Did anyone else die inside when he spun the tapping tool at 1000 RPM with a power tool 😢

@AlexDiesTrying

Ай бұрын

Nope, I was already dead when it happened.

@J2ricker

Ай бұрын

I died when I saw the tap

@stepanvesely6567

Ай бұрын

Yes!!!!

@Alpine_flo92002

Ай бұрын

Thats an uncoated machine tap. If its somewhere between M8-M10 hole size then you can go from around 320-800RPM for HSS machine taps. About twice that for coated ones and if you are rich enough for a carbide one you can go as fast as the drill lets you go. There are also faster "standard" taps but rare

@JayCox91

Ай бұрын

No don’t think you died either otherwise you wouldn’t have been able to send your comment

Pull it tight counterclockwise. That way the tension will force the bolt to tighten instead of loosen.

@juarezderrick9647

Ай бұрын

That was the only thing I got out of this video 😂

@Professional_Youtube_Commenter

Ай бұрын

i was gonna say it needs a washer or itwill undo itself. but this is clever.

@freeaudiobooks7469

Ай бұрын

Ya, that thin cheap wire will loosen it. 😂

@juarezderrick9647

Ай бұрын

@@freeaudiobooks7469 it 100% will. Have you never used a hot wire fence before?

@jarislamecc

Ай бұрын

@@freeaudiobooks7469it can and it will

Проволоку надо было наматывать в обратную сторону, чтобы она затягивала гайку

@Lapa_xxX

Ай бұрын

Истину глаголете!

@HermanWillems

Ай бұрын

Does putin knows that?

@user-iy4ee3pk5j

Ай бұрын

Да ну, перестань. Не раскрутится же она! (Сарказм)

@xOceanSpirit

Ай бұрын

​@@HermanWillems Путин начальник ГУЛАГа, конечно знает. Приезжай в гости, аппаратаменты выделим.

@DARGO_O5

Ай бұрын

Для этого надо мощнее резьбу в профиле сделать

You realize a tap is hardened steel and could break using it that way and if not wearing eye protection watch out! Be safe!

@ErgensUit1987

21 күн бұрын

perhaps a crap quality tap. But a dormer machine tap will do that easily on mild steel thickness of 3 mm.. considering the pitch thread is around 1.5 and 1.75 if its m12 size. not much to hold....

@SiboBushings

12 күн бұрын

👏 safety first

Why did you make the easy thing difficult?

@junglehusky1453

12 күн бұрын

How is it done then?

@kingsweettea9231

4 күн бұрын

Eye hook with washer and bolt on other side.

Очень люблю такие видео, как сделать полезную и что немаловажно-дешовую приспособу. Вам для этого понадобится шпилька с резьбой, проволока, лобзик, УШМ, минитрактор, цементовоз, кузница и ещё пару мелочей!😂

@penguinkowalski3660

Ай бұрын

Так тут по факту ничего не надо. А если у тебя нет элементарно сверла и дрели то самоделки это не твоё. Другой вопрос что надёжность данной резьбы оставляет желать лучшего

@anatolyshestakov764

Ай бұрын

Там и к сверлу вопросу. Дешманское не переживет массовой работы на всем ограждении. А хорошее стоит, как чугунный мост. Ну и просто нормальными саерлами приятнее сверлить.

@user-xj2rb2zq4u

Ай бұрын

При нагрузке на этот натянутый трос , шпильку загнёт нахрен через пару дней статической нагрузки.

@user-ez2ey3ml1x

Ай бұрын

Особо понравилось нарезание резьбы шуриком.

@user-yd5hm8eh3t

Ай бұрын

А нахуя это надо?

"The kids love walking into the into the wire in the middle of the yard for no reason"

толщина стенки сколько 1,5-2мм? Проще засверлить и приварить гайку, надежней будет😉.

@user-ws8mo2bo5d

28 күн бұрын

И резьба х1.5 или х1.75 . Смех и только .

