Same here. What did you do ? Something worked for you?
@Yourmomma568
5 ай бұрын
@@rjarivi lol. I literally had to use a different chair. Mine wouldn't budge. I used a 4 pound cross peen smithing hammer, and hit it from every angle for like, 20minutes before i gave up. I used wd40, mineral oil, rubber mallets, everything I had. If it's not stuck, it works though. The other chair took me about a minute.
@rjarivi
5 ай бұрын
@@Yourmomma568 ohh.. Same case for me expect I need to try it with wd 40..
@alex-l7747
4 ай бұрын
I used a strew driver and a hammer to take off the tilt mechanism
@rjarivi
4 ай бұрын
@@alex-l7747 titl mechanism is fine and ez. We are taking about removing hydraulic from the mechanism. Update about mine. I used wd40 but I thought it was gonna work and I Recorded but it didn't. But I got a new office chair (which I returned now) but I booked a assembly for that via urban company and I asked tat person to remove and hed did used the same hammer just like me but it came off with just 2 hammering. After that I realised that I used the chair updown to ease my view but the technician did in side angle and I think when I used wd 40 it really did come off a lil bit but the thing is I had the up-down maybe thats why it kept going inside after coming off little. We need to place chair in a side angle and while hammering keep pulling it out.
@droogle1377 Жыл бұрын
Worked so well I completely broke my chair
@ulysses498910 ай бұрын
The FUCKING BASE WON'T COME OFFF
@potatochobit
4 ай бұрын
use the stairs to hold the wheel spokes
@SarahNova2 ай бұрын
Thanks for showing a more practical way to do it! The other videos said you need a pipe wrench 🙄
@kavakavayea7 ай бұрын
THANK YOU! I was stuck on this part
@jamesduckettDR Жыл бұрын
Thanks. I was trying to get the tube out of the chair base for an hour until I saw this. Held the tube, hit the base and it popped right out. Who knew?
@trotcar57 Жыл бұрын
worked like a charm! thanks.
@TheViksin10 ай бұрын
Bro, worked like a charm!!
@BigFarm_ah36512 күн бұрын
N3ext time I get a new chair I'm going to film one of these videos too
@lavender_boutique6 ай бұрын
Thank you!
@yahyaelganayni4055 Жыл бұрын
I can't do it, the base is iron I don't know what to do
@Wolfeyesi Жыл бұрын
Thank you so much I was about to cry and I asked God to help me and he showed me your video God is good
@mayne7937
9 ай бұрын
☠️☠️☠️☠️😊
@lasu7712
9 ай бұрын
Because after that your chair got its time to join God, so you asked Him to come to take it away...
@MrBurns0618
7 ай бұрын
Damn why’d you need to get the lift off so bad lol
@kflive1
2 ай бұрын
You asked god to help with an office chair, why cant you just take responsibility for yourself for once. yikes.
@hornwijaya503310 ай бұрын
Thanks so much. :) Savings me dough to get more tools, who knows good ol hammer will do the trick.
@BobbyFigliola9 ай бұрын
perfect world. new chair / look at the wheels. sit on it for a week. never seperates without a fight !!!
@eddietribaldos4408 Жыл бұрын
Ty!!
@randominionfun54333 күн бұрын
Yeah okay but when I do it….
@RandomRothbardian Жыл бұрын
Make sure your chair isn’t low quality or might explode
@lasu7712
9 ай бұрын
explode? really?
@VirDayHey
7 ай бұрын
ya those can kill 7 fatals in china due to cheap chairs@@lasu7712
@Laughing-Pixels
7 ай бұрын
@@lasu7712 Yes it can, kzread.info/dash/bejne/nGyj1suGk8TXZ7w.html
@nettik1288
5 ай бұрын
Yup 👍
@animefreak3010
2 ай бұрын
That's good to know
@CTSpeed4136 ай бұрын
Looks so easy! 😂
@ChicoCamilo-vf4eb2 ай бұрын
Base started coming off from first hit. Shit wasnt even stuck.
