This the way it should be done, no complications easy to understand its very clear and less confusing.Very comfortable to follow. Thanks alot

I'm interested in making grbl cnc, so I'm watching several videos, but this one seems to be the best^^ I can feel the whole process at a glance~ Good video I'm very grateful to watch it again!

Excellent video! I love the way you re-purposed so many parts to build this, but it looks really cool, and runs great! This would be great for introducing CNC concepts, thanks!

Thank you so much for give so many information about the grbl and inkscape software ....but also make one video on how to install g-code sender software in Windows 8.1

Thank you MI, for providing the necessary links, especially for the Inkscape extension. I was able to complete the circuit part of the project and test it. The stepper motors and the servo work as expected (My Inkscape version: 0.91). You need to carry out one correction: At 6:38, the resistance is shown at top left corner as "1.6 Ohm". It should be 1.6 K Ohms.

@MrInnovative

7 жыл бұрын

oohh yes thanks to point this out

Thank you for this tutorial. Its impressive. Greatings from Germany

ขอบคณะสำหรับทุกสิ่ง thank you

@MrInnovative

7 жыл бұрын

+พระนคร วีรพโล จิตต์สกุล Come and discuss here mitricks.in/forums/forum/discussion-forum-for-project-queries/

Parabéns , muitíssimo obrigado o meu projetinho funcionou ....

I built the same project yesterday and it works awesome flawlessly

@niteshdevraj9981

5 жыл бұрын

hey, bro, could you help me I need your help related to this project

@theconcheror5691

5 жыл бұрын

@@niteshdevraj9981 what help?

@douglasdouglas4352

3 жыл бұрын

@@theconcheror5691 The servo is not working, idk what to do

@manurk8112

2 ай бұрын

Hii, there is no MI GRBL Z-AXIS Servo Controller extension 😢 please help me

@manurk8112

2 ай бұрын

Please Prove me the link of Inkscape application

Thanks for complete guie and full ddetailsThis will iinspire me and many to DIYBecause you make it so easy and simple Thanks again

@MrInnovative

7 жыл бұрын

ohh thanks brother

Very nice and interesting this tutorial .. after many hours of searches and surfing on the net we finally found what we are looking for ... thank you and appreciate the quality of the video tutorial ....Congratulations!

@ahmdabdallah2132

5 жыл бұрын

Niko Niko 🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.

@amdhwk

4 ай бұрын

​@@ahmdabdallah2132What is the role of this messsage here? 🤣🤣

Bro u are awesome man!!!

Very useful for beginner, thank

excellante my friend keep going

nice video! fairly clear. the piece of software is the hardest. thank you! Rob.

@MrInnovative

7 жыл бұрын

thanks & yr welcome man

Very usefull information for me, I already made it. thankq

@MrInnovative

7 жыл бұрын

yr welcome

Excellent Video

Thank you Mr Innovative for this great effort - It isH-Bridge Stepper driver integrated project I tried to apply it but using L298 I found my motor is doing sound but not moving neither X nor Y I uploaded a sketch to check the 2 stepper motors they are running well Where do you think is my problem? Many thanks in adavnce

Hi, thank you for that video I have one question about the end stops : On your drawing, I see switches on the end stop wires, are they physical switch buttons or it is managed by gbrl? Could you light me up about this? What is the exact wiring for the end stops, sorry for my bad english and my non-knowlege of electronics ;) Regards

thanks, it is exciting project, it has full thing I need to build cnc mini

@MrInnovative

7 жыл бұрын

your welcome

Thank you very much Mr. Innovative.

@MrInnovative

6 жыл бұрын

your welcome

nice job. thank you

@MrInnovative

7 жыл бұрын

thank you

Ficou top!!! Parabéns 🇧🇷

Thank you so much!!! The best tutorial video I've ever seen...I'll test it in the morning!... I had some problems uploading GRBL..but now I think I can fix it,because of you ! Allready Subscribed ! But...how about connecting 6 wire medium stepper motors to CNC shield ? Waiting for your reply, Thanks ! You're awesome

@MrInnovative

7 жыл бұрын

Thanks you very much brother this link will help you www.instructables.com/id/Arduino-6-wire-Stepper-Motor-Tutorial/

@sbieramark1633

7 жыл бұрын

Thanks !

thenks

Excellent video

Hello,Good job Mr Innovative

@MrInnovative

7 жыл бұрын

thanks man

شكرا جزيلا الله يوفقك

How do you determine the step settings for each motor? such as which pins under the drivers to use jumpers on and what settings to use on the G code sender? in my case I'm using the Universal GCode Sender (java)

Como ajusto o ângulo do servo motor ? Ele está girando a 180°. Onde faço o ajuste pra 90° ?