@user-ww2yg2jf3d

27 күн бұрын

Комментарий здравого человека !!!👆🏻👍🏻✌🏻

@yaforgot6778

24 күн бұрын

Он бы еще в листе бумаги нарезал резьбу 😂

@user-vm7yh6vi5t

22 күн бұрын

Для легкой ....и даже средней натяжки струны в 1.5 миллиметра, этого более чем достаточно на ближайшие 15- 20 лет( скорее сгинет проволока )

@drug.cheloveka

13 күн бұрын

Не проще. Сварки нет.

Проще просверлить насквозь и поставить 2 гайки и не морочить руки нарезкой резьбы в тонкой стенке

@user-vp1fh4ej9l

Ай бұрын

Стенки стянет

@vc4172

Ай бұрын

​@@user-vp1fh4ej9l В кода трос потянет, то стенки растянет

@AndreasStopper

Ай бұрын

Das ist so richtg , überleg doch mahl , wie willst du eine zweite Mutter den anbringen bei eim einen solchen Proviel du Schlaumeier !!😅

@Bbkn156

Ай бұрын

Эгершельд шляпа

@ATeaGod

Ай бұрын

может быть, трудно заложить гайку в забор?

Straight flute tap in a drill.....dont bother asking to borrow any of mine....

@swaggerdo7231

Ай бұрын

Bingo. I recoiled watching that.

@user-uq8td5gv3s

Ай бұрын

оаровецплацкцыав

@DoubleBob

Ай бұрын

It worked as intended and there were no problems. Why are you complaining?

@mikeharris6335

Ай бұрын

@@DoubleBobbecause that isn’t how you use an expensive ass flute tap. Believe it or not there are right and wrong ways to do things…

@DoubleBob

Ай бұрын

@@mikeharris6335 What went wrong there? What happened?

Зайчик! А ты ёлкой дырку десяточеу просвердил и резьбу М10 нарезал? Ай молодец... Я у мамы починил! 👍

Wind the cable the opposite way so it pulls the bolt tighter

@dagansmith5354

Ай бұрын

holy crap I was yelling at my screen over this... this whole thing make me sad inside hahaha

@Cheezwizzz

Ай бұрын

@@dagansmith5354 Great minds think alike 💪

@swaggerdo7231

Ай бұрын

Incredible observation. Kudos.

@iggysixx

Ай бұрын

Yes! Thx - I was breaking my brain for a minute there... _("Something.. Is... wrong... here...... Damn you, brain!")_ Second thing is that the inside of that slot won't be galvanized. Unless it's a stainless bolt, it'll rust through in no time at all.

@JoeGator23

Ай бұрын

Using the nut to lock the threads does not help the fact that this tiny and unbalanced threat is going rip out far faster than a peg that goes through both sides of the post. This design is a weak joint prone to failure under force here.

The threads will pull out when you tighten the nut. The allthread is already sagging. In any case, you drilled the hole to big, the tap barely did anything, hence, little to no metal bur in the tap. Great method though, wrong drill bit.

@Disinterested1

Ай бұрын

was looking for this comment! awaiting seeing this on a different channel with a real engineer! lol

@XXXCRSPL

Ай бұрын

Lmao ok

@noneya61

Ай бұрын

Well, he just proved you wrong slick…

@bogeyman-bv4wg

Ай бұрын

Opinions vary

@kosmotto

Ай бұрын

he tried, It wont last but he at least did way better than most He wuld have done better if her went all the way thru.

High quality steel might be expensive but with the right know-how and tools it's a worthwhile investment.

Tighten the cable up more so that when the threads rip tf out it'll do some real damage 🤩

@nigelthornton7378

11 күн бұрын

😂😂

The length of threased rod where the wire is attached makes the lever action at the bolt threads increase dramatically. It will pull out on its own when the wire gets cold and shortens.

@tomg1066

Ай бұрын

On top of such bolt size (Threads) in that thin of steel...

@StoneyBaloney69

Ай бұрын

Dude it's meant to be an awful idea on purpose. so people like you comment on the video because more interaction leads to the algorithm feeding the video to more people. It doesn't matter if it's negative interaction it still works the same. 😂

@user-jo4rr8xz2g

Ай бұрын

🎉1000T❤😂😂😂🎉

@checkamilosevic5927

23 күн бұрын

exactly!

