If you want to go straight to the results click on these numbers 10:44 Thanks For Watching! If you like this video here are 4 more similar videos kzread.info/dash/bejne/aaCDy9pxlLinlps.html&ab_channel=WhipCityWrencher kzread.info/dash/bejne/eIWX1sGDZtS-Yqg.html&ab_channel=WhipCityWrencher kzread.info/dash/bejne/aaV4ypl9fZWnccY.html&ab_channel=WhipCityWrencher kzread.info/dash/bejne/Y6J-2tuEZrysoqw.html&ab_channel=WhipCityWrencher

@HowtoRestoreHeadlights

Жыл бұрын

The hero we all wanted! 🤙🏽 Out here respecting people’s time!

@tonyreeves8716

Жыл бұрын

Which the best

@WhipCityWrencher

Жыл бұрын

@@tonyreeves8716 I like the Gumout.

@BuddabuttDad

Жыл бұрын

@@HowtoRestoreHeadlights 😂😂😂 comment of the year!!

@coltonstawarz5946

Жыл бұрын

Follow just because of this

I’ve been using AMSOIL products for 28 years. Never let me down.

@captainamericaamerica8090

2 ай бұрын

Way too EXPENSIVE 😮😣

@TorqueMonsterAWD

Ай бұрын

That PI is good stuff, use every oil change on our Coyotes.

@Davido50

Ай бұрын

​​@@TorqueMonsterAWD That's wise. Use Top Tier rated fuels too every fill up. *Utilizes much more detergents/additives than fed minimums* . Google Top Tier gas stations list. All i use in both my newer F150 trucks w/gen2- 3.5L GTDI engines. Can't beat Ford trucks.💯

@Davido50

Ай бұрын

​​@@captainamericaamerica8090 Try STP 5 in 1. Newer product. Bout $8-10. Works well. Lucas fuel system cleaner is another good product i use every 5k mis in both my trusty '20 & '22 F150 XLT FX4 trucks w/ gen2- 3.5L GTDI engines. 👍🏻

@404notfound.....

3 күн бұрын

​@@captainamericaamerica8090Price is an indicator of quality.

Berryman B-12 is a better FUEL INJECTOR cleaner while Seafoam is a better intake system cleaner, so that is kinda "apples-to-oranges". I can strongly endorse BOTH products, and I've used Berryman since the 1960's on small engines carburetors (the old-fashioned kind!) that were plugged-up with crud. My best friend growing up, his Dad had a 1950 Dodge pick-up that was running bad and I took-off the carb and got a $2.20 re-build kit for it, dipped the parts in Berryman Carb Cleaner (gallon can with the basket) and re-built the carb on his front porch, put it back on, and was shocked when it fired first crank! I think I was 11 1/2 years-old that summer. Mr. Stage offered me $10 about the parts and cleaners, but I knew he couldn't afford it. I shook his hand instead. The next spring I put a new carb on my parent's 1953 Chevy Bel-Air, then a starter on Paw-paw's 1952 DeSoto "Baby" Hemi (that was HARD, a 6 volt starter was HEAVY!).

@WhipCityWrencher

11 ай бұрын

Hi Ricky, Great Story👍 Thanks for Sharing👍

@isaacromero8331

4 күн бұрын

Sound like what I do but in 2024, help the family out

The cleaners may have been designed to work WITH gasoline. Like pure liquid soap dose not clean that well. It relies on the polarity of the H2O molecule to pull the dirt and grease away from your hands for example.

@WhipCityWrencher

Жыл бұрын

You could be right, I've done some others with gasoline. Here's one. kzread.info/dash/bejne/aaCDy9pxlLinlps.html&ab_channel=WhipCityWrencher

@gregarious6662

Жыл бұрын

Yes, true, but physically dissolving the carbon by itself is also a good test by itself.

@quasimotto8653

Жыл бұрын

I am also thinking that the heat and motion/flow within a running engine would also come into play.

I’m glad to see that I’m not the only one who struggles with adult proof packaging.😊

@WhipCityWrencher

10 ай бұрын

😊👍

I was a big Lucas fan till now, hello gumout

@WhipCityWrencher

3 жыл бұрын

Thanks for watching and your feedback!👍🙏😊

@jamesj.litteriojr.433

3 жыл бұрын

GUMOUT WINS HANDS DOWN!!! The P.E.A. is Nitrogen based and comes in all Shell gasoline. There is some in the 87 and 89 octane version mixed with the Ethanol. But, The 93 V-Power Nitro+ has 5 times the Nitrogen in it than the lower grades and has absolutely no Ethanol whatsoever. That is why the Shell 93 can do without the Ethanol and the Government is still happy. And no Phase Separation with gas sitting for long periods that is associated with Ethanol. I found this out by talking with Shell, reading there literature and their videos about there gasolines. Chris Fix did an excellent video on Shell gasoline including mentioning that Shell has 7 times the cleaning agents than Sunoco Ultra, etc. I always use Shell 93 with the P.E.A. no matter what the price is! My tailpipe will prove how well it is in cleaning out any carbon in an engine. It is completely black and does not taste or smell like gas or oil. And I'm not running rich , lean , or burning any oil. It is just the carbon grit that gets cleaned out completely. SHELL FTW!!!!!!!!!!! WOOHOO!!!

@jamesj.litteriojr.433

3 жыл бұрын

Try it and your engine will love it!!! :)

@WhipCityWrencher

3 жыл бұрын

@@jamesj.litteriojr.433 WOW! Thanks for all that information, that is Greatly Appreciated, Love the feedback! Thank You!👍🙏😊

@jamesj.litteriojr.433

3 жыл бұрын

@@WhipCityWrencher You are more than welcome my friend! And thank you for all the testing!

