Keep in mind Screen printing the image she did would be labor intensive for small runs.. This job can be done and paid for before the art could be separated much less burn all the screens to screen print it. DTG is very good at doing full color and small to moderate sized jobs. These tend to be higher profit jobs do to the lower qty. For us we are able to have a large selection of stock designs that we can print on demand for wholesale customers allowing them to order restocks and take custom garment color orders without setup fees etc. You want to add a name to a shirt? Open the job in Garment Creator (Epson's included software) and type name and print. Have a rush order with 24 adults shirt and 4 toddlers.. No problem just run the adults then change to the smaller platen, resize the adult print for the toddler in the software and hit print... No other setup required.. In our production one person can pretreat, print and fold so after you dry the last shirt just fold it and job done. Also keep in mind as you grow one operator could pretreat then fold while another could run 4-5 printers at once all doing different prints if needed. You can also update to conveyer dryers instead of presses as you grow... Like always it all about your market and level of comfort and available time to learn a new craft. That being said all printing methods require allot of learning to really get your systems dialed in. If you are new make sure you have the time to make the sales and learn the printing vs making the sales and outsource your printing. (as with all printing the equipment is only part of it. The process of printing is an ongoing lesson that require constant evaluation and improvements.) *Always get samples of DTG printers work before committing on a contract printer... DTG has a very defined place as does screen printing... We started DTG about 3 years ago and purchased from Mylaya at ITSupplies. We could not have been more pleased with the service and commitment from them!

Very nice set up! Great video and very clear description on the complete process.

@ITSuppliesINC

2 жыл бұрын

Thank you kindly! Let us know if there are any questions we can answer for you. Happy to assist.

She's so cute! And I love I only had to speed her up to 1.25. Sometimes I have to go to 2!!! Good info!

@ITSuppliesINC

3 жыл бұрын

Thanks Lisa, let us know if you have any video suggestions so we can better assist you and others ! :)

Love our F2000 & F2100. We got the F2000 from IT Supplies. Over 50,000 prints on it & counting!! Everyone at IT Supplies is so friendly and easy to work with! Definitely recommend them.

Thank you for this video, it helps everyone a lot. You are wonderful !

Great explanation. Thanks

@ITSuppliesINC

3 жыл бұрын

Glad it was helpful!

Great video, Thanks

@ITSuppliesINC

Жыл бұрын

Thank you, we appreciate the feedback!

Hi, what is the average cost of ink for say around 10*12 inch multicolor design on a dark garment

whats the largest size shirt it prints on ?

Thanks for the video! Great quality. Where do you buy the computer stand and the stand for the pre treator?

Great Job

@ITSuppliesINC

3 жыл бұрын

Thanks, let us know if you have any video suggestions to assist you and others :)

Can you show a video printing on a sweatshirt?

Great video, thanks so much. I just reviewed my Epson F2100 today. What do you have your computer setting on. I would love to find something similar to set my laptop on while using the printer.

@ITSuppliesINC

3 жыл бұрын

Hi Dale, I normally operate on level 3 or 4 depending on the image and the garment it is going on. It is all trial and error. The best way to get the best image quality always starts with your graphics, having the resolution at 300dpi or higher, great quality shirts and workflow. You can always call into or call center for further assistance 1-847-394-9573

She so cool 😎

What is the size of the design?

How does the ink/surface of the printed artwork feel to the touch? I always prefer the "soft feel" style where you can barely feel the artwork on the t-shirt. Can this printer print "soft feel" or is the artwork going to feel thick and plasticy like an an iron transfer? Thanks!

@ITSuppliesINC

3 жыл бұрын

It depends on what is used to cure the garment. If you use a Teflon sheet, it can give a sheen and feel more like screen print. If you use a silicone parchment sheet for curing, it would feel soft to the touch with the accurate time, curing heat temperature and pressure. The pressure you use when curing can also impact the feel - tunnel dryer with no touch, or heavy pressure when using a clamshell type press. If you have any questions give us a call 1-800-771-9665 and ask for a DTG representative!

How are you able to connect to the computer? USB cords will not work for my f2100 printer

@ITSuppliesINC

2 жыл бұрын

HI Brandon, thank you for your question. If it's not working, you could connect to your network or try a different USB cord. The cord could be faulty.

