Hahaha, he sounds like "Sauhl GoodMan", lol

@jenshansen6731

3 жыл бұрын

You are so right. I think he is in Walter’s house changing the keys.

@robertlee4172

2 жыл бұрын

Crispin Glover from River's Edge. kzread.info/dash/bejne/nJqIuNdvZs2tldY.html

You, Sir, are a king among key men

Your video was very helpful. Thank you so much for posting this 😄

Thank you Jimmy McGill

That's a helpful video guide. I guess you could use your old keys back if you want by rekeying again from the current new keys. Do I understand right?

You are great man🙂🙂

Excellent, thanks very much

I just switched my existing powerbolt and the keyed knob to a Powerbolt2.0 electronic lock, and a keyed lever within minutes after reading the instructions, programmed it to our needs, and WITHIN THE BLINK OF AN EYE the locks were also re-keyed, no need to get new keys cut! I LOVE Weiser locks, everything is so easy....though, I strongly recommend to read the instructions, or watch the WEISER instructional videos BEFORE you start the whole process, including installing and programming. It's a breeze then. The old locks were then re-keyed to the 'new' keys that came with the Powerbolt2.0, and the whole old set with 2 brand new keys is ready to sell.

@kimghanson

Жыл бұрын

Interesting. I just tried my old keys in the new locks and they did not fit. And yes of course they were both Weiser. Perhaps 45 years is too long to expect compatibility.

wow - that was easy!

You of course realize we could not see the orientation of the rekeying tool in its slot. Also, will this work on a lock not yet installed in the door?

Thank you for the demotration

Thks for this bud

Thanks.

not completed, you did not say that after rekeying, the old key still works or not?

@clarelewis2628

8 ай бұрын

It should be obvious that after rekeying, the old key would not work

What if you don’t have your old key? I thought that was the point of this smart key. Any suggestions ?😊

I have 3 additional smart keys that I want to give to my family. Will each rekeying make the previous no good??

@ChrisMak1

4 жыл бұрын

If the keys are each cut differently, then only the last one you've programmed it to will work.

Can I make multiple duplicates for myself Using the current key ?

Now I have two different keys that don't work. How do I fix that

At precisely what point is the SmartKey tool removed?

Can you rekey a weiser lock with a key from a different company?

Where do I buy that tool?

@kimghanson

Жыл бұрын

It comes with the lock. If your lock does not have the little hole for the keying tool the process will not work. If you somehow lost the tool, you may have to buy the rekey kit. It has the tool and 6 keys. This is perfect for landlords so they can rekey for cheap instead of buying new locks or hiring a locksmith.

It takes the Weiser WR3 key.

So how many keys can it be re keyed at once or is it one time only

@clarelewis2628

8 ай бұрын

Unlimited. But you would just re-keyonce & then get copies of that new key made for multiple users. But later if you needed to "change the lock" then it can be rekeyed again as many times as needed

can a locksmith re-key a non-smartKeyWeiser lock _without_ a key? My mother lost her key and has just been using the keypad to gain entry. This particular Weiser lock is about 20yrs old. Or would the locksmith just replace the lock...

@pineappleroad

3 жыл бұрын

It would be possible to do so, for a non smartkey lock, to rekey it, the lock would have to be disassembled regardless of if you had the key And i think it would actually be easier and quicker to disassemble it without using the key (upon request i will explain why, but be warned, unless you are familiar with the insides of locks then it will sound alien to you) Although I suppose it would depend on the locksmith as to if they would replace it, or rekey it

Maybe this is a stupid question, but what if you don't have a new key? Do you go to a key cutter and ask them to cut a random sequenced key as your new key?

@timtim2500

4 жыл бұрын

not stupid at all, I was wondering the same... I have only 1 old key, that I do NOT want to use... and the original weiser key (that I want to replace).

@jore4371

4 жыл бұрын

New set of keys comes with the tool

@wkozlowski

4 жыл бұрын

Not a stupid question. You can buy a SmartKey re-keying kit, which contains new keys, from most hardware stores.

@cathym4708

10 ай бұрын

This is the obvious question: where do you get the new key from.

Thanks! Btw has anyone ever told you, you sound like Badger from Breaking Bad?

So what dodo if you screw up and now bolt keys don’t work?

@pineappleroad

3 жыл бұрын

If that happens chances are the cylinder became misprogrammed, there is a video somewhere on KZread showing how to recover a misprogrammed cylinder

@douzaine12

2 жыл бұрын

kzread.info/dash/bejne/p2uixchyibipo7w.html

He does it different than the directions: on directions it’s current key 90 degrees to clockwise. Use tool in little hole, pull key out, put new kw1 in, turn counter clockwise 180 degrees then 90 degrees clockwise. Pull out key, done……. If you brick it, making no keys work, any half asses lock smith should be able to reset it for you. Even Home Depot can.

I guess this is not recommended for a rental appartment? If the renter decide to change the key so the owner cannot access anymore..

@jmbstat

3 жыл бұрын

thats when u change it from a weiser lock to something else lol

You can't use any key you want, it has to be a Weiser key.

Only give a 1/4 turn

What kind of garbage system is this? Mine totally stopped turning. Doing this did nothing. Snapped the key trying to do this. One year, maybe 30 uses and the lock is totally useless. Next time avoid chinese import locks and buy a proper brand that doesn't "forget" how to work.

@pineappleroad

3 жыл бұрын

Thankfully these self rekeying locks don’t exist where i live (although there again most doors where i live aren’t compatible with deadbolts)

@rgLuna

2 жыл бұрын

It's not Chinese. It's a US based company situated in California

Your video was very irritating because your hand is abruptly flying all over the place. I found it unsettling to watch so I found a different video. If you were to slow those hand down and not be sp spastic with them itd probable be a good video

@joef1551

2 жыл бұрын

Maybe you should just watch another video and don’t leave a stupid comment if you don’t like it don’t watch it

@BobBlair99

2 жыл бұрын

@@joef1551 My comment was meant for an adult, of which I thought you were. It was constructive criticism put respectfully. Your response however was not respectful. Its the unreachable ones who have such a hard time getting along. Don't worry, I did find another video. And it took you this long to see my comment. You're just like a lot of other creators who don't give a crap about its viewers. The best of luck to you sir.

@joef1551

2 жыл бұрын

@@BobBlair99 First off I can tell you think that I’m the one who posted this video. I am not, I’m just commenting on what you wrote. I commented two months later because that’s when I seen your reply Didn’t your mother ever tell you if you have nothing nice to say don’t say anything at all. Cheers

@BobBlair99

2 жыл бұрын

@@joef1551 I'll give you that

@Mafioso1731

Жыл бұрын

I think it was just you who find it distracting 😆

3 min is unnecessary