To everyone that says that it won't work: In america you obey laws of physics In soviet Russia laws of physics obey you

@Fernando-sd6xt

4 жыл бұрын

This is Ukraine, tho.

@peterzingler6221

4 жыл бұрын

@@rwbmal funny enough it will not work anyway. It's kind of a circular yagi

@hans8905

4 жыл бұрын

No. In the motherland Russia, the physics obeys *us* !

@gordslater

4 жыл бұрын

@@peterzingler6221 ohyeah? www.researchgate.net/figure/a-Design-of-the-disc-Yagi-antenna-b-Layout-of-the-antenna_fig4_328659481

@isleofmann1088

4 жыл бұрын

Kinda stupid. Lol!

Glad this channel gets an English translation.

@Justin-lf1fs

4 жыл бұрын

It’s being translated??

@LoganT547

4 жыл бұрын

It is called "Kreosan *English"* for a reason.

@max_ishere

3 жыл бұрын

Not glad that they kept the original voice. I'll just go watch the original.

@MrJohnjimmy7

3 жыл бұрын

So grateful!

@konstkarapan6170

3 жыл бұрын

@@Justin-lf1fs yes and unfortunately the original one, which is in russian i think, has more videos

Love that green car !

@myotherusername9224

4 жыл бұрын

ON the door, it says: "TO BERLIN !" (obligatory nod to the Great Patriotic War); this is the spirit that got them there.

@goclunker

4 жыл бұрын

Simon Østergaard you love a zaz fiat knock off?

@stoatrepublic

4 жыл бұрын

That car has character, love the suicide doors...

Ah, remember 2004 when no one secured their wifi?

@justusjonas8506

3 жыл бұрын

good old days

Me: I'm going slee... *kreosan gives a video* Me: OK, maybe not.

@LoganT547

4 жыл бұрын

Literally me rn 😂

@SufiWhoo

10 күн бұрын

Fr it 3.20am for me😂

Bolt length -1/2 meter Small disc distance- 22 mm Last 3 bigger disc distance- 12mm,9mm and 7mm respectively

@fernandoadauto5354

2 жыл бұрын

The material of the discs, what is it?

@gustavoenriquejimenez8098

Жыл бұрын

@@fernandoadauto5354 Anything metalic

@mohamed_rf9551

6 ай бұрын

What's the name of the connector between the cable and the WiFi adapter please 🙏

@energydrinkdose7585

4 ай бұрын

​​@@mohamed_rf9551looks like SMA or RP-SMA

Kreosan, I love your projects, and I'm really pissed off about the people calling this fake. Apparently they've never seen a disc-on-rod wave guide and don't recognize a Yagi with circular polarization. Thanks for this video. I was going to design my own but you've saved me the trouble. And BTW, your translation called your insulator a "gasket" and now everyone thinks the reflector and driven element disk are shorted. Your biggest problem is that your audience is just ignorant and can't figure things out for themselves.

@olivejuice5233

4 жыл бұрын

Craig Wall but it is fake small little brat

@walkertongdee

4 жыл бұрын

U never went to school eh, FAKE DUH.

@mojouk8935

4 жыл бұрын

You will get all the online weirdos who will get a hard on and counter this comment look above. Internet creeps we have now. lol

@alirezaeskandari2287

4 жыл бұрын

if you knew any thing about yagis you would not say so

@alirezaeskandari2287

4 жыл бұрын

they just turn on their phones hotspot

Another way to find the center of a circle is to draw at least two (but more helps accuracy) lines of exactly the same length and touch the outside twice. For example if you have a circle with a 4 inch diameter you can use 1 inch lines so long as all of them are one inch. Then go back over each line with a square and at the halfway mark draw a line all the way through. Each intersecting line will also meet in exactly the middle .

@callmetony1319

6 ай бұрын

I don't know if this method is accurate enough for these kinds of use cases, but an easy way to find the centre of a circle is to pick any point along its edge, zero a ruler on it, and scan the ruler left and right until the measured length at the intersection of the ruler and the edge of the circle is greatest.

This guy inhaled his grandpa's experimental internet gas.

@gabrielcoelho2346

4 жыл бұрын

Screentime!

With 75 ohm cable you will not get better results Because most wifi adapters are rated *50 ohm* (VSWR is important(

@saadachab8425

10 күн бұрын

yes maybe your are right, but @Ath_ hace 4 años To everyone that says that it won't work: In america you obey laws of physics In soviet Russia laws of physics obey you

I love how this car says "na berlin"

Super video! How (using which application) did you calculate the dimensions (diameters and distances) for making the antenna?

