How To Make Cornhole Boards | Lightweight Design | DIY
Тәжірибелік нұсқаулар және стиль
Learn how to build Cornhole Boards, LIGHTWEIGHT design, and regulation size (according to the American Cornhole Association).
If you found this video helpful, be sure to hit that LIKE button and if you're interested in seeing more beginner DIY and woodworking content, please SUBSCRIBE! Thank you!
SketchUp File: casualbuilds.com/how-to-make-...
#cornholeboards #woodworking #diy
---
As an Amazon Associate I earn from qualifying purchases.
MY TOOLS //
- Porter Cable Circular Saw: amzn.to/32iBXSG
- DEWALT Benchtop Planer: amzn.to/38SjBdV
- Porter Cable 6" Jointer: amzn.to/2TcV7Fk
- DEWALT Random Orbit Sander: amzn.to/2wHitvl
- WEN 5-Speed Drill Press: amzn.to/37P9uF5
MY FILMING GEAR //
- Camera (Cannon M50 Mirrorless): amzn.to/2Qh4xj5
- Blue Yeti Nano USB Microphone: amzn.to/39xUBJq
- Tripod: amzn.to/2QCdzpR
- Camera Slider: amzn.to/36fws8p
- Rode Microphone: amzn.to/39s6vVr
FOLLOW //
- Instagram: / casualbuilds
- Facebook: / casualbuilds
- Website: www.casualbuilds.com
---
I made some lightweight cornhole boards in this video. Some of the main differences than you standard design include - trimming the 2x4s down a bit and dropping in the plywood top into some rabbets in the frame. Stay tuned until the end of the video - I'll do a comparison between a standard design set and the set that I built in this video. The build process was a ton of fun and super easy. If you have any questions on how you make your own cornhole boards like the ones I made in this video, be sure to comment below and I'll respond as soon as I can!
Пікірлер: 95
Nice job! Those things look great, and as always, you’re video was top notch!
@CasualBuilds
4 жыл бұрын
Thanks, Tommy! Glad you enjoyed the video, thanks for watching!
Thanks for the tip on transferring the correct angle to the legs (after raising the end of the board 12") Many of the videos I have watched are not as clear at that step as yours - Thanks!
These are amazing - Will work well next to the smoker!
@CasualBuilds
4 жыл бұрын
There ya go!!
I've just built my first set of corn hole boards and I thought I did a pretty good job....considering they are the first ones i've ever done. Round 2 will be done using your methods. Really well done buddy! Thanks for sharing your build and thoughts!!!
@CasualBuilds
4 жыл бұрын
Awesome! These were actually my first set of boards as well - definitely had some mistakes along the way. Thanks for watching!
Great job, very nice, finishing up a set tomorrow for a friend. If I had all your tools I would love to do it this way. Nicely done!!
@CasualBuilds
4 жыл бұрын
Thank you! Im sure they came out awesome!
Nice job! I think taking the sharp edges off the 2x4's looks better in the end. And countersinking the plywood looks awesome!
@CasualBuilds
4 жыл бұрын
Thanks! It definitely takes more work, but worth it in the end!
Great video. I like your editing style and the board look awesome. Awesome job!
@CasualBuilds
4 жыл бұрын
Thank you, that means a lot. I've been trying to find my style and I think I'm almost there!
@WhiteLabWorkshop
4 жыл бұрын
I hear you there. I’ve been trying to get my style figured out on my channel too. It’s harder than it seems. Keep up the great work!
What a great build, Love the trick with the bottle cap. Great job and awesome content, Keep them coming. A new friend here!😍👍
@CasualBuilds
3 жыл бұрын
Thank you!
Killer build and build video.
@CasualBuilds
4 жыл бұрын
Thank you!
Nice video. Im looking to do something like this for my hubby. Suggestion, what about putting some sort of latch on the sides. That way you could put the boards together and carry them, or even using the piece from the hole to close it back it. That way you could store the bean bags inside.
@CasualBuilds
4 жыл бұрын
Great idea!