I’ve ran Seafoam for many years, even back when I had my old carbureted cars it’s always worked great. There’s a reason why it’s called a tuneup in a can.

@WhipCityWrencher

Жыл бұрын

Thanks for Sharing👍

@mrunderhood

11 ай бұрын

One thing to consider is the effect of heat and pressure on combustion with the chemical, that's not being tested. So, in my opinion this test is still inconclusive.

@jimmymccoy967

11 ай бұрын

@@mrunderhood Well seafoam is like straight alcohol it’s a good cleaner for small components like injectors and carb parts like jets, needle valves etc.

@reubenmorris487

4 ай бұрын

@@jimmymccoy967 Seafoam is not an alcohol-based cleaner like B-12 Chemtool.

Red Line also has the same Fuel Cleaner specifically for the motorcycle, I have 2015 Ninja 300, use that in the fuel tank before every oil change, my bike has 41K miles on ODO, it does RUNS LIKE A NEW, very responsive throttle. Periodicall use of these additives keeps your vehicle / motorcycle on optimum performance level, do like them. Thanks for sharing this video 👍

@WhipCityWrencher

3 күн бұрын

You're Welcome and Thanks👍

I've always liked the B12. I like the Gumout too. If you run any of these in your fuel every 2-3 months, they would all work just fine and would keep stuff from building up. Thanks to the maker of the video

@WhipCityWrencher

Жыл бұрын

You're Welcome and Thank You!

@bobbyb177

10 ай бұрын

I was a big gumout fan for years and then I tried the B12... for me the B12 does a better job.

I used bottle of Lucas in about 7 gallons of gas. It cleared my reoccurring P0406 EGR code. Awesome stuff

@WhipCityWrencher

Жыл бұрын

Thanks for Sharing, don!👍

I tried out the Redline & it’s a good one I have to admit it’s on the pricey side at $15.00. A bottle .I’ve used Lucas before it’s a great product as well ! They expanded there products. Both the Lucas & Redline are two good products! I’ve heard good things about BG products never tried them ! BG products are on the pricey side . But if something works & lives up to its clam . Well then makes good sense to stick with what works . I’m shocked that Lucas didn’t do that well after seeing this I’m convinced to stick with the ones you mentioned that worked . The Amsoil is one I never tried . They have a great line of Engine oils which I heard where good . Although I never tried them .

I've had really good performance with Techron fuel system cleaner. Made by Chevron Fuel injector cleaner is designed to clean fuel injectors and intake valves at engine operating temperatures. It's not really meant to clean plugs by soaking at room temperature.

and the pudding cups return! Love it. I would only suggest letting them sit on a white background to maximize the view of the sludge. I understand that Lucas didn't do well in THIS test but there are tests where it was actually put INTO the fuel and run through the engine and it does well. I know it works SO well it completely destroys the dirt instead of it just falling off the plug.

@WhipCityWrencher

3 жыл бұрын

Thanks for the white background suggestion, if I do this test again I'll try it out. 👍🙏😊

@raysmith6930

Жыл бұрын

Thank you for that it was really good. I've been using Seafoam, but I'm going to try Gumout.. Thanks again 👍👍

We own 3 vehicles. I put in a can of Gumout every 6K miles on each of our vehicles to keep the fuel ejectors clean. I also change the oil every 4K miles with Kirkland full synthetic. Every 30K miles I have the front and rear differential, transfer case and a transmission flush. The radiator is back flushed every 3 years or 36K miles. Every 60K miles I replace all the belts and hoses. We generally keep our vehicles for 15-20 years/ 250-300K miles or until they need a major repair. When we do sell our vehicles our family and friends always want first dibs because they know what a maintenance nut I am. The most miles I ever got out of a vehicle was a Toyota Corolla. When it finally died it was 24 years old and had a Whopping 488K miles. It was 5 years old when I bought it with 70K miles. I bought it from my sister for $500 for my college car. She paid only $950 for it when it was 3 years old with 21K miles from my grandparents as her old Celica died so my grandparents sold it to her for her college car. When it died in 02, I replaced it with a new Camry.

@WhipCityWrencher

11 ай бұрын

Hi David, Regular maintenance is key to longevity. Thanks for Sharing👍

@jamesjones4309

6 ай бұрын

Lucas sucks besides the power steering fix, Redline is best followed by Gumout and Berryman

@brettkrueger9464

3 ай бұрын

Good for you

From my own experience I bought a bore cam just because it was 70% off. I had some of the spray Seafoam laying around and figured since the carb was off I would spray a @ a 1.5 second blast down the intake runners and take a look. The intake valves had some carbon. As soon as I looked I could see the Seafoam bubbling. It was also "smoking" a bit. I ran the camera in to the valve and it left a clean spot where it contracted.

@WhipCityWrencher

Жыл бұрын

Thanks for Sharing!👍 Yep, another good way to clean the intake valves and tops of pistons Is to spray it in your intake or in your case carburetor while the engine is warmed up and running. Using quick short sprays, just be careful not to spray too much at a time.