You need to add in links for the extra products you use. For example: the antenna cable to USB adapter.

@ssswasiim

4 жыл бұрын

Yes, I agree with you

I have build your Wifi-Antenna the way you told in the video. I am impressed! Instead of cupper i used aluminium but everything else remains the same. The quality of this antenna is unbelievable good!

@RahulSharma-ue6sg

Жыл бұрын

Hi @benjaminwesp7584 Could you please tell the the latency difference with an without using antenna, and As we increase distance don't we need transmitter and receiver both to be high gain antenna ?

At 9:01 that is GPS antenna, not wifi! Connect any metal thing to other end of the cable and results will be same.

@HelamanGile

4 жыл бұрын

So basically They boosted their GPS a thousand percent.

@Thomas1124ful

4 жыл бұрын

Any metal thing to the end of the cable? No, not really. While it might be still better than the internal antenna it will be nowhere near as good as the shown "wifi gun" antenna. And at the end they connected the cable to the correct pin.

@timsuttonlovinlife-

4 жыл бұрын

Man I love this channel it’s awesome 👏

@fantomgaming9018

4 жыл бұрын

No that wifi

@111chicane

4 жыл бұрын

Dumb!

hello I really like your videos. I have a question between iron, aluminum, copper and zinc which brings more signal?

It should have shielding between the contacts from the outside ground to the copper centre. If you was to do this on say a CB or Ham radio you would burn it up without shielding. I believe the low watt wifi could suffer from long-term use without making the rear shielded from the front over time.

@krunov9629

11 ай бұрын

it is not critical on this freq....

FIRST ONE IS 90MM NOT 80MM AS IT SAYS ON THE VIDEO! Had to cross check with the russian Kreosan video and it's 90, not 80. You can see it later in this video as well.2:38

@Abdullah-xz7ue

3 жыл бұрын

that's right the original : kzread.info/dash/bejne/d4hml9KnoNewj5M.html

Hello Kreosan team, super job & super video, one question: I have build a similar UKW Yagi antenna several years ago and normally the second element (the one which you connect to the core of the coax cable) should be islolated against the whole boom assembly. I did not see any isolation materials for element two in your arrangement. Did you use a short piece of hose plus two plastic washers or something similar ....? Best regards

@tarendra8211

2 жыл бұрын

same question bro

@krunov9629

11 ай бұрын

no need for isolating..in fact if You do that performance will be degraded..check your antenna knowledge

suoer excelente, felicitaciones a tu canal, desde venezuela.. es ingenioso las ideas q tienes y eso me gusta ya q aqui en venezuela es dificil conseguir poder de señal.

I want to see your video being reacted in Electroboom

@cjwrench07

4 жыл бұрын

You average kid The homemade wind turbine one, would be my vote for reaction video.

@IbraheemKhazbak

4 жыл бұрын

THE RECTIFIER

@furonwarrior

4 жыл бұрын

He mentions their video about the flying oil.

@yourelegantwaifu

4 жыл бұрын

@@cjwrench07 this video especially. They got a lot mistake during the process and some of it doesnt even make any freakin sense

@nvmyutube

4 жыл бұрын

its been done.....

I just can't stop laughing when he starts to go into town. Jus wow man

@franciscoestrada2552

2 жыл бұрын

Yes, me too

May I know how to calculate the antenna plate wide for this directional antenna?

The usb in the router where you plug in the wi fi adapter is the same usb for the storage (some modem routers have such functionality)

Please provide buy guide of the things used and simple map of it

"No one can defeat the russian engine ring!!!!" - strohiem but he's russian

I would love to see you guys make a tincana and see how well it works against this

all content of these channel are true unlike other yt channel. love it.

hi, great fun with your videos as usual. can you give us som links for : antenna adapateurs and routeur that accept USB device as source on internet kind regards from France :)

@verynice.mp4613

4 жыл бұрын

Stéphane BeBoX its being translated i think kreason doesn’t even know this channel exists lol

@ParadiseParadises

3 жыл бұрын

RF Coaxial SMA Male Plug to BNC Female M/F Radio Antenna Connector Adapter

Nice GPS antenna on the tablet ;-)

I have a USB WiFi adapter but it only has a built in (copper track on PCB) antenna. Could you do a video showing how to connect an external antenna to these types of wifi adapters.

what these lids made of i.e do they have to be copper or just any lid can work also where you can buy them any one?

