Using a stop block is much more accurate and much more easy instead of establishing a line every time. Great video!

@LynnLaceyLLWW

5 жыл бұрын

Very good idea as some others had pointed out. I don't know why I didn't use a stop block. Sometimes you get so focused and closely involved with your initial thought process and your desired result I blind myself. Thanks for the comment.

Beautiful blank, Excellent tutorial, great video.Thank you ,Bob

@LynnLaceyLLWW

8 жыл бұрын

+RJBWoodTurner Why thank you sir! I appreciate it. Thanks for watching

Really well described and demonstrated. Thanks for sharing the techniques.

@LynnLaceyLLWW

7 жыл бұрын

+Andrew Moore You are welcome Andrew thanks for watching and commenting.

Great tutorial! You have definitely inspired me to try this scalloped design.

@LynnLaceyLLWW

6 жыл бұрын

Thanks for watching and good luck

Simple, clear, inviting. Lévis

@LynnLaceyLLWW

8 жыл бұрын

+Lévis Madore Thanks again, I appreciate you watching.

Much appreciate you showing how to do this.

Great Technic, Lynn.Thumbs up.

@LynnLaceyLLWW

8 жыл бұрын

+OG Timbercraft Hey there Orley - Thanks

Thanks for the demo it has many more ideas with my turning. Thanks again.

@LynnLaceyLLWW

5 жыл бұрын

Thanks for watching Troy

Thank you VERY much. Never to old to learn a new trick.

@LynnLaceyLLWW

7 жыл бұрын

+Richard Ray Thanks for watching I appreciate it.

Thanks for sharing the know how. I'm just getting into segmenting and will definitely be doing some scallops.

@LynnLaceyLLWW

5 жыл бұрын

They are fun and good luck

Your teaching process is excellent. Very clear and understandable. I will try this tomorrow. Cheers........Bill

@LynnLaceyLLWW

8 жыл бұрын

+William DeVerna Thanks Bill, send me photos of results, I'd like to see them.

I've just started turning pens and this is a beautiful idea for something slightly different. Excellent video, thanks very much

@LynnLaceyLLWW

8 жыл бұрын

+Kevin Kirk-hailey you are welcome Kevin and thanks for watching

This is super cool! You were very patient...

@LynnLaceyLLWW

7 жыл бұрын

+wbarnett22 Thank you, patience is almost a must. Thanks for watching

Thanks a lot Lynn I had an idea on doing this very thing you just show me a far better and easier way than I had planed to do it. again thankyou. I have just subscribed cant wait to see more. I just love the look of segmented pens

@LynnLaceyLLWW

8 жыл бұрын

+steve lowe Thanks Steve, I hope it helped. I've got some other segmenting techniques coming in May and June that I think you'll like. If you haven't already check out the 2nd video of the "A Pen Maker's Canvas" series. Thanks for watching, subscribing and commenting. Regards - Lynn

Great tips ....going to have to watch quite a bit more before I try this one.....very nicely done sir

@LynnLaceyLLWW

8 жыл бұрын

+Robert Evans Thanks Robert - just take your time and it isn't as difficult as it first appeaser. Thanks for watching.

awesome pen Lynn thank you for sharing im gonna have to try that one.

@LynnLaceyLLWW

8 жыл бұрын

+Rod Jaworski Thanks Rod - send me a picture of what you come up with, I'l like to see it.

First time watcher. Nice job well explained. Thank you, will give it a try

@LynnLaceyLLWW

5 жыл бұрын

Thanks for taking the time to watch I appreciate it. Good Luck

have seen this type of segmented blanks, was wondering how they were done.Now I know, Will have to give it a try. Thanks for the clear, easy to follow instructions!

@LynnLaceyLLWW

8 жыл бұрын

+Barrie Hanold you are welcome, thank you for watching and commenting. Let me know how yours turn out. Regards

Great video. Learned something new. Thanks.

@LynnLaceyLLWW

7 жыл бұрын

+Edwin Leach Thanks Edwin I hope it was helpful. Thanks for watching.

Very nicely done. I enjoyed the video!

@LynnLaceyLLWW

7 жыл бұрын

+Jim Hinze Thanks Jim I'm glad you tuned in. I appreciate it.

hi loved the idea for scalloped pen i have not long started to make pens you are very inspirational for pen turning with great ideas and tutorial videos thank you : )

@LynnLaceyLLWW

3 жыл бұрын

Thank you Neil

Maybe you could make a stopper so you won't have to worry about the lines. I'm definatly gonna try this. It looks realy nice. Thanks for sharing it :)

Thanks for sharing 👍

@LynnLaceyLLWW

3 жыл бұрын

You are welcome

Lynn, great video. How thick is the aluminum you use? How does it affect your tools when turning it? Thanks.