Can you use a conveyor belt like the one you use for screen printing instead of the heat press?

@ITSuppliesINC

3 жыл бұрын

Thank you for your comment, Jesse. Yes, you can use a conveyor dryer as opposed to a heat press. The conveyor must be forced air and capable of curing DTG inks. The hand on the shirt will be different, however, because the conveyor dryer will not press down the fibers and embed the ink.

Could you tell more information about the red machine and who I can buy it, a link will be appreciated , please.

@ITSuppliesINC

3 жыл бұрын

Hi, the red machine is a pretreater called the Lawson AE Zoom, you can purchase from us. Here is the link www.itsupplies.com/Lawson-Zoom-AE-1620-Pretreatment-Sprayer-p/715-330-2e-ea.htm

HI THERE WHAT WOULD YOU RECOMMEND FOR PRINTING SETTINGS TO GET THE BEST QUALITY POSSIBLE? I AM HAVING TROUBLE WITH MINE :(

@ITSuppliesINC

Жыл бұрын

We'd like to connect with you to help you with your settings. Please reach out to our info@itsupplies.com and ask for a textile specialist. We can get help get you back on track :)

i have a question you might be able to answer. On the front of the f2100/f2000 ink cartridges they have the date and under the date they usually have 2 letters like mi or me or ml MK etc.. white and cmyk inks all have 2 letters but sometimes one yellow will say ME and another yellow cartridge will say MF .... i am so clueless on what it means and it is becoming a peeve. i just want to make sure the inks are not fake lol

@ITSuppliesINC

4 жыл бұрын

The best way to tell if you're buying Genuine EPSON OEM inks is to make sure that the re-seller you're buying from is Epson Authorized Dealer (I've included a link below to check.) You can check to see if they are on the epson.com website. There's a high res photo on the white ink if you check out our website linked below, the cartridge will look like this. Epson's stock photo does have WH in large block text and EPSON in block lettering at the top of the cartridge. Hope this helps! www.itsupplies.com/Epson-DTG-Ink-Cartridges-s/1509.htm epson.com/epson-technology-center#centers

@unklereggiezKITCHeN

4 жыл бұрын

@@ITSuppliesINC Great video and TY!! Question, I'm having difficulty printing consistent high resolution shirts. I've discovered using level 6 Quality is not always NOT the answer, and I just want to get to a point where I'm consistent when printing so I'm not wasting ink, time or product. ny suggestions you have would be greatly appreciated. You're video was extremely helpful vintageprints1976@gmail.com

@ITSuppliesINC

4 жыл бұрын

@@unklereggiezKITCHeN ​There are a few different variables that could be the issue. The brand of shirt, pre-treat process or the print file itself. You can call 1-800-771-9665 and speak with one of our textile representatives or technicians for further assistance. We are happy to help!

I'm having big, annoying problems with this printer. Almost every time I put a t-shirt in it, it breaks off the print and reports the error "An obstacle is in the way" (just in German). I have 3 different plate sizes so it's not that, I always change them for bigger or smaller shirts. When I start printing it breaks off 5-10 times and I try to fix the shirt, adjust it, pull here and there until the printer finally prints. What could be the reason for that?

@ITSuppliesINC

3 жыл бұрын

Reach out to Epson support. They should be able to help. www.epson.eu/support

Question should we turn off the printer or leave it on if we’re not printing daily ?

@ITSuppliesINC

Жыл бұрын

Hi Rise Gaming, thank you for your question. You shouldn’t keep turning a printer on and off because it: Negatively affects the inner workings of the print system - creating more opportunities for malfunction. Increases the likelihood of having to clean (or replace) the print heads sooner rather than later. Wastes ink because each time you start up your printer, the print heads are forced to run through their complete cycle in preparation for printing. It’s generally a good idea to leave your printer on, even when you have no intention of printing. Shut your printer on and off frequently, and you end up mucking up the print system-which you’ll have to clean, wasting ink in the process.

@KtuluLeaderRise

Жыл бұрын

@@ITSuppliesINC even if we don’t use it everyday? Would it not clog the print head ?

