People, as usual in this kind of videos, if you have any doubts, leave them in the comment section and we all will try to help you as a community :D ALSO, remember that every RAM Stick has an overclocking limit, being it in terms of frequency or timings, once you reach one, try to complete your OC with the other. AND, you need to go into BIOS to overclock RAM (and activate the advanced OC mode)

@rick_takahashi

3 жыл бұрын

You know what this video needs to be better... 1. Get rid of the RAM theory part (create a dedicated video for it and link others to it for any RAM OC video in the future). 2. There is no real OC session, like step by step guide.. it's always theory.. what new people need in OC is an actual example... 3. Example in OC for Ryzen system, Separate example for Intel system (this includes XMP, and the timing part) 4. TM5 is discussed but not shown how it runs For visual learners, these are really important. This is constructive criticism, I hope you incorporate this in future RAM videos

@DetonadorOver

3 жыл бұрын

Hello, man. I have a question... RAM 2T with gear down mode enable is better than 2T with gear down mode auto and 2T with gear down mode auto is better than 2T with gear down mode disable? Nice video and Sorry for the trouble!!!

@DetonadorOver

3 жыл бұрын

@@rick_takahashi That's it!!!

@timeDrapery

3 жыл бұрын

This was a great video! You're the first YT tech guy I've seen actually talk with some depth about DRAM OC

@mx-gaming87

3 жыл бұрын

I wish , you can make a video about , what do to first when bios is on standart settings and what do next step by step , because not every one understand english well . I really like watch your videos , but this stuff her is bit to complex to understand and do no mistake in Bios . You very cool bro .

It's very difficult to find a good tutorial on how to manually oc so this was great. BTW, this man is an absolute legend haha

@AncientGameplays

2 жыл бұрын

Thank you haha

Great video! Im upgrading my ram and its been about 3 years since i have dug in and needed a refresher. Very comprehensive and simple at the same time.

Lovely thumbnail... amazingly insightful video & easy to follow, what more could you ask for? Amazing.

@AncientGameplays

3 жыл бұрын

Thanks for the words man, You've been following this channel for 2 years. Cheers!

One of the reason why I sub to this channel, Simple explanation yet full of information that I understand easily, keep doing helpful videos cheers!

@AncientGameplays

3 жыл бұрын

Thanks for the words

@Torsdagskvallsmys

2 жыл бұрын

so wierd that the best info has no way near as many views as the flashy videos with trash information.most things are shit.. sadly. never trust someone who dosnt explaine why and just tells to copy what he says becuse he said so more or less.

All these in depth videos convinced me to subscribe, where have you been all my pc building life! 😂

@AncientGameplays

3 жыл бұрын

Hahah, i am here for 3 years haha

What a useful video, keep this high quality in your videos,cheers :)

@AncientGameplays

3 жыл бұрын

Thanks for the words man :D

I actually really enjoyed this video. Good layout and planning prior to the recording of this video!

@AncientGameplays

2 жыл бұрын

Thank you very much, I will also do a 2022 remake with more info

The quality of your silicon determines how far you can go beyond the advertised memory frequency supported by the CPU. For example, I had a 10900K which crystallized a hard limit of 2933Mhz for my RAM. No matter the timings or voltage I couldn't boot even with the nearest option of 3000Mhz. Those who won the silicon lottery could reach 3600Mhz+ with stability on the same CPU model.

Thank you for this! You’re a life saver. Easy to follow and very helpful.

@AncientGameplays

3 жыл бұрын

Thanks for watching! If not asking much, share it :D

@dpsfitness7375

3 жыл бұрын

@@AncientGameplays of course! People deserve to see this.

Clear explanation Fabio❤️ thank you✌️

@AncientGameplays

3 жыл бұрын

Thank you for being here

one of the computer techy that I follow since i build my PC as a beginner! Very good explanation especially when you are New to PC builds, very easy to Understand. Definetely gonna wait for your video regarding Ryzen 3000 Series undervolting and tips

@AncientGameplays

3 жыл бұрын

That will come also haha, but i work alone and there are SOOOOO many videos to do hahaha

Hi Fabio! Thanks a lot for your videos. In this case I follow your tips for overclock my ram. You are right I spend a lot of time😅. Finally work stable...💪

Nice video!.. and nice jacket!👍 Happy New year!