Hi, very good video !! I have a problem. I set everything up as uested says, but the servo motor goes down when it is at x0 y0 and it is doing lines, that is the servo does not get up when it has to go from one place to another, or also when the job ends the servo stays down, Instead of climbing Greetings from Argentina!

Thank you good link

hi Mr Innovative i have finaly managed to get mine working but could you tell me how to speed it up. keep the videos coming, you are the best on you tube at explaining, many thanks.

@nshiva2151

3 жыл бұрын

set the speed value to 0 in delay idle while saving to gcode

Can I use NEMA-17 Stepper motors instead of Old CD Drives !

i use shield cnc v3 and A4988 and dvd reader like you just i want to be sure about shield alimentation is 12v/0.5A or 12/2A ???

If grbl can be used when using Motor shield only?

Thank you for you, I work for the same project,but I have a problem for power ,I do not (know how much I need (volts, ampere

@nshiva2151

3 жыл бұрын

you can use a 12 volt 1 to 2 amp adapter

when you measured the resistance from one end to the wiper of the current control pot,did you measure 1k6 ohms or 1R6 ohms,as the meter looked to be set to 20k ohm position,while on screen has 1.6ohm,and i measure the pot end to end at 10K ohm,1.6ohm would be hard to find on such a large resistance track. Also,when you use Grbl controler,what steps per mm did you use,i had to input 5.8 steps/mm to get close to 1mm,while some people using cd/dvd steppers use 50-55 steps/mm,i'm new to the arduino cnc,but i'm a qualified electronics technician,hope you can clear up the pot and step issue for me,thanks.

hi good to see you. your youtube is useful for me, so I decide to make cnc machine too. but I have some problem, i need to solve this promblem. Can I ask some question to you. Aduino and Cnc Shield(v2.01) is combined, and then usb plug is connected. but It happens to heat at Aduino uno I don't know why. If you know that, could you inform me?

Hi,i'd really like to use a stepper for the Z axis,but seeing as i'm still learning the arduino i'll go with this for now,i have a couple of questions,did you set the step jumpers on the cnc shield under the A4988 drivers,the servo is driven from pin Z+,is this where i might power a transistor to also activate a burning laser. And finally,your text mentions a second follow up video,can you give me the url for it , Also any 3 axis cnc with a milling tool vids. Many thanks.

Is the 2 pin jumper is necessary for the CNC shield v3 board ?

The KG130 5V Stepper Motor 28j 48 will be use????

Hey, great Video^^ I want to make my own cnc machine, have same parts like you (Arduino Uno, V3 Shield) Now i want to replace step motor for Z-Axis into servor-motor. Build it like you, but my servo don't work :(

@TheMorgansX

4 жыл бұрын

mine too

i am studying your project now...

good job my qustion ?can i do or make cnc machine at home for to made index plate

Thank you so brother........... finally i too could make it........ can u pls edit description and migrbl link to it.

in arduino program ,How change pulse/ rev for other motors .is this same for any stepper motors.

is this work also for 3d printer i mean can i make 3d printer from the same parts ( arduino and shield ) ???

i am using the drv8825 stepper motor driver , will it works the same ? plz help

Where did you make the servomotor lifting device.......Up, down lifting system

Love it man

u save the g code as test.gcode but while testing it beecame test 02.gode how

which video editing software you use to zoom in/out your computer screen and inserting a video into another video.

Hi, I'm trying to make the mini CNC machine but using A4988 modules and arduino shield instead of L293D but it seems not to be able to work properly. I used processing 3 to run the gcode that I created using inkscape. What could be the problem?

not for the result but i loved the configuration of the softwares

bro i make machine like you and i also code them i not understand when i run after certain stepper motor heat up and i changed stepper motor please reply and tell me how much voltage and ampere i used

Hie Mr innovative, Thank u for this awesome tutorial... I have a doubts...How this machine is different from that machine which u have made in earlier days using Motor shield..What are the factors like cost, efficiency, power consumption and performance etc have been changed ? Thank You mate, Keep UP! good work. :)

@MrInnovative

7 жыл бұрын

previous project is based on L293D Shield cost is less having limited functions it can;t handle bigger stepper motors this Project is based on CNC cost is high, having vast function to use like Hard limit, soft limit, homing, etc, can handle lager steppers upto 30A Ratings & can handle upto 4 steppers motor offcoure many of this function can't cover with this DVD drive machine but useful for those who working with big CNC machine / 3D printer idon't have bigger stepper so i demonstrated on this small motors

Hye Man you win it all by replaying, to be a real Mr Innovative you just need not to publish DIY but to support people and teach them as well, and you have got everything in you, much much appreciate for that. now back to my concern how do I do it? I only see option in inkscape under MI-GRBL- Zaxis to set the degree it servo should turn but it do not allow to do negative turn which I need in order to reverse the move, I am using server Tower Pro Micro Servo 9g (SG90), please explain the step by step process to reverse the servo move, currently it down the pen rather upwards when move from one point to other point to start writing, and the best place to mount server is as you have shown only, installing other side will reduce the Y movement :(

@MrInnovative

7 жыл бұрын

you have to reverse the M5 & M3 settings if currently Servo up = M5 & Servo down = M3 then reverse it like, Servo down =M3 & Servo up = M5 Vice versa..

