How to remove a 2014-2016 Hyundai Elantra Front Bumper Cover, 1 of 3
Автокөліктер мен көлік құралдары
Have you ever wondered or needed to remove your broken, ugly front bumper off of your 2016 Hyundai Elantra, here it is! This is the first of 3 videos that will show you how.
Where to buy: bit.ly/16ElantraFrBumper
Blog available here : www.revemoto.com/blogs/revemo...
0:00 Start
0:08 Intro
0:19 Loosen the fender liner
1:00 Remove engine cover/splash shield
1:19 Remove the bolt holding the bumper to the fender
1:58 Repeat on the other side
3:00 Remove the radiator cover
4:30 Pop the bumper off the brackets
5:06 Outro
It's a very easy process and we promise that anyone can do it.
TOOLS NEEDED: Philips screwdriver, wrench, or socket wrench with 10mm socket.
INSTRUCTIONS:
It's normally best to start from the bottom of the bumper and work your way up. This way the bumper won't fall on your unsuspecting face. It can happen. There are two plastic push pins but of the Philips screw variety. Just unscrew the center (:28), you may have to hold the exterior rim of the clip with your finger but instead of popping this out, you unscrew it. This particular customer was missing the under-car shield but there are normally two 10mm bolts at the center that attach the shield to the bumper.
Make your way to the fender liner on any side, we started with the driver side. Peel the fender liner away and there will be a 10mm screw that connects the fender and the bumper together. Remove this screw then do the same on the opposite side. Next, make your way to the plastic push pins on the engine cover or top of the bumper. The key is to wedge your flat-head underneath the button and pry it up or use a panel clip pliers. You're all done with what secures the bumper to the car, just pull the corners from the fenders gently to remove the bumper. Make sure you don't let the bumper fall if you have fog lights. This vehicle did not have any.
That is all! You did it, it's easy. If you need to install the bumper just work your way backward from the removal or check out the video below or at the end of this video. It's a 3 part series, removal, bumper accessories, and finally, the bumper install. Thanks for watching!
Source: www.revemoto.com
Follow Us on
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
________________________________________________________
#HyundaiElantra #revemoto #paintedautoparts #Elantra #highquality #DIY #HowTo
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 72
Thank you for stopping by and watching our video. We hope it helped you out. If you need a brand new painted bumper, Where to buy: bit.ly/16ElantraFrBumper If you need any other painted car parts, Visit us at : www.revemoto.com
The tutorial is very much appreciated, I am currently doing this exact project and wouldn't have succeeded without this.
@ReveMoto
2 жыл бұрын
Thank you for those kinds words. Glad it helped and thank you for watching!
DUDE, THANK YOU!! REPLACING MINE THIS MONTH FINALLY!!
@ReveMoto
3 жыл бұрын
Thank you for watching. I will drop the link for our bumper below. We also have 2 other videos on installing the bumper and changing out the grilles. Take care! bit.ly/16ElantraFrBumper
This was so helpful. Very well explained and very easy to see the stuff we need to reach. Thanks!
@ReveMoto
Жыл бұрын
So glad to hear it and thank you for watching. Please subscribe if you haven't, it helps us a ton! 😃
Thank you, appreciate your help!
Thanks, I need to add some aftermarket fog lights and this video is a huge help.
@ReveMoto
2 жыл бұрын
Glad it helped. The fog lights give it such a cool look!
Looks pretty easy! Thanks for the vid!
@ReveMoto
3 жыл бұрын
It is! Anyone can do this. Thanks for watching.
Thank you so much for this video, brother!
@ReveMoto
4 жыл бұрын
Glad it was helpful!
Thank you brotherin
Thanks,very helpful and simple really!!
@ReveMoto
4 жыл бұрын
Glad you think so!
Thank you. Will subscribe.
@ReveMoto
3 жыл бұрын
Thank you, it really means a lot!
Thank u a ton, I'ma go fix my brothers front bumper, he just bought and scraped it really bad
@ReveMoto
4 жыл бұрын
Thank you! Anyone can do this job with a few tools determination. Good luck.
Good stuff 👍🏻
@ReveMoto
4 жыл бұрын
Thank you for the support!
Just the level of detail I needed. Thanks
@ReveMoto
9 ай бұрын
Awesome! So glad it helped. Go to www.ReveMoto.com if you need any parts
thank you great video
@ReveMoto
2 жыл бұрын
Appreciate it good sir. If you need the bumper you can get it at www.ReveMoto.com. Tell all your friend and family we would really appreciate it. Let me know if you have any questions
Thanks!
@ReveMoto
3 жыл бұрын
Thank you for watching!
Thank you
@ReveMoto
Жыл бұрын
You're welcome, Jerry - glad it was helpful! If you need the bumper replacement, we sell them pre-painted so please check us out! bit.ly/16ElantraFrBumper
Merci beaucoup!
