How to make a DIY mini Arduino CNC drawing machine using two CD / DVD ROMs
Ғылым және технология
Hello guys, In this tutorial, we will learn how to make a DIY mini Arduino CNC drawing machine at home. This project is mainly based on the L293D motor driver shield and two DVD writers.
OK enjoy it now.
Short and sweet tutorial.Only from SriTu tech. If you think this video is good, don't forget to like and comment.
How to make a DIY mini Arduino CNC drawing machine using two CD / DVD ROMs
• How to make a DIY mini...
DIY mini Arduino CNC drawing machine
01:14 Presentation of components
01:54 Making CNC machine
14:16 Connecting components
15:05 Arduino program
15:43 Inkscape software install
17:53 Example one
21:36 Example two
***Names of components.
***step by step.
***Make it easy.
Subscribe to more videos --- / sritutech_sritu_hobby
Website for more tutorial --- www.srituhobby.com
Android app for more tutorial --- bit.ly/3GWcmmD
( Source code and circuit diagram )
=========================================
Website -- bit.ly/3iiqniH
Android app -- bit.ly/3GWcmmD
=========================================
Our store with the best prices
========================================
srituhobby.com/shop
========================================
Part's List (Our store -- SriTu Hobby)
==========================================
1.Arduino UNO board x 1 -- bit.ly/41RMh1o
2.L293D motor driver x 1 -- bit.ly/43Yc5Ld
3.Wires --
4.Servo motor x 1 -- bit.ly/3DUibAt
==========================================
Part's List (Amazon)
==========================================
1.Arduino UNO board x 1 -- amzn.to/3hnMhPj
2.L293D motor driver x 1 -- amzn.to/2Rh7dgi
3.Wires -- amzn.to/3wvMqYy
4.Servo motor x 1 -- amzn.to/3bRunmM
==========================================
( Social media links )
==========================================
Facebook-------- / srituhobby
Twitter------------- / sritu_hobby
Instagram------- / sritu_hobby
Pinterest--------- / sritu_hobby
Tiktok------------- / sritu_hobby
Reddit------------- / sritu_tech
Linkedin----------- / sritu-hobby
Snapchat-------- / srituhobby
Threads---------www.threads.net/sritu_hobby
==========================================
Thanks for watching......................
If you learned something in this video,
**Like.
**Share.
**Subscribe.
What do you think? please comment below.
#SriTu_Tech_arduino #plotter #CNC
Пікірлер: 175
Very well made project and again, soothing music mate. Good job!
Love the reuse of old cd drives!
Awesome work. i enjoyed that a lot
Thank you, good video. I am on a similar project now.
using it to draw on the pcb would be interesting to see the result. like video
Nice project 👍
Nice work!! 👍👍👍
@sritu_hobby
3 жыл бұрын
Thank you
Thanks bro
Amazing I definitely am going to try this soon
@yuganshurijal
4 ай бұрын
Did you try?
@yuganshurijal
4 ай бұрын
DID it worked?
Finally mine is also working well. Thank you for your video and help.
@sritu_hobby
2 ай бұрын
Great to hear!
@im_goutham_josh
2 ай бұрын
@@sritu_hobby brother i also but the motor are not run after the gcode file uplod in java what is the problem
good word
WoW
One of thebest videoon youtube
@sritu_hobby
2 жыл бұрын
Thank you
@celestials_being
2 жыл бұрын
Sir i have ploberm with programming in the project i can't understand programming
Good brother
@sritu_hobby
Жыл бұрын
Thanks
It work thanks bro❤
@sritu_hobby
5 ай бұрын
Enjoy
@harsimrankaurbhatti3702
4 ай бұрын
Can u please tell us how it works??
@harsimrankaurbhatti3702
4 ай бұрын
Bcoz chl toh Raha h bhut kuj bhi draw nhi ho Raha only crisscross chl rehi h ... Code gcode vgera sb thik h !! Help me plzz 😢
❤❤❤
Sir my dvd motor was different with 2 pins .is it oky?