@AncientGameplays

3 жыл бұрын

Um abraço chefe! A seguir são os testes de CPUs

nice tips, i was stagnated with my ram just because can't find the sub timings for OC, but with your tips I think that this can be a little bit easier

@AncientGameplays

3 жыл бұрын

Hope i helped :D

It’s nice to see videos about the basics. I think most youtubers forgot that. As a newbie in overclocking, this video is really helpful. To add, It would have been best if you are overclocking in real-time, with a computer infront of you. This is because not all people are able to grasp everything and some are visual learners like myself. Cheers

@AncientGameplays

3 жыл бұрын

Thanks for being well man, as for being in front of the computer, well this video would take an hour or more (most likely more). These things may seem hard, but they aren't hard at all, mostly time consuming :D

@Torsdagskvallsmys

2 жыл бұрын

In general, when it comes to hardware/software questions youtubers in general, nothing about the quality of this AGs content. i mean generally it content videos is of poor quality, and there is just a few that actually Is of high quality, most likly a small timer with not so mutch views. so your lucky if you find them. and if you find them, and dont know so mutch aboout pc its hard to tell if the info actually is good. becuse its confusing... And the reason most videos is of poor quality if becuse the content creators simply dosnt really know what they talk about, or maybe they know ish what they talk about.. but really just copied someone else who knows better then they and what you listen to is their interpretation..... yes, im painting a black and white picture. but its just in general,so im using the big brush.. maybe there is also a question of time, how mutch info can a video contain... my point is, if you want to have good, and correct information, youtube should never be your first go to..well, if you know the creator knows what he talks about, then there is no problem.. But if youre not.. dont use youtube, its a waste of time.......... if you want a great advice where you find the best info.. PC forums.. you cant find better information.. I mean i know for a fact that IT enginers uses them all the time.. Becuse for some reason, the nerds of all nerds hangs around there, and they know everything.. even the one in a million problem, they got it.. IT FORUMS.. do it. becuse you have to have in mind that youtubers makes a living from these videos, so their interests isnt just to creat good content.. for some people, good content always comes first.. they have my greatest respect. some want to make good content, combined withs something they want to advertise, combined with entertainment, and the worst ones sells you "complete softwares solutions" wich contain all the software you need.,.. in reality it, they sell you software that it free for everyone to download at creators website and usually you dont even need them..they only sell a fasad, of their costumors think they need.. but in internet forums, you find the nerdiest computer nerds there is who dosnt have any interest in making money, its just their hobby. wich they actually could and probably should charge people for..,all im saying is that youtube is a bit lucrative... But its usually a very good indicator if you hear a contentcreator explaining the HOW and WHY, so you can understand what you actually are doing.. and not just do this, then this, then change this and do this now becuse i said so.. but no one understands what they really did. then run! lol

Hey man this was a pretty decent beginners guide to over clocking ram. I especially loved seeing your cute cat playing in your yard in the background. Very nice scenery and maybe a little distracting (in a good way :-P). 👌

@AncientGameplays

2 жыл бұрын

Thank you for your words

Clear explanation you have won my sub thanks for the video

@AncientGameplays

3 жыл бұрын

Thanks, you may like way more of my videos

thx you for info very helpful

@AncientGameplays

3 жыл бұрын

You're welcome

I'm new to this gaming PC builds I just bought a Ryzen 5 5600g and 6700xt. Your videos really helped a lot!

@AncientGameplays

Жыл бұрын

💪💪

Nice garden!! Looks peaceful. Is it the backyard of your house?

@AncientGameplays

3 жыл бұрын

Yeah it is :D

I found this video looking for RAM OC tutorials and discovered the rest of your content. You got a new sub! I recently upgraded my RAM kit to a 3466 16-18-18-36. I'm planning to overclock it to 3600 with the timings as tight as they can go , but if I can get 16-18-18-36 I'll satisfied. I wanted to buy a kit with those timings and frequency but they are so expensive that I decided to take the poor's man way: learning how to overclock

@AncientGameplays

3 жыл бұрын

Yeah, you can always push some FPS more, and ofc, those higher models will usually overclock more, but the price difference isn't worth

cheers dud

Thanks :)

@AncientGameplays

3 жыл бұрын

You're welcome haha

Thank you for your advice, man! I've added a little bit of voltage to my DOCP profile (I have a Ryzen 3 Pro 4350G APU) and now my system runs stable. I'm happy that solved my issue of stability issues in my RAM's DOCP profile.

@AncientGameplays

3 жыл бұрын

You're welcome man

Great vid, better than most! I have an issue with some B-die. I changed psu and can no longer reach 3600 but only 2866. Changed back psu and still system no post past 2866.. Ive tried everything!

@AncientGameplays

2 жыл бұрын

Have you updated BIOS? Do you have the RAM in slot 2 and 4?

@donkeyrhomper

2 жыл бұрын

@@AncientGameplays Hey! Yes, yes. I remembered I have an identical pair of sticks in a different rig. Just swapped em and it was the ram.. Still very strange. Guess Ill try GSkill customer service. Thanks for the response dood!