Lynn -- Thank you for an interesting and instructive video. You made the process easy to understand. One suggestion: You might consider flipping the orientation of your camera, so that it captures the action "upside down". That way, when viewed "right-side up", we'll see things from your perspective. That way, when you draw a number on the blank (for example), it won't be upside down to the viewer.

@LynnLaceyLLWW

8 жыл бұрын

+David Walser LOL - I actually filmed it upside down but flipped it in editing. Next time I'll consider your thought and see how it looks. Thanks for watching and commenting. Hope you got something out of it.

great video, one comment/question, why not use a stop block on the sled to register your cuts? i do that all the time to create celtic knots. your scallopped ends would be great to replace a centreband on a slimline or euro roundtop type pen!

Best wishes Lynn. Hope you are doing well.

Thank you Lynn for your tutorials. They are a pleasure to learn from. In this video, you turn the blank to 5/8" before drilling for the tube. Do you think it matters if you drill and glue in the tube first, then create the 60 degree chamfer and turn between centers?

@LynnLaceyLLWW

3 жыл бұрын

Probably doesn’t matter thanks for watching

Ho iniziato adesso a costruire penne e grazie ai tuoi video sto imparando parecchio, complimenti per le tue realizzazioniveramente ben fatte grazie per averle condiviso con noi.ti sento parlare di materiali come alluminio ,ottone ma io non so perché non riesco a trovare una colla corretta per l'ottone,puoi darmi qualche suggerimento? Grazie

Very good teacher sir very nice work :)

@LynnLaceyLLWW

8 жыл бұрын

+TJ'S WOODWORKING SHOP Thanks TJ, always good to hear from you.

@TJSWOODWORKINGSHOP

8 жыл бұрын

Lynn and it's very good to hear from you too sir :)

@LynnLaceyLLWW

8 жыл бұрын

Thanks TJ

@tomasrosas3474

7 жыл бұрын

Lynn Lacey excellent video question were i can buy pen kits

Hi Lynn, Found this video on the recommended list. I've just posted my 50th video which was a segmented pen. I would love to know what you think. Take care Lynn. Cheers, Huw PS Just re-subscribed as KZread had, for some reason, un-subscribed me from your channel. This has happened quite a few times. Huw

Nice

@LynnLaceyLLWW

5 жыл бұрын

Thanks Karl

Hi there. You mentioned gluing Aluminum to the blanks. What glue do you recommend.

@LynnLaceyLLWW

8 жыл бұрын

+James Bennett James I use Locktite 5 minute two part. epoxy. Thanks for asking

Lynn, very good video. One question. Any reason one couldn't set a stop block on the sled when the first cut is made so that each side is guaranteed to cut the next 45 at the exact same point? That way you wouldn't have to draw the reference line and eyeball it with each cut. Just wondering if that would work. Thanks again for a great video!

@LynnLaceyLLWW

7 жыл бұрын

+Kevin Miller Hello Kevin, that sounds good but I've never tried it. Let me know how it works for you. Thanks for watching.

@gs121002

6 жыл бұрын

My thoughts exactly, Kevin.

Very interesting process. What is the marker or pen you used for marking. It looks unusual to me. Also if I could offer a suggestion about your logo on your sled, I would reverse it so it shows up right side up on the video. It always pays to advertise.

@TJSWOODWORKINGSHOP

8 жыл бұрын

+Brian Binns The logo on the sled is right my friend good eyes :)

@LynnLaceyLLWW

8 жыл бұрын

+Brian Binns Hey Brian thanks for commenting, I picked up that pencil at Lowes, it is a Dixon REACH with 5.6 mm lead with a sharpener in the cap. Pretty handy.

Can you show how to continue up the blank with pattern, making a almost fish scale look?

@LynnLaceyLLWW

6 жыл бұрын

It will be a while before I can do that but you just keep repeating the process until you have a blank long enough. Thanks for watching

Do you rough up the aluminum up?

@LynnLaceyLLWW

8 жыл бұрын

+James Bennett yes sir I believe that is mentioned in the video

@LynnLaceyLLWW

8 жыл бұрын

+James Bennett I scuff it up with 220 and clean it with denatured alcohol to remove any oil

How can I get to the video to make your cutting jig

@LynnLaceyLLWW

3 жыл бұрын

Thanks it should be on my channel, if I remember it is a two video series

You can turn aluminum?

@LynnLaceyLLWW

5 жыл бұрын

Absolutely - good luck and thanks for watching

@jpjp9111

5 жыл бұрын

@@LynnLaceyLLWW Oh cool. Thanks. Do I bind it to the wood with wood glue as use the same tools just like any other piece of wood? Sorry for the questions. I'm new to this.

I get a 404 Page Error with that URL.

if you want to know how to make it yourself, just go to woodprix website.