I can't find your Instagram I will be following you.

@DayTodayMarv

7 ай бұрын

Sorry had to change it for the brand it’s @Brazlexbespoke now

@MischiefOne

6 ай бұрын

@@DayTodayMarv im following

Dental Assisting Student/Grillz Maker here - I fw your details and explanation. Also the non gatekeeping (that’s a black king right there) and I love this video

@DayTodayMarv

5 ай бұрын

Appreciate you bro 🙏🏾🙏🏾

@gumbo5637

2 ай бұрын

Yo i jus went to yo profile. Im excited to see yo skills luv. EFDA/ grillmaker here. Yo, do yo thang. I want to see u in the future. ML

I started dying when he said “ohh wow this is a lot more work than what I thought it was gonna be” cuz I was thinking that same thing😂😂😂😂

@DayTodayMarv

11 ай бұрын

Lmao all facts

This was great. Very genuine💯

fantastic tutorial. Made me even more confident

Thank you

U the goat

They cool

Bro did the impossible. Talm bout he didn't do tha best, foh. Its perfect

Thank you so much for the list ❤❤

Bro I been doing this 4 so fkn long now using all these pretty good videos and yours are by a mile the best for all the reasons u saying¡! This shit helped so much felt like I was being taught it properly by someone keep that shi up 🤩

@DayTodayMarv

5 ай бұрын

Appreciate that bro we all gunna win ✊🏾

“They don’t tell you that part!” Thank you so much bro.

@DayTodayMarv

2 ай бұрын

Ofc brudda 🙏🏾

That's actually such a well explained tutorial, I wish NileRed had watched it before making his pair. Now he made bulky trash that looks nothing like it's supposed to and is embarrassed to wear them.

@DayTodayMarv

10 ай бұрын

Broooooo I was saying the same thing. I was like damn if he watched the process first it’d be pretty good for him.

@AgateJeweler

8 ай бұрын

He ballin thoe

Would be super cool if you continue documenting the process of the grillz. Much love!

@DayTodayMarv

10 ай бұрын

Yes! Sorry been crazy busy man but I’m working on the casting process soon.

@peefn

10 ай бұрын

@@DayTodayMarv Hell yea excited for that! Take ur time.

is there a certain wax thickness you are suppose to use if you are planning to set diamonds?

Fun fact, Grillz were invented by a man named Eddie Plein from my country Suriname who moved to the U.S in the 70s. My grand parents era in my country was when people rocking one or two gold teeth was seen as a sign of wealth but that changed after a few decades and it was later looked at as 'ghetto' so a lot of people took theirs out. I spoke to him a while back and he told me "You can learn how to do it" and now I'm here. Thank you for this great video.

@DayTodayMarv

11 ай бұрын

that’s pretty dope man. Shouts out to Eddie for making it popular

@alphawolfjames9881

11 ай бұрын

@@DayTodayMarv absolutely! Salute! ✌🏾

@ryanlawson9051

10 ай бұрын

My Suriname brotha ay

@SunnJourn

2 ай бұрын

I disagree. Solomon in the Bible had grillz and that was well before the 70’s.

@DayTodayMarv

2 ай бұрын

@SunnJourn interesting gotta look into that

What’s the ideal wax sheet thickness bro?

Where did you , or how did you get the teeth models to place the wax on ?

Can I use a soldering iron instead of the wax pen?

Ok good

How did you get it out?

Hii! May I ask what you use the heat gun for? In your Amazon list

You videos good I watch you grillz from wish

@DayTodayMarv

11 ай бұрын

Ayyyy thanks man. Funny enough that video inspired me to start making grillz.

Hello brother so I wanted to start making griilz but some of the materials in the list ara unavailable can u make a new list with things that are available so I can order immediately? Or can I dm you somewhere so u can help me ?

Can you do a video of where to get materials

@DayTodayMarv

Ай бұрын

First link in the description my friend

Bro how u releasing this right as I start learning, appreciate the wisdom 🙏🙏

@DayTodayMarv

11 ай бұрын

Ayyyyyy glad it was in good timing!

Dope vid! Wouldn’t pushing into the gum make the cast uncomfortable for the customer?