@peteloomis8456

Жыл бұрын

A old trick years ago to clean up carboned up valves was to start the engine and get it up to operating temperature then used a small cup with cold water in it and slowly pour water down the throats of the carburetor while the other hand rev's the throttle on the carburetor and what happens is the cold water against the hot carbon on the valves breaks the carbon off of them . I use to do this to my parents cars back in the late 60s early 70s and you could see all the carbon deposits and black crud left on the drive way after . Obviously that's much harder to do with fuel injection now but it does work on carbureted vehicles . B12 chem tool use to make these cans that had screw on ends and a screw on adapter for the Schrader valve on your fuel injection line and what we used to do is hook the can and the adapter up to the schrader valve then pull the fuse out for the fuel pump then start the vehicle and let it run until the can was empty . So what this does is it makes the B12 get pulled through all of the injectors at full strength and concentration instead of being mixed with fuel that dilutes the injectior cleaner . I can buy a 15oz can of B12 at Walmart for just under 5.00 a can now just a month ago but the cans I see don't have those screw or threads on the ends so that might be something you would have to order from Berrymans or special order it maybe from Walmart or the auto parts stores and see if they still have those adapters for the schrader valves or not . The thread size looks very close to your AC adapters so you might be able to try a ac adapter for cars to make it work on the can then slip a hose over it and clamp it after you use a tire valve removal toolon the Schrader valve then slip the hose over the valve stem and do the process of fuse removal and start procedure. The vacuum from the engine sucks the injector cleaner past the injectors and right into the combustion chambers so that's the other reason why to pull the fuel pump fuse out while cleaning so it's at full strength and when the engine stops running the can is empty and you can either call it quits or run another can through the injectors if they are really clogged up bad but be warned they might not be clogged bad it might just be worn out injectors where the pintles inside wear out and leak or the internal solenoids get weak and don't open up or close off all they way or open and close erraticly causing poor performance and fuel mileage .

@WhipCityWrencher

Жыл бұрын

@@peteloomis8456 Hi Pete, Thanks for Sharing! Good info!👍

Great video. Love to watch actual testing. Thanks for putting in your time to do a quality job.

@WhipCityWrencher

9 ай бұрын

You're Welcome Andrew Glad you liked the video, Thanks👍

GREAT video! I used to use Lucas a long time ago. I use gumont for the past year now and it works pretty darn good 👍🏾👍🏾👍🏾

@WhipCityWrencher

Жыл бұрын

Thanks for Sharing!👍

I was shocked to see Lucas be the one to not work so well with your soaking test. My friends 2009 Kawasaki Ninja 250 sat in the garage for 9 years straight. I drained the gas, didn’t take apart the carb and wanted to see if Lucas would clean the carburetor with out having to take it apart with adding new gas. Well it did, started it everyday pumping the throttle, day one nothing. Day two, it started to kick over, day three started to kick over and run really rough. Day four idled good and let it run to get more Lucas in the carb. Day five I got to ride it, not 100% smooth, so I ran the Lucas really rich in the gas and maybe put three to four times as much as recommeded. That did the trick and now it starts up great, not the smoothest at low rpm’s but Lucas carburetor/injection/fuel cleaner worked with out ever taking the carb apart that sat for 9 years w/old gas in the lines! There is something to say about that. I flushed out the lines with new gas before adding Lucas to the gas tank, I just wanted to be clear about that.

@WhipCityWrencher

Жыл бұрын

Thanks for sharing!

@jonathanwaldrop8154

Жыл бұрын

Would of made some good content next time record your test😊

@Wis-husker

Жыл бұрын

I am definitely a Lucas fan...excellent product & results!!!

@rkba4923

Жыл бұрын

I did same with an 06 Victory Kingpin MC that had been sitting in garage for almost 6 years and had had a half tank of gas evaporate from the tank/system; but, I was using Seafoam and it only took 3 tries/days.

@BoyFindsTako

Жыл бұрын

@@rkba4923 I hear great things about Sea Foam. So on the third day did it run smooth? I never got the Kawasaki Ninja 250 to run smooth at low RPM’s. Starts fine, but jerky when applying the throttle to take off. Maybe Sea Foam can fix the difference from here!

Interesting "layman's" test. Not scientific (as you stated) due to some variables. But still a decent test. The Lucas product appeared to do very little, nearly nothing that was noticeable. I've noticed over the years that the STP Concentrated Fuel Injection Cleaner (black bottle) works well as I've never had an Injector issue, ever. Also, wonder about Royal Purple product that wasn't included. All in all though, good test without diving deep into chemistry, product makeup. Hmmm...only one product mentioned P.E.A. Noted that you poured the various products directly from the bottle into each small bowl, as opposed to mixing it with gasoline in a ratio as listed on each manufacture's label. It would be interesting to redo the test with product & gasoline (ratio per label) just to see if results were different. Thanks for running this test and posting video.

@Bucephalus84

Жыл бұрын

Royal purple is prob the best I've tried. I'm shocked that Sea Foam did as poorly as it did. Bg products are great as well.

Love the channel! Then ol’ boy that showed me how well seafoam works put it in the gas tank as per instructions. However he also put a little in every vacuum line inbound to the engine. Before this was done, my 96 Lincoln was running a little rough. Not quite missing bad, but entering the interstate, you knew to not shoot any gaps. During that initial treatment (done in the parking lot at work) the Secretary came running out to make sure we were ok. The exhaust 0:00 cloud was enormous. No wind at all made sure the entire building knew what we were up to. It worked. No more hesitation at all after the treatment. I did it every other month, Until every electrical device broke. Scraped the car. Unfortunate, as the drivetrain was bulletproof!

@WhipCityWrencher

Жыл бұрын

Hi Rick, Thanks for Sharing!

I have 2017 Toyota 86 with about 70000 miles on it . Today check engine light came on and I took it to a car place near me house had them code it and it spit out P0420 "catalyst System Efficiency Below Threshold Bank 1 " . The sale guy told me to try Lucas and to my amazement it helped ! The light went off and so far so good .....

I may be wrong but I was under the impression that these cleaners were designed to work best when the engine is at normal operating temperature.

Thanks man. Regards from Mexico.

@WhipCityWrencher

3 жыл бұрын

You're Welcome! Regards from Ma.🙌😊

I got some Howe's based on a recommendation. I found out it really isn't meant for cleaning, but more for lubrication, anti jellingand water control. Last week, I drained 1.5 quarts from my water fuel separator and let it sit overnight. Zero water. Im pretty happy with that.