I managed to OC my Corsair LPX 3200mhz 32GB A-Die kit to 3600mhz. I had to raise the Main timings a bit old Timing Was 16-20-20-20-38 New is 18-21-21-21-39 and the Voltage to 1.4. My CPU (3700x SoC voltage on auto)seems to work fine with the Infinitiv fabric clock at 1800mhz also. The trfc on Auto was set to 990, i was able to lower it to 580 and trc from 86 to 70. Now im running memtest86 while im at work, lets See if there are errors. I got better latency and bandwith now, 3600 cl18 seems to be brtter then 3200 cl16, maybe the Infinitiv fabric clock plays a role too. My Mainboard is an old asus rog strix b350 f gaming :)

Very helpful video and quiet easy to understand. Now I will also overclock my crucial ballistix (rgb😍) from 3600mhz to I guess 3733 and shorten the timings from cl18 to around cl16-17. I searched about micron E die and found that it has a good overclocking potential . Thank you Fabio ,We are with you✌🏻.

@AncientGameplays

3 жыл бұрын

Let's see if you're lucky to have a good kit :D

I like this vid and videogame benchmarks with RAM. This overclockin basics vid is great. Thanks for the infos. Im new to mem oc’n. Got some new sticks so im stoked to fiddle with shit. On videogame benchmarks I’ve heard Escape from Tarkov uses alot of RAM (I think). I saw you didn’t like Warzone and FPSs lol but EFT might be groovy to RAM benchmark in the future :) Cheers

@AncientGameplays

3 жыл бұрын

I test maby games i dont play, but those arr hard to test due to not having a replay feature, thats all haha

Noting the CMOS fix is really helpful cuz i freaked out when my pc went into a boot loop the first time I tried over locking ram sticks

@AncientGameplays

3 жыл бұрын

Yeah, CMOS clear is the way

@AncientGameplays

3 жыл бұрын

@Sleepy Time haha, that's pretty normal, had DOZENS of those before i got to understand the usual limits of my kits xD

@tedchang2952

3 жыл бұрын

@Sleepy Time I was so scared that I broke my machine.

If you overclock your eyebrows they go blue.

@AncientGameplays

3 жыл бұрын

That's because of my glasses i assume?

@brulaapgaapmeester8234

3 жыл бұрын

@@AncientGameplays Yes, it's a cool effect actually, but be careful, if you overclock your eyebrows too much they might burn off. ;-)

@AncientGameplays

3 жыл бұрын

@@brulaapgaapmeester8234 That's the blue light filter, which is pretty cool actually, helps a lot

I have my Crucial ballistix sport LT 3000MHz CL 15 overclocked to 3733 CL 15. Crucial RAM are beast for ryzen CPUs!

@AncientGameplays

3 жыл бұрын

Yeah, some recent micron dies are really good indeed :D

Thank you so much, I tried to set my xmp 3600 and my pc got black screen. Tried to set it again but with 1.37v dram voltage and it work like a charm.

@AncientGameplays

3 жыл бұрын

You're welcome. use the software i gave in the end to test stability. i would put at least 1.4v to ensure things :D

Ótima explicação

@AncientGameplays

3 жыл бұрын

Obrigado!

Great vid as always! But IMO, LLC level is also woth mentioning because auto LLC sucks! You can lower DRAM and SOC voltage depends on what LLC level you chose.

@AncientGameplays

3 жыл бұрын

Llc has nothing to do with dram voltage mate. Usually more to soc and cpu side :D

@linggasy

3 жыл бұрын

@@AncientGameplays in my case (soc/nb llc), i tested "just for fun" on mode 6 to 8 and it did not pass any memory test or benchmarking. Set it to mode 4 or 5 and I'm good to go. From what I read around the net, some people also experiencing that, especially using cheap mobo and lower chipset...like mine! XD

@AncientGameplays

3 жыл бұрын

Thats because soc is the IF like explained. Llc at at high levels will make the voltage drop a lot, hence not passing

@linggasy

3 жыл бұрын

@@AncientGameplays messing around with PC components are extremely stressing yet so much fun (except waiting for testing & benchmarking to be finished...boring af).

@AncientGameplays

3 жыл бұрын

@@linggasy True haha

"XMP are factory overclocks you can use without any problems" DDR5 RAM XMPs not even getting into Windows: Are you sure about that?