One of the most powerful wifi adapters: no its just el-cheapo. Also nice job connecting the antenna to the GPS port of the tablet

3 жыл бұрын

Thomas Verschoof, it is directional.

Dude, I don't know what's cooler - the awesome sci-fi looking death ray wifi gun or the green automobile...I WANT THEM BOTH!!! Cheers, man. y'all are geniuses! If you came to Los Angeles you could probably trick the whole city into thinking you are INTERPLANETARY WIZARDS. Stay Groovy, Dudes. I Love the Videos!

would this work the same way with a yagi high gain antenna? with the usb wifi adatper?

Greetings from Venezuela, would I like to ask you if adding more rings to the antenna would give you more reach? or would it have to be only those that are suggested in the video?

KZread don't send me any notification. I have luck that i right now turn youtube.

@Drxxx

4 жыл бұрын

Press bell notification

@supersolex

4 жыл бұрын

wel thats because this antenna is fake

@alichank

4 жыл бұрын

@@supersolex what this antena have to yt sending notification system

@youbetterbelieveit8114

4 жыл бұрын

🤔🤔

@mahmoudzidan7407

4 жыл бұрын

Hi Man can we make a metal detector like WiFi Gun Thanks

You're probably losing most of your antenna's gain in that white coax cable. It's not made for 2.4 or 5 GHz frequencies. Also, is the driven element electrically connected to the reflecting element through the threaded rod?

@flyguille

3 жыл бұрын

Yes, the same I though DC short cut!

@fungo6631

2 жыл бұрын

Satellite LNBs reach up to 2.1 GHz, so for 2.4 GHz a not too long cable should work.

@krunov9629

11 ай бұрын

cable for satellite receiver is good enough to 10 m

Very interesing and wih a nice touch of humour. thank you Kreosan

I love your projects

There is a Problem with the Two Disks that is connected to the stud without insulation thus shorting the antenna circuit. The second disk from the two disks that is connected to the wire should be insulated from the rest of the disks and stud...

@krunov9629

11 ай бұрын

no....update your antenna theory....at that frequency a galvanic short circuit is not a radio frequency short circuit

I love this channel i idolize you sir i want to be like you someday i wish you will visiy philippines and have a vacation here

These lads are geniuses

Anyone tested the speed over like 300-400 ft (120 meter) distance? Would the speed be increased if both sides are using similar antenna?

Soviet Sheldon Cooper 😃 Awesome!

@johnhoye6584

3 жыл бұрын

Sheldon cooper was a theoretical physicist. Probably could not use a drill.

I love this wifi pushka 🤗

@lordelectron6591

4 жыл бұрын

Does it push wifi

@dangerousdoggo5465

4 жыл бұрын

means rifle

KREOSA Sou Do Brasil.. your videos are very good, the experiments or experience as I say, the antenna is very good. Would you manage to make an omni antenna 15Dbi or above 10Dbi ???

good video friend ... Question: is it necessary to place an electronic component between the positive and negative where the cable connects in the antenna discs?

7:38 MegaBITS of course ;-)

The shield and core shorted out, a mile of 75 ohm coax cable with no balun. Seems legit!

@Gamer-nc8qp

4 жыл бұрын

i was wondering that too its not insulated

@DavidLopez-bz4rj

4 жыл бұрын

Hajaj, yes it is fake.

@craigwall9536

4 жыл бұрын

It's not shorted. The translation came out "gaskets" when they meant "insulating washer". And no, it's not fake. It's not even new. This is very old technology.

@BeatboxNorwich

4 жыл бұрын

Oh, OK. Cheers for that, Craig :) A few of their vids have been called out as fake so I made an assumption.

@denz37

4 жыл бұрын

nah u got it man

Na Berlina! Towards Berlin - Sovjet WW2 retro with a homemade Yagi-Antenna and a green oldtimer .. But I like the curiosity though

everybody gangsta until it's start shinning.

Thank for this idea adopting the Yagi Uda antena. Hope you make signal/internet booster to those users who are only using mobile data internet/ users of Free and Paid VPN, no wifi, and the eqiupments are accessible at home because we cannot go to hardware store due pandemic and our age limit restriction.

Куда я попал Ахахпхах 🤣🤣🤣🤣 Оказывается есть канал инглиш креосан

@user-sr6pi5lp3q

3 жыл бұрын

И немецкий есть, только длхлый

More rf expiriments like thiss. Please

That car is Awesome! Classic. 💚💯

That car looks like a 1957 Fiat 600D I owned. Suicide doors too, nice.

