If you have any helpful tricks or tips, comment them below.

Great video man 💯👍

Nice detailed video my friend!

@TALENTLESSOFFROAD

3 жыл бұрын

Thank you!

Cat is going to be down a bit longer than planned, but new upgrades will make it worth the wait.

Dude I just subscribed ...thought I was already ...good job brother.

@TALENTLESSOFFROAD

3 жыл бұрын

Better late then never, lol.

Thanks for the video. Gonna help me out a lot

Thanks for this video. This is exactly what I needed to know

@TALENTLESSOFFROAD

3 жыл бұрын

Hope it helped.

Awesome video man. Made my life easy rebuilding mine. 👍🏻

I don't have a clutch, but is nice to know how to rebuild one.

@TALENTLESSOFFROAD

3 жыл бұрын

It will come in handy when you buy a RS1 or Turbo S!

Good information

@TALENTLESSOFFROAD

3 жыл бұрын

Hopefully it helps someone.

Any trick to getting the center of the helix to line up so it's even all the way around and centered on the shaft?

@TALENTLESSOFFROAD

Жыл бұрын

Tap it lightly until it's close, than put the inner sheave on first. Should go right on. Then put your outer on, in the correct orientation.

So what do you do if you take the secondary apart without marking them not realizing they were balanced?

@TALENTLESSOFFROAD

Жыл бұрын

If you haven't put them back together yet. Line up the marks left by the belt removal tool on the inner sheave to the holes for the tool on the outer sheave. Should line you back up.

To Be Fairrrrr

My belt is rubbing on the edge of the bearing towards the drivers side. Distance between primary and secondary spindles are 10.5 inches bang on

@TALENTLESSOFFROAD

Жыл бұрын

The center to center distance may be what they say it should be but that doesn't mean the shafts are actually parallel.

@patdudley7635

Жыл бұрын

@@TALENTLESSOFFROAD Found the issue. The gearbox was too far to the passenger side by 4mm. Moved it back now all good

Hey where did you get that aping compressor ??

@matinscootsSD

2 жыл бұрын

Spring

@TALENTLESSOFFROAD

2 жыл бұрын

Team Clutch Compression Tool from Holz racing products.

What happens if those sliders break while out on a ride?

@TALENTLESSOFFROAD

2 жыл бұрын

It won't shift properly and may stick a bit.