This is the first I've seen where the plywood is sitting within the box frame instead of on top More ways to make a cornhole board than to skin a cat . Love seeing them all. Very creative and imaginative finding that finding that bottle cap to make your hole👏👏👍. Definitely does help to remember some trigonometry, and the Pythagorean to cut out the legs for the right length and miter the ends. That way you wouldn't have to try and prop the board up first and measure, but understandably not many people are going to be able to do that unless they are fresh out of taking Trig in school or study it in their daily lives.
@CasualBuilds
4 жыл бұрын
I didn't want to have the plywood edges visible from the side so thought this was a good idea to hide them. And yeah, math isn't the strongest for me so propping it up was the way to go.
@tedp4490
Жыл бұрын
Unfortunately, the Pythagorean Theorem only works with right triangles. The legs are angled back so there is not a 90 degree angle and the triangle is not a right triangle.
@williamshultz4620
Жыл бұрын
@@tedp4490 Ahh but any triangle can be divided into 2 right triangles
Bottle cap as a rest for the router ... Genius!
@CasualBuilds
4 жыл бұрын
Thanks! I'm sure there are other jigs you can make that will be a tad more precise, but this was easy and worked perfectly!
@neddyboy01
3 жыл бұрын
@@CasualBuilds that really is a genius idea. I made my cornhole boards last week and made a circle cutting jig for my trim router.
Let me just get my fully professional garage with all necessary tools and then I'll get cracking on my DIY cornhole boards! Edit: jokes aside great work. I've got enough tools to DIY it and I'll use some of your techniques!
@CasualBuilds
4 жыл бұрын
Sounds like a good plan!
switch to glue joints to lose the hardware and cut out handle in the sides to eliminate the attached metal handles. Plane the 2x4’s to 1” nominal thicknesses
I was today years old when I learned those compass things are useful
@CasualBuilds
4 жыл бұрын
Haha, they come in handy sometimes!
If you use 1x3 boards you can cut a hand hole instead of using the handles
Is there a description of all the tools and materials?
What paint did you use?? Great video...
@CasualBuilds
4 жыл бұрын
Thanks! I can't remember exactly, but I know it was just the standard outdoor paint from Lowe's. I want to say Sherwin Williams?
How long do you wait to pull the tape after painting
You say in the beginning you made the boards to adhere to the regulations from the ACA, however your boards are 3” high when the ACA refs. are 4” off the ground at the bottom.
@CasualBuilds
5 ай бұрын
ACA says front standing height is 3-4 inches
Quick question what did you use to measure the distance from the edge of the board ? I saw it had a level and have been looking for something similar
@CasualBuilds
3 жыл бұрын
They're called combination squares!
@gomezdig
3 жыл бұрын
Casual Builds Awesome thanks 🙏🏼 great video now to try and replicate the outcome
@CasualBuilds
3 жыл бұрын
Thanks! Good luck!
WOW!! that was alot of work!! good job!! are you planning on selling them? if so, how much?
@CasualBuilds
2 жыл бұрын
Thanks! No plan to sell these. It was my first time making cornhole boards and wanted to try something different than just slapping a piece of plywood on some 2x4s.
You can further decrease weight by using 1x4’s instead of 2x4’s
@ChefBD21
3 жыл бұрын
Yep that’s what I did. It helped a lot.
@shannonp4037
3 жыл бұрын
They also sell 2x3's so less cutting for those looking for his way. I'd worry about flex with 1x4's. How were yours?
@BritoWorx
3 жыл бұрын
@@shannonp4037 no flex they’re pretty sturdy.
Does staining wood make it waterproof?
Wondering why you didn't use the Kreg kit for assembly but instead to prop the board up? Would have saved you a lot of work. Either way nice video and boards!
@CasualBuilds
4 жыл бұрын
Thanks! Yea, I'm not too sure why I didn't use pocket holes for assembly. It was probably because of the rabbet that I added for the plywood top and I didn't want to interfere with that. Who knows! Thanks for watching!
Nice, next time, use 1x3's
what a get idea for the hole
@CasualBuilds
4 жыл бұрын
Simple, yet effective!
The transition at 6:21 *clapping hands*
@CasualBuilds
3 жыл бұрын
Haha I'm glad someone noticed that! Can't even tell ya how long that took me to edit
@Zmaslanik
3 жыл бұрын
@@CasualBuilds I love the attention to details on the editing side. 🙌🏻
What do you think about using 9mm thick plywood for the top? It’s a little thicker than 1/4 an inch. I think it is .35 inches.