@breaklaw932 жыл бұрын
So easy😍😍😍
@ajitrawat937110 ай бұрын
Bhai maine aap ki trah kiya mujhe wheels base change karna tha maine 3 hathoda mara par hydrolic ka lock tut gya or wah wheels base ke sath he Nikal gya ab kya karu vo wheels base se Nikal nahi raha
@ImGhost294 ай бұрын
Def worked 😂😂
@user-bb7iq1xo1o6 ай бұрын
Lmao unless u r sitting on it for 2+ years and it is stuck together like super glue. I ttied everything. Beating on it like crazy with hammer or tried to loosen it by trying to turn it with wrench but that thing is hard stuck in my base
Пікірлер: 43
That's nice. Mine won't budge.
@rjarivi
5 ай бұрын
Same here. What did you do ? Something worked for you?
@Yourmomma568
5 ай бұрын
@@rjarivi lol. I literally had to use a different chair. Mine wouldn't budge. I used a 4 pound cross peen smithing hammer, and hit it from every angle for like, 20minutes before i gave up. I used wd40, mineral oil, rubber mallets, everything I had. If it's not stuck, it works though. The other chair took me about a minute.
@rjarivi
5 ай бұрын
@@Yourmomma568 ohh.. Same case for me expect I need to try it with wd 40..
@alex-l7747
4 ай бұрын
I used a strew driver and a hammer to take off the tilt mechanism
@rjarivi
4 ай бұрын
@@alex-l7747 titl mechanism is fine and ez. We are taking about removing hydraulic from the mechanism. Update about mine. I used wd40 but I thought it was gonna work and I Recorded but it didn't. But I got a new office chair (which I returned now) but I booked a assembly for that via urban company and I asked tat person to remove and hed did used the same hammer just like me but it came off with just 2 hammering. After that I realised that I used the chair updown to ease my view but the technician did in side angle and I think when I used wd 40 it really did come off a lil bit but the thing is I had the up-down maybe thats why it kept going inside after coming off little. We need to place chair in a side angle and while hammering keep pulling it out.
Worked so well I completely broke my chair
The FUCKING BASE WON'T COME OFFF
@potatochobit
4 ай бұрын
use the stairs to hold the wheel spokes
Thanks for showing a more practical way to do it! The other videos said you need a pipe wrench 🙄
THANK YOU! I was stuck on this part
Thanks. I was trying to get the tube out of the chair base for an hour until I saw this. Held the tube, hit the base and it popped right out. Who knew?
worked like a charm! thanks.
Bro, worked like a charm!!
N3ext time I get a new chair I'm going to film one of these videos too
Thank you!
I can't do it, the base is iron I don't know what to do
Thank you so much I was about to cry and I asked God to help me and he showed me your video God is good
@mayne7937
9 ай бұрын
☠️☠️☠️☠️😊
@lasu7712
9 ай бұрын
Because after that your chair got its time to join God, so you asked Him to come to take it away...
@MrBurns0618
7 ай бұрын
Damn why’d you need to get the lift off so bad lol
@kflive1
2 ай бұрын
You asked god to help with an office chair, why cant you just take responsibility for yourself for once. yikes.
Thanks so much. :) Savings me dough to get more tools, who knows good ol hammer will do the trick.
perfect world. new chair / look at the wheels. sit on it for a week. never seperates without a fight !!!
Ty!!
Yeah okay but when I do it….
Make sure your chair isn’t low quality or might explode
@lasu7712
9 ай бұрын
explode? really?
@VirDayHey
7 ай бұрын
ya those can kill 7 fatals in china due to cheap chairs@@lasu7712
@Laughing-Pixels
7 ай бұрын
@@lasu7712 Yes it can, kzread.info/dash/bejne/nGyj1suGk8TXZ7w.html
@nettik1288
5 ай бұрын
Yup 👍
@animefreak3010
2 ай бұрын
That's good to know
Looks so easy! 😂
Base started coming off from first hit. Shit wasnt even stuck.
So easy😍😍😍
Bhai maine aap ki trah kiya mujhe wheels base change karna tha maine 3 hathoda mara par hydrolic ka lock tut gya or wah wheels base ke sath he Nikal gya ab kya karu vo wheels base se Nikal nahi raha
Def worked 😂😂
Lmao unless u r sitting on it for 2+ years and it is stuck together like super glue. I ttied everything. Beating on it like crazy with hammer or tried to loosen it by trying to turn it with wrench but that thing is hard stuck in my base
Sawzaw it took for mine
It work's 🎉
Bullshit, too easy