@Freight_Train

19 күн бұрын

@@StoneyBaloney69 Good point.

Wind the wire counter clockwise so it doesn't want to come loose. That lock nut will not stay tight forever

Мало витков резьбы. Нужно было использовать резьбовую заклепку. А еще для нарезки резьбы нельзя использовать электроиструмент, по крайней мере на высоких оборотах.

An over sized hole with loose threads what could possibly go wrong?….

@brnzhut

Ай бұрын

shear force other than pulling, should be fine.

@Mega_Tron6891

Ай бұрын

And a wire under tension lol

@fragglefknrock7568

Ай бұрын

@@brnzhut shear force isn't the problem here.

@holywells

Ай бұрын

Hmmm, no cutting oil, huh??

@fragglefknrock7568

Ай бұрын

@@holywells he put some on the outside of the hole but not really in it well. I didn't see him put any on the tap. Thank God he's not tapping steel.

Для резьбовых отверстий свои диаметры отверстия идут , они редко совподают с целыми числами

If u don’t have the correct size bit best bet would be to drill through both sides and put nut on both sides once tight

Я тоже хочу сказать,что прочность конструкции прямо зависит от толщины стенки квадратного профиля

В струнных карнизах этот механизм прочнее, надёжнее, и даже дешевле.

Намотал проволоку усилием на откручивание шпильки, лучше проволоку в другую сторону мотать.

@Adnreus74

Ай бұрын

Да там пофик в какую сторону. Шпилька держится на одной нитке, при этом рычаг мама не балуй. Малейшее усилие на проволоку, и вся эта конструкция разваливается.

You don’t need to mark a step up bit to know when to stop drilling. Just pay attention

@Tips_Workshop

Ай бұрын

👍🤝

If you get a pair of pliers or even two, you can bring them with you instead of always going to the "wire pole" for projects

I don't have ratchet bolts on my fence. Does anyone?

@bluestreak3864

Ай бұрын

I Looked In My Garage I Couldn't Find Any That Clicked

next day rusty, next week unscrewed 😅

@Steve-sg3uz

Ай бұрын

That can be mitigated with a thread locker.

@swaggerdo7231

Ай бұрын

hahaha, that's a good one.

The fact that it's hollow is why I might tap with a drill. I would advice not using a fast power tool to tap with. But in something like this it should work out. You're barely cutting any actual threads and it's not gunna bottom out and snap.

How do you get the little bell to ring after tightening the bolt?

Законтрить на краю шпильки две гайки между собой,ключом держать за внутренюю и закрутить гайку у трубы.

А можно просто использовать талреп

@dgungar4380

Ай бұрын

Это слишком умное слово😂

@Pike1pacifist

Ай бұрын

Я со стропальщиками, однажды, на стропилах, на стройке, слушая рэп, пил до талого, но даже они не знали что такое талреп...

@DUDENOFF

Ай бұрын

Ну когда его нет под рукой, но очень надо, тогда так :)

@TIGwelderprof

Ай бұрын

​@@DUDENOFFну если нет талрепа то у любого точно в хозяйстве есть шуруповёрт, сверло, мечик, болгарка, болт или шпилька, гайки, ключи и даже стяжки, но талреп это роскошь😂

@user-op9fv5ss2b

Ай бұрын

​@@TIGwelderprof Метчик!

This is actually one of the first useful things I’ve seen on KZread most take 100 mins at 195$ an hr for a 37$ tool 😂

Leave the tail longer. When you are done tightening, wrap is round the taught wire, now the nut is not needed to keep the wire tight.

A second nut, on the end will completely prevent the wire from working loose.

@Tips_Workshop

Ай бұрын

👍🤝

@XXXCRSPL

Ай бұрын

It's not going to work loose it's under tension

@majormanfredrex

Ай бұрын

@@XXXCRSPL With high winds vibrating the wire over 70% of the time and frequent seismic activity in our area, we don't take chances with our fences. We also use non-slip locking washers on any locknuts too.

@tobyngenn9826

Ай бұрын

​@@XXXCRSPLit will come loose, safety wire is done like that but the opposite way, I do it every day for work

@SparkyDad

Ай бұрын

This trash channel replied to you like ‘Thanks brother I never thought of that!’

