Wear a respirator even of there is no smell the chemicals are bad in the long run for your lungs.

Love how you show this systematically

Wonderful tutorial and stunning, realistic results!

Beautiful work! You make it look so easy.

Excellent job with your resin. And see I agree you do make it look so easy. Thank you for sharing 😊

Awesome tutorial thank you so much for sharing, loved every minute of your video perfect for a newbie to resin!

This video is great for starters. Thank you so much 🙏🏼

This was fascinating to watch! Love the boards, they turned out great. You have a new friend.

Thank you for making this look easy enough for us to try! Great tutorial! I’m definitely a subscriber now!!

Love it...I never did it like that...so beautiful and easy

Man your work is awesome. Congrats 👏 please keep on making more videos.

“I’m gonna give it to my mom anyway.” “Moms love everything” 😌

@A.M.Independent.Consultant

3 жыл бұрын

Yeah...that part..lol

@PourMeARiver

2 жыл бұрын

She hung it on the wall. Lol

This is a really good tutorial and very well explained, thank you so much!

Thanks this was amazing, I am going to try it out today and if I get good I will be marking some large tables and possibly counter tops. 😁

I’ve just found out about resin art and I think this is a good start for me. Very nice tutorial u can have 1 extra subscriber from me and look forward to seeing more of these

Thanks for the tutorial! I’m curious if you prepped the cutting board? And if so, how?

Fantastic job, very creative.

Great video. Looks good! Thanks for making the video.

This is amazing! I was going to book into a workshop to do this until I saw it was $140 australian. You have just saved me at least half of that. Thank you so much!😃🇦🇺

@PourMeARiver

2 жыл бұрын

Hope it helps!

Love this effect.

Beautiful! I would imagine those would sell like crazy at Christmas time. How much would you sell those for? Cost to make? Great video!!

Thank you soo much, I tried this method but still had issues using using the West Systems epoxy that I usually use, so I tried a different epoxy I pulled out some UVPOXY from Ecopoxy and it was night and day, my very first try looks amazing, enough so that I'm going to make an ocean table after I've done some more practice, again learning from a PRO is never a bad option

wow!!! excellent work thanks 😊

Really nice tutorial thank you!

Thank you so much for this amazing video RIver!!!

These are very beautiful. I showed them to a friend and she wants one. I have just finished by first river table and have experience making canoes with epoxy. I want to try making one of these. It looks like the cutting boards are finished. Do you have to sand the areas where the waves go? Or will the epoxy stick to the finish without sanding? Thanks for the video!

Great video, I really want to try doing that, it looks so beautiful. Thank you for showing me how to do it step by step.

Wow!! Amazing. Thank you.

очень круто:) ! спасибо за видео и подробное описание !

And beautiful work!!

Absolutely fantastic 👏 👌 Sir.

Love your work! Could you tell me what brand and product you are using for the white waves ?

This is amazing!!😲 Did you prep the cutting board in anyway before adding the epoxy? Or did you just use it as is?

Superb mate. Love it! 👌😎🇬🇧

Oooh lovely! You could make some nice earrings with that runoff!

@vonnie4781

3 жыл бұрын

I’ve never even thought of that! What a great idea! I think you could just put cups to catch it.

Thank you for sharing man.

Amazing, how do you remove the hardened drops of resin under the frame?

Moms love everything! Lol🤣. Looks great! 💙

Awesome, thanks for sharing.

love the tutorial very good video im subbed

This is so beautiful. Thanks for the tutorial.

Chris, what do you do to the bottom to keep resin off? Do you take it?

Can you please tell me how you prepare the back side of the board? Thank you. They are beautiful!

Waaaaaaaaaaaaaaaa!!!! Genial!!!!!! Excelente idea para hacer artístico un objeto cotidiano. Excellent idea to make artistic a daily object. Tky for sharing.

A Dutch pour with epoxy. Cool! Do you have to use a torch or would a heat gun work?

Buen vídeo, enhorabuena.

Wow pretty dang cool!!!

Great video, how much blue was in your second coat?

Is there any special prep to the boards before pouring resin?

Hey Man! Super Cool Effect! What material is the plastic sheet you are using at minute 17 ? I'm trying to find something similar here in Italy... Thanks

Beautiful ❤️

Ur a god damn artist bro. Your videos make my day better. Keep it coming man!

Did you tape off the back? I use 2 different blues for depth.

You did an amazing job! And I really appreciated that you did step by step for us and didn't leave any thing out thank you so much for that!! I had one question for you. The wood your using is it pre-treated with anything?

@PourMeARiver

2 жыл бұрын

Yes it was waxed and oiled but I sanded that off

@jamiepandagirl7561

2 жыл бұрын

@@PourMeARiver Thank you for answering 😊

Amazing!!

Hey great job! Silly question, how many Watts is your hair dryer?

