the best tutorial i have seen

@justpanit9872

3 жыл бұрын

Thanks David. Hope it helps 👍

@davidbaxter8084

3 жыл бұрын

@@justpanit9872 i'm certain it will, i have my shopping list so i will be building two of these tomorrow :)

@justpanit9872

3 жыл бұрын

@@davidbaxter8084 cool mate, ill be using mine tomorrow 👍

First of all, great video. I made a few of these for myself and a couple of mates. A few notes. The hole in the 32mm cap for the smaller tube to run through, use a 29mm holesaw. Way safer than a spade bit. Heaps easier too. Next is on the 20mm joiner used as a stopper. I used a handsaw and made a cut longways down it. Made it way easier to slip on. Still glued in place easy. I also bought all my PVC pieces including joiners caps etc. from my local hardware and it was cheaper than Bunnings. But the glues and plugs were cheaper at bunnings. I also made extra nozzles with 25mm tube. This was helpful in picking up the fines out of bedrock potholes. Again great video, just wanted to add some tips.

@grubbydogable

3 жыл бұрын

Another tip. I used a 6mm bolt. You can get mudflap washers which have a 1/4" hole and are wide enough to cover most of the bottom of the plug. Downside to these washers is that they are zinc coated and will rust quicker. The plug won't last forever and the washer can be changed with the plug. Having the washer on the bottom of the plug helps with keeping it rigid and getting better suction.

@grubbydogable

3 жыл бұрын

Another little tip. Try and have all pieces and glue at room temp when doing this. The glue works way better at room temp than in a cold shed like I first did.

@justpanit9872

3 жыл бұрын

Good on ya mate, these are great tips. An sure to be trying some on the next if I have to make another. Good for anyone else making one to. All hints an tips help. 👍👍

@grubbydogable

3 жыл бұрын

Thanks for the very good video.

Handy tool to have in your bag, thanks

The bath plug is a great idea. I’ve made one using a cutout thing, but a good seal was hard to get.

Great video mate. Keep up the good work

@justpanit9872

3 жыл бұрын

Cheers mate. We will have to get out soon.

@beanadventures5202

3 жыл бұрын

Always keen

Oh an forgot to say I cut 6cm off of the plunger handle before glueing together

Appreciate your research. I'll have a go at this kit. Thanks

@justpanit9872

2 жыл бұрын

Good luck.