How To Pour Concrete Around a Pool Using Z Poolforms (Easy Forming System)
Тәжірибелік нұсқаулар және стиль
#EverythingAboutConcrete #MikeDayConcrete #Zpoolform
In this video I'm forming, pouring, and finishing a 1000 square foot concrete pool deck.
We're using Z poolforms to form the inside pool coping. This forming system is the easiest I have used to form copings.
We've used these same forms to pour many pool decks as you can use them over and over again.
Check out the Z Poolform forms here: concretecountertopsolutions.com/
EMAIL ME - mikeday@everything-about-concrete.com
LEARN FROM ME - PRIVATE MEMBERSHIP AREA:
www.theconcreteunderground.co...
GARAGE FLOOR EPOXY FLAKE COATING COURSE:
www.theconcreteunderground.co...
MY STAMPED CONCRETE COURSE:
mike-day.mykajabi.com/offers/...
MY CONCRETE SLAB COURSE:
mike-day.mykajabi.com/pl/79570
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykajabi.com/offers/...
GARAGE EPOXY FLOOR COATING COURSE:
mike-day.mykajabi.com/offers/...
VISIT MY WEBSITE:
www.everything-about-concrete...
USE THE SAME TOOLS I DO:
36" MBW POWER TROWEL:
imp.i284638.net/oeRMmn
ScreeDemon Gas Powered Vibratory Screed:
imp.i284638.net/4ZKEL
Screedemon Battery Powered Vibratory Screed:
imp.i284638.net/LzdBo
14' Screed Board for ScreeDemon:
imp.i284638.net/QOPDZM
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything-about-concrete...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.com/form/44/2003...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
everything_...
Follow my Facebook Page:
/ everythingaboutconcrete
Пікірлер: 30
I love that you explained tooled joints vs saw cut. I hate hearing so often that saw cutting is for hacks who don't know what they are doing.
@MikeDayConcrete
Жыл бұрын
I agree, we do both. Mostly saw.
Thanks for the lesson
This was a huge help for my pool project at home. Thanks mike.
@MikeDayConcrete
Жыл бұрын
You're welcome!
Just awesome!
@MikeDayConcrete
Жыл бұрын
Thanks again!
Excelente trabajo 💯 👊
@MikeDayConcrete
Жыл бұрын
Thank you!
Nice job Mike.
@MikeDayConcrete
Жыл бұрын
Thanks 👍
Thanks for the video 👍
@MikeDayConcrete
Жыл бұрын
You bet
Whats that attachment on the back of the truck called? That's handy
Great job guys! Way better than Styrofoam forms!
@MikeDayConcrete
Жыл бұрын
Thanks, they really are!
Should have added the cutting process as well love the look
Would have like to see you strip the coping forms to see how it looks
@MikeDayConcrete
Жыл бұрын
I've got other videos that show that. Darin and Luke stripped the forms on this, I wasn't there to video it.
Do you hire and train?
Tooling the edge after broiling… does it leave a slight ridge at the broom/smooth interface? Are you able to knock it down without disturbing the brim finish? Thx
@MikeDayConcrete
Жыл бұрын
No ridge when we do it, but it could if you don't really know what you're doing.
you never have issues stripping the z forms the next day? No honey combing?
Why is one corner rounded off and the others squared off?
@MikeDayConcrete
Жыл бұрын
Homeowner wanted that.
Can you and have you used those forms on fiberglass pools ? How well does that work ? Thx
@ZCounterform1
Жыл бұрын
Yes, you certainly can. We have a Receiver Track that gets fastened to the top of the pool first in order to hold the Poolforms in place. You can see a full deck our on a fiberglass pool here - kzread.info/dash/bejne/epx1tZKLgZWdm5M.html
@MikeDayConcrete
Жыл бұрын
Yes you can. I got a video coming up about that. Basically works the same, we had to screw on our receiver strip for the only difference.
@kipcarroll5644
Жыл бұрын
@@MikeDayConcrete THX MIKE
You didn’t show how to take the Z forms off!!