How to Make Professional, Custom Fingerboard Decks
Тәжірибелік нұсқаулар және стиль
Figured it was high time I did a rundown of how to press and shape these diminutive decks. Hope it's helpful!
Check out the new custom shaper blocks:
www.goodroadscollective.com/s...
Grab a countersinking collet:
www.goodroadscollective.com/s...
Or get the print files and print one for yourself:
www.goodroadscollective.com/s...
Check the shop for other board building tools:
www.goodroadscollective.com/shop
Want to support the channel? Check out the Patreon:
/ goodroads
IG: @chrisfromgoodroads
Tunes by Drew McCann:
drewmccann.bandcamp.com/
Пікірлер: 48
For the love of god please use nitrile gloves when using gorilla glue Chris! Jokes aside thank you for giving me the push in the right direction. Much love from the Netherlands.
I use packing tape to protect my mold but i've also used a sheet of felt in addition to the tape to protect the deck from the layer lines from the 3D printer.
Great products and videos!! Been loving the presses! The counter sick adapter thing is nice, way to make it short so you don’t go all the way thru! Smart!
Very nice work! Awesome content.
Thank you so much for the in depth explanation! I'm an old school skater from the 80's and will always be a skater at heart but I quit skating long ago so I wouldn't injure my hands or arms since I now blow glass. But I can do fingerboards!!! I found myself a new hobby! We'll see where it goes from here!
@GoodRoads
11 ай бұрын
Glad it was helpful! Have fun with the builds!
Well done. You can cu t the veneer with a box cutter when its soft in the mold if you don´t have a sander.
ive been using your original design file for about a year and with FDM printing ive started to use 2 pieces of masking tape on each side of the press. Ive found that i dont get any of the lines from print lines on the press, makes a great quick release too.
Good tutorial!
Thank you so much for this video 🙏
Would love to see you try to tackle casting some fingerboard wheels
Awesome! thank you!!!
Incredible, it would be great to see some mold for fingerboard bushing!
Awesome 👍🏽👍🏽
You can use a dremel to countersink the holes.
What size drill bit did you use to drill the four holes?
for me wax paper is the easiest to remove without scrapping or sanding.
Ever tried tite bond? Or hot hide glue? They use it in guitar repair. Supposedly those glue joints are stronger than the wood would ever be. Might be worth a try
@GoodRoads
7 ай бұрын
Titebond 2 and 3 are great for full size skateboards but since the veneers for fingerboards are so thin all of the moisture in the glue causes serious warping problems in my experience. Hide glue is an amazing material for certain projects, it's flexible and can be removed with heat (which is why it's used in instrument making) but I don't know if it would have the structural properties we need here. Might be worth testing!
Will the new Version be sent to the people who brought the last iteration or would they have to just the new mode files again ?
What size finger board mood is it ???
what size drill? 1/16?
What’s the difference between tub and radial?
Does eBay deliver to Africa? I have been meaning to get into the fingerboard business just cant seem to find any veneer in my country and I am skeptical placing orders overseas
yes can you please put the drill adapter up on your site and the bit to go with it? or link me to one please 11:05
@GoodRoads
Жыл бұрын
Just added it to the shop: www.goodroadscollective.com/shop/p/print-files-fingerboard-countersinking-collet
Drill bit size?
Fala irmão, as marcas deixadas pela impressão 3d na madeira, consigo tira lixando ? Obrigado 👊🏼👍🏼🥋
@GoodRoads
2 ай бұрын
That usually works for me
Did you have to dampen the surface of the veneers before applying? The directions on my polyurethane gorilla glue states the surface should be dampened to activate the glue. Is this the case? Cheers, j
@GoodRoads
Ай бұрын
The atmospheric moisture has always been enough for me and I don't live somewhere particularly humid
@DazedxHipster
Ай бұрын
@@GoodRoads ahh I see. Thanks for getting back to me. I live in the desert, so I might have some trouble without water. I’ll probably have a spray bottle handy and mist some water on before I apply glue. My only fear is that the water would cause warping.
Redemption fingerboards sells a tonne of veneer for decks
More snowboard videos?
Website no longer exists....
Could you share the 3d print STL files please
@GoodRoads
6 ай бұрын
All the print files are available at goodroadscollective.com/shop
@WaylonAplb
6 ай бұрын
@@GoodRoads thank you so much
@WaylonAplb
6 ай бұрын
One more question Did you design the prints or did you find them somewhere because if you designed them I would like to know what software you used
@GoodRoads
6 ай бұрын
Yes, these are my own designs. I use Fusion 360
@WaylonAplb
5 ай бұрын
Thank you alot
I think I'd use a jewelers saw to cut the deck out.
ngl i hate routing decks but it's worth it to me 😂
@TCFingerboards9661
Жыл бұрын
I still don't fully understand why people do that.. unless obviously that is all a person has but if a person had a router, disc sander, or belt sander and chooses a router then rip
@maigodied3226
Жыл бұрын
@@TCFingerboards9661 for me, its how quick the process is when you're trying to cut a lot of boards in one day. I tend to stack uncut blanks for a couple weeks and cut them all on the same day so routing them makes this go by a lot faster. with that being said, I am incredibly careful and have learned what not to do while routing with small guides without getting hurt. (luckily if im being completely honest) I wouldn't recommend anyone do this the same way I wouldn't recommend anybody go 150 on a motorcycle. but thats not gonna stop me from doing either of those things lmaooo
@TCFingerboards9661
Жыл бұрын
@@maigodied3226 😂😂 for sure man we do what we want no judgement here. Honestly I should have re phrased that and said it differently
the best hardware store is woodcraft
test