Buy some high quality Kevlar crackers here: www.ebay.com/usr/caliberwhips/

That’s actually 100 times cooler than a full sized. Bravo, I finally found a use for all the paracord I bought

Insane video!!!! Made my best whip so far by using this. Thank you very much

"What kind of sentence was that, I ended it with a preposition." XD

I bought this whip from you. I was looking up videos on how to make one and after watching this video I checked out your links and what do you know, the whip I watched you make was for sale, I think it was your last whip for sale. It is holding strong and still gets some love. Sorry for the late comment but I was just looking at this whip and I didn't know if this video was still up. I wish you the best and thank you for not only making this whip, but selling it. This is the only thing I have purchased I can watch being made

Great video really helped me with designing my own. Thank you so much

Excellent video. I appreciate your sharing the art of whipmaking.

@eatyourduck3352

5 жыл бұрын

You can buy whips on his website to support his art .

@caliberwhips9595

5 жыл бұрын

dichromanjd - Your welcome.

Good thing its Christmas break because I know what I'm going to be doing

be back soon, nice job

That’s a cool whip.

Ha, when you said “nuke it” , I thought of putting it in the microwave.

Amazing techniques

Nice Whip

Good job bro 👍👍

If you use a fork tines are slightly smaller than the BB's way easier to slide the BB's without hurting the end of your finger

Very nice looking

Excellent video you have gained a new subscriber 👍

We use that fibre glass tape on our cricket bats in Aus so we don’t have to spend 20+ hours knocking them in with a special knocking in mallet

Can you please give me a lists of all the Materials not the tools but the materials thank you awesome video by the way 👏🤍

Wow,tai chi master ma baogua’s lightning whip

Another question: what are your thoughts on using trampoline bed material as a bolster? I’ve considered the idea, using it in function similar to a leather bolster. It’s polypropylene, strong and springy, and a screen mesh to allow wax to pass through. See you next July, too. Great video as always

@caliberwhips9595

5 жыл бұрын

Chiiin Thanos - I've never tried it, but don't let that stop you. That sounds like a good idea, but the only thing I would say is that the material may be too thick. But I don't know.

Do you have any of these whips for sale currently?

Hey man what are all the measure ments for the over lay we are currently making two of theses but we can't finish them because we are not sure about the measurements

@richymckeague9708

3 жыл бұрын

He said for his English eye, he started it with 2 15ft strands and the most likely plait all the way to the handle as if you were plaiting from the handle. So I would just cut all my strands the same measurements

Hey is it okay to use senew to bind

Can i use ball chain instead of bb s?

When putting the cord on the end of the steel rod, how long is that strand of paracord??

Has anyone ever tried to use pellets instead of beebees? The pellets have a coned bottom and a rounded top, in my mind it would work like a ball joint haha but I've never built a whip and just got my first one from amazon a few weeks ago, the red mark behind my ear is healing, thanks for asking.

he. i only ever made an adam winrich instant bullwhip. would you recommend this whip for a novice whipmaker?

wait, are the 2 10 footers glued one on top of the other?? with the 6.5 footer in front of that??

@caliberwhips9595

5 жыл бұрын

Robert Nelson - No, one is threaded through the other.

What about using pellets..since they are a little heavier then bbs? Would that be a good or bad idea?

@caliberwhips9595

3 жыл бұрын

Yeah, it should be fine

How big are the BBs you are using for this whip??

Are the Paracord guts taken out and where is the 6.5 ?

Ok I see others asking. but the answer you give is not what I am looking for. You have 2 x 10 ft pieces and 1 x 6.5 piece. when you are starting to plait it looks as if there are just the 2 10 footers glued to the bar. In the center so I assume there are two 5 foot lengths hanging on each side. now my question is how did you incorporate the 6.5 foot length? and I understand that it is staggered 6" But where does it start???

How long do you drop the first strand

Tôi rất thích roi và tôi ước mơ có được

Verry nice compared to other videos i have watched,way cheaper for n old ish pensioner, Well done! suubbed n hi from outback south australia...tempted to grab a hit n run kangaroo n skin it but i doubt i could lift a red especially..prices are stupid for a hide and more crazy for a cow,but people want the world for a few hours now a days..not saying its easy depending on how the hide is treated some are definatly worth the cash.Peace mate

Is there a particular reason this is a two belly whip (core + overlay) instead of 3 belly? or am I watching and misunderstanding?

@caliberwhips9595

5 жыл бұрын

Two belly whips are just faster to make.

6mm bb? What is the diameter for the rope? 6mm as well?

How long is the total whip here? How long was the core strand?

@caliberwhips9595

5 жыл бұрын

3.5' for both the core strand and the thong

Could I use duct tape instead of the other types

Hi caliber whips I’m wondering what are the size of all of the cord you used?

@caliberwhips9595

2 жыл бұрын

550 and 275 paracord

Its been a while since i made a whip. any suggestions for removing dust from the wax in my turkey roaster?

@caliberwhips9595

5 жыл бұрын

I believe I have a short video on that on my sandbox channel.

@GNGR-dw4ch

5 жыл бұрын

@@caliberwhips9595 ill check it out. I love your videos keep it up brother!

He just like became Bob ross while platting the fall

What is the price on one off them lighting whips

Do all Paracord whip makers on YT have that Bob Ross Quality? XD

How much paracord do you use of each color. Because I was wondering if a 100 ft hank would be enoguh

@caliberwhips9595

5 жыл бұрын

Blackhawk 19 - A 100ft hank should be enough for one whip.

@jaycedavis4674

5 жыл бұрын

@@caliberwhips9595 thank you!

I want to buy one of these from you,but can't get to where I buy one

When you were wrapping the handle where was the 6.5 foot cord because I only saw the two ten foot ones

@caliberwhips9595

5 жыл бұрын

Blackhawk 19 - You can see me singeing it off.