Hello friend... I made exactly what you did, even change the GRBL Values. But i don't know why the CNC makes very small my spiral draw, even if i put the correct values like you. For example if i make a square with 40mm long, the CNC just travels like 15mm... What could be the problem? Thank you !!

Mr..innovative,can I use DRV 8825 stepper driver in place of A4988 stepper driver? For this change do I hv to make change in software?pls explain in details. Thanks

good bro

Hi can you please help me in setting penlift servo. I am using bcnc software. Thanks

WHICH VERSON I DOWNLOAD

Pengen belajar lebih detail lagi nich

Also when the servo is attached my computer wont recognize the Arduino, unplug from 5v/gnd and it works right away. Any idea why this may b happened?

i got to make one some day

@MrInnovative

7 жыл бұрын

sure brother

Its works..👍👍👍

hello, i have made the same from a4988 stepper but my motor only vibrate it doesn't move i also tried to change resistance of stepper but it doesn't make any change , I'm using 5v,2amp adapter please help me.

Hello Great video thank you for uploading it. From about 15 videos I looked at this was by far the most informative.. However I believe there is an error on 5:13 servo plugging. The servo should be connected not to +z Endstop, but to SpnEn. If you look at the inkscape zmotor routine at 12:44 you will se that the pen unp/down setting is connected to the 90 degree M3 instruction. I looked up in google what this M3 instruction is and it is Spin Enable (SpnEn). I am away on trip so it will be a couple days before I can verify this but I believ that may allow many users to have a functioning z drive.

@ptymaker8743

6 жыл бұрын

My Bad.... openbuilds.com/threads/spindle-how-does-it-work.6967/ shows that "// NOTE: IMPORTANT for Arduino Unos! When enabled, the Z-limit pin D11 and spindle enable pin D12 switch!" I tried it and it work perfectly.

@MrInnovative

6 жыл бұрын

ptymaker very very thankful for this

@Santiago.33

4 жыл бұрын

you can help me? my servo works backwards with gcode. When it has to draw it rises :( try to change the way of generating the g code. But I can't find the solution.

I am unable to operate servo motor with the same set up of adrino uno card. Can you suggest improve area to operate servo motor for up and down motion

Supper video

What type of switch is used in x,y axis limiting switch

How to make this vibration less and clear drawing with good speed

hey can you pls guide me that how to make x axis and y axis limit switch?

I tried this with Nema 17 stepper motors and the motors wont work. The servo works just fine. Any suggestions to help me solve the problm with the stepper motors?. The model numbers of the stepper motors are : 17HD48002H-22H. I am new to all of this. Thanks in advance for your help.

@user-eb3pp3gv1i

6 жыл бұрын

My problem is exact opposite my nema 17 motors work but the servo dosen't!!!

Nice Bhai

it"s me again: sir mr. innovative i did everything motor is working fine but it grtting hot, i wish if you could help .

What version of inskape do you use? good job!!! (y)

@MrInnovative

7 жыл бұрын

0.48.5

nice ty man

Sorry Thank you Mr Innovative for this great effort I mean it is an integrated project I tried to apply it using L298 H-Bridge Stepper motor driver I did all the steps but my motors did not move only making sound any tips?

@awanna.B

5 жыл бұрын

same prob here but i am using cnc shield+A4988 stepper diver.

@douglasdouglas4352

3 жыл бұрын

Check if u drivers are driving the correct Amper, check my post about it: autocorerobotica.blog.br/como-construir-sua-primeira-cnc-parte-1/

excellante job

@MrInnovative

7 жыл бұрын

thanks man

Traceback (most recent call last): File "servo.py", line 3172, in e.affect() File "C:\Program Files\Inkscape\share\extensions\inkex.py", line 221, in affect self.effect() File "servo.py", line 3156, in effect self.orientation( self.layers[min(0,len(self.layers)-1)] ) File "servo.py", line 3085, in orientation doc_height = self.unittouu(self.document.getroot().xpath('@height', namespaces=inkex.NSS)[0]) AttributeError: laser_gcode instance has no attribute 'unittouu'