@gordslater

4 жыл бұрын

Zastava 750 i think, so a licence-built 600

@becconvideo

3 жыл бұрын

Saporoshez SAS 965 . Made in Ukraine. The original Fiat Seicento stood model for its body but the engines are different- the Sappo has a V4 while the Fiat runs on inline 4 cylinders giving more space to rear passengers in the ukraine model. They were quite common in East Germany too but then less popular than the Trabant. (I don't know why, I haven't driven neither) Now collectors items due to their scarcity,

5:58 Waaaaaiit... Haven't you just shorted out the entire aerial to just two discs?? Aerials confuse the hell out of me!

@edgarbjorntvedt

3 жыл бұрын

This is what I think as well. I think this second disc must be isolated from all the other ones to make the antenna work as expected

@krunov9629

11 ай бұрын

no.... it is just like supposed to be....dc short is not short on 2.4 ghz

Have you tried using a UTP cable ?... would have less cable atenuation

In our country, we will even upgrade/modify it with even more cans or aluminium frying pan for more boosting

Thanks for visiting 🇮🇳 India 🇮🇳 I have seen ur video on hacker OM channel And thanks for the this video 🙏🕉🙏

@NewLife-jw9to

4 жыл бұрын

@Tushar Kashyap I said about hacker OM Aur Indian hacker bi hai we can get the knowledge But it's true that they just want views What do u asspect when ur an KZreadr 🙏🕉🙏🇮🇳

@NewLife-jw9to

4 жыл бұрын

@Tushar Kashyap haa king of random bi Accha channel hai Aur recently Indian hacker nay chloroform par ek video banaya tha Jo k bhout Accha tha Warna hum to chloroform ko Galat Tara say Samaj rah thay U know by watching the movies like de Dana dhan 🙏🕉🙏🇮🇳

No! You have to isolate the active part from the ground. This antenna is useless without.. making the antenna like this it will be a short between active element and ground...

@Fortnite-gb7dz

4 жыл бұрын

No this is like a magnetic loop

@Fortnite-gb7dz

4 жыл бұрын

Even a biquad antenna has a short

@sirhaugen1025

4 жыл бұрын

Nicolas Springer : No. A yagi antenna is nothing like a Biquad or Magnetic loop.

ur the most magical person and genius love it

Looks like you use 75 ohm cable. Isn't the feedpoint impedance of the antenna 50 ohms?

Isn’t that just a short circuit of the antenna cable? There should at least be an insulation between the last disk and the central screw?

@Jorissoris

4 жыл бұрын

No, that's not how antennas work. Just like in a Yagi-Uda antenna, it does not matter whether the directive elements are connected to the central boom as the electric field is (supposed to be) almost zero there

@blise518B

4 жыл бұрын

Ty for the explanation. Very interesting. I always thought there have to be 2 elements were a voltage difference can be induced or something like that.

@Jorissoris

4 жыл бұрын

@@blise518B You're not wrong! The point is that due to the speed of light and the very high frequency of Wi-Fi, there can be a voltage difference even though the elements are not insulated :)

@craigwall9536

4 жыл бұрын

No, the NEXT to last disk. And the insulation is there but the translator called it a "gasket". (The last disk is the "reflector" and the next to last is the "driven element".

@Jorissoris

4 жыл бұрын

@@craigwall9536 There is no insulation there. The narrator called it a gasket but it's clearly just a metal spacer

*Kreosan* improvements for you. I read somewhere, to isolate the 68mm disc from the central bolt by putting heat shrink tubing on the shaft. That way you are not creating a short. I dont know if that is correct, just trying to help. All the best guys, youre awesome

@EzeePosseTV

4 жыл бұрын

I was just thinking that when he slid the disc connected to the coax screening along the bolt connecting the coax center wire to the next disk without insulating the screen disk. Basically just rendered the rest of the antenna beyond the center wire disk useless. I remember making a CB radio tranceiver out of coke cans in much the same way as Kreo except my antenna was 22 foot high and took over an hour to tune the SWR in properly, lol

@d1s1ntegrator56

4 жыл бұрын

It may be AC isolated, but not DC. If a modem or other device outputs DC current to antenna - it is going to short out and you can damage device.

@krunov9629

11 ай бұрын

no no and no....there is no dc and galvanic short is not rf short ...design is good ...why is such many wrong comments on that ? check commercial antenna of same design

One thing I am hitting a snag on: My cable had a totally different end so i cut it off to get at the tip.... does the thin wire in the middle have to touch BOTH the first two plates or just the second?