@AncientGameplays

9 ай бұрын

That's because you're using xmp profiles out of motherboards qvl

@gokublack8342

9 ай бұрын

@AncientGameplays I haven't personally dealt with it as I'm still on DDR4 but have heard ppl complain guess that makes sense

@YGadgETech

3 ай бұрын

It’s make no sense you need to try and test it yourself each system will have the right xmp profile for it for example I found myself using xmp II because it’s more stable for me I even OC it from 7200mhz CL36 to 7800CL36 !! I found that xmp I and xmp tweaked make my system to crash a lot btw my rig is 14900k + asus z790 formula and Corsair titanium which great for OC because it’s cooling is great and comes high voltage out of the box! I’m not an expert overclocker I never touched any voltages or something only try my luck and trying to get my best out of my system ! Also have Ryujin iii which great cooling for my cpu and I OC it also with XTU I think I got an average luck from silicon lottery my sp btw is 100 and mc 78 I also found the latest 1102 bios update is so great for my mobo so keep an eye on that either!

I never knew Harry Potter is Italian and is doing PC videos now.

@AncientGameplays

3 жыл бұрын

Hahaha lol

Ryzen3600, B550m Pro4, Corsair 16gb DDR4 3600... My system wont post with the ram set to 3600mhz even with xmp. Your tip regarding upping the soc voltage sounds very promising. Fingers crossed it fixes my issue!!

@AncientGameplays

3 жыл бұрын

Ram voltage matters the most. 1.4v

@ITER345

3 жыл бұрын

@@AncientGameplays Ok, thx so much for your comment!

muito bom, 2021 começou com vídeos muito uteis e muito bem preparados. A minha board por vezes ao aplicar um overclock de memorias faz reset algumas vezes e nem chega a dar POST e depois funciona perfeito mesmo nos testes, pensei que era instabilidade mas li em algum lado que era uma espécie de treino que a board faz antes de arrancar, isso é algo que de facto existe?

@AncientGameplays

3 жыл бұрын

Sim, isso é memory training, mas vê se os valores que meteste colaram

Yeesss finalllyyy

@AncientGameplays

3 жыл бұрын

yeeeeeeeeaaaaahhhhhhh xD

Gone are the days when we had to adjust it manually. Now it’s a simple XMP mode and put the kettle on 😎

@AncientGameplays

3 жыл бұрын

Well, yes and no. The Real results comes from manual tinkering haha

@RT_Gaming01

3 жыл бұрын

@@AncientGameplays Agreed and my specific kit was rated at 3200MHZ but with manual tweaking I got an extra 200MHZ if memory serves me 😎 I remember the days of Xeon X5650 I was running over 4GHZ 😎

Another big thanks and one question though: If I don't increase frequency at all (not at all) , do I have then a more chance of success with latency?

@AncientGameplays

2 жыл бұрын

your welcome, and yes, of course

@vieczurable

2 жыл бұрын

@@AncientGameplays Thanks.

I love your videos, so when i say :i hate that jacket. Please don't hate me :)))

@AncientGameplays

3 жыл бұрын

hahaha, np. We all have our tastes :D

Thank you for this video! Question though is 1.4v safe for long term use? Any fear of degradation? My XMP profile was not letting me boot with 1.35v, but I have it at 1.4v @3200mhz and everything is now stable.

@AncientGameplays

Жыл бұрын

Yes, completely. Even high end kits use 1.45-1.5V all day long

Hi Ancient I know this is an older video but im gonna ask anyways, so I've struggled with crackly audio on discord for a while and raising the SOC voltage to 1.1v (AUTO was set to 1v) with my ram overclocked seems to have fixed 95% of my issue but do you think I need to do something else or just leave it there?

@AncientGameplays

Жыл бұрын

You could have ram issue causing that, that's why

@denniskarlsson6173

Жыл бұрын

@@AncientGameplays Prob more likely my 5700x is shit

Falai mano! Eu comprei duas XPG Spectrix D41 X TUF Gaming RGB de 8GB 3200MHz (16-18-18). Consegui OC de 3800MHz (16-15-15-15-33) e não encontrei erros no Memtest. Quando tento colocar CL15 ele auto seta pra CL16 (Pelo que pesquisei é o Gear Down Mode que faz isso). Seria prudente eu desativa-lo? Ou não vou ver diferença alguma e assim é mais seguro? Será que os timings estão ok mesmo? Existe mais algum meio de testar a estabilidade?

Next video "HOW TO OVERCLOCK YOUR GAMING DESK"

@AncientGameplays

3 жыл бұрын

hahahaha

What would you recommend for Corsair Vengeance Pro 4000MHz 18-22-22-42 @1.35V? Should I just follow the same procedure, lowering all the timings by "1" and then test? If it fails is that due to voltage or just that the ram can't handle that timing?