Awesome buildd Could you please guide me how to do x and y axis alignment
@sritu_hobby
8 ай бұрын
Visit our website project
Can you please tell from where i get cd drives
Hello, is it possible to have the .gcode extension for this Inkscape version please ?
How do I calculate the x and y values based on my cd drivers??
@Atta-ur-Rehman_Engr
6 ай бұрын
values will be same bcz the length of x,y same in any cd drivers (CD size same ) 164*250
hello friends, is this possible for drawing PCB paths, thank you
My servo is not lifting up when I am making gcode what should I do for it could you please tell it
Bro we can do this with phone that means without laptop
is it ok for the motor to get hot
can we use only one CDROM.. is it possible without servomotor...i mean we can just use stepper motor from cdrom. and last can we use 5V from arduino instead of using separate power supply,
@Atta-ur-Rehman_Engr
6 ай бұрын
*One CDROM means only 1-Dimension plot *Servo Motors can't be used in this case bcz it becomes less torque with that and crank will not move. *Yes, an External source is Applicable for that you can use a Battery as well
Hello, I'm a high school student here in Brazil who is in the process of a science fair and I'm trying to reproduce the CNC plotter that you already made, but I'm encountering problems processing the program using the new version, I would be very grateful your help, thank you in advance
@pasindumalith1222
9 ай бұрын
yes of course this processing code not supporting to new processing 4 software please help
Where we buy the pen holder
I am programming Arduino uno with my mobile but there is showing error that Problem uploading to board. Please anyone help me
Hello did you attend any compitition today?
Hello friend I saw your video and I made your project the arduino is programmed but when it works only the servomotor moves and the axes do not move what can I do
@sritu_hobby
Жыл бұрын
Check your stepper motors
my drawings are getting half done when I send the gcode file in processing
@irestorationmobiles8775
10 ай бұрын
The project is still working
Sir i am getting error (frame cannot be resolved to a variable) when i am run gctrl code in processing 4 software please sir help me how can i fix it ?
**Hey There I was thinking to make this for an exhibition . But before that , did anyone try this code . Will it work in 2022 ? . Just asking cause I don't want to waste Money and hard work?? Any Suggestions **
how to solve this problem in processing software- " frame cannot be resolved to a variable "
Sir my sarvo motor Vribate but not run pls solved
hello good morning I have a problem with the last code that is shown, when it is executed I get a warning in the console saying this: there is no frame variable frame cannot be resolved to a variable do you know why this happens? I await your response thank you very much
@mohamedsadek1797
Жыл бұрын
Did you solve this problem??and tell me how you fixed it
@mohamedsadek1797
Жыл бұрын
Please reply
@dineshkumaru9337
Жыл бұрын
@@mohamedsadek1797 it is working only in old version of processing ide 3
@vijayrajkhadka5221
Жыл бұрын
Step-1: write this code in the beginning of code. import javax.swing.JFrame; Step-2: Write this code above the error. JFrame frame = new JFrame();
What is the length of screw ?
Sir please hepl me when i run my machine with g code file then y axis motor does not work and when I tested its function in g code send app then its works
@sritu_hobby
2 жыл бұрын
Please check stepper motor wires
Hello, when I generate the gcode and then start the plotter, it draws the shape, but the servo does not move up and down, and the pen is always on the paper.
@anime_footballz-edits
2 ай бұрын
Test your servo
bro my cnc working fine but next day it was not working only servo motor is working what is problem i don't know please explain what it is?
@Polaraodotcom
3 жыл бұрын
Well connected but no sound comming from two stepper motors
Hi I try this project the servo motor moved correctly and only one axis moving And I checked the motor’s coil 1,2 on the multimeter and try to test the axis on another software the x , y axis are moved but they moved only in 10mm ( y10+ up and y 10- down) with noises to Why ? I need your help ,please
@myehia7195
3 жыл бұрын
You explain every part nice 👍 and easy. bro Thank you 🙏🏻 a lot
@sritu_hobby
3 жыл бұрын
What is your controller board
@myehia7195
3 жыл бұрын
@@sritu_hobby Arduino uno +l 293 d shield The same
@sritu_hobby
3 жыл бұрын
First, undastand code and change the motors steps and other values.