The video I NEEDED to see! I have zero knowledge and experience about this stuff and was going to get lucas oil or redline based on peoples OPINIONS! I am so glad you pick those popular brands and let the sit over night! Thank you! I got two cans of gumout! Will use soon😁

@WhipCityWrencher

9 ай бұрын

I like the Gumout and B12 between these brands. Glad you liked the video😊Thanks👍

Lucas is primarily an upper cylinder lube, and it excels at that. I ‘VE used it in GM vehicles.

@WhipCityWrencher

Жыл бұрын

Hi James, Thanks for sharing!

@jklewis54

Жыл бұрын

What about in CVT transmissions?

Gumout and b-12 work great for me. I've used the chevron techron , previously and it didn't make a difference in my truck. B-12 I also use in all of my lawn equipment , I get excellent results immediately

@WhipCityWrencher

9 ай бұрын

Thanks for Sharing👍

My good friend who swore by Lucas got my SUV truck more gas mileage using it I was amazed ,I still use all the products when needed .

I've always used Lucas and I'm happy with the results. I picked up a Scion tC fairly cheap because it had a rattle nobody could figure out. I took it to different mechanics and they always wanted to charge me a ton of money for major repairs. One day I ran some Lucas through it and the rattle went away 😂. I'm still not sure what it was but it went away.

@WhipCityWrencher

Жыл бұрын

Thanks for Sharing 👍that was a cheap fix.😊

@thaothao8324

Жыл бұрын

Did u have to add some more or was it just once? One bottle?

@vision1707

7 ай бұрын

I have 2017 Toyota 86 with about 70000 miles on it . Today check engine light came on and I took it to a car place near me house had them code it and it spit out P0420 "catalyst System Efficiency Below Threshold Bank 1 " . The sale guy told me to try Lucas and to my amazement it helped ! The light went off and so far so good .....

@vision1707

7 ай бұрын

So the problem went away for good ? I got a 2017 Toyota 86 with 70000 miles -

@lorenray9479

5 ай бұрын

Lucas gave me back my original mileage, and runs better at 33,000 miles. By 33,500 miles it gets less mpg after only 150 miles per month on cheap gas. I better use Lucas every fillup with stale cheap gas. What? Better fuel in chevron, mobil? Maybe, but I think gas gets stale. I'll try to keep tank close to full.

7 minutes & the test finally starts! good god did we need to see the opening those cans?

@WhipCityWrencher

Жыл бұрын

Check out my pinned comment that I just put up. Viewers can click on the numbers to skip the beginning of the video.

That Lucas is more of a upper cylinder lubricant it’s good for lubing up the fuel system and cleaning injectors should’ve used their actual fuel system cleaner the one in the white bottle

@WhipCityWrencher

3 жыл бұрын

I didn't know that. Thanks for watching, and sharing that important info.👍🙏😊

@LoveLikeaHurricane

3 жыл бұрын

Looks like it’s a competitor to the Amsoil Upper cylinder lubricant. I would like to see the upper cylinder lubricant test. The amsoil one claims it helps with corrosion, that’s the selling point for me as some of my cars don’t get driven enough and a gas tank might last me a few months

@WhipCityWrencher

3 жыл бұрын

@@LoveLikeaHurricane If the gas sits in your tanks for months, Id put some STA-BIL in the tank here's a link www.walmart.com/ip/STA-BIL-Fuel-Stabilizer-32oz-22214/16645039 Thanks for your feeback👍🙏😊

@franciscoandrade8885

2 жыл бұрын

True Lucas is used to clean and lube injectors and help spray better.

Thicker ones may be working better when mixed with the fuel. But it is a good experiment. Thank you for sharing!

@WhipCityWrencher

Жыл бұрын

You're Welcome!

Very good. The Sea foam performed OK.

Great, but holy moley you did this indoors!

@WhipCityWrencher

Жыл бұрын

I did, It was winter and too cold in the garage.

If you ever do a Part 3 I've heard good things about Chevron Techron Concentrate. It supposedly has a lot of PEA too.

@WhipCityWrencher

2 жыл бұрын

👍

Great job. Absolutely enjoyed it. Shared with family and friends. Keep them coming.

@WhipCityWrencher

2 ай бұрын

Thanks!👍💯 I'm glad you liked the video.

Lucas for me. Have been using it since the day I bought my 89 S-10 blazer.Gave it away with 359k. Never ever had a problem. Still had the original muffler. I buy it in the gallon size and just keep refilling the little bottles.

I like the B12 not only does it make my engine run smoother I noticed the increase gas mileage when it's in there so it pays for itself on top of cleaning the injectors! Nice video thank you!

@WhipCityWrencher

Жыл бұрын

Thank You! and Thanks for sharing!👍

@jerrydonquixote5927

Жыл бұрын

@@WhipCityWrencher you bet! 👍🏼

@cezarrodriguez9827

Жыл бұрын

B12 can you buy at Autozon

@peteloomis8456

Жыл бұрын

@@cezarrodriguez9827 Most Walmarts sell it and much cheaper that the auto parts stores and even through Berrymans so look into it. Walmart sells in such volume that they can sell it and engine oils and transmission fluid quite a bit cheaper than the auto parts stores can even .

@expertopinion8111

Жыл бұрын

Do you use a whole bottle and how often do you put in tank I usually keep my tank around half

Great video! Thank You for making it. I'm going with B=12 or Gumout

@WhipCityWrencher

Жыл бұрын

You're Welcome, and Thank You!👍 Good choice btw.

Great video , thank you ! Made up my mind in which to use 😊

@WhipCityWrencher

8 ай бұрын

You're Welcome, Thanks👍

Gumout with PEA is very good cleaner. I've used it on my vehicles and it does a good job.