@ITSuppliesINC

Жыл бұрын

@@KtuluLeaderRise Hi Rise Gaming, to keep your printer lasting longer, we recommend leaving your printer on. If it is off for a long period of time or if you turn it on and off again regularly, the printhead inside the printer will dry out faster. When you leave it on, you may hear the printer start up every once in a while and begin to calibrate. For healthier print heads and more efficient ink consumption, it's better to leave your printer on. Most printers have a “sleep mode” function that kicks in after the printer has been idle for about 15 minutes, which helps conserve power. If you do need to turn your printer off, make sure to shut it down properly using the power button on the front of the machine. Clear out any pending print jobs from your printer queue and check that the cartridges have returned to their resting position inside the printer prior to shut down. If you unplug the printer from the wall and it hasn’t been shut down properly, you could permanently damage your machine.

what's the maximum printable size for this unit on the garment?

@ITSuppliesINC

2 жыл бұрын

Hi B. Swain, the printer comes with a Medium platen (14"x16") an optional large platen is sold that brings the maximum printing area to 16” x 20” if purchased separately. If you have any questions, give us a call at 1-800-771-9665 and ask for a DTG rep!

What are you pre-treating shirt with? And why is it done?

@ITSuppliesINC

2 жыл бұрын

Hi Wendi, Thanks for your comment. The shirt is being pretreated with a machine called the Lawson AE Zoom www.itsupplies.com/Lawson-Zoom-AE-1620-Pretreatment-Sprayer-p/715-330-2e.htm & Epson pretreat solution www.itsupplies.com/Epson-Garment-Pretreatment-Fluid-C13T43R100-p/c13t43r100.htm The reason this is done is to give the white ink something to attach to in the printing process. For example, if you are trying to print yellow on a black shirt, you won't be able to see it. But if you lay down a layer of white ink and then lay down yellow, you will be able to see how beautiful and vibrant the yellow is. Let us know if you have any additional questions. We'd be happy to assist you.

What is your cost per shirt and what would it sell for retail? Just wondering how long it would take to get your ROI. Between the heat press, printer, computer and consumables, it might take a while if you’re printing 4 shirts per hour.

@RobbieRobski

3 жыл бұрын

All I know is those printers are around 18K. I'd imagine they charge at least 30 a shirt.

@ITSuppliesINC

3 жыл бұрын

Thanks for your comment, those are great questions. We go over ROI with customer all the time. The industry standard is about 20-25 dark shirts per hour and 25-30 light garments (not using white ink as a base). Now this is also based off the operator and other variables but we are here to teach you work flow process to efficiently get the job done. If you are interested in speaking to a dedicated Textile Print Specialist - we would be happy to assist you. You can call 847-394-9573 or email us at info@itsupplies.com

Does all of that equipment come in one

@ITSuppliesINC

3 жыл бұрын

No, they're sold separately.

I have a question, what kind of heat press/ cure press is that? I found the Lawson pretreat systems, I also found the printer I’m just having a hard time finding that press

@ITSuppliesINC

2 жыл бұрын

Hi Shawn, thanks for reaching out! The Heat Press we used in this video is called the "Geo Knight DK20A Digital Knight 16x20 AUTO Clamshell", you can find it on our website, as well as many other types of heat presses depending on your needs. If you have any other questions, give us a call at 1-800-771-9665! www.itsupplies.com/Geo-Knight-Digital-Knight-16x20-AUTO-Clamshell-p/dk20a.htm

@ShawnSarbacker

2 жыл бұрын

@@ITSuppliesINC fantastic! I’m actually looking to start a clothing store and do everything in house! I will give you all a call on my lunch break 😁

@ITSuppliesINC

2 жыл бұрын

@@ShawnSarbacker Awesome, we look forward to hearing from you!

@ShawnSarbacker

2 жыл бұрын

I tried calling just were in different time zones! I just have a question, if I were to purchase all 3 pieces of equipment from you guys, the pretreatment, the press and the printer would I be able to get a discount? And also does the f2100 accept algae ink? I’m looking to use more sustainable materials

@ITSuppliesINC

2 жыл бұрын

@@ShawnSarbacker Hi Shawn, sorry you couldn't reach us. Our phone lines operate between the hours of 8am - 5pm CST and our number is 1-800-771-9665. The printer is designed to only work with genuine OEM Epson inks. Using anything else can ruin the printer and void the manufacturer warranty.