What is the name of the connector that you use? From the satelite cable to wifi adapter?

7:49😂

I’m here for the creen car 🤣

Where can i purchase one of the Antenna?

Hey can you send me the name of the connectors which connects cable to t p link

Clever, but you need to fix your clock :-)

Amazing chanel

Hello, excellent work, what router model did you use?

Sure i can pick up open networks with my own router.

Seriously, with that long cable, you would loose all the gain you might get from the antenna. I smell fake. When you make these kind of USB-adapter-type antennas, you should use a long USB-cable and attach the adapter directly to the antenna itself, to get the shortest possible antenna cable.

@DavidLopez-bz4rj

4 жыл бұрын

Yes, it is a great fake. The antenna cant work at all. They lack of basic knowledge of antennas.

@craigwall9536

4 жыл бұрын

@@DavidLopez-bz4rj Apparently you're ignorant of disc-on-rod wave guides. This isn't fake. Put another way, this is a Yagi with circular polarization. It is _you_ who are ignorant of antenna knowledge.

@craigwall9536

4 жыл бұрын

Silly you. They've left the cable long because it would be stupid to cut it until you decide where you want to INSTALL it. AND because if it works at all, they know that it will ONLY GET BETTER when the shorten the coax. They're EXPERIMENTING. They aren't stupid and you haven't told them anything they didn't already know.

@DavidLopez-bz4rj

4 жыл бұрын

@@craigwall9536 You are the one who doesnt know that circular pol has a penalty of 3db versus linear pol, so silly is using it for wifi. I am a ham radio operator and I use a homemade antennas since 25 years. I can reach my home with my smartphone from 2km away, I have internet all around my valley. This antenna design is old as hell, you will never see a yagi design with evenly spaced elements. It is a piece of shit, I reach more with my microwave oven hahah

To Kreosan, I would like to invite you to Italy, Sicily to meet an Engineer friend of mine, I want to create some great devices to sell are you and your team available?

Подходит ли это для захвата лучей сокровищ под землей?

Пожалуйста, предоставьте руководство по покупке вещей и простую карту

Когда на основной канал выйдет ролик про чернобыль

@peppapigofficialspoiler1290

4 жыл бұрын

когда сделает у себя квартиру похожую на чернобыльскую

What?? The ground is shorted to the antenna ??? How could that work

@lordelectron6591

4 жыл бұрын

Maybe he insulated the discs?

@lordelectron6591

4 жыл бұрын

@@lands1459 Wait that means we get wireless free energy?

@lordelectron6591

4 жыл бұрын

@@lands1459 Can these rf signal be converted to dc? BTW thank you

Antennas like this one have been used for many years. It is called a disk Yagi or a surface wave antenna.

@tony5226

Жыл бұрын

🤓

Most of your projects are great, but this is fake as hell... Please avoid that, it did not makes a good name of your chanell.

@craigwall9536

4 жыл бұрын

It's not fake. This WWII technology, just at shorter wavelengths.

What are the steps to calculating dimensions and distances? I could only source caps 86mm in diameter. Thanks!

Can you give the links of mini parts. Like converter, adapter that you used

I want to make this antenna please provide full details and diagram with materials that I need to built it

Please explain how you determined the different diameters of the disks. Пожалуйста, объясните, как вы определили различные диаметры дисков.

Hello good afternoon. My wireless antenna got wet on the device's internal board. can't detect internet signals Any solution? please

Would of advice, TV coax uses 75 ohms. 50 ohm coax works better.

Where can I find that reduction I d like to buy one and I can't find it on the internet

Можете ли вы сделать что-то подобное, но не для Wi-Fi, а для охоты на сокровища?

What material are you using?

This booster can be use for mobile network or to send signal?

I love your Channel. All your ideas are awesome.

@ 2:40 didn't he say earlier it had to be 80mm not 90mm (or 9 cm)? Also what's the max speed you can get? The 2.4GHz wifi allows a max of 450Mbps if I recall correctly so that would be the max one could get with this antenna? I assume that it would not be able to work with a 5GHz signal, would that be correct? thanks :)

Finally a use for soup can lids

Why are the dimensions of the disks in this one different then those in your wifi gun video? Could I use the dimensions of the wifi gun video and just add more of the 37mm disks to increase range?

Hi, what is tenda router model, which cam be pluged with TP-LINK USB WiFi

To get a better signal, I advise you to use copper for everything, even the column