Berrymans has acetone a very strong solvent. They put acetone in fingernail polish remover

As a good product & value I would go with Berrymans & Gumout

Ive found that Redline's product has the best results. There were noticeable improvements in fuel efficiency, and the engine seemed a bit more peppy. Over the years, I've tried other brand's fuel additives, and I noticed nothing. So far, only Redline.

@WhipCityWrencher

Ай бұрын

Thanks for Sharing👍

@nicco.d

Ай бұрын

@WhipCityWrencher thanks for making the video. You're gonna save a lot of folks money.

@WhipCityWrencher

Ай бұрын

@@nicco.d Thanks😊

Awesome! thank you for such clarity.

@WhipCityWrencher

Жыл бұрын

You're Welcome! Glad you liked the video.

It's good to run Lucas oil as a lube in your gas tank, especially after using a fuel system cleaner. Keeps everything working well. Not as good of a cleaner but definitely a good lubricant and general maintenance product.

@WhipCityWrencher

2 жыл бұрын

Yep, that seems to be the consensus on the Lucas Thanks for your feedback👍🙌

@henryewald9327

2 жыл бұрын

I would like if they were a lot more proactive instead of just another Lubricant.

@luedog8385

Жыл бұрын

Lucas is just mineral oil and mineral spirits. Just get some baby oil and mineral spirits 😌 I like looking us the msds on these things

@dfls5069

Жыл бұрын

Yeah, I noticed that on the Lucas. Good lubricant for the fuel but not a strong cleaner

@chrisjfox8715

Жыл бұрын

What does that even mean tho...? Call me ignorant but what is it that needs "lubricating" in the fuel system?

Got check engine cylinder 4 misfire right after my gas light turned on, threw in a bottle of redline and drove to the gas station to fill up, drove home and reset the light and hasn't come back since👍

@WhipCityWrencher

Жыл бұрын

Awesome! Thanks for sharing!👍

In all my small engines, as in my generators. I use 91 octane with the b12 and marvel mystery oil. Check by removing the intake and look at the valve and where the fuel is contacting the valve going into combustion chamber was as shiny as a new nickle. I also use this combination in my vehicles, and you can use this combination with ehthanol blende gas of different octanes with the same results, I just prefer using my mixture as above for my small equipment because i dont use them enough to use ethanol and the problems it can cause by letting it set for extended periods of time. In finishing b12 is the best I've found for injectors and clean carburetors along with the marvel mystery oil, have been using this combination for well over 25 years and marvel for over 60 plus years

@WhipCityWrencher

2 ай бұрын

Thanks for Sharing👍💯

My check engine light came on with vsc and trak off light and ewhen I added the gumout tune up and I took it for a 60 minute drive check engine light disappear and the codes that coming up before was PO171 AND PO174 Something like that but nevertheless that can clear the codes off.. so I always keep a can of it now.. I'm glad you did the study to compare.👏🏽👏🏽👏🏽👍🏼👍🏼👍🏼

@WhipCityWrencher

2 жыл бұрын

Thanks for sharing!👍

I've tried a ridiculous amount of fuel system cleaner / Treatments and from my experiences I would hands down use the Redline. I don't even bother with anything else anymore. The Redline really does work. Even better if you use it before you have carbon buildup as a preventive / maintenance product.

@WhipCityWrencher

3 жыл бұрын

Thanks for your Feedback👍🙏😊

@thinkforyourself5672

2 жыл бұрын

@Tee Mack, A lot of companies recommend doing it when you change your oil. Probably just as a reminder to use the treatment. I don't see a reason you would have to worry about changing your oil as a direct result of the Redline or any fuel treatment. The 2 systems should be completely separate from one another. Meaning your fuel system and engine oil. I'm a little OCD so I use treatments more often than I need to. If you use the Redline I suggest, Using a full bottle for the first treatment and then I do a half bottle every 1000 to 1500 miles after. And in between I'll use the small bottles of Lucas or Seafoam injector treatment every few tank's because I'm a Psycho lol.

@WhipCityWrencher

2 жыл бұрын

@Tee Mack I never do, but actually, that may not be a bad idea.👍🙌😊

@josh6998

Жыл бұрын

How often do u use it ? And how much u think is should put in my ram 1500 RT

@eltiburon17ify

Жыл бұрын

Wil the synthetic oil on the red line , harm the catalytic converter?

The Lucas looks the best to me as everything is actually dissolved as you can tell the plug is clean and instead of leaving huge particles it completely dissolved then.

@WhipCityWrencher

Жыл бұрын

Thanks for your feedback!

I owned a CH model Mack truck. It was a total dog exclamation point I fueled and added a gallon of Lucas upper cylinder lubricant and after an hour of driving I had double the power double the pickup. I have never used a additive that gave me this kind of noticeable change in operation.

@WhipCityWrencher

Ай бұрын

Thanks for your feedback👍

I like Berryman's, been using it a long time.

The gumout with p.e.a will prob clean the carbon off very well. P.e.a. is a good solvent for carbon build up.

I use BG 44K . ABSOLUTELY the best & SUPREME fuel injection cleaner.

@WhipCityWrencher

Жыл бұрын

Hi, curran Here are two videos with BG44k in them. kzread.info/dash/bejne/aaCDy9pxlLinlps.html&ab_channel=WhipCityWrencher kzread.info/dash/bejne/Y6J-2tuEZrysoqw.html&ab_channel=WhipCityWrencher

The first video I saw was about a k&n oil filter is the second video I watched and I now am subscribed

@WhipCityWrencher

2 ай бұрын

Thank You and Welcome, I hope you enjoy the videos👍

Thanks for this old video. I use 'Howes 103020 Diesel Defender' for my 5.9 diesel, but it isn't for gasoline vehicles. I think the Lucas is a detergent-based product whereas the others are dissolvents, which is likely why the Lucas didn't compare well by just soaking. I am trying to determine what to get for my Chevy 325ci that gets minimal drive time. I used to use the Lucas for both engines before switching to the Howes for the diesel.