@galkerem1091

6 жыл бұрын

www.tylerforsythe.com/2015/02/inkscape-laser-engraver-bug/ The bug is on line 3085 of servo.py (C:\Program Files\Inkscape\share\extensions\servo.py) Old line: doc_height = inkex.unittouu(self.document.getroot().get('height')) New line: doc_height = self.unittouu(self.document.getroot().xpath('@height', namespaces=inkex.NSS)[0])

@osnirlemosdasilva6791

6 жыл бұрын

tt

@gonzalobaez16

4 жыл бұрын

@@galkerem1091 hi sorry, how can I change that line in my inkscape extension, I can't open the file, if you could correct it, won't you send it to me so I can replace it? Thank you

Hello sir, I make CNC mahine with Adreno board, cnc shield and A4988 stepper motor driver, but in my case our 1 motor works in good condition and other 2 motor works very slow or some times not work properly. If we touch motor it vibrates , but it dont run.I try to adjust A4988 driver screw , but dont effect so much on motor .So please guide me, i need your help

Just a noob question: GRBL works only with the CNC V3 Shield? For example it works with a L293D Motor Driver Shield?

@robertoklein6265

6 жыл бұрын

Hi Spr. In my case, with L293 Motor Shield (Dx Electronics) none axis moves, but Universal GCode Sender seems working correctly.

In my DVD drive DC motor only available... In otherwise what kind of motors will be replace??

from which software do you modify your videos ...

Where did the servo motor come from?

Great

Hye, I must say one of the best detailed explained project on the web for DVD drive mechanics CNC using shield, I build it and everything is working ok but servo is working on wrong direction, and limit switch doesn't seems to working. any help pls?

@MrInnovative

7 жыл бұрын

if your servo works in opposite direction do revrese the "servo up" & "servo down setting" from MI-Zaxis servo control tab in inkscape, make sure you have connected limit switch properly thank u very much for compliments..

is it possible to send the g codes directly from to arduino by post processing it in arduino language?

Hello, I really like your commitment to us to learn programming, but I can not understand why when I open the program UniversalGcodeSender "Machine status" Work and position Machine position X, Y and Z are always 0, Do you know the reason?

nice jop and very good chanal.... can you tell me what the difference between mach3 and grbl.....please

@fahddavid9178

3 жыл бұрын

kzread.info/dash/bejne/g6hhspuuhqS_d9Y.html

Yaar Bhai Plzzz " make a video for complete programing of cnc machine from downloading of file to uploading it to machine

"Inkscape has received additional data from the script executed. The script did not return an error, but this may indicate the results will not be as expected." When I get to this part: 13:22 this pops up ↑↑↑

MI thank you for this amazing tutorial. I have done everything as you have mentioned. It works well but there is an issue with the alignment of different parts of a g-code! The machine starts to draw the lines as it should. Somewhere in the middle of the drawing the lines on the X axis are moved by some offset. The drawing shown by the g-code uploader are ok but the result is as if some parts are moved by offset on x axis. I have tried different g-codes with no luck. If the gcode is a single pass of the pencil with no going up everything is ok. can you help me with that plz? I can share the photos of the results if it helps.

@MrInnovative

7 жыл бұрын

looks motion is not smooth off stepper motor on the threaded shaft , will u try by applying some lubrication on shaft..

@mohammadsadeghebrahimi8256

7 жыл бұрын

Thank you. I replaced the whole assembly of X Axis and it solved the issue. Seems like the stepper and the plastic which engages inside the thread were kind of worn or sth. Good luck man!

@Jono6671

7 жыл бұрын

Mohammad Sadegh Ebrahimi you must check the specifications of the motors etc you have, and anything else that needs power. When selecting a power supply (you might need multiple power supplies for different voltages) , make sure the volts is exactly what you need, (eg 5v, 12v, 24v) and once you know how much current your devices are going to pull MAX, (say 10A for instance), I would always select a slightly higher current PSU just in case, like 12A for example. It really depends on the equipment you have.

Sir 12 v 2 A ka charger use kr skte hai kya Arduino me

nice work mr.... can you please help ?? my servo is doing bip sound ...how can i fix it ??

@MrInnovative

7 жыл бұрын

try to manipulate current through that small knobs on A4988 Stepper drive beep sound occasionally occurred when stepper are over/under power

Beatifull. I just want to know why the servomotor does not work Thank you..very Thank you

@MrInnovative

7 жыл бұрын

it have many reasons, have you uploaded the grbl version which is mention in the video's description,

y como conecto los cables de los dos ejes

how to solve this error at my project ""Directory does not exist! Please specify existing directory at options tab!"

@manurk8112

2 ай бұрын

I faced same problem, if you found the solution please let me know