@AncientGameplays

3 жыл бұрын

Yeap, start with 1.45v

@frankiev3368

2 жыл бұрын

How did this go i have the same ram kit

very informative video. The best part, though, was the Siamese cat!

@AncientGameplays

3 жыл бұрын

Its Ruca haha

@Mr1Tanker

3 жыл бұрын

Why?

@windpeoples

3 жыл бұрын

@@Mr1Tanker because I also have one :)

Thanks for the great video! I used a lot of your info on my older 3950x system. I've got a 5900x on a ASUS crosshair VIII and I can't get this GSkill 3800mhz cl14 to post in DOCP. The 1 to 1 didn't post and all settings auto will not either. Any advice would be so greatly appreciated!!!

@AncientGameplays

3 жыл бұрын

You need more ram voltage most likely. Like 1.5v

I have 2x8 3200Mhz ram sticks, but when i set it to 2400Mhz or more, my pc displays nothing with no bios access. The RGB and the fans are running, but the mouse and my keyboard are not turning on. I have to put them in stock speed (2133Mhz) in order to make my pc work. Can i get help ? Before i had 2x4 2400Mhz and i had no problems. Motherboard: AB-350M-HDV R3.0 CPU: R5 3600 Ram: Vengeance RGB 2x8 3200Mhz GPU: GTX 970 Power Supply: 500W Do i have to change something ? Maybe the motherboard or the power supply.

This one’s a proven way to correctly overclock RAM! 😁

@AncientGameplays

3 жыл бұрын

Thanks for watching

@OMGJL

2 жыл бұрын

not actually... there's too much dependency/links between frequency and various timings, one should only change 1 value at once, I.e. you want to see how high your RAM frequency goes, you should go like 20-28-28-50 ridiculous timing and increase frequency until it doesn't go any higher, then tighten the CL until instability then RCD then .... vice versa

@OMGJL

2 жыл бұрын

so what he said isn't fully correct, as 17-19-19-39 for 3600 wasn't loose enough to be ignored as a variable.

@joshua878787

2 жыл бұрын

@@OMGJL i do agree with you on starting with loose timings. you're probs referring to the github overclocking guide which is imo the gold standard/bible for ram oc. However, iirc he did recommend samsung b-die or micron in the vid which can easily get those 17-19-19... timings with voltage. If a person unknowingly bought Hynix or samsung d/c/m, I agree that starting with smtn like 20-28-28... and checking the frequency cap would be the better route. (only up until 3733/3800 is the sweet spot for current ryzen's imc anyway)

RAM overclocking Is not like your typical GPU or CPU.. Numbers up up up untill youre not stable...no. Youre dealing with two sides of compute math which Is the clock and the timing and each has Its own strats to boost It up and then theres the combining part where you essentially need to have equal both timings In relation to its clock and thus ofc its power amps and volts.. All that relies on your motherboard and cpu memory controller. Nothing easy to master but very nice benefits which Id say are worth the learning.

I thought u was Arthur Morgan walking up in front them trees lol

@AncientGameplays

3 жыл бұрын

Hehehe

Is samsung C-Die good for overclocking? Cannot find it in ryzen calculator, which die would be the most comparable to that?

@AncientGameplays

3 жыл бұрын

Forget the calculator man, go step by step ans try things for yourself. Way better :D

Ancient Gameplays do you recommend a 3070 or 6800 with 5600x. Also 32gb 3200mhz or 16gb 3600mhz ram??

@AncientGameplays

3 жыл бұрын

Well, rx 6800 is fairly faster, even more with SAM. As for ram, pick the one you want more

Subscribed for Siamese!

@AncientGameplays

3 жыл бұрын

His name is Ruca haha

Hi men, I see your videos from Colombia, I 'm freaked out with my RAMS (Patriot Viper RGB DDR4 3600mhz) and my Ryzen 5 5600X, with a Asus TUF B550m-Plus Gaming, I cannot setup to the real speed (just 2133Mhz by default), I tried with D.O.C.P, changing the timings, the voltage, and it doesn't work, please can you help me or give an advise? Saludos! Thank you in advance!

With D.O.C.P I have 3200mhz with 16-18-18-18-36 and at 3600mhz after tightening the timings I can run it at 16-18-17-19-35 and 16-18-18-19-35, which one is better? any help will be much appreciated.

