못하는게 뭡니까. 터프하게 내 던지는. 그리고 그냥 봐. 할말없게 만드는 diy는 계속될것이다. 쭉~~~~~~욱

You created a channel of what I wanted to do many many years ago! I am glad someone did it! Kudos and keep up the good work. BTW, I did a table similar to yours a few years back too. Wish I had filmed it.

볼때마다느낀거지만진짜금손이다~~^^미쳤디미쳤어~~~👍👍👍👍👍

Just discovered your channel today, an already watched every video ! Awesome work my friend you are really skilled an creative. More forged carbon would be awesome ! Where are you from ?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Thank you for your compliments. I am preparing another Forged Carbon video. Please look forward to it. And I live in South Korea. Thank you for watching.

@sherlonio

4 жыл бұрын

Same

Keep doing what you’re doing and your ending up with a crazy amount of fans!!

하나뿐인 키링...멋져요 :ㅁ

어마어마 하네요 ㅎㅎㅎ 잘봤습니다 !

영상기다리고있었어요👏👏👏 멋쪄용

@ECOLAPStudio

4 жыл бұрын

항상 감사합니다! 생각보다 간단하지 않은 작업이라서 고생을 많이 했습니다. ㅠ 금은방이선생님 오늘 영상도 잘 봤습니다~ 감사합니다~ ^^

Can you make carbon color please ? 😀

와~~~~~!!! 지렸습니다!!!!!

Watched all your videos already. Love the content! Subbed!

다이 배우러 왔다가 포기하게 만드는 매력^^ 저는 도저히....!

For me, working with carbon fiber as a job, being home for corona..this is so familiar to watch ♥️

i love your videos and have liked every video. At some point I want to make something out of carbon. keep it up

I just finished carbon fiber skinning my side fairings of my CB900f. Thanks for all the help!

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I am very curious about your results. Are the results satisfactory? Please email or comment if you have any questions! Thank you.

@rogerbrooking4956

4 жыл бұрын

@@ECOLAPStudio For the first time playing with carbon fiber it was ok. I used plain carbon, it seems that the twill gives a better look. There are a lot of little steps to make the job nice. Definitely a heat gun or a torch makes the job easy to remove the bubbles I can send you the pics! Send me your e-mail!

@ECOLAPStudio

4 жыл бұрын

@Roger Brooking ecolapstudio@gmail.com Thank you!

대단하다ㅋㅋㅋ손재주 좋은건 예전부터 알고있었지만 대단허이 ㅋㅋ

@ECOLAPStudio

4 жыл бұрын

노가다의 결과물이지ㅋㅋ 사포질을 하도 많이해서 팔근육만 생기는 거 같아;;;;;

Superbe tes vidéos ! J'ai découvert ça hier... Ça me donne envie d'en faire 😂😂

LOVE ALL YOUR VIDEOS, I LOVE YOUR BMW ALSO AS ITS MY DREAM WHICH IS KIND OF IMPOSSIBLE FOR ME :(. YOUR CARBON FIBER STUFF IS SO AWESOME YOU HAVE GOOD KNOWLEDGE. GOD OF CARBON FIBER ECO-LAP STUDIO

Love your videos! Already want to make a forge carbon fiber table!! Any future garage art carbon ideas in the future??

Watched all your vids! Love the creativity!! Your channel will grow huge one day. Keep up the great work man

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I appreciate you. Thank you so much. I'm will make a fun and informative video. Stay tuned to my channel. Thank you for watching.

Your are a genius men and very creative, like

진짜 존경 합니다 ㅠㅠ

Amazing content. I its the 2nd video i see from you and i love your content. Already subscribed. Keep up the great work. I would love to buy things that you do, like this key chain, only that i am more of a Mercedes fan, hahaha😂

Wao..!! I like me your vacuum method.. Good video, I subscribed.. 👍✨

you are the boss ;) !!!

Love your videos! It would be awesome if you made a forged carbon bmw key cover!

Nice job bro

Un crack ! Muy fan de tus vídeos 🔝 Gracias por el contenido

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Thank you so much. I'm going to make a funny and informative video. Please look forward to the next video. I'm going to make something really cool Thanks for watching.

Good job!! Congratulations!!what kind of vinyl do you use?

Great Video, what do you think about clear coat on top? Thinking about "UV yellowing" of the resin? Thanks!

very good dude

ever done any larger parts that require a split mold? you seem to have nailed every other process

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I tried to make a mold with a 3D printer, but it failed. Since I am working at home, it is difficult to make parts that are too big. Especially if it is a size that needs a split mold, it will not be possible at home. If I have a workspace, I want to try big project. Thanks for watching.

finally thanks man

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! You're welcome. Thank you so much for a good idea. Stay tuned for the next video. I am planning a nice and fun video. Thank you for watching.

awesome video dude!