@DayTodayMarv

9 ай бұрын

Thanks! And not necessarily everyone has about 2mm of free gingiva. For example the whole reason of flossing is to get that extra debris from under the gums and off the teeth.

New subby 😊

So can you do a video with you showing the equipment how much and so fourth

@DayTodayMarv

6 ай бұрын

Funny enough this is the next video lol

Yo bro what’s the instrumental at the beginning?

@DayTodayMarv

4 ай бұрын

I’m not even sure lol. Gotta see if I can find it but I’m not even sure

could you make a video on the teeth impression/mold process?

@DayTodayMarv

10 ай бұрын

Yes that’s actually a simple process that I can make pretty fast! Aiming for the end of the week!

what did you use as your wax separator?

@DayTodayMarv

9 ай бұрын

Baby oil but you can also use model adhesive spray

Where do u get the models from or do u have to make them ?

@DayTodayMarv

9 ай бұрын

How to make a mold of your teeth (grillz dental impression) kzread.info/dash/bejne/onl3u6Nwdq6so6g.html

pls show us how to cast it with silver or gold and add diamonds even if its a middleman process

@DayTodayMarv

11 ай бұрын

It’ll be in the works my man! Out of the country at the moment!

Brother how do you smoothen the wax out? Do u have any other tips? Because i struggle a lot with it.. i would really appreciate it, thankyou brother 🫶🏼

@DayTodayMarv

5 ай бұрын

Hey bro, there are a couple ways. MAIN THING FRFR IS PATIENCE. But you can use an exacto knife, or the wax carving tools you basically wanna go over them with the sharp edge at a slight angle and gently scrape at the surface. The harder the wax the better so keep a bowl of ice water next to you. Another way once you’re trying to polish the wax to be even more smooth I learned is using a cut of pantyhose or a silk Durag. Pulling the silk over your index finger tightly and rubbing gently over the surface is also a decent way to smoothen it out.

@viictory.194

5 ай бұрын

@@DayTodayMarvI will keep these things in mind when im gonna try again. Thanks a lot 💯

Hey Big bro how much gold or metal does it take to make 1 tooth cap? Or how many grams per tooth?

@DayTodayMarv

8 ай бұрын

HOW TO MAKE GRILLZ STEP BY STEP!! 🥶👍🏾👌🏾 kzread.info/dash/bejne/qG2YztV6YZq9frg.html in this video I pretty much go over everything when it comes to the grillz process. But if you’re just looking for that answer specifically I think you can skip near the end where I go over a formula that will tell you how to find how much metal you need

for what did you/he used that heatgun??

@DayTodayMarv

29 күн бұрын

Didn’t. But if you wanted to, you can use it to heat up the wax when molding on to the model to make it more malleable.

My wax pen only gets to 200 and sometimes the wax cracks is it because it’s not hot enough?

@DayTodayMarv

7 ай бұрын

Sounds like it, wax cracks when cold either that or your pressing too hard.

Do you have any good wax brand from EU ?

@DayTodayMarv

7 ай бұрын

Hey bro sorry I don’t

Hey can you send a link for the wax sheet mold and also the concrete mix you used for the teeth - greatly appreciated

@DayTodayMarv

7 ай бұрын

Description!

Bro how you get the wax mold off the dental mold? Do you cast it with the dental mold

@DayTodayMarv

11 ай бұрын

Aaaahhhhhh shiiitttt someone ain’t watch the full video lol 😂. But nah woe you just either spray “mold release spray” or put baby oil on the model before doing the wax up

@DayTodayMarv

11 ай бұрын

Aaaahhhhhh shiiitttt someone ain’t watch the full video lol 😂. But nah woe you just either spray “mold release spray” or put baby oil on the model before doing the wax ip

@user-du8ov1lr8n

11 ай бұрын

@@DayTodayMarv tried it before but never used baby oil so I’ma try that, but shouldn’t it be way easier just casting as is and not pulling it off the dental mold? It would be more precise

@DayTodayMarv

11 ай бұрын

@@user-du8ov1lr8n probably, I’ve never tried it that way before. I have some dental friends that do it in a way like that but I’ve never done it.

@user-du8ov1lr8n

11 ай бұрын

@@DayTodayMarv thanks for the video keep grindin’

How thick are these wax sheets?