@WhipCityWrencher

7 ай бұрын

Hi Jim, You're Welcome. BG44 is good stuff but on the expensive side.

@mutantryeff

7 ай бұрын

@@WhipCityWrencher I likely will not get any until November. I have heart surgery on 9/22 @5am for afib issue. It is called cryoballoon ablation. I will be limited to doing nothing much for a week, and was told I wouldn't feel good for about a month. I might put an order in via Amazon tonight, but probably not do anything until I'm back up to snuff.

@WhipCityWrencher

7 ай бұрын

@@mutantryeff Sorry to hear that. I hope you have a speedy recovery and feel better real soon! Prayers sent your way, God Bless.

I've used the three common ones on multiple different vehicles, and have seen numerous different tests on KZread. It depends on the method of cleaning, but I swear by the B12 Chemtool when diluted in the gas tank (its the most powerful solvent, hence the evaporation and 'chunks'). It's in a metal bottle because it eats through plastic, etc. @ full concentration😳! But I also Seafoam (half bottle) directly in the vacuum lines (more concentrated that way), with half the bottle in the engine oil for 200+/- miles before oil change. The 'Seafoam smokeshow' proves just how effective it is directly in vacuum lines, but it's not nearly as effective in gas tank as the potent and bargain ($3Walmart)B12 Chemtool. I'm not surprised by the results, especially the weak Lucas. (Their transmission additives are excellent, though) You feel a noticeable difference when using Chemtool (the only solvent here) in the tank even on a well maintained engine, and an occasional Seafoaming in the vacuum lines.

@WhipCityWrencher

3 жыл бұрын

Thank you for watching and your feedback. I Appreciate it Greatly, Thank You!👍🙏😊

@austonsosebee7530

2 жыл бұрын

The smoke coming out after using seafoam is just the naptha and fine oil in the seafoam burning. It's also made originally for 2 stroke engines.

@JA-rn5qv

2 жыл бұрын

Auston is right. Me and a friend tested Seafoam on a new engine to see what would happen when ran trough an intake system that's brand new and zero carbon/gunk present. Result was it produced just as much smoke as ever, meaning, the smoke you see when using Seafoam only proves that the product creates a ton of smoke under combustion. No surprise there being that Seafoam is oil based where-as B-12 is solvent based. You burn oil, you get smoke.

@tacticalcenter8658

Жыл бұрын

Austin is correct. Its just a reaction of the product, it's not actually doing what you think it's doing. ie it's not cleaning the engine or what not that people think it does. The age of the internet goes both ways so its easy to get confused. PEA is what works. I would assume products with the most concentration of PEA in a 1/4 to 1/2 tank gas. There might be lab tests done to show which brands have the most. But there is always the possibility of variations per bottle.

@mannygonzlz1630

Жыл бұрын

@@tacticalcenter8658 🤣😂🤣🤣 Good one

If you do another test, 104 Fuel Injector Pro and Liqui Molly DIjectron ( The new version for DFI engines) both work extremely well

Great video. Suggesting adding heat into the test samples. I'm sure temperatures plays a huge factor.

Thank you for this video I really appreciate it

@WhipCityWrencher

Жыл бұрын

You're Welcome!

Absolutely amsoil all the way well worth the money redline is also great but Lucas no way waste of money

@WhipCityWrencher

3 жыл бұрын

Thanks for watching!👍😊

@andrewc9790

3 жыл бұрын

If you read the bottle it says Upper Cylinder Lubricant with Injector Cleaner. It's not a dedicated fuel injector/spark plug cleaner like the rest.

@twotimes2099

2 жыл бұрын

Try putting a little bit of each one of these on a painted surface and see what it does. The only one thats strong enough to strip paint is the B12. Chemtool is extremely strong stuff It's all I use after 20 years that actually works quickly. I put it in the gas tank I've used it in engine oil as a flush on older cars I've even went as far as to mix B12 with automatic transmission fluid and poured it into each cylinder to soak and free up a couple stunk piston rings. Works great and cheaper than all the rest at that 👍

Was a big Seafoam fan. Bought the gumout today based on the results from this video. You should test air/cabin filters as well, perhaps motorcycle oil filters. Cheers.

@WhipCityWrencher

8 ай бұрын

Cheers! Here are a couple Motorcycle oil filter videos, kzread.info/dash/bejne/g2qklK2wmLCpibA.html&ab_channel=WhipCityWrencher kzread.info/dash/bejne/qGmlo7ZshNHLebg.html&ab_channel=WhipCityWrencher

You just saved me from making a very big mistake thx!!!!

@WhipCityWrencher

Жыл бұрын

👍

Thank you for sharing this my friend ♡

@WhipCityWrencher

Ай бұрын

You're Welcome👍💯

First off I want to say great video. I heard seaform was good but gum out seems to be the best. I wonder if heat would help the cleaners work better? But I'm definitely going to get some gumout now. This video was definitely a service to us guys still learning about cars.

@WhipCityWrencher

Жыл бұрын

Thank You! I Appreciate it.👍

Superb Test. Scotty also recommends gumout over the other's as well. CHEERS!

@WhipCityWrencher

2 жыл бұрын

Thank You! Cheers!👍

@michaelG2310

2 жыл бұрын

I stopped watching Scotty on principle alone. His clickbait titles are always "you're stupid if you do this" or "you should be shot if you bought this car". Like relax dude, we're just out here trying to learn

@hexaarmortaga9957

2 жыл бұрын

@@michaelG2310 it’s just clickbait lol. He doesn’t actually mean it.