Can you help me please i have asrock b450 steel legend mother board with ryzen 5 3600X and corsair vengence pro 3600 MHz .. i tried to enable my xmp and the system didn’t boot so what voltages should i raise

Hey fabío, it's me, again can you please review a liquid cooler ID-Cooling auraflow x 240 ? All the reviews are shit and i can't find a review with r5 5600x P.S: I don't think I need to praise this bc we both know how good it it, keep it up. ❤️

@AncientGameplays

3 жыл бұрын

Hey man, i don't have that LC, but i guarantee you it will be fine. Temps on 5600X are pretty nice compared to Ryzen 3600X

@the_GOAT_Safwane

3 жыл бұрын

@@AncientGameplays ok then, btw nice hair man you're rocking it

@AncientGameplays

3 жыл бұрын

@@the_GOAT_Safwane Thanks, it will get better hopefully haha

@the_GOAT_Safwane

3 жыл бұрын

@@AncientGameplays wtf are you talking about, its perfect i wish i had hair like that

Thanks for the video! I have ryzen 5600x but only 3200 cl16 ram (not bad but can be better) so im trying to push the timings up. It was the same price for 32gb of the cl16 3200 than 16gb of cl16 3600 so I figured I would get the higher capacity and try and push the timings.

@AncientGameplays

3 жыл бұрын

Yeah, because 3600 CL16 will be samsung b-die, hence being more expensive :D

I have a Trident Z 3600mhz 4x8gb kit on my Ryzen 5 3600. The weird thing on my system is that when I just enable DOCP profile (Asus mobo) in BIOS EZ mode, I will surely get random BSOD thread stuck. But if I set it up semi-manually like changing Frequency to 3600 and FCLK to 1800 (in Advanced mode) it will be stable.

@AncientGameplays

3 жыл бұрын

Stable? Not tested with tm5 i am sure. Also, that is because docp will push tighter timings and subtimings. Try docp with higher voltage like i said

@technoklutz

3 жыл бұрын

@@AncientGameplays I haven't tried that TM5 app yet. The only thing that I want is its advertised performance... 😂😂😂 Since out of the box, it only runs 2133mhz.

@AncientGameplays

3 жыл бұрын

Yeah 2133 spd

@technoklutz

3 жыл бұрын

@@AncientGameplays i will try TM5 tomorrow. hopefully i won't kill my RAM... 😂

@AncientGameplays

3 жыл бұрын

Thats impossible xD

I have a Alienware aurora R12. I believe the motherboard only support 3400mhz ram. I now have 4 sticks of 3200mhz ram (64gb). I want to either get 3200mhz bdie ram and try and overclock to 3400mhz. Or 3600mhz ram and down clock to 3400mhz. But I’m not sure if the Alienware Motherboard would boot up with the 3600mhz. What would be the smartest way to do this? I know the ram that is in the pc now is dell ram (hyper fury) but want to upgrade it to bdie to get more FPS.

How can I overclock my wall clock I want to be a time traveller... 🕒⚡👽

@AncientGameplays

3 жыл бұрын

Overclock time instead

Hi bro. I am thinking about upgrade, but gpu is very expensive now. So if buy r5 5600x instead 2600. Does it make sense for vega56? Tnx. P.s sorry for my English

@AncientGameplays

3 жыл бұрын

nope, not at all man

Totally unrelated however, what drivers should i use as a solid driver choice. I had been on 20.4.2 since they came out.

@AncientGameplays

3 жыл бұрын

Well, all you can do is try and see

Thanks bro, my ram was set on 1330mhz but now its on 3200mhz

@AncientGameplays

3 жыл бұрын

you mean 2666MHz (1333x2 = 2666), now it is 3200 (1600x2)

@akhinasheedi

3 жыл бұрын

@@AncientGameplays ow yeah that, my bad

Hey! Thanks for pointing out SoC voltage limit. My gigabyte board, when all is set to auto it overvolts soc to 1.2v but it occasionally peaks at 1.26v?! With dram voltage set to 1.35v it fluctates between 1.38v-1.4v. Never experienced that on a intel platform. I'm new to AM4 so... I don't know if it is a gigabyte board issue or the psu. When I'm googling it I only find threads created by people having gigabyte boards in combination with evga gold psus, just what I also have.

@AncientGameplays

2 жыл бұрын

Gigabyte low and mid end boards are crap sadly...stick with MSI for motherboards

Can the RAM sticks go into any slot or is there an order for single and double ? I have 4 slots for RAM sticks.

@AncientGameplays

2 жыл бұрын

If you have 4 stick then it doesnt matter. Having only two, they should be put in slot 2 and 4

I have 5600x and msi b450 pro vdh Max motherboard with gskill 3200 16-18-18-38 ram 24gb (16+8) can I do overclocking

I have another question about cpu oc, when changing voltage should i tweak the vid voltage or the vcore voltage. These are both in my bios but idk which one is correct.