@jammsc
Жыл бұрын
i have the same problem like you can you please tell me the solution
Sir workplace kha se laye..?
Sir your video very easy to understand. But there is a big ploberm with programming part I can't understand stand it. Can you make a separate video or suggest a detailed video to explaining it
@sritu_hobby
2 жыл бұрын
You can read my blog for that. There are many lessons. srituhobby.com
@adishar8552
2 жыл бұрын
@@sritu_hobby ok i am testing program in processing but String result = (String) JOptionPane.showInputDialog(frame, . but this line showing error frame can not be resolved to a error. help me please
@mohamedsadek1797
Жыл бұрын
@@adishar8552 did you solve it please tell me because i face this problem immediately ,can you help me
Se puede transformar a una impresora 3d?
@sritu_hobby
Жыл бұрын
English???
What is the size of nuts and bolts you used ?
@arduinotech929
2 жыл бұрын
Please tell sir
I need the arduino code plz? Can you write it to me and I have some other questions because I will be making it for my school project. Can I contact you for this?
@abdoubo8605
5 ай бұрын
hi ..i need arduino code...
Processing program don't wirk well Its show frame don't support like that what can i do??
Code files and other links are not in the description
DOES NOT WORK , THE MESSAGE frame does not exist appears every time , I think that the module l293 is not the best option for cnc and step motors. could you help us?
@sritu_hobby
2 жыл бұрын
You can use stepper motor driver for that.
@marciavaleriaferreirathurl8375
2 жыл бұрын
@@sritu_hobby THANK YOU.
Жыл бұрын
Hi! I changed the processing code in the following way: 1. Added a new import (line 3): import javax.swing.JFrame; 2. Added a variable named frame in the following function: void selectSerialPort(){ JFrame frame = new JFrame(); ...
Kya aap coding program bata oge
AF motor library is not download Please Help !
@sritu_hobby
2 ай бұрын
Search on Google
Form where we should get the processea program??
@sritu_hobby
5 ай бұрын
Description
I made your project it's working fine . But it started writing from Y axis let side to right side . What is the problem can you tell me . thanks .
@p90progamer3
Жыл бұрын
Wire connection wrong
@p90progamer3
Жыл бұрын
Chang wire
@moshiurrahmanmeraj6640
Жыл бұрын
Which wire
Bro that java code has some errors. The error are frame cannot be resolved into a variable
how much amp
L293D DC Motor Drive Shield Stepper Motor Drive Shield problema da temperatura esquenta muito
When im about to run the code you gave in the description it says "frame does not exist"can you please help me🙏
@sritu_hobby
2 жыл бұрын
Please visit the tutorial again and again
@hruaizela_Sailo
2 жыл бұрын
@@sritu_hobby it still didn't work..it still says frame doea not exist!how will i do it?
@alsaeedtec6070
2 жыл бұрын
@@hruaizela_Sailo i have this problem too
@adishar8552
2 жыл бұрын
yes i have the same plobem i think we have to add library in this
@mohamedsadek1797
Жыл бұрын
@@adishar8552 did you fix this problem and tell me please how i fix it
I've been trying for 6 months now but the servant doesn't I don't know what else to do!!
@sritu_hobby
Жыл бұрын
Please do it..again.
@DETUDOUMPOUCO-ne6js
Жыл бұрын
@@sritu_hobby Does it work with arduino shield v3??
How did you make this if we make this can we drawing pictures like that😎😎💯💯😎😎😉😉☺️🙂😉😉😉🤠😉🤠
@sritu_hobby
2 жыл бұрын
Please check the full video in my channel or you can use srituhobby.com web site
Hi what are the Bolt Sizes?
@Atta-ur-Rehman_Engr
6 ай бұрын
According to the "Hole" just for a support purpose.
sir please send code code not opening in description .