Поволку нужно крутить в другую сторону. Против самовыкручивания!

@hedgehogfog4622

Ай бұрын

😂😂😂что в лоб, что по лбу! Куда не крути, проволока будет действовать в обратную сторону.😅

@tvbox1A95xf2

Ай бұрын

​@@hedgehogfog4622но будет закручивать шпильку а не выкручивать

@hedgehogfog4622

Ай бұрын

@@tvbox1A95xf2 каким образом? Шпилька по часовой закручивается. Натяжение происходит путём ЗАКРУЧИВАНИЯ шпильки. Трос тянет в обратную сторону. Вы это видите по-другому? Как? Даже, если трос заводить снизу шпильки, тянуть он будет в противоположную сторону - откручивать.

@alexanderandreev9463

Ай бұрын

@@hedgehogfog4622голову включи, ооооочень сильно помогает. Закрутил шпильку БОЛЬШЕ чем требуется, вставил проволоку, ВЫКРУТИЛ шпильку, законтрил гайкой. Теперь, когда проволока будет тянуть, она будет сама закручивать шпильку. Если тебя напрягает, что проволока пойдет в итоге снизу шпильки, просто отзеркаль и делай в обратную сторону, чтоб проволока тянулась не слева направо, а справа налево.

@hedgehogfog4622

Ай бұрын

@@alexanderandreev9463 😁успехов, головастый! Гладко было на бумаге🤣

Здрасьте, я у мамы инженер.😂😂😂

@Tips_Workshop

Ай бұрын

😂😂🤗😉

Ну с натяжением всё понятно, а вот на ступенчатом сверле на сколько мне известно диаметры стандартные (4,6,8и тд), а для нарезки резьбы используют сверла немного не стандартные (см таблицу метрических резьб ) обычно это диаметр болта, шпильки минус шаг резьбы. Есть таблицы в которых указан диаметр сверла.

That would be a great idea for running lines for tomatoes or beans a nice tight line to hold the fruits

Для этого, давным давно,придумали талреп.

@---lm9zl

Ай бұрын

они дорогие...если на виноградник то оч затратно..

@alexanderlevin8116

Ай бұрын

@@---lm9zl, зато экономно по времени. А так вы вместо быстрой натяжки проволоки будете 100 шпилек болгаркой пилить

Be careful running that’s tap in with a drill

@shotgunsniper1530

Ай бұрын

yeah never use a drill to tap a hole... Always use an impact gun

@Letsgobrandon.2024

Ай бұрын

@@shotgunsniper1530Yeah, because an impact gun would be less likely to snap the tapping bit 🤦🏼‍♂️

@bootywarrior5842

Ай бұрын

@@shotgunsniper1530crescent wrench lmao

@fragglefknrock7568

Ай бұрын

Double lever hand tap and or a triset tapping tool handheld would be fine too.

@lastchance8142

Ай бұрын

A channel full of "Purists" here. I tapped with my drill for years. Just put the clutch down low, like 12. Below #10 screw, best to do by hand.

With the zoo in the background, I could probably watch this all day.

@Tips_Workshop

Ай бұрын

👍🤝❤️

Just your hands, a steep bit, a tap, a drill, a grinder, & cut off wheel. 😊

With the dissimilar metals and ambient temperature differences throughout the years, the wire, nut, bolt and post will eventually disconnect, oxidize and degrade into their separate parent constitutes.

Not sure exactly what he's up to but when I string wire I have a puller (sometimes called a wire stretcher).

You could also trim it down and put another nut on the end to clamp the wire in place.

Меня настораживает метчик в шуруповерте. И нарезание резьбы без смазки, порвет же на таких скоростях.

@user-jx4lq1lo4o

Ай бұрын

1борот в металле должна быть смаза маслом

@penguinkowalski3660

Ай бұрын

Меня вообще настораживает резьба в полтора витка.

@Shishigovec

Ай бұрын

Он же маслом смазал

@user-md3rb8zi2f

Ай бұрын

@@Shishigovec токари не веретенку используют. Да и два витка резьбы....