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Thank you. I will make fun and informative videos. Please, Look forward to next video. Thank you for watching.

Amazing

Love your Videos! Please do more car body parts videos :)

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Thank you. I am planning many carbon fiber parts for my car. I came up with very good ideas, and soon I'm going to produce parts and videos. Please look forward to the videos. Thank you for watching.

This forged carbon looks fucking good!!!

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I will make a funny and informative video. Stay tuned for the next video. Thank you for watching.

작업량이 어마어마하네요... 잘 보고 갑니다. ^^

@ECOLAPStudio

4 жыл бұрын

네ㅠ 저도 별로 어렵지 않을거라고 생각하고 시작했는데.. 예상치 못한 변수가 많았던 작업이었습니다. 경험을 했으니 다음엔 더 잘할 수 있으리라 생각합니다. 감사합니다 ^^

@JaehongsPark

4 жыл бұрын

@@ECOLAPStudio 다음을 기대하겠습니다. ^^

4:58 흰색 천은 무엇인가요 저렇게하는이유가궁금합니다 ㅎㅎ

당신 카본장인임? 영상보고 놀랫네요 구독

@ECOLAPStudio

4 жыл бұрын

안녕하세요! 장인은 아니고요^^ 아직 카본섬유에 대해서 혼자 공부하고 이것저것 만들어 보고 있습니다. 그리고 그 정보를 많은 사람들과 공유하고자 합니다. 앞으로 재미있고, 유익한 영상을 만들테니 기대해주세요~

6:15 meanwhile i`m with my OREO biscuits looking exactly the same :)

Next step is DYI carboning the whole car ? xD very nice work btw ^^

This man is a genius

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Thank you for your compliments. I will make fun and informative videos. Please look forward to next video. Thank you for watching.

can ı use epoxy without hardener

Sensacional channel,congratulations, i really like your channel

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Thank you so much. I will make more interesting and informative videos, so stay tuned to my channel. And Look forward to next video. Thank you for watching.

What material are you putting over the parts before you put cover and clamp shut?I don’t see you use any method for popping air bubbles. Does this clamp do that?

천은 무엇인가요 그냥 헝겁인가요??

Your channel is amazing!!!!!! Keep up this good work! I’m surprised why your channel isn’t going viral!! I’d love to buy that keychain for my M :D it looks beyond aweome! Please let me know if you would sell anything! Thank you!

You could please teach how to manufacture responsibility piece or body parts for real performance value by weight relieving. Great Job!

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I appreciate you. I'm will make a fun and informative video. Stay tuned to my channel. Thank you for watching.

soft yellow wax ＝蜜蝋wax？教えて下さい

Can u try to make carbon fibre car key cover?

Good work bros, try your best

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I will make a funny and informative video. Stay tuned for the next video. Thank you for watching.

카본계의 사나고 에코랩 화이팅이요!ㅋㅋㅋ

@ECOLAPStudio

4 жыл бұрын

항상 응원 감사합니다~ 열심히 하면 하는 만큼 결과가 오리라고 생각합니다. 더 멋지고 재미있는 영상 만들겠습니다. 감사합니다~ ^^

Do you think you could sell these? Was it a lot of work to finish the end product?

MORE FORGED

That’s great!! An idea... Carbon Fibre mirror caps

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I already have a carbon fiber mirror cap. So, I don't plan on a mirror cap yet. But if I have a chance, I'll do it. Thank you for watching.

@ScottPC

4 жыл бұрын

ECO-LAP Studio thank you!

Looks amazing! Your videos are very therapeutic and relaxing! Do you ever sell product / services? Keep up the great work!!

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I am not selling carbon fiber. I would like to share fun and information in video with many people. Stay tuned for the next video. Thank you for watching.

@OrangeManStan

4 жыл бұрын

I love your videos, this is the sort of things I make for my motorbike. You are very advanced to what I do. I'd love to hear you commentate over the video's in English, it would make your videos at a very high level of education a a great learning platform. There are quite a few things I don't understand and would love to know more about the availability and cost of products. Great video's and looking forward to seeing more.

@ECOLAPStudio

4 жыл бұрын

@@OrangeManStan Hello, Buddy! Thanks for the comment. I will try harder. I want to acquire more knowledge and share it with many people. I will make a fun and informative video. Thank you for watching.

amazing job ! Can you make a video on how to make a carbon hood??

