Taryl has got to be the best thing I’ve found on the innerscreen so far!!! Lol!

@thomasjehnkins1986

2 жыл бұрын

I know I love the background sound effects like for jaws when something could be sinister lol,

ATTENTION GRASS RATS!!! KROHLER has updated their web site FINALLY! Its more user friendly & easier to navigate but you still have to enter as a guest if you don't have an account set up. Theres Yur Dinner!

@MrJustDIY

7 жыл бұрын

Hi Taryl, I've started a small engine repair shop and was wondering If you could point me in the right direction on getting some cross reference books and parts books. Any info would be great. I've picked up some great tips on your videos.

@neilseurattan5437

7 жыл бұрын

MrJustDIY

@bobpiff9081

6 жыл бұрын

MrJustDIY if you have an Oregon or Stens account, their catalog should have a cross reference section. usually in the back.

@whoknows3347

6 жыл бұрын

where is the number on a briggs oppesed 18hp

Y'all are awesome for making lawnmower part searches entertaining! I'm repairing for the first time so clarifying the different model numbers for the vehicle versus the engine was very helpful. Thanks guys!

your videos are a great service to all us diy'ers ! Keep 'r up Taryl ( and good job camera person ! )

HOOF HEARTED here, Thanks to you Taryl if can have my dinner. I just ordered my starter I've been looking for. Can't get any better than that. HOOF OUT!!!

Thanks Taryl, much needed info. Work to do, parts to order. Great video.

Thank you so much for your videos. As always very helpful and entertaining. I wish I lived in your neck of the woods.

Ya know Taryl, you make us laugh, but you have a great information channel! I'm sure its been a lot of help to us DIYfers. Thanks for sharing!

another great video mr taryl and taryl jr. i learn alot from you guys and i love small engine repair.

Too funny! You make working on small engines way too fun!! Thanks!!

You did good over the years organizing your successful business. The cat video was the best.

YOU KNOW THIS REALLY HAS TO BE YOUR BEST ONE ! I HAVE A HELL OF A TIME LOOKING PARTS UP ON THE INTERNET ! THERE ARE MANY BRIGGS PARTS IT'S SCARY

@czarekaj1098

4 жыл бұрын

I'm in the same boat. Most of them are a rip off

Just placed my first order with Propartsdirect four hours ago, and put referred by Taryl Dactyl in comments section. Hope they take care of you Taryl. Thanks for all you do!!

@Navv6343

5 жыл бұрын

Stfu

;D thanks Taryl for all your help!

Great work taryl. I've learned so much from your videos. I haven't paid you. I owe you my deepest graduate.

Very good information brother. thanks for another great video. Cheers The Dizz

Thank You’ll for more laughs and information about parts

Taryl how do you find a good dentist on the interscreen?

He was planning to have some soup? Haha. Things are so different today with buying parts. Back in the day, my brother worked at the Sears repair center in Schaumburg, Illinois and if you wanted parts, you went there or a few local shops.

Thanks for this knowledge

taryl... what is your favorite brand of engine to work on? i like b&s, but i've never touched the other brands.... am i missing out or is briggs the easier brand to work on?

1000th like here!!!!!! Great videos guys.

That propartsdirect does carry my carb for my weedeater. It's a walbro WT520

HAD TO WATCH IT A SECOND TIME ! GREAT VIDEO

Cool! Thank you Taryl❤

Damn ! Slippers will have to live on tv dinners.

hay taryal love watching think your funny humor some times makes the repair process easier I have a question about carberators can a Briggs and Stratton carb be used on a techumse engine long story I got a snow blower with a lot of parts missing and don't want to invest not knowing more hystery about the blower it's self looks fairly new as it was said looks are deseiveing so that's most of it thank you in advance

ROFLOL! Love the catfished part. So many awesome men have been totally hosed over that way.

Good info Taryl.👍

Thanks

Internet Explorer! Wow! We’ve come a long way since AOL. THE FUTURE IS HERE!

1😂😂👍,Roy said hello,from Pro parts N.H.☺Greetings, From Tampa Florida 😎

Taryl thanks for this. As always things are just a bit more complicated. As I have no doubt you know. For example a Echo SMR-2410 weed whacker comes up SMR type 1 or SMR type 1E. All the tag says is SRM-2410. If I enter the engine family that is on the tag THE024UB24R in the model space it says not found. I tried swapping an o for zero and vice versa with the same results. Yes They have a phone number. However Amazon has among the choices a complete carb and refresh kit for $16 that says it is for the SRM--2410. For this price one has to wonder about reliability but not the country of origin.

I had to figure this out looking for why the JD/Scott's rider wouldn't move. I got catfished by the Tuff Torq K46. Then the engine started to scream. I could be in one of Taryls videos at this rate.

Thanks for the video was helpful

@TarylFixesAll

8 жыл бұрын

+Wayne Vogeler Theres Yur Dinner!

I looked up propartsdirect they got a lot of cool stuff in there

Thank you.

Hi guys Ime from the UK England and I watch all your vids ,very weird in a good way but great information,these parts list sites you recommend are they established here in the UK England or only across the waters

this makes me excited to work on a 2006 6.75 hp 21 inch I found on the curve. Can't wait to hear that briggs motor fire up and cut grass this spring and summer.

Numbers are a must. I even did a video on it.

Gotta love a good Braggs & Strychnine.

you rock

hey Taryl have you ever worked on a harbor freight 2.5hp Greyhound engine i have one that want kill by the switch or the wire any thoughts?

tarly i never heard of billy goat brand what tey make mowers ? love the video's

I get it!!!!!!!