@stevepsmoldycannoli3732

Жыл бұрын

@@michaelG2310 Scotty is the "Max Headroom" of auto repair... 😜

@highwaystar3780

Жыл бұрын

I'm wondering how safe this stuff is in an Already Volatile V12 German car?

nice simple and practical test.

@WhipCityWrencher

2 жыл бұрын

Thank You! and Thanks for watching and your feedback.👍🙏😊

This was awesome, I also liked Lucas but now I'm getting gumout. Amsoil wasn't bad so it's 2nd place. Thank you.

@WhipCityWrencher

Жыл бұрын

Thanks!👍

I know sea foam and Lucas do best in a running motor, the B12 and gum out uses a lot of ether that's why they do good on this. Seafoam probably cleans the engine the best.

Best video ever. This was exactly what I was looking for.

@WhipCityWrencher

2 жыл бұрын

Thank You! I have another one coming out on Aug.3rd

Great Video, I bought Berryman B-12 right before watching this Video. I'm happy with decision tho. Worked in 15 mins.

@WhipCityWrencher

Жыл бұрын

Thanks! Glad you liked the video. I have a few others you might like. kzread.info/dash/bejne/Y6J-2tuEZrysoqw.html&ab_channel=WhipCityWrencher www.google.com/search?q=whipcitywrencher+fuel+injector+cleaner&rlz=1C1UEAD_enUS942US942&oq=whipcitywrencher+fuel&aqs=chrome.1.69i57j69i59j69i60l2j69i65l3.12745j0j15&sourceid=chrome&ie=UTF-8

The tough part of run was tests like this one is they not only brake down gunk through the injector but also brakes up built up residue through the explosion in the piston chamber so difficult to show during that. But showing how much it can clean burnt on contaminants is important as it shows what it can do at the stage prior to the explosion.

@WhipCityWrencher

Жыл бұрын

Hi S.O.S., Thank You For Your Feedback!👍

Thanks for the video. Have you thought of removing the oil from the threads first? I’m more interested in the deposits on the Electrode and Grnd elect. 👍

@WhipCityWrencher

3 жыл бұрын

Thanks, Maybe next time🙌😊

Now warm each product and see what they do

Great video!!!!! Man I’ve been getting ripped off by Lucas all these years!!!!

@WhipCityWrencher

Жыл бұрын

Thank You, Glad you liked it.

100% hands on experiment. 👍

@WhipCityWrencher

5 ай бұрын

Thank you! Cheers!

I just bought my first cleaner for my injectors on my 90K Toyota Venza. The dealership told me they needed cleaning at a price of $250. I purchased Red Line (Amazon Prime for $9 ea in set of 4) after seeing your video and reading some other blogs. I'll be surprised if any change in performance or mileage. But I"ll be watching your channel. Good information.

@WhipCityWrencher

3 жыл бұрын

Hi Keith, If they are really bad then I doubt a 16oz cleaner in a bottle mixed with gas will help much. It's worth a try though. Also, use top-tier gas I'll put a link down below in case you don't know what stations sell top-tier gasoline. Is your engine running rough? I'd take a bottle of the Berrymans B12 you can get it pretty cheap at Walmart and put a can of that in the tank also. I like to put one can/bottle of Gumout with PEA. and one can Berrymans at the same time in my tank, probably about 2 to 3 times a year. Thanks for watching and your feedback.👍🙏🙌 Good luck with your Toyota. www.toptiergas.com/licensed-brands/

@opera93

2 жыл бұрын

Thanks, what all happens, and problems: AND RESULTS? Using REDLINE?

@WhipCityWrencher

2 жыл бұрын

@@opera93 It's hard to tell because it starts out red but I don't think it did all that well. IMHO the Berrymans, Gumout, and Amsoil did the best.

@BabyGangsterIsMe

2 жыл бұрын

us Techron, íts better

@BabyGangsterIsMe

2 жыл бұрын

also, use TOP TIER GAS..dont use cheap gas... use SHELL, EXXON, BP ... if cheap gas brand, dont use it or u will have problem with FUEL injector

Pretty good video... I think you should've mixed each treatment with it's recommended amount of fuel though for the test. Testing it straight out of the bottle doesn't really give an accurate representation of what it would do when mixed per the bottle instructions.

@WhipCityWrencher

2 жыл бұрын

Thank You, I do have some more videos coming up with gas mixed in. Thanks for the suggestion.👍

@jahbay

2 жыл бұрын

Agreed

@ssjlkrillin

Жыл бұрын

It works for me. As if gasoline will magically make Lucas perform better. Testing the concentrate alone is still a valid evaluation because you're testing the effectiveness of the concentrate.

@ssjlkrillin

Жыл бұрын

Also, bear in mind that formulations vary with gasoline from one region to the next, as well as across different brands as well as between different octane levels, so this further justifies the validity of testing the concentrate in isolation, as the concentrate's formulation remains constant and is not diluted by a mixture with gasoline which may not accurately present what you may use.

Nice vid! Swayed me to go with gumout for first treatment or two at least, hopefully less risk of chunks clogging anything.

@WhipCityWrencher

Жыл бұрын

Thank You and good choice!👍

I’ve ram seafoam for 20 years or more on the farm and landscaping equipment, everything starts like new everyday every after sitting for a while. Amsoil makes hands down the best oils but you pay for it too.

I think Chem Tool. I took a Toyota pickup to get smog it didn't pass. I forgot to put chem tool before smog test. So I bought CHEM-TOOL put it in drove about maybe 15 miles up and 15 back went back to smog shop it passed. Now I use CHEM-TOOL every time I have to take a car to a smog shop .

@WhipCityWrencher

Жыл бұрын

Wow, That's pretty good, Thanks for Sharing!👍

I’m late to the party here, but surprised that the techron additive wasn’t used. That is the most consistently highest ranking cleaner through just about everybody’s “best of” lists.