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Making a carbon fiber hood is very complex and difficult. I haven't tried it. I think it will be similar to the method in this video, but I can't give any exact help. I am so sorry.

Where do you buy clear top coat??

I just recently came across your channel and I immediately subscribe cause I love it! By any chance do you sell any of the parts you make online?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Thank you for subscribing. I do not sell carbon fiber. I have a different job and I work on carbon fiber after work. I am still studying carbon fiber myself, and I would like to share my knowledge with many people. Thank you for watching.

Those are some huge ass moulds for such small parts...

สอนใช่โปรแกรม เครื่องปริ้น3Dหน่อยครับ

Amazing job man, i guess you can link product you use in the description via a link amazon for example Thank for what you make

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Many people are asking questions about the ingredients. So I've been thinking about Amazon. However, I couldn't get the exact information, and I think it needs a lot of information. I'm going to come up with a way to introduce ingredients to viewers. Thank you.

@clement60540

4 жыл бұрын

ECO-LAP Studio thanks so much dude 🙏🏻👌🏻

나 하나 찜!!! ㅋㅋㅋㅋ

@ECOLAPStudio

4 жыл бұрын

ㅋㅋㅋㅋㅋ

Hey that's me! Cheapo guy 🤣

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! You gave me inspiration and idea. Thank you so much. Stay tuned for the next video.

How much to carbon fiber my trunk 😩😩😩

Can you please tell us what silicone mould we need to buy from Easycomposites for the UK buyers, and how to mix it ??

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I think,the silicone is not sale on easycomposites. If it is silicone for mold, other brands can be used. (Recommended hard type) The mix ratio of silicone varies from silicone to silicone. The one I used was 1: 1 and the mixing ratio is indicated on the purchased silicone. I hope you helpful.

Impressive! This can be a product in the market! Did you think about that? 👨🏻‍💻👨🏻‍💻👨🏻‍💻👨🏻‍💻👨🏻‍💻

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I have a different job. And I don't think my work is perfect yet. I want to share the knowledge I know with people through video. I'll prepare when I become better. Thank you for watching.

Where did you get the stickers from? And is there a specific type of sticker I'd have to use if I want to make my own keychain?

@ECOLAPStudio

4 жыл бұрын

Hi friend! I bought it in a Korean online shop. But the sticker I bought is not good. This sticker has a slightly damaged print on the epoxy resin. I recommend vinyl sheets with each color cut separately than printed stickers. I hope you helpful.

J'en voudrais bien un mais avec le logo Lexus si possible ? 😂😂

Very impressive . 👍🏻Maybe add some background musics in the video.hahaha

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Thanks for the advice. I'm not planning background music. I wanted to convey the real sound I was working on. I don't want the background music to interfere with the sound of work. Please understand it. Thank you for watching.

Can you pleaseee make me a Subaru one?

Come ci possiamo mettere in contatto per un volante golf 5 ??

Hey cool videos man! can you give a link where to buy the epoxy?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/

Hi I tried this out and everything came out perfectly except for the peel ply, for some reason I couldn’t get it to come off. In the process of trying to peel it off, the glass pane broke. Any tips on how to remove it properly in the future?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Are you OK? Did you not hurt? Have you tried to remove the glass first? In the video, I did not remove the glass first. The silicone mold was removed and then the peel ply was removed. The peel fly is very strongly attached to the glass. So, if you try to remove the glass first, the glass may break. One tip is helpful when using release wax on glass.

Is it possible to cover other big things like a diffuser with forged carbon?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I haven't tried the big parts. It is not easy to make big parts because I am working at home. But if I have a workspace, I will try. Thank you for watching.

Wie machst du diese Aufkleber? Drückst du die selbst? Wenn ja was für einen Drucker nimmst du und welche Folie? Danke im Voraus 🙂

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I bought a sticker in an online shop. However, this is of poor quality. If I had used a vinyl sheet sticker, I think it would have been better.

에폭시와 경화제를 2:1로 맞췄을때 얼마나 기다려야 하나요?

@ECOLAPStudio

4 жыл бұрын

안녕하세요. 경화시간과 비율은 에폭시마다 모두 다릅니다. 에폭시 구매시 제공되는 자료를 확인하셔야 합니다.

