No video
How to make acrylic glass bender || cheap way to make acrylic bending machine By Selftech Projects
1:The wire i used is extracted from a heater spring available at any electronic shope.
2: one side of the wire should be tighten to the screw at one side and another side of the wire should be tighten to a ballpoint spring. The ballpoint spring should be stretched and then attached to another screw as you can see in the video.
3: we use the spring because when the wire is heated, it expands,
4: 12v computer power supply is best for this machine.
5: important thing is. Use 12v plus minus wire at both ends of the wire...not screws..
I hope this would help. Thumbs Up
Please subscribe. ❤️
Пікірлер: 28
Thank you so much for this video. This is the simplest and fastest way to make a diy bender but it works just as amazing!!!! Thank you for sharing!!!
jai ho kalwanti bhai... Jai ho...
@selftechprojects6003
2 жыл бұрын
Thanks
Awesome thanks for information
Untuk buat ukuran 1.5 m kawan nikelin 1 mm , tebal akrilik 2-3 mm butuh power supply yg berapa volt dan berapa Ampere
One important question : how can you tell which is plus-minus wire on the power supply? I have 450W computer power supply with a bunch of wires...
@selftechprojects6003
Ай бұрын
All the yellow wires are 12v Red wires are 5v If there is a white wire,it is 3v All the black wires are negative (-)
@dignitas1980
Ай бұрын
@@selftechprojects6003 Thanks! I`ll give it a try.
What wire is used for heating And what power supply you have used.. plz mention
nichrom wire kitne watt ka liye 1000, 1500 ya 2000 watt ka
How many watt PSU you used? And what type of wire is that?
@selftechprojects6003
Жыл бұрын
i have connected just 150 watts supply and the wire is taken from the spring of a heater.
Bro PSU nya yang berapa Amper, soalnya aku pake yang 12v 1,5 amper kaya yang gak naik.
@selftechprojects6003
2 жыл бұрын
Psu 12v upto 3 amp is enough
12v Hogy or Amp power kitna hona chaheya aik feet ma kitna amp hona chaheya
@selftechprojects6003
2 жыл бұрын
Brother kindly use a computer power supply to provide anough amp. Computer PSU is enough for upto 2 feets.
@selftechprojects6003
2 жыл бұрын
If you need more than two feets than use two PSUs in series to make it 24v. Dont worry nothing will blow Also requested to subscribe the channel bro. Thanks
Gol Aakar me kese kate
Why is the power
@selftechprojects6003
3 жыл бұрын
12v computer pc power supply
Hi, apa voltage guna nya?
@selftechprojects6003
3 жыл бұрын
12v computer pc power supply. Yellow 12v plus Black 12v minus
Tanya om,, itu bok nya bok apa namanya🙏🏻🙏🏻
@selftechprojects6003
2 жыл бұрын
🌹
@mangajay129
2 жыл бұрын
Power suplay
no information given, what a waste!!
@selftechprojects6003
3 жыл бұрын
1:The wire i used is extracted from a heater spring available at any electronic shope. 2: one side of the wire should be tighten to the screw at one side and another side of the wire should be tighten to a ballpoint spring. The ballpoint spring should be stretched and then attached to another screw as you can see in the video. 3: we use the spring because when the wire is heated, it expands, 4: 12v computer power supply is best for this machine. 5: important thing is. Use 12v plus minus wire at both ends of the wire...not screws.. I hope this would help. Thumbs Up Please subscribe. ❤️
@quemeese
3 жыл бұрын
@@selftechprojects6003 thank you for the reply.