@ReveMoto
2 жыл бұрын
avec plaisir
Worth a thumbs up… since I have a 2016 Elantra that I’m getting ready to replace the front and rear bumper covers! Door dashing all winter in Alaska has left its signature on the car and I want to fix it myself. Question- do you have a list or link of the body panel clips (sizes) and locations, I’ve already bought one universal kit(?), I can now fix a bunch of other kinds of cars, I just need some stuff for my Elantra now! Thanks for the video, I’ll be watching your channel religiously
@ReveMoto
Жыл бұрын
Thanks Robert! For body parts go to www.Revemoto.com. The universal clip kit is what I would of recommended. The bolts I would just get 10mm at your local auto store or if you want the cheaper online like eBay. Other than that I am not sure about the other misc clips but I would just get those unique ones at the dealership
Hey man what is the part with the Hyundai emblem attatched to the bumper called? It was missing when I purchase a new bumper, so I need to buy a new one but don’t know what it’s called. Thank you 🙏🏾
@ReveMoto
27 күн бұрын
Oh just tell them upper grille or contact www.ReveMoto.com. They can help
I need to replace the plastic piece you were unscrewing in the beginning do you know the exact name of it / part number?
@ReveMoto
3 жыл бұрын
Hello Jon! I believe that is referred to as the engine splash shield, or lower engine cover. Thank you for watching!
I'm trying to replace a fog light can I just do one side of the bumper do I have to hook pull the whole bumper off to change the assembly
@ReveMoto
Жыл бұрын
Hi Kenneth! No you don’t have to take the whole bumper off. It will just be easier since you can put the bumper on a stand. The way I will tell you you have to be under the car. So you will have to take the fender liner off not the whole thing, but just underneath the bumper. Locate the fog light and it should be 2-3 screws you have to take off and unplug harness. Then you can just put the new one on doing the reverse of what you just did.
@BleedCubbieBlue77
Жыл бұрын
@@ReveMoto thanks I'll get that a try
@ReveMoto
Жыл бұрын
@@BleedCubbieBlue77 Awesome let me know if you run into any issues
@BleedCubbieBlue77
Жыл бұрын
@@ReveMoto for the life me googled can't find what size screw is needed to fasten fog light assembly
Can you please do 2018 front bumper with LED lights?
@ReveMoto
3 жыл бұрын
If we can get in the door, we'd love to do it!
Do I need to do anything extra when I have fog lights?
@ReveMoto
2 жыл бұрын
Hello, and great question. The covers pretty much work the same way as the fog light brackets. So, you just have to unplug the fog lights and disconnect the brackets or transfer them to the new bumper. It's usually a couple screws on the brackets. Thank you for watching!
Would it required two people putting it back on
@ReveMoto
2 жыл бұрын
Having an extra person always helps but it's not required. If you can clip on under the headlights (start with the middle, then to the sides) it will usually stay put. Then just insert the top bolts/clips to hold the bumper. Then snap it in under the fender and start inserting the bolts/clips. Thank you for watching!
Can somebody please help me. I found a cheap 2015 front bumper but I have a 2013. Will it fit.
@ReveMoto
5 ай бұрын
If you have the Elantra GT (Hatchback) then yes. But, if you have the Elantra (Sedan) then no. If you want it pre-painted, check out revemoto.com
@Pesopalabra
5 ай бұрын
@@ReveMoto Thanks for your help my friend, would the hood of the 2015 work on the 2013 thought ?
@ReveMoto
5 ай бұрын
@@Pesopalabra Yes it wll
Is that pre-installed wiring for fog lights?
@evangallant2000
2 жыл бұрын
I have been wondering if these cars come with pre-installed wiring even if they came without fog lights from the factory
@ReveMoto
2 жыл бұрын
Hello! Yes, a lot of vehicles will come with the wires on the harness even if you did not buy the car with those options. Please double check with the Elantra forums but they are most like for the fog lights. You'll just need to get the lights, brackets and bezel for the fog lights. It's a pretty easy install. Thank you for watching!
How much does it cost to replace
@ReveMoto
2 жыл бұрын
You can follow the link here for the part. bit.ly/16ElantraFrBumper The labor to replace a part is usually around $150 or $50-90 an hour for 2-3 hours depending on a lot, but that's the average. Thank you for watching!
How much it cost if bring my car to you to replace?
@ReveMoto
3 жыл бұрын
Hello Thomas. We are located in Houston, Texas. If you are in town, just give us a call. A standard replacement is around $150 and up, depending on the severity of the accident and the technician doing the labor. Please let us know if you have any more questions. If you are looking for a bumper, check the links above.
@thomasbruno364
3 жыл бұрын
@@ReveMotolol, but I am in LA, but I would like to move to Houston. Let’s see though
@ReveMoto
3 жыл бұрын
@@thomasbruno364 Everyone's welcomed in Houston. We'll be here!
It's called a ( front ) fascia, not a bumper.
@ReveMoto
Жыл бұрын
Hi Clinton, in the United States that part is called the bumper.
@edenc.m4576
5 ай бұрын
Yeah the U.S calls these a front bumper 😂
@clintonwalls3642
5 ай бұрын
@@ReveMoto I worked in a sequencing house for 16 years sequencing front and rear FASCIAS not bumpers for General Motors.
@throwaway5926
4 ай бұрын
@@clintonwalls3642 No one asked and no one cares. This isn’t your GM job and it isn’t a GM car either. Everyone understood what he meant…everyone except you, apparently.
@clintonwalls3642
4 ай бұрын
@@throwaway5926 and bumpers were made from metal little boy. Chrome bumpers!!!