ECO-LAP STUDIO est-ce que les logos en carbone que vous fabriqué est-ce que vous les vendez ? Et si vous les vendez vous les vendez pour combien ? Parce que j'aimerais bien en avoir un si possible

Hy! Amazing videos and work😁. It would be possible to know where to buy the stuff that u use? Thx👍🏽

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/

@signo89

4 жыл бұрын

ECO-LAP Studio yeah! I buy all from easycomposites💪🏾. But im interested on other new webs too😊. Thanks!!

can you make a list for what we need to make carbon fiber parts? i am quarantined so ill be doing this stuff

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/

@IdkWhtYouDid

3 жыл бұрын

@@ECOLAPStudio Hey, I want to try this at home, is there a specific carbon fiber sheet to buy?

I have another question if you don't mind. I've ordered release spray however it won't be arriving for about another month. Can I use WD-40's Silicone Lubricant?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I have never used it with WD-40. I'm not sure, but WD-40 also seems to be possible because it has oil. However, you should make sure that your parts are not damaged by WD-40. Thank you for watching.

엌ㅋㅋ 초장부터 뿜

@ECOLAPStudio

4 жыл бұрын

별로 어려울게 없을거라고 생각하고 시작했는데 이것저것 생각치 못한 문제들이 많이 생겨서 고생했던 작업이었습니다. 더 멋지고 좋은 퀄리로 만들었어야 했는데 조금은 아쉬운 영상이기도 하네요ㅠ

Is it possible to make the silicone mold without a 3d printer? I want to try this at home

@IdkWhtYouDid

3 жыл бұрын

How would I make the black sphere at home without the printer?

me gustaria echarte una mano con el suministro de resina y fibra de carbono, es posible? I would like to help you with resin and carbon fiber supply, is it possible?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Thank you so much for your suggestion. Email me if you can. ecolapstudio@gmail.com

이런걸로 굿즈 판매 하실 생각은 없으신가요 ?

Greetings! I have carbon fiber diffuser for my car, but it starting to turn white and cloudy. Do you have a way to help me to fix it? Thanks.

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Your diffuser thinks the topcoat is being damaged inside. It is probably necessary to remove all topcoats by sanding and apply new topcoats. Alternatively, you can also use a clear spray (anti UV recommended) If you send the picture to me? ecolapstudio@gmail.com

@gon55-1

4 жыл бұрын

ECO-LAP Studio thank you for replying! Yes I will send a picture to your email as soon as possible so you can help me,thank you my friend.

They came out beautiful. Well worth the wait. Forged carbo looks way better then standard carbon. 👌

@ultralinx200

4 жыл бұрын

And it pain in the ass to cut it manually

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I wanted to make a better result and a video, but I feel a little disappointed my self. The next video is planning something really cool. Please look forward !! Thanks for watching.

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Yes, It was a little hard work. It is a cut carbon fiber called chopped carbon. However, I wanted to recycle unused carbon fiber. I hope it helps you a little ^^ Thanks for watching. Stay tuned for the next video!

@rstezza

4 жыл бұрын

ECO-LAP Studio video was very good. First cut carbon fibre video I’ve seen. Don’t beat yourself up. It was good.

@ECOLAPStudio

4 жыл бұрын

Thank you bro! Stay tuned for the next video. I'm planning something cool. Thanks you.

ou acheter???

Hi where do you buy your carbon fiber from ?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/

Next forged carbon fiber flat bottom steering wheel?? I know you did one already but not one has flat bottom or show how to do flat bottom

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! The next video is a Forged Carbon Fiber table. It will probably be uploaded before the weekend. Please look forward to it.

@vivekwastaken255

4 жыл бұрын

ECO-LAP Studio absolutely you are changing future! And could you make flat bottom steering wheel by any chance?

hi how can i buy?

Dry carbon next?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I can't make dry carbon. To make dry carbon, you need an autoclave. It is very expensive and very big.

Sir! I'm beginning to do carbon projects. Can you show me where can I buy carbon fibre online?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/

Where do you get your yellow wax from???

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I bought yellow wax in an online shop in Korea. However, we do not ship Korean online shops overseas. I introduce you to an online shop in the UK. You will be able to find what you want. www.easycomposites.co.uk/#!/patterns-moulds-and-tooling/Mould-Making-Materials/soft-yellow-filleting-and-filling-wax.html

What do you spray before using the sand paper?

@voongnz

2 жыл бұрын

Water

which product do you use?

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! I used laminating epoxy resin, topcoat epoxy resin and carbon fiber cloth. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/

This production of both product and video is so stellar in all of your videos. It irks me that you don't wear the proper-sized gloves.

Bel lavoro!possiedo una bmw f20 m sport voglio provare a fare qualcosa seguendo i tuoi video!hai un canale instagram?

I need one

@ECOLAPStudio

4 жыл бұрын

Hello, Buddy! Hahaha I still lack skills, but thank you for your compliments. Please look forward to the next video! Thank you for watching.