Tarl, great show! What about weed eater parts? I have Dear Jon S1400 I come up with all kinds of what that heck it is. Is it Homelite, or not sure?

I just switched out all my engines to be Kohlers .... so this video is most useful

TARYL SENT ME!!

Hello Taryl, since I don't see any listing on ProParts for McCulloch, who's parts house do you use? Waiting for my dinner!

Hey taryl can u do a vid on crapsman toe out issue

good

Taryl, you need to volunteer to be slippers “Best man”!!!!

@brandonsizemore3619

5 жыл бұрын

Nope, weed eaters Lol

Sometimes i watch these videos just for the comedy,i know how to look up lawn mower parts, im actually pretty good at it,lol

This guys are funny kool

Need HELP! 1100 hrs old crapsman gds6500 & findin parts for the kroller pro SV735S.. I was snowblowin last year when bam! I lost power and I think I threw a rod!..(slappin noise when runnin) when I dissembled it theres a very slight dunk side to side where con rod meets crank... Dont think I need oversize because no piston sleve wear can still see cross hatch looks beautiful... Guess I need to see if crank is good but... it looks beautiful! any considerations advice to offer?

@thomasjehnkins1986

2 жыл бұрын

I did notice towards the end, after I would shut it down, I could smell a weiiiird, very sharp, acrid odor...no smoke or anything tho

Do you buy a main jet for a walbro carburetor for 22.90 plus shipping or do you buy an entire after market carborator for 16.00 free shipping? I seriously don't know why things are priced like this

Glad to see Slippers Happy, how about a link to the website where he found his woman?

Thanks for the info my friend. I will bookmark those sites. I have an old Krohler 8hp and I was surprised when you brought that up on the site. Very cool! :) I lucked out recently on eBay when searching for head gaskets for an old Onan. I like to take an extra step and get the part number from the manufacturer and search eBay or even Craigslist. Once in a while you get lucky, but you gotta be careful and read the fine print. Very time consuming but helpful if you're really pinching pennies or if you got something obsolete. By the way I know a nice girl from the interscreen that's looking for a guy. I'll give you my P.O. box number if you wanna mail a check for more info lol! ;). I'll accept PayPal too! Hee hee hee!

Ok Taryl I looked the number for this b&s coil 394988 and it’s no longer available so do I just throw the motor away or what .?

Propartsdirect.net seem to have no parts for Poulan Pro... :(

Great advice again.

Anyone know how to get a needle and seat for a Generac pressure washer carbitrater? They are vague on who makes their stuff and only want to sell me a whole carbitratot

how do you find parts for john Deere mowers

Mr Cameraman always sounds so enthused lol :p i imagine a napoleon dynamite lookin dude like whatever man im jus here jus collect my paycheck n hit the dispensary :p we love ya Mr Cameraman

Well Slippers, Taryl told ya!

Need HELP; Hashquvarna Rider 16 2000 with Briggs 15.50 engine. I need to take out the engine, I am stuck with the pullies on the shaft, can anyone please explain how to take out these pullies so I can take out the engine?

Great site that ProParts however they don't have a Gilson in the list.. sigh.. oh well guess I did not expect them to.

@ProPartsDirectNet

8 жыл бұрын

+MidwestMotoRider What parts do you need for your Gilson? Problem is Lawnboy bought them out then Toro Bought out Lawnboy. Depending on what you need I can do some searching for you!

@MidwestMotoRider

8 жыл бұрын

ProParts Direct Well its not charging so I suspect I will need a rectifier regulator and I maybe needing hydrolic hoses as these seem to weep. I for sure need new headlights I have seen some LED ones around any thoughts on where I can get some or if I can even adapt them to the DC/AC thing this Gilson has going on? I just got it so I need to go over it some more and see what else is needed.

@ProPartsDirectNet

8 жыл бұрын

+MidwestMotoRider I am sure we can probably get the rectifier for you. Send me your engine model number. Also send me the Gilson numbers. I can see what I can do. We would do anything to help Taryl's Friends!

@MidwestMotoRider

8 жыл бұрын

ProParts Direct Thanks I will grab that info tonight or tomorrow I am not sure where the numbers are so it may take some time! I do appricate your help and I will need some other things it turns out like a carb kit etc.. I will give you a full list when done it will only be one or two more items I suspect.

@MidwestMotoRider

8 жыл бұрын

+ProParts Direct Sorry for the delay, you know life gets in the way some times. :) So the model number of my 75 16Hp Gilson is blank, must have been cleaned off with time and chemicals. Here is what I have for the motor Model: 326437, Type: 0135-03, Code: 7512221 what I would be looking for on the motor at this time is a complete (or as close as I can get) tune up kit, Air cleaner filter, Rectifier/Regulator, Carb rebuild kit (the most complete kit I can get), later this spring I am going to go over the motor and may need some gaskets maybe some rings tho there is no sign of them being warn you just don't know what you will get into once there. For the mower its self (not sure if you can do anything with out the model number) Belts (all of them are bad), tires (front for now), blades for the deck (42" stock deck), the trans has a very small leak so I will eventually need to fix that seems like it maybe a hose not sure, Head lights would prefer LED if I can get them, Battery, may need more things once I start the restore this spring. I have sub'd your channel and will check out the videos over the next few days. Also if you want I have a video of my Gilson on my channel its the January 2016 Update video the Gilson part of the video is from about 1:05 min mