HOW TO PROPERLY TIME A TOYOTA CELICA: Timing a 1ZZ Toyota Engine
This video gives a brief description of how to change/install the timing chain and make sure a 1ZZ Toyota engine is timed correctly.
Жүктеу.....
Пікірлер: 10
@GB-nu8fq2 жыл бұрын
So I noticed in your video your dots didn't line up on your camshaft sprockets like you said they should or did I not see it right? Did it run okay?
@ReedRacing9J
2 жыл бұрын
If I remember right, the motor I was using in this video was one I had pulled out and replaced because it was blown up when I bought the car so I couldn't get one of the cams to turn where it needed to be. The dots should line up(they may be off just a hair), but get them as close as possible. I've done 3 of these engines this way. All are still going strong. The one I drive daily has almost 100k on it since I've done the chain.
@GB-nu8fq
2 жыл бұрын
@@ReedRacing9J okay thanks. I'm about to tear the head off 01 Celica. Thanks for the vid
@dannye45623 жыл бұрын
Yeah I messed this part up and dropped valves😂
@ReedRacing9J
3 жыл бұрын
Happens to the best of us
@dannye4562
3 жыл бұрын
Reed Racing just got it timed up. Now time to put the rest on and see how it goes
@dannye4562
3 жыл бұрын
Reed Racing I got it timed. How loose was your chain with the tensioner out. I want to rotate the engine 4 times to make sure I did it right.
@ReedRacing9J
3 жыл бұрын
@@dannye4562 with the tensioner out, it will be super loose. Should be pretty tight with the tensioner in it.
@Thecardoctor3652 жыл бұрын
could i do this without pulling the motor?
@ReedRacing9J
2 жыл бұрын
Yes. But there is very little room and getting the timing cover off and on without damage in that space is very difficult
Пікірлер: 10
So I noticed in your video your dots didn't line up on your camshaft sprockets like you said they should or did I not see it right? Did it run okay?
@ReedRacing9J
2 жыл бұрын
If I remember right, the motor I was using in this video was one I had pulled out and replaced because it was blown up when I bought the car so I couldn't get one of the cams to turn where it needed to be. The dots should line up(they may be off just a hair), but get them as close as possible. I've done 3 of these engines this way. All are still going strong. The one I drive daily has almost 100k on it since I've done the chain.
@GB-nu8fq
2 жыл бұрын
@@ReedRacing9J okay thanks. I'm about to tear the head off 01 Celica. Thanks for the vid
Yeah I messed this part up and dropped valves😂
@ReedRacing9J
3 жыл бұрын
Happens to the best of us
@dannye4562
3 жыл бұрын
Reed Racing just got it timed up. Now time to put the rest on and see how it goes
@dannye4562
3 жыл бұрын
Reed Racing I got it timed. How loose was your chain with the tensioner out. I want to rotate the engine 4 times to make sure I did it right.
@ReedRacing9J
3 жыл бұрын
@@dannye4562 with the tensioner out, it will be super loose. Should be pretty tight with the tensioner in it.
could i do this without pulling the motor?
@ReedRacing9J
2 жыл бұрын
Yes. But there is very little room and getting the timing cover off and on without damage in that space is very difficult