That is an excellent idea. Thank you for sharing.

Creative and handy, but there are ready made long nosed flame gadgets available without hustle and risk of bursting fire. In fact, there are so many propane attachments and bits available online that could make a fantastic yet safe project like a breeze. All in all, great job for something to demonstrate as doable.

Excellent!!! Thank you for sharing!

Excellent tutorial...

Awesome but to much time for so short of life in such small canister. Again AWESOME project. Thanks for sharing

@mize_yir_bizz

9 ай бұрын

it works with propane as well, hook it up to a BBq tank and off you go ..

Really appreciate your ideas

nice! work thanks for sharing...😊

Creative idea 👍👍👍

Excellent. Thanks for sharing.

Perhaps make an easy clamping attachment to hold your trigger mechanism to your propane canister instead of having to glue it everytime, that would be better. Overall, it was a good simple build.

Excellent video ! 👍

Awesome! Wanted to make one of these for a while

Awesome diy continue

I had problems with bracelets soldering cause of tiny pieces. Now you solved it, thanks a lot 🙏🏼

This is gold! Thank you Creative! You just helped out so many people getting started on their projects.

Creative is very handy with his hands it must be said - well done fella

Indeed a handy little tool, a longer tube mabe, nice vid

Amazing! Changing the gas canister must be fun😅

Seems like a neat fun project. Don't know if you have limited access to tools or what but here in the states they make small butane torches for as low as 5 bucks. As others said PLEASE be careful... a tip over COULD go very bad.. not saying it will... just saying. Neat little project though!

What glue or adhesive you use on those side screws nice video

It’s missing a flash back arrestor, you’ve built yourself a bomb! 🤯💣☠️⚰️

@AT-os6nb

Жыл бұрын

does FUEL burn/explode without oxygen in canister?

@paulfrost8952

Жыл бұрын

@@AT-os6nb it wouldn’t explode/burn without oxygen, but if the flame goes back down the pipe taking oxygen with it then problems will occur

@frikkiesmit327

8 ай бұрын

​@@paulfrost8952exatly!!

8:00 Nothing gives me more pleasure than watching someone teaching how to hold by hand a piece of wood and throw a drill at it to make a full length hole into it! Safety first, I presume!

Well I must say that was a very very cool little torch you made and I would like to see you do some more things like that do you know about any cool things to do with magnets

Great Idea sir

Great Job. Cool! 👍👍

good idea but you need a gas bubbbler so no back explosion when gas runs low

a smart way to make a quick a small and sharp torch in a survival situation, with easy martials to get 😊then you can always improve it when you come to better materials

Awesome 👍🏻

Thanks for sharing!

Thanks for sharing 👋👍

Be careful I work in the metal industry and often use cutting torches risk of flashback is very high.

@elianele5643

10 күн бұрын

I don't know nothing. Having said that, is there a way to prevent that? I came here in a serie of "DIY hidrogen gas from water" videos and wich they said that to prevent the flashback a guy put ciggarette filters in the pipe, another guy put glass fiber; and another guy put (i think) like... ...(don't know how to say it, i'm from Argentina)... the metal shaving for wash the dishes. Also in all those diy hydrogen they use a second mini vessel with water and air between the hydrogen production and the blowtorch. Could it be implemented in this kind of proyect? Are these workarounds effective?

I love it. Greettings from Argentina.

Thanks for your new idea and tactic nice talent , Norman Wray 😅

سلام..دستت درست استاد🎉🎉🎉

I'm really impressed by this build, great stuff. You're super smart.

It's a cool little device. Should be able to slice right through brake discs with that champ right there. 😄

Sangat kreatif sekali..!

Ah y d wow na wow😂😅

Can use it for brazing copper or cannot...

That's cool, and for all of the effort, you get about 10 minutes of burn time, LOL !

This gentleman MUST be Russian. If not, I apologise. Although it is very interesting, I have concerns over its safety. Commercial torches have flashback arrestors, which do not allow the flame to travel down the tube and into the gas bottle. I did not see such a device on this. If I have missed seeing such a device on this tool, then I must apologise once again. If it is safe then it will be most useful to jewellers so that they can "weld" jump rings, such that closed link chains can be made. Please carry on making these "unusual" items, stay safe so that we can enjoy your work for many years. 👍

@user-vw5jo5xf8h

Жыл бұрын

Гасители обратного воспламенения ставятся на водородные горелки, пропан в трубке не воспламеняется

@lizard71282

Жыл бұрын

Был бы русский, то болт и спицу приварил бы к баллону 😁

@CT-qx8nl

Жыл бұрын

Nobody cares what you have to say

@efrainzuniga5537

Жыл бұрын

He's Russian,Nicaraguan or Cuban.

@rachelpunter1893

Жыл бұрын

Flashback arresters are normally only used where there is an oxygen supply, as there is no oxygen supply that’s why he did not fit one. But considering a jewellers butane torch can be bought for about $40 I would buy one of those and know I was safe.

I will stick with my mini torch...it does the same thing. But, this is pretty cool.