Bro obstacle avoiding fire FIGHTING robot code
When I uploaded the second code to the processing program, a message appeared frame can't be resolved to a variable And I replaced the motor, and this message still appears to me when I run the second code, and I do not know the solution to the problem, please help me
@vijayrajkhadka5221
Жыл бұрын
Step-1: write this code in the beginning of code. import javax.swing.JFrame; Step-2: Write this code above the error. JFrame frame = new JFrame();
@user-jk3ye2qo6x
Жыл бұрын
السلام عليكم يا صديقي انا عندي نفس المشكله ممكن تقولي الحل بتاعها ايه
@ArinduGayul
8 ай бұрын
thanks@@vijayrajkhadka5221
No links in description
@tamannalekhawat4949
Ай бұрын
Only for you 😂
Hii sir !!! Our everything is okk but at last the pen draw nothing ... Motors are well working even pen also gcode are working but id draws nothing ... Can u please fix it as soon as possible please ... It's my humble request to you 🙏🙏
@sritu_hobby
4 ай бұрын
Follow our steps
@harsimrankaurbhatti3702
4 ай бұрын
@@sritu_hobby can we contact you ???
@harsimrankaurbhatti3702
4 ай бұрын
@@sritu_hobby can we contact you???!
@harsimrankaurbhatti3702
4 ай бұрын
@@sritu_hobby can we contact you??
How much cost for making
@sritu_hobby
9 ай бұрын
Depends
Sir Aap code link nhi h description
@sritu_hobby
Жыл бұрын
srituhobby.com
Hlo bro
@sritu_hobby
Жыл бұрын
Hello
Total parts price
@M4D_M4X_official
3 ай бұрын
150rs one CD driver, 200rs L239D motor Driver, 300rs Arduino, 80rs Stepper motor
كيفية صنع آلة رسم صغيرة من
Program link plz😢
@sritu_hobby
23 күн бұрын
Description
Which one have you used CD OR DVD ROM?
@rishittandon5539
Жыл бұрын
Please let me know which one have u used
Y axis not working, please help
@sritu_hobby
2 жыл бұрын
Check your Y axis motor
@amruthbalum5328
2 жыл бұрын
Y motor is working with other code
@amruthbalum5328
2 жыл бұрын
Please send me the code bro
@Million_business
2 жыл бұрын
@@amruthbalum5328 bro are u using toy dc motor??
12v supply kitne amp ki di hai ❓
@sritu_hobby
2 жыл бұрын
english????
@nikv2501
2 жыл бұрын
@@sritu_hobby The voltage is 12V. But how much amps is power supply?
@sritu_hobby
2 жыл бұрын
2A
@srg_5941
2 жыл бұрын
@@sritu_hobby I have 12v with 2A but the steper moter be super hot
@adityarai9039
2 жыл бұрын
I can also facing this problem.. I can use 12 volt 1 amp but moter is also very hot... then i can use 5 volt 2amp phone charger but it can't draw anything.... Please solve this issue 🙄🙄 How much power supply i can use... Please reply.....
Price
@sritu_hobby
4 ай бұрын
Not for sale
Code link?
@sritu_hobby
9 күн бұрын
Description
hi
@sritu_hobby
2 жыл бұрын
hello
What is the code?
@sritu_hobby
29 күн бұрын
Description
Help me sir
Pls Provide the link for CDRom 🙏🏼
@sritu_hobby
2 жыл бұрын
Please visit the video description
@TWTechieTube
2 жыл бұрын
@@sritu_hobby Buddy! It isnt available! Please check once
Video me vays dalo vayral jayada hogi
Mana kodingna oy
@sritu_hobby
2 жыл бұрын
English???
Hello, when I generate the gcode and then start the plotter, it draws the shape, but the servo does not move up and down, and the pen is always on the paper.
@sritu_hobby
3 ай бұрын
Please follow our steps
Hello, when I generate the gcode and then start the plotter, it draws the shape, but the servo does not move up and down, and the pen is always on the paper.
@VedangPatel1122
3 ай бұрын
Check the connection of servo in motor driver