@AncientGameplays

3 жыл бұрын

Vcore mate, be careful to not exceed performance

@flim_flam_shrim_shram6653

3 жыл бұрын

@@AncientGameplays Ok thanks! 🙂 I will just leave vid on auto then, ive been having issues getting fully stable 4ghz @ 1.3v on my 2600 due to vdroop on prime95. Also I did manage to get stable memory xmp just by tweaking procodt.

@AncientGameplays

3 жыл бұрын

The 2000 series cpu can take 1.38v if needed

@flim_flam_shrim_shram6653

3 жыл бұрын

@@AncientGameplays Thanks for the info, now I have something to look forward to after work.

Started with 1.45V and after 20-20-20-20-40cl and then after from 3200Mhz I jump to 3600Mhz did not work so I go back to 3133Mhz 14-15-15-15-30cl 1.4V and have a 3200Mhz 16-18-18-18-36cl.

what's the name of the tune in the intro? (when saying hello to the pooch)

@samson374

3 жыл бұрын

i know a lot of ytubers use this tune a lot, i just wondered where i can find it,.

hello from Greece. Please can you help me ? I have an aorus eite v2 b550 mobo with 7 5700g cpu. My ram is a crucial ballistix 3200 cl16 32 gigs set micron-e die.Whatever i have tried ,it is impossible to overclock to 3600.I tried another set of ram that it is native 3600mhz and again the pc won't post. I tried to increase to 1.4-1.5v the dram voltage but nothing.I know that those rams are able to '"play" with them. Do you have any idea of what should i try ? Or is it some problem of the exact motherboard or cpu model ? Please any help..I have spend plenty of hours.. Thanks

@AncientGameplays

Жыл бұрын

Nah, those cpus can run 4400MHz ram. Update BIOS and tweak thing. Listen to what I say in the video about soc voltage

but cheap ram can't identify what kind of die it is, what should i do

How could your first PC have DDR 400 paired with Intel Celeron 400MHz? From what i know, those Celeron CPUs supported only SD RAM. DDR was released couple years after the release of the Celeron 400.

@AncientGameplays

2 жыл бұрын

Humm, i guess i am mistaken then i did have ddr ram later as i had another amd cpu (exanged by my uncle). Thanks for bringing that up

I have 32 gigs of ram and im only getting 2200 i cnt find my ram options in bios please help

Firstly, you'll need a half decent bios to do all this, second, if you are stuck with an older chipset, you are most likely stuck below the rated speed of the ram sticks, because the system just cant do it 😀 third, i was building my first machine with EDO-RAM, most of you i believe never even heard of 😄😄😄😄

I had dg40 3200mhz i just put the timings at 16 18 18 18 38 Soc is at 1.2500 and dram voltage at 1.4000 hehe

yay

When i set dram voltage to 1.4V, Hwinfo says its 1.42 or something. When you said 1.45 is safe did you say setted voltage or readed voltage?

@AncientGameplays

3 жыл бұрын

DDR4 voltage can go as high as 1.5V without problems. That is motherboard deviation, meaning that your mobo applies a bit more voltage than you select

@AnxStudios

3 жыл бұрын

@@AncientGameplays thank you man!

What software you use for benchmarking your ram?

@AncientGameplays

3 жыл бұрын

Benchmarking only? Maybe AIDA 64 only

@bilbobegkills8487

3 жыл бұрын

@@AncientGameplays thanks for fast reply 😊 I know aida is good but is there any free alternative? And yea only for benchmarking

@AncientGameplays

3 жыл бұрын

Aida is "Free", scores show anyway :D

@bilbobegkills8487

3 жыл бұрын

@@AncientGameplays oh ok 🙈 good to know

I have a 32g c19 2666 overclocked to c16 2993 paired with 2 8 gb c16 2666 overclocked to c16 2993 running in duel channel 😀

@mizajuu

Жыл бұрын

still?

@trippzy8048

Жыл бұрын

Yes

I have a Dell G5 5000 and the bios doesn't allow me to change anything about XMP, is there another way?

@AncientGameplays

2 жыл бұрын

Maybe it is locked

hi i have Panther Black-Gold 16GB (2x8GB) 3200Mhz CL16 DDR4 Gaming Ram (AH4U16G32C08Y7GAA-2) 2x16 gb total 32gb with xmp it overclocks to 3200mhz can i still overclock i can set to 3233mhz and 3333mhz pc runs with no problem my vddcr soc voltage is auto it shows 1.00v my dram voltage shows 1.35v and yellow i have amd 5900x i have asus prime x 570-p my cpu core ratio os 44.00 vddcr cpu voltage manual i put 1.21250 what i should do i need help please what is the max voltage for my ram can i just set to 1.4 volts my dram voltage and set my memory frequency higher than 3200mhz thank you

TM5 gives me an invalid dll error. Any suggestions why?