@DayTodayMarv

8 ай бұрын

20ga

2:28 kinda like your cuticles

Did you use just one layer of wax or two? And what gauge

@DayTodayMarv

9 ай бұрын

I used one but you can use two. The downside of that is that this makes your wax weigh more which in turn makes you have to charge more cause you’ll have to use more metal and then your piece will be heavier.

@laz-e-gamer

9 ай бұрын

@@DayTodayMarv thanks I asked because I actually started using more wax I was scared one sheet would be too thin

@gogetterjewlers

9 ай бұрын

@@DayTodayMarvhey bro the advice was helpful got 3/3 casting this is my Buisness account but I wanted to know if it was possible to have a 2 hr burn out

@DayTodayMarv

9 ай бұрын

You can do a 2hr burnout. Normally they’re 1-2 hrs. Sometimes 2-4 depending on the metal being used

@gogetterjewlers

9 ай бұрын

@@DayTodayMarv can I have a schedule?

Curious after adding the wax to the print why not dip the whole thing back into hot water so you can make it a tighter fit? Is there something wrong with this concept

@DayTodayMarv

2 ай бұрын

Not a bad idea you can do it like that. Honestly when doing a waxup you can do anything that works

@Mwellmac

2 ай бұрын

​@DayTodayMarv right on.. ya lot goes into the process.. I watched the other videos and am considering this as where im located Id be the only guy for miles. Any tipsnon sourcing the gold, silver for the casting?

@DayTodayMarv

2 ай бұрын

@Mwellmac dope man! But funny enough I’m working with the same issue now when it comes to getting better priced materials. The main company I’m working with is rio grande.

@Mwellmac

2 ай бұрын

​@DayTodayMarv any idea where I can see how to do plating? Like after casting .925 plating with gold etc?

@DayTodayMarv

2 ай бұрын

@@Mwellmac not atm unfortunately

А как называется этот пояльник

@DayTodayMarv

7 ай бұрын

восковая ручка

What’s link for wax

@DayTodayMarv

11 ай бұрын

amzn.to/3Y3XfAi sorry for the late reply!

Put the items you named in the description

@DayTodayMarv

9 ай бұрын

Click the link my boy

Where can i send my wax molds for casting? I don’t live near a jewelry district, and a lot of jewelry manufacturers don’t offer casting services unless you have a business. Do i need to invest in casting equipment?

@DayTodayMarv

11 ай бұрын

Hey I’m gunna make a video on this soon but you pretty much have the gyst of it. Bein real with you if you’re old enough form an LLC it’s really simple and gives you access to many discounts and other things they only give businesses. Depending on your state/country you may have different requirements for forming one but. Research a bit online. The video soon come tho, ill have it mad informative as this one was.

Do you have courses?

@DayTodayMarv

9 ай бұрын

At the moment no, but I’ll have courses soon on how to make grillz with CAD design software. Right now I’m making sure I can effectively provide information on a detailed process like this one.

@lordmikimonday

9 ай бұрын

@@DayTodayMarv thanks bro. Definitely need that cad. You use blender or rhino?

@lordmikimonday

9 ай бұрын

@@DayTodayMarv I pay right now to know what you know. Got link to the expensive machine?

I can't find part 2, unless i'm skipping over it somehow.

@DayTodayMarv

11 ай бұрын

Oh nah, it’s coming soon lol sorry. Been out the country for a little so haven’t had a chance to make the video

Do you need a license or permit to make these?

@DayTodayMarv

11 ай бұрын

In some states I know you need a license to take molds of the peoples teeth. Such as being a dental assistant. Or something in that field. But that’s the only thing I’ve heard.

lol. now take them off the rock. good luck!

Your definitely not a dental tech 😅

@DayTodayMarv

9 ай бұрын

Lol dental assistant

Why tf do people call it grillz , if anything it’s a grill. Grill is slang for mouth. Grillz is yt washing it

Great video! I was wondering how you deal with shrinkage after casting? I have found that my model’s dont fit great afterwards 🥲

@DayTodayMarv

26 күн бұрын

kzread.info/dash/bejne/qG2YztV6YZq9frg.htmlsi=TWJ1Cgwr3oU6uzyO @5:20

Thank you

@DayTodayMarv

7 ай бұрын

Glad it helped man 🙏🏾