@nuntana2

Ай бұрын

Watch again. He applied cutting compound and there is nothing wrong with using a battery drill as a tap wrench in galv metal. Just go slow on clutch setting and back it off. What is slightly disturbing here is that tread will rust after it was cut.

Сколько курток уже порвал ? 😀

I would have screwed up the bolt when he put the slit in it for the wire.

One thing I learned in this video...always lube the hole first .

Todo mis respetos para este señor

Можно было резьбовую клепку поставить, надежнее было бы!

@siemax16

Ай бұрын

так-то можно и крючок приварить, кольцо прикрутить, талреп повесить, да чего только нельзя сделать :D суета ради суеты, шпильки пилить

@user-zy5pv8be8y

Ай бұрын

@@siemax16 согласен, можно сделать что душе угодно

@promrdanich

Ай бұрын

На суперклей примаздюкать.

@alejandromiguel3063

Ай бұрын

😅😅

If only there was something I could buy from the hardware store that could do this.

@youdosuck

Ай бұрын

If only

@MisterMick113

Ай бұрын

Right? Works way better than this contraption as well

Yes anytime you find yourself grinding a bolt you know you must be doing something right

Actually the tapping tool contains 3 tools for each size become sharper he only used 1 that will never stay sharp

My soul just died when he used that tap.

@Rick-zs1rn

Ай бұрын

My soul just died when I watch this video.

"with your own hands" Uses electric drill, electric angle grinder! And don't let it stick out as far and put a cap nut on! Like you did it it'll hurt someone.

@_PIVOZAVR_

Ай бұрын

😂❤🎉😢😮😅

@jarradblair1793

Ай бұрын

Like the neck high garrot wire, isn't the main issue here😂😂

If you turn the stool upside down, you can fit 4 life hackers on it

Step drills are awesome.

Не надо до доктора дью отправлять однозначно,,,Динисыч,,,

Don't waste your time. Hire someone that has half a clue.

@michaelschemmel1984

Ай бұрын

No thats called wasting money

You never EVER tap with power tools. Only hand tools.

Если перевернуть стул, то на него можно посадить сразу четырех лайфхакеров😊

Сомнительная конструкцыя. Там резьбы два витка. Сельнее надо натянуть чтобы когда вирвало болт то наверочку. 😂

@Lavar178

Ай бұрын

Два если тройка, а у меня сомнен

@MrNAchFIN

Ай бұрын

кроилово ведет к попаданию. Талреп 200 лет используют, но нет, надо же куда-то свой гениальный ум приложить)))

You dont use taps in screw guns, unless you like buying lots of taps.

Of course, i just need to buy all these tools...!!!😂😂😂

You just taught me so much in 30 seconds

@Tips_Workshop

20 күн бұрын

🤗👋🤝

And the ratcheting flat bar..

Who comes up with these so called hacks? Idiotic and much easier ways than this!

Do American drill bits go the opposite way then because over here, they turn to the right goin in

I love those bits!

The zip tie works. I just use a marker.

@michaelryan7715

Ай бұрын

It’s a step bit you don’t need to mark it duhh

Never ever use a tap in a power tool

@20kilovolt

Ай бұрын

For this channel it doesn't really matter if you use a pipe wrench as a hammer or a screwdriver as a chisel. This channel has only one purpose and that is to upset people who respect the quality for which a specific tool is made.

@JohnSmith-dp2jd

Ай бұрын

Do people actually believe this? Do they think all the threaded holes in their engine block are hand-tapped or some bs like that?

@MisterMick113

Ай бұрын

Some people don't understand physics. For those of us who live in the 21st century and understand physics, power tapping isn't an issue as we understand taps break from uneven force.

This is brilliant!!! Who thinks this up?

Никогда не начинаю сверление ступенчатым сверлом: если что-то случится с кончиком, то, либо сверло на выброс, либо, если умеешь, перетачивать под сверление до следующего диаметра

What's the point of the nut when it loosens the same direction as the bolt? Surely if it was to come loose they'd just unscrew together in unison? To me it seems the nut is only useful if there's something the other end of the bolt.. or have I missed something?