@Russellsagecline

3 жыл бұрын

They are asking what I am, as well. When beginning the very first plaiting, it looks as though there's just 2 strands. Is the 6.5 BELOW one ten footer?

@icepros1083

3 жыл бұрын

I think the 10’s are staked and the 6.5’ is in front thats what im trying i will let everyone know once I finish mine

Perpendicular & Parallel

Love the video. Thanks for putting it together. Where to you get your spring steel rod? I have had a heck of a time locating that material.

@Rookthabastad

5 жыл бұрын

prracz you can just use steel rod from a hardware store

@Rookthabastad

5 жыл бұрын

prracz I use rods that have about 1 inch of threaded section that my brother makes for me so I can just lace the cord over the rod

What are the prices on one of them lihthing whips

I don't get the plat part at all it's not explained which one you grabbing to start with or anything that helps getting it started. I'm a noob granted but dang been trying for over an hr in now n there no videos out there that do it like this. Idk thanks for any feed back

why do you use thread instead of artificial sinew, can i just use sinew

@caliberwhips9595

5 жыл бұрын

Blackhawk 19 - Artificial Sinew is stiffer than thread and we need to make that thread almost nonexistent.

Has anyone ever built a whip with electric chord cable core?

What kind of thread did you use

@caliberwhips9595

5 жыл бұрын

Blackhawk 19 - Just bonded nylon thread. I believe it's number is in the 90s.

As a complete novice could someone please tell me if all the paracord is gutted

@uhnutherdude

3 жыл бұрын

Yep, they always gut the paracord.

can I make whip out of paracord that still cracks loud but does not have BB's?

@stanleykokcheeboon8398

Жыл бұрын

What’s function of bb?

@stanleykokcheeboon8398

Жыл бұрын

I made a paracord nylon bullwhip without bb that cracks. Unfortunately it not as smooth as video when I swing my whip.

@zip4110

Жыл бұрын

@@stanleykokcheeboon8398 the function of the bbs is to make it crack smoother and give the whip more weight

Is there a particular reason for your use of copper bbs? I use zinc galvanized steel bbs, mostly due to a bad habit of spilling them. I wear a magnetic ring, and it’s been surprisingly useful

@caliberwhips9595

5 жыл бұрын

Chiiin Thanos - I always thought that the copper ones were (minutely) heavier, since copper is denser than zinc. But it really doesn't matter.

@nacekilpatrick7496

5 жыл бұрын

@caliber whips where do I get bbs. In Australia Ipswich

@caliberwhips9595

5 жыл бұрын

Nace Kilpatrick - Try eBay or anywhere else online.

I wish you would come out of retirement dude because I would love to buy one of these

@baracktherealobama9809

4 жыл бұрын

Look at his latest video. It's depressing

@bbsan49

Жыл бұрын

Hi, Alex. I make these whips for sale. Barbwire Whips.

@MasterSword505

Жыл бұрын

@@bbsan49 is that right ? Do you have any vids ?

Kesh on dilvri

عوز واحد

вы продаёте это ?

why does it look like you're not even pulling the strands tight at all? Most people pulled a strand tight before pulling it into place

Please one bullwhip

Can I make it without bb s

@stanleykokcheeboon8398

Жыл бұрын

I did made a nylon paracord whip without bb. But it seem like not smooth as video when I swing it out.

Hey can I ask a question?

@caliberwhips9595

5 жыл бұрын

Vince Owen - Sure

@shane8037

4 жыл бұрын

@Owen Dejong that was his answer

Whats the diameter of the BBs?

@richardhatt6541

5 жыл бұрын

.177

@iliketomakeweapons6677

4 жыл бұрын

4.5mm if use metric

How long is the core

@caliberwhips9595

5 жыл бұрын

Stephen Medianero - The core strand should be 3.5' with the 3 inches of bbs.

@stephenmedianero6418

5 жыл бұрын

How long is the overlay strands

@caliberwhips9595

5 жыл бұрын

Stephen Medianero - The two longest strands are 15 feet, but since this is an English I and you have to add strands instead of dropping them, you'll have to figure where the best place to add them.

It’s funny how people ask questions that are literals in the video 😂 but, when you have the 7th strand inside the core and running a 6plait, when you bump up to 8and pull that core strand out and add the 8th... that part is pretty vague. And also, you didn’t show the measurement where you added the core to the English eye

@caliberwhips9595

5 жыл бұрын

Yeah, covering every little detail is harder than it looks. You add the English eye a few inches above (or right on top) of the core strand.

Olle uno de tus videos puedes aserlo en español porfa😊😊😊😊😊😊😊😊😊😊😢😢😢

would this be a good first whip to build or no

0:00 0:29 the quiet kid over zoom

Hola yo me quiero ganar. Un látigo misueńo. Es ter. Uno. Mayari. Kevin

চাবুক চাহিয়ে বানানো

love your applications on whip making , the only thing I don't understand why when you are explaining them you have to whisper, but when your just talking you speak normal, some of us older folks are a little hard of hearing.........................Just Saying

Hi

Please give me one

In the 2018 there are still guys who use tape for their whips? Why?

Hyy mereko shahiy

Please give me one bullwip

@jimboyrabago7949

2 жыл бұрын

Bullwhip

I can't go. it sucks. I f**k**G hate it

Your way of explain is too bad bro

Listening to your voice with that dreadful, annoying, and horribly intrusive 'music' noise endlessly repeating in the background made this video unwatchable for me. Had to give you a dislike for what would probably have been a good video otherwise. Why on earth would you include such an irritating, distracting, and jangling noise to detract from a viewer's ability to hear you properly and concentrate on what you are saying?