Is 100% stable to overclock my Corsair Vengeance LPX Micron B-Die Rank 1 CL16 from 2666Mhz to 3000Mhz 1.35V. My system seems to work great, but i don't know if it is safe. I don't want to stress test it, because i am scared.

@AncientGameplays

Жыл бұрын

Watch the video

is this only useful for 1080p? or does it also help 4k 1% lows?

@AncientGameplays

Жыл бұрын

depends on the overall performance of your CPU as well and the frames you're pushing at 4K

@InternetSupervillain

Жыл бұрын

@@AncientGameplays 5900x, 120-165 fps. Wondering if messing around with voltage and mem is worth it for stopping dips.

How do different core series and gen handle RAM overclocking? Is there a chance that the XMP settings won't work with an I3-10100 and 4400mhz CL19 RAM?

@AncientGameplays

2 жыл бұрын

I have videos about that, usually i explain those things in videos like these ones :D kzread.info/dash/bejne/g6Klx65wosTdisY.html

@TunaDad

2 жыл бұрын

@@AncientGameplays thanks for your time! i still couldn't find my answer based on this warning from partpicker: "DDR4-3600 CL14 Memory operating voltage of 1.45 V exceeds the Intel Comet Lake CPU recommended maximum of 1350 mv+5% (1417.5 mv). This memory module may run at a reduced clock rate to meet the 1350 mv voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum" Does this mean anything over 1.42v on a 10th gen is inadvisable? Excellent video but I can't find that specific answer anywhere!

guess am early

@AncientGameplays

3 жыл бұрын

You are indeed

@oljas4931

3 жыл бұрын

@@AncientGameplays wow thanks

Should you enable XMP and then change frequency or disable XMP and then do it ?

@AncientGameplays

2 жыл бұрын

Xmp will overclock to the frequency of the xmp, and timings ofc

@JMar135

2 жыл бұрын

@@AncientGameplays So if i want to do a manual frequency overclock ,would i just leave xmp and not enable it ?

Ram timings are hell but if you have time why not

@AncientGameplays

2 жыл бұрын

Exactly

You forgot Gear 1-2 and commandrate1-2 which is best 1:1 if reachable

@AncientGameplays

Жыл бұрын

Gear 1 and Gear 2 is for Intel mostly. Most AM4 BIOS right now won't allow you (at least easily) to run the IF at 1:2

was here

@AncientGameplays

3 жыл бұрын

Ty

Ive Patriot Viper 4 Steel Series DDR4 32GB(2 x 16GB) 3600MHz Kit Not a chance can i get xmp to run with a 3900xt seems to take the gpu rx5700xt out of my system when i try

@AncientGameplays

3 жыл бұрын

It is more timings dependent i assume. Update your mobo bios and give more ram voltage like said in the video

I tried using memory calculator for ryzen and i was using safe preset. I was able to boot but once i started testing it was spamming errors all the time. Then i gave up. Maybe my soc voltage of 1,05 was not good enough or 1,37V dram volgage was too low. I just wanted to make my timing tighter on my 3200 cl 16 memory kit

@AncientGameplays

3 жыл бұрын

The obvious was the timings. You need loser timings. Dome kits just wont give more

@gameison4813

3 жыл бұрын

@@AncientGameplays Isn't safe mode supposed to be loosely timed? Or am i missing something?

Is it bad to have a decimal behind cpu frequency iknow this is about memory 4701.88/3600.69 ?

@AncientGameplays

2 жыл бұрын

What do you mean? Where are you seeing those values

Hey Fabio what about a Samsung c-die? Mine is pretty bad 😆

@AncientGameplays

3 жыл бұрын

c-die aren't that great yeah haha, but sometimes all you need is Luck of draw, and a bit of tuning

@rafaelmaffei2055

3 жыл бұрын

@@AncientGameplays sure mine Was xmp 3000mhz 16 18 18 36 Now i run 24/7 on 3466 16 18 19 36 1.385v but with stock subtimings every time i change i need to reset The biOs so i decided stay stock sub timings hahaha

@AncientGameplays

3 жыл бұрын

I feel you xD

max voltage for ddr4 is 1.5v? but for ddr5 is? bought a ddr5 6000mhz 1.350v xmp last month. when enabled xmp my system unstable, raise a dram voltage from 1.350v to 1.365v, and yess my system is stable now. can i know 1.365v for ddr5 ram is safe? just upgrade from ddr3

@AncientGameplays

Жыл бұрын

I believe even 1.4v would be fine dont worry

@suthtokcraew1227

Жыл бұрын

@@AncientGameplays ah great 👍 thanks for input sir 🤟 the best ram oc video