What is all the equipment/material being used in the video??? Asking because I wanna start a t-shirt business as well

@ITSuppliesINC

3 жыл бұрын

EPSON SureColor F2100 T-Shirt Printer, Heatpress, Lawson Pre-Treatment Machine. If you'd like more information on setting up your T-shirt business give us a call at 1-800-771-9665.

@mrdemare777

3 жыл бұрын

@@ITSuppliesINC how much all this equipment cost altogether

@ITSuppliesINC

3 жыл бұрын

@@mrdemare777 It depends on which options you're selecting to set up your DTG Solution, prices of heat presses vary based on your needs. We'd be glad to help please call us at 1-800-771-9665.

@mrdemare777

3 жыл бұрын

@@ITSuppliesINC will definitely be calling you all

@rogerpassie7832

3 жыл бұрын

@@ITSuppliesINC Morning I want to buy a machine

Do u allow your pre treatment to dry before u press it or is it straight to press while it is wet ?

@ITSuppliesINC

Жыл бұрын

Hello Philip, the garment must be totally dry prior to printing. You can fix the pretreat with a heat press at 330 degrees for 45-90 sec at a PSI of 9.

@philiprussell7557

Жыл бұрын

@@ITSuppliesINC so thats 9lbs of psi for 45-90 seconds

@philiprussell7557

Жыл бұрын

@@ITSuppliesINC we have the same machine but i do not have a pretreat booth just a gun so im trying to adjust to how much pretreatment i should lay down along with how to get it to the point where my machines prints will pop like yours thank you btw for your reply i appreciate it

I'd be pretty OCD about the alignment because you end up having to just align the shirt and hope it's exactly in the middle.

@ITSuppliesINC

3 жыл бұрын

Totally understandable, but once you get the technique down, it like second nature and you don' worry about it because it will be spot on. We use the arrows at the top and bottom of the machine to guide us. You can do it :)

How much does the machine cost in total

@ITSuppliesINC

3 жыл бұрын

Costs differ depending on the rebates each month. Check out our site for more details www.itsupplies.com/Epson-SureColor-F2100W-DTG-Printer-p/scf2100we.htm

Is the software Mac compatible?

@ITSuppliesINC

2 жыл бұрын

Hey Brian, Thanks for your question. It sure is Mac & PC Compatible. Let us know if we can be of further assistance :)

What is the price of this machine?

@melissacarter9166

3 жыл бұрын

Hi Ankit, the retail price of this printer is $16,995, at IT Supplies we currently have it on sale for $13,995. www.itsupplies.com/Epson-SureColor-F2100W-DTG-Printer-p/scf2100we.htm

@Naturexl

3 жыл бұрын

Ankit Agarwala somewhere over $13,000

@ITSuppliesINC

2 жыл бұрын

Hi Ankit, the list price for the Epson SureColor F2100 is $16,995. We have it on sale, with $2,000 off for a price of $14,995. Check it out on our website, www.itsupplies.com/Epson-SureColor-F2100W-DTG-Printer-p/scf2100we.htm

Price

@ITSuppliesINC

2 жыл бұрын

Hi Aaqib, pricing is different in each country. If you are a US resident, please click this link to get pricing www.itsupplies.com/Epson-SureColor-F2100W-DTG-Printer-p/scf2100we.htm

330°F or 330 °C?

@HockeyFightFair

3 жыл бұрын

Farenheit ... 330 C would burn everything

@akemimcflyclips7130

3 жыл бұрын

@@HockeyFightFair 330 °C if you want to melt your tshirt

@Tankwiper

2 жыл бұрын

Around 170 C

@ITSuppliesINC

2 жыл бұрын

Hi Stalin, thank you for your comment. The answer is 330 degrees Fahrenheit.

too many step too much time

@ITSuppliesINC

2 жыл бұрын

Hi Sin Car, when making one shirt, we agree it takes time. But if you are running orders for your business, it doesn't take as much time as you think as all the equipment would be running and doing something to increase your output.

What amount of pressure you use to the heatpress to press the shirt before and after the pretreatment?

@ITSuppliesINC

Жыл бұрын

Hi Dimitris, thank you for your question. Pressing prior to pretreat is for laying down the fibers of the shirt. You can do this with medium pressure for a couple seconds to iron out the shirt. We then follow EPSON's recommendations of 45-90 sec at a PSI of 9 for drying pretreat. You want to be sure the garment is totally dry prior to printing.