Ficou top!!!!!

The music kept me from wanting to watch the video. Best of luck to your channel.

very good very nice

Well Done....

It would be great if you could add a parts list with the sizes of each piece.

@pook6212

4 ай бұрын

Watch and take notes

Finally a way to rid the world of used popsicle sticks and melt solder into little balls...

Thinking quickly, Dave crafted a butane torch from copper tube, wood, glue, and a butane torch!

@kylemilford5968

8 ай бұрын

Indeed. The only benefit here is flexible head & low profile for tight reaches

I tried it making when I was 15 but I was making burner also but failed due to making smaller holes to pass the gas hole was 0.70mm so gas coming out was not so brilliant, today when I saw it it reminded me of my memories.... Great job but still needs more improvement.... It's not the rugged one....

Great idea, thanks for the video.

فوقالعاده بود🎉🎉🎉

👍👍👍 Bellissimo ,bravo

Да, круто!!! Сварганить из ничего вполне рабочий инструмент!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺

Nice idea

Amazing

Ok prfekt👏👏👏👏👏

So far so good, still waiting for the "metal _ Mini Cutter" part: There is nothing wrong with the project as it is, but I guess click baiting must have become a habit by now.

How hot did the pipe to the nozzle get

Can it be used to braze carbide bit to saw tooth missing the carbide element?

@christopherdickinson4291

Жыл бұрын

Not reliably... it's more about the joining materials than the torch... electronics solder ain't gonna vit it and I don't think butane gets hot enough.

良いアイデアと簡単な方法、サポートします

😮👏👏👏👏👏👏💯 you so cool 🎉

سلام احسن ابداع

Muito bom gostei. 🇧🇷

I feel like a hose clamp instead of glue, would make this contraption easier to attach to the next can of gas. Just spit ballin, not complaining. It's still cool either way.

Good idea

Nice and excellent

I would have the can upside down. When you fill up a lighter you hold the can upside down as it is fluid.

Amazing work brother

Nice bro

Great job. The flame shape is satisfying. I hope you make another video with the same torch but in a way to make the gas cane easy to be changed. I'm pretty sure you know what to do.

@davey2k12

Жыл бұрын

Just make adapter using the top from the gas can doesn't really need to be adjusted so just set it to when ya put top on and if it falls over the top pops off safety cut out

@devolvedspud6101

Жыл бұрын

Use stud iron and nuts to extend over the height of the can, on a wooden base. This would replace the bolts glued to the can.

@davey2k12

Жыл бұрын

@@user-xy7bt8qg8k behave its complete lies like all religeous crap no god needs to make a book

@mize_yir_bizz

9 ай бұрын

I would have the can upside down. When you fill up a lighter you hold the can upside down as it is fluid. You can still use the concept of a clamping device, to compress the Butane but I would hook it up to a BBq's propane tank, it will last way longer and you don't have to worry about bumping it around. Also look into a damping system in case of blow out, the flame gets sucked back into the line igniting the gas blowing up the canister.

احسنت فكرة روعة هل هذه الشعلة تصهر النحاس

Отлично!👍🏻

How long does that tin last lol I'm making one 😂 How hot does the pipe get 👍

Impressive. But needs better mods.

It looks very good, can this flame be good enough for brazing ?

Hi great bit of kit, What was the jet nozzle from please

@souravmaharana2590

Жыл бұрын

Lighter

Love it

Very interesting

Nice..... can't wait to see the show when you have a back flash happen!!!! (btw, anyone watching this don't make one like this guy did! There is no safety feature stopping this setup from back flashing, then..... Boom goes the dynamite all up in your face!)

@SRBrown9032

Жыл бұрын

Absolutely, this is not a safe tool. I've used a variety of torches over many years and I would never use something like this.

Merci j'aime votre technicité c'est genial

aw mate this is awesome thanks for showing me how i can blow myself up but seriously i am quite surprised by this lokks hot enough anyway

is it possible to connect two nozzle ?

Maybe attach the nail and screw to the can with a stainless steel hose clamp.

I couldn't help feeling like I was looking over the shoulder of a bomb maker.

Very nice

👍🏻👌🏻👏🏻👏🏻😃❕ G-G.

temperature mesured?

So what would be the purpose for this little torch? I mean, what would you use it for?

@CT-qx8nl

Жыл бұрын

Litterly hundreds useful things. Like It may be 100% required in manufacturing and repair of Jewelry, soldering, shrinking heat shrink tubing. So many in fact I'm having trouble thinking about it.

Cool😮

Neat!!

no flash arrestor??

It's almost 3rd grade art class with a touch of freshman High School Shop class

Good Job ! 🤩👌💪Not like a most clickbaits with patents that don't work . Greetings From Poland ✋👊

Someone buy this man a drill press.....he'd be unstoppable

I feel like I'm on a list after watching this

браток , это шикарно! Я, с тебя фуею! молодца!!!

what size is the capillary tube for the fire...

I tried using a lighter. But it didn't work. What am I missing?

So creatife and very simple to use the tool