@WhipCityWrencher

Жыл бұрын

I did one test with Techron, here it is. kzread.info/dash/bejne/aaV4ypl9fZWnccY.html&ab_channel=WhipCityWrencher

@AUXdrone

Жыл бұрын

@@WhipCityWrencher awesome, thank you. I missed that video :)

For the first time ever, just this year, I poured cleaner into my Skidoo. I purchased "GUMOUT" from the local Crappy Tire. However, oiginally I intended to buy "SEAFOAM", because i've heard from more than enough people who swear by it. I ended up buying the GUMOUT because I did not see SEAFOAM on the shelf. I poured it into my snowmobile wondering/hoping/praying that I made the right choice. And by God, the sled runs like a spinning top! There is nothing wrong with GUMOUT and thank you for reassuring me with this video! A lot of these are just big fancy names. GUMOUT works!

@WhipCityWrencher

Жыл бұрын

Hi Mike, Thanks for Sharing your experience with the Gumout! Glad it worked for you!👍

Great Great Great video. Thank you buddy. Your video is very helpful. Thank you.

@WhipCityWrencher

6 ай бұрын

You're Very Welcome! Glad you liked the video I appreciate it, Thanks!👍

Berryman can can eat rubber hoses so watch out seafood is my go to for cleaning and marvel mystery oil for lubrication

I get the Amsoil for about $11 from my local rep. Not too much more than some of the others.

@WhipCityWrencher

2 жыл бұрын

Good deal, I got a new video. showing, January 4th. also with the Amsoil in it. You make like the video. Thanks for watching and for your feedback👍

Seafoam does exactly what it says it does, it works wonders in my junkyard built 1999 Ford Ranger XLT with the 2.5 4 cylinder engine,230000 miles. Runs like it has the old 302 BOSS V8 under the hood.. I run a can thru the fuel system ever other month. 5 oz in the oil 600 miles before an oil change. In an old Rangers, you expect the tappets to be rattling, but the Seafoam keeps the sludge cleared away. The engine is as quiet as a guy could want. I swear by it. I do a lot of driving in the badly maintained snaky roads of rural Southeastern Kentucky, rough country at best

@WhipCityWrencher

4 күн бұрын

Thanks for Sharing👍

Tried them all and berrymans is by far the best.

Amsoil products are the best I think, thank you for sharing your video!

@WhipCityWrencher

4 ай бұрын

You're Welcome, Thanks!

Most of the additives seem to be harsh or aggressive in cleaning which is awesome if that's what you need. Lucas, as everyone says, is an upper cylinder and fuel system lube. All have a purpose depending on your situation.

@yehornaumov5893

Жыл бұрын

Yes Lucas is fule lubricant

@dreppingjoss7203

Жыл бұрын

@@yehornaumov5893 fule

@Mr.boxxchevy

10 ай бұрын

​@@dreppingjoss7203he's a Frenchy

@factanon

10 ай бұрын

I kind of thought it was a bit strange to have the lubricant there and not the actual Lucas Fuel System Cleaner

You're a good video thank you

6 months ago my check engine light came on, I was told I needed to replace my catalytic converter. I used Berryman B12 every 3rd fill up. My Check engine light went off and have no fault code

@WhipCityWrencher

8 ай бұрын

Hi Stanley, That was a Nice easy fix😊 Thanks for Sharing👍

Lucas isn't meant for idle cleaning. It's more of a fuel system and upper cylinder lubricant that prevents fouling and lubricates things. Thanks for the video though.

@WhipCityWrencher

2 жыл бұрын

You're Welcome!

I xan guarantee, cheapest Aceton will do the best in your test because not at 300C test. In engine, the temperature reaches 500c in some spots and the chemistry changes. Only PEA is effective at high temperature

@WhipCityWrencher

3 жыл бұрын

Thanks for watching and your feedback.👍🙏😊

@rondhole

3 жыл бұрын

@JD Spears Exactly, that's why we never use acetone in any part of the car. It caused micro cracked on plastics, rubber, polycarbonate, etc. Avoid any cleaner that contains acetone. Some brake cleaner has no acetone, check its msds. There is nothing really work to clean the engine fuel lines besides PEA and their derivatives that works in high temperature. 3M, Redline, BG44k, Gumout, etc. contains PEA. But, I never feel any difference putting those stuff on my cars. Most pre-2008 cars have pinging/light knocking at light load from the introduction of E10 from running slightly too lean without throwing any CEL. All cars after 2008 fits well with E10 and has no problem. My 2015 Prius has no issue with E10, and putting Redline or any additives won't hurt but hurt my wallet.

I used Lucas and it worked wonderful solved my issue id recommend too any v8 owner.

@WhipCityWrencher

Жыл бұрын

Hi Mike, Thanks for Sharing!

As far as a gas additives, I try nearly all of them,and the only one that made a different for me was Berrysman B12,and it less than 5 dollars a can at the walmart,Lucas would be my 2nd choice,the others I had no luck with.

@WhipCityWrencher

11 ай бұрын

Thanks for Sharing👍

Test would be much more accurate if deleted with gasoline per instructions. No one pours full strength cleaner into an empty gas tank. Test also doesn't include the high compression that occurs during ignition. Great video on how to open bottles.

@WhipCityWrencher

Жыл бұрын

Great suggestion!

@reeksreeks3017

Жыл бұрын

I enjoyed this video. I also think your right George. We still get some degree of how it works. Which one is your favorite cleaner?

Not sure but I would imagine the cleaners are designed to work at operating temperature. A little hotter than room temp and under pressure..

@facial210

11 ай бұрын

Awesome vid...Nice channel

The Best one is Z- max!! Hands down!! So is their oil treatment!! Plus it gave me the best gas mileage improvement!! I can average about 40mpg on the Highway in my 2017 Hyundai Elantra!!