@Vincerama

Ай бұрын

Since the hole is threaded, the bolt threads in and then the nut acts like a lock nut, putting pressure on the bolt so it won't back out. ie; the nut, when screwed in against the steel surface pushes against it, and also pulls the bolt, thus helping to keep it from rotating out.

@edhayenga

Ай бұрын

It’s a jam nut goober

@bwpeycal1639

Ай бұрын

You missed something.. how a thread and nut works 🤦

@micaheller6426

Ай бұрын

@@VinceramaI would opt for also using a lock washer but that’s just me I guess

@87dsz

Ай бұрын

Go look at how a tie rod end on your car works.

Хрень, талреп в помощь

@talibanmx

Ай бұрын

Algo no cuadra el taladro gira al revés cuando están perforando, donde venden esas brocas y machuelos izquierdos para ir a comprar

Fantastic, i need a few in the office........

Always use the hand tap. The drill will break it almost every time.

@Tips_Workshop

Ай бұрын

👌🤝

all you had to do was wind clockwise and it might actually do something useful.

A tread that's 2 mm long, I wouldn't trust that so much.

@MishaTUK

Ай бұрын

Столько сил и средств потратить, зачем? Напрашивается только один вывод: леплю хуйню ненужную лижбы сцуа в тренд нахуй тут лайк ставить обсалютно бесполезная хуйня

@sokantnevesti603

Ай бұрын

Depends what you use it for, and actually in this case, you can't count just the threads in pipe wall, a nut counts too. In fact, without nut and pipe threads being tight, nothing happens. I hope you understand how this is not a 2mm thread connection.

Should always pre-drill a small hole before using a step bit.. the end will be dull in a week

Use the right size tapping drill, some lubricant and a tap wrench! Rough!

Please no one use this idiotic tip

i haven’t used a tap to often but i’ve always heard and been told never use a tap on a drill but for what he’s doing i think it’ll be fine

No. At this point drill all the way through and back up with a nut washer and tension ring those threads won't work.

The only think wrong was not to counter sink the drilled hole, which would eliminate the burr left from tapping, he put oil on the hole which is ok, tapping at high speed is the way to go. Fewer broken taps, this is soft steel, no problems here.

@Tips_Workshop

Ай бұрын

👌🤝👋

@pictsidhe6471

Ай бұрын

Step drills automatically countersink.

@josephmmohar6423

Ай бұрын

@@pictsidhe6471 It sure looked like a burr when he put the oil on the hole, using a step drill doesn't ensure that the hole is the right diameter, never seen a step drill used on welded, polished S.S., l know this is soft steel so for this application obviously this method works.

I've never seen a screw tap used in a drill. Also you drilled the hole too big. Also you should wind it the other direction so it pulls the bolt tighter

En TODAS las ferreterías ya venden desde hace muchísimos años los "TENSORES"... Muy económicos y muy efectivos para tensar cualquier tipo de cable o alambre..

don't forget to use a washer with the bolt they are important

@Tips_Workshop

Ай бұрын

👍🤝👋

That will stay tight for at least 10 minutes. Assuming you can actually get it tight with that thin bit of metal. My tip, just but an eyebolt cheapskate. No grinder required.

You fucked RHS strength of that seamless column!😅

Thin walled tube like that will buckle under proper tension. Keep it shorter, for less leverage & wind the other way. Do not thread with power tools...... Otherwise Perfect 😊

@Tips_Workshop

29 күн бұрын

👌🤝👋

I don’t know how I got here, but I will carry this random information with me for the rest of my life.

@Tips_Workshop

25 күн бұрын

🤗😉👋

Depends on how much tension you want. I still see a kink in the wire

Shoulda put a lock washer on before the nut.

@Tips_Workshop

Ай бұрын

👍🤝

The best way is to wrap it the opposite so it doesn't loosen itself. Same thing with ptfe tape

Ive been on the internet so long my first thought was 'oh they the put them on drills now?'

@Rick-zs1rn

Ай бұрын

😂

The safety wire is going the wrong direction. Secondly, you should tighten the bolt THEN safety wire it

Also put another nut on the end to stop the wire pushing out

@Tips_Workshop

Ай бұрын

Yes bro, that's a good idea 🤔👍