanks for replying. I've got a 2007 titan 190k miles gas mileage in city has been terrible. used to get 17mpg now like 10mpg. I've replaced plugs, coils and no difference. So I thought about replacing injectors. Your thoughts.
Can you please give me the address of your place so I can go to my apartment i
@Rythecarguy
Жыл бұрын
😆
Personally, not very helpful for your average joe not trying to spend $1k cleaning these. I'll let the mechanic do it, too many moving parts here. Thanks for the video though.
@Rythecarguy
10 ай бұрын
Not sure what you mean, I spent less that $50 cleaning these. Like 35 for the machine and a couple bucks for the cleaning solution.
Just buy new one instead of wasting the time cleaning them. They going to get dirty again in like in a month
@Rythecarguy
Жыл бұрын
Totally, just spend over $1000 to replace totally functional injectors. Love that idea. 😆
Spray gunk in there of any kind is a huge mistake
@Rythecarguy
Жыл бұрын
Huh?
Why would you not just buy new injectors?
@Rythecarguy
9 ай бұрын
Because to get ones that are not complete garbage you're looking at at least $500. So if they're functional and all they need to do is be tidied up the why wouldn't you reuse the old ones?