@CasualBuilds
3 жыл бұрын
On the official website it says the top needs to be at least .50" thick.
@gardenfox93
3 жыл бұрын
@@CasualBuilds thanks for the quick reply. I know that is the reg size but if I want to go altra light how do you think it would hold up? Do you think it would take the beating from the bags hitting it?
@CasualBuilds
3 жыл бұрын
I'm sure it would be fine, but there may be some flex to the top when the bags hit it though.
@CasualBuilds
3 жыл бұрын
I've never built a set like that or played on one with that thickness, so I'm not sure.
@gardenfox93
3 жыл бұрын
@@CasualBuilds thank you! I’m going to give it a try. Honestly I already have them LOL! Just need to put a few more coats of poly on them and I will test them out. I just haven’t seen anyone build them that thin. I’m sure these are going to bounce and move. Each board is only 18 pounds LOL! Might have went to light.
Could I use 1 X 4 instead to make it even lighter?
@CasualBuilds
3 жыл бұрын
I'm sure you could - I've seen others build them with 1x4s.
Question, why not use 1x4 if you are looking to decrease weight
@CasualBuilds
3 жыл бұрын
I wanted to do the rabbet to hide the plywood edges. Felt like a 1x4 would feel to thin.
Did you consider making a pair with 1x4 poplar instead of 2x4 lumber for weight savings. I'm curious to know how much lighter this is.? Here is a good question how many labor hours did each set take you and how much would you charge for the boards if you were to sell them? Nice workshop!
@CasualBuilds
4 жыл бұрын
I haven't thought about using 1x4s, will definitely be lighter. The time it takes me to make these things won't really be relevant because I spend a good amount of time with filming.
It seems like there are pretty strict dimensions for the boards. The back is 12 inches off the ground. Is there a set height for the front end? I'm wondering if shaving the 2x4's and sinking the plywood affects the height off the ground for the front of them?
@CasualBuilds
Жыл бұрын
Yes, there are standard dimensions for these. I think they say something about the front end, but can't remember exactly.
@markb8954
Жыл бұрын
Yes. Per ACA regs: Board Top Dimensions: 23½-24-in x 47½-48-in Board Top Thickness: At least ½-in Front Standing Height: 3-4-in Rear Standing Height: 12-in Hole Diameter: 6-in (+-¼-in) Top of Board to Center of Hole: 9-in (+-¼-in) Sides of Board to Center of Hole: 12-in (+-¼-in)
hi what diamiter should the hole be
@CasualBuilds
3 жыл бұрын
6" diameter
I've never done done woodwork before. The math, tools, everything is intimidating. I live in Japan. I first need to find a woodshop with these tools. And go to a tooling department to buy everything. Should I even be attempting this? Seems dangerous for a complete beginnner.
@CasualBuilds
2 жыл бұрын
You need to start somewhere.
What is the most useful tool?
What happens if you don’t have all this fancy equipment?
@CasualBuilds
2 жыл бұрын
You can make cornhole boards with basic tools.
Robert
Creepy music choice
“Casual Build” 🥴🤣
Made way too much work for yourself. Can make the boards lighter by using 1x3 instead of 2x4. On top of that use a 6” hole saw for the hole on the board. Save yourself time & less room for error. Final critique: use a pocket hole jig instead of drilling holes then having to fill with dowels. Also no clue why you routered out the frame for the ply to sit in the frame. Never seen cornhole boards like that.
@CasualBuilds
4 жыл бұрын
1. Agreed on the 1x3s 2. Didn't want to buy a hole saw, since this was a one-time project, the router works just as well 3. Yes, could have used pocket holes 4. Because I didn't want the plywood layers to be visible on the side.
@JesseAdams3
3 жыл бұрын
@@CasualBuilds This looks like a great beginner build. I am just learning about woodworking (I do have a rough framing background). I would not want the plywood edge visible either and love the chance for some rabbit practice with a router.
@CasualBuilds
3 жыл бұрын
@@JesseAdams3 Awesome!! The only tricky part for me was the legs - good luck!