Well. It needs to be measured and cut to the correct diamiter for wavelength. Usually quarter of wavelength

Amazing work 0:59 wtf! A simple scissors can cut that hugh metal, i cant do it with bottom tuna can, i need to buy special metal cutter scissors 5:32 i use internet tv cable (directv, tivo, etc) instead of that and it works very well (50ohm too) and i wind the end of the cable forming spirals so as not to use a usb wifi adapter, I only detect the signal with the internal card of my pc, 6:38 i do not weld, I tighten the cable with a bolt and nut, there are things that are unnecessary but the result is more beautiful, i made a gun antenna, a riffle antenna and a yagi antenna, greetings overthere

@TQDGGamer

6 ай бұрын

Is that useful? It works? Did U just copied the same thing as in the video?

Need a list of all items to make this work.

With all the solder blobs and long leads it will never work for that reason alone , remember its in the GHZ range

Ohhhhh...how quaint! A cut of the camera between plugging in the USB cable and showing how many WiFi access points became available using the new "Long Range WiFi Antenna".

@kransurfing

7 ай бұрын

There are many videos on this you can look around. Why is it so hard to believe, you already have a weird bar shaped antenna on your roof that can recieve TV signals from many km!!! Search disc yagi antenna and you'll see

Let's see you to get that working without the radius to the feed point. Matching problems anyone?

thanks for the creative idea

@zhanucong4614

Жыл бұрын

I am going to hack every wifi in neighbourhood

This won't work very well, the driver element needs to be electrically isolated from the reflector. It is a short circuit !

@edfrhes

2 жыл бұрын

Which one is the driver element, the solid wire?

@RobertSmith-tq6mf

2 жыл бұрын

@@edfrhes yes, but the wire sticking out is just because he didn't cut it off. The disk is the actual driver.

@corel965

2 жыл бұрын

To be honest i built this a year ago and it was working, but i agree with you that should be some more steps to isolate wire in center of cable...do you have any ideas for best solution i still have antena somewhere i think to test it...

@Graeme_Lastname

2 жыл бұрын

It's not a short at 2.4 GHz or is it supposed to be 5GHz?

@RobertSmith-tq6mf

2 жыл бұрын

@@Graeme_Lastname look at a commercial yagi, the driver is always electrically isolated.

why did you cut the video at the end when you put the usb in then cut then all the wifies come out very sctachy i think you put another store bought antenna

Mr you sell this product ...

مبدع كعادتك هل لديك طريقة لزيادة إشارة الهاتف الريزو في المنزل لأن برج التغطية بعيد

@faroukabr4124

5 ай бұрын

يوجد جهاز في علي إكسبريس إسمه 4G Booster

How it works if 2 wires contact each other? He didn’t use any shield to separate those. I can’t trust that

@oprekboy9693

Жыл бұрын

I think that is folded dipole design, msut check the impedance..

@tougmaedouard1123

5 күн бұрын

thats trust short circuit

Wow.. thanks this diy ideas.

@Graeme_Lastname

2 жыл бұрын

Errrr. Some dimensions, which are critical, just aren't mentioned. So guess them?

donge usb to cable lan - router how sir? what work?

sar yah work Karega kya

Hhhhh moroco 😂😂😂❤❤❤

Mhz???

Where is the element isolation

You tecnic is of fallsh

It is work on mobile phone?

he already lost 1 tower in his laptop

It is a short circuit

Why are there certain spaces between the metal discs

@hamzafaisal7134

Жыл бұрын

For resonance

How is this a how to if you don't say a word.. and don't tell me you don't got a mic

إشارة ضعف وأي

Quick question: is this legit?

@micio_meow

2 жыл бұрын

Nope, there's a cut at the end

Не работает это хрень.

@user-od4qh3jw2c

Жыл бұрын

Работает

How to contact you