What did u use for mixing the white? resin hardener and what kind of white colour? , it get little white pixel all day long and no waves

OMG he's using fire to make water!

Great can you use a heat gun instead of a blow torch? Love this art wood work. 😉

This is totally amazing, thank you. And thank you for making it look so easy. I have a question; is that butcher’s paper that covers your table and working area?

Do you make glow in the dark pigment. I have an outdoor project in mind (mailbox) and I wanted to do glow in dark for numbers.

Great work

Is there anything on the board before you pour the epoxy on?

sir, you are an absolute genius. thank you so much for sharing🙌🏾🙌🏾

Amazing!

Can you use a heat gun in replacement of the torch?

great skill boss

Which products did u use? AMAZING

Very nice!

Great work. Plus Good Job explaining. However did you sand before adding the 2nd. Coat. I don't think the first coat had time to dry. I was just wondering before i try this project

@PourMeARiver

2 жыл бұрын

No I didn't sand. I waited 12 hrs and directly poured the 2nd coat

What did you seal the boards with before you did this? Do you have to sand the finish before you make the wave also? Ty

If i don't have a torch and only used the hair dryer which blows hot air would it be enough cause I've been facing this not cell looking waves problem cause i used to blow it cold

I’d add a couple of tiny sand dollars on a top corner! I’m gonna make one! Thanks for sharing!

@MyS10Rocks

3 жыл бұрын

Great idea! Maybe add them before the 2nd coat so their protected and you can still see them!

How do you make it flat after all that resin on top? Do you leave it uneven or?

Love it! You’re so helpful! Thanks!

lol it's so simple, nice

I have mica pearl white , would that do for the waves?

did you scuff up the boards to make the epoxy stick better

I didn't notice wether you use hardener or not. Is it all right if we do not use hardener in epoxy resin?

By the way do you use the same resin for the flood pour and for the waves? Coz i want to try the resin but I was told that casting resin is meant to sink and so table top shld be used for waves. Id like to know if the resin you use can be for both casting since river tables use thick volume anyways and I see you do the waves too.

@PourMeARiver

3 жыл бұрын

Yes. I use the top coat for both. You could also use the craft

Nice. What is underneath them as table cover

Are these for decoration or can they be used for food?

So it doesnt need final sanding, wouldn't the ocean pour be higher than the board without sanding

Do you let the resin run down the sides of the board ?

What is the kind of white for the waves pls ? May u make it more clear ? Thanks

Have you ever considered using something to catch the run off resins and put them to use, such as in mounds or something?

@PourMeARiver

3 жыл бұрын

My wife uses the scraps.

@777sgiles

3 жыл бұрын

@@PourMeARiver what does your wife do with them please?

@stonedelta9361

3 жыл бұрын

@@777sgiles maybe to catch the blue resin for other products. Have the smaller size product below catching the resin.

Fully watched 😀👍

If i use more colour blue to be opaque wont it spoil the resin ?

I love your instruction, but I had to watch it several times(I'm new at this). Anyway I have two questions.. first I tried to use a bamboo cutting board and the resin did not stick!! Weird. Do you have to use a certain non coated board? Second how do you deal with all the drips on the edges???

@PourMeARiver

2 жыл бұрын

I sanded the board first. When you buy them they are waxed and oiled. You need to sand it first or buy them uncoated.

How do you keep the resin from collecting or creeping around to the back surface of your cutting boards - and if it does, how do you remove it please ? I know nothing about this stuff and havenever done it but your work is fabulously talented ! 👏

@PourMeARiver

2 жыл бұрын

I let it drips. Some people tape the bottom. I don't because it never comes out clean. So, I let it drip then I place it upside down on a foam pad and sand the drips off. After that I oil and wax the bottom back to a nice finish.

If I don't have blow tourch,how to create that cells,with hairdryer can I do,or any other method

Dude! I was wondering how this will start to look like a ocean? Then you used the blow dryer and the torch! **Mind Blown**

@aliciat2216

3 жыл бұрын

literally LOL

@kathysemmens188

3 жыл бұрын

You explained that wonderfully, amazing ❤️

What about the back of the board doesnt it get messed with paint ?

What white do you use please? Thanks

magnificent👏👏👏

Very nice 👍

The boards look like they are levitating.

Thank you for sharing, please what colors r u using exactly. Is it specifically for resin or what

@PourMeARiver

2 жыл бұрын

Everything I use is from Www.pourmeariver.com

I love this! Question, I notice you are not wearing a respirator. Do you skip it for video's or just never use one? I LOVE resin & have 2 gallons of it but never use it because the stuff scares me.

@PourMeARiver

3 жыл бұрын

I never wear one with the epoxy I use. But I don't have any reactions to epoxy. I always suggest you use one. I just don't, it's voc free but still I tell everyone if they have allergic reactions to epoxy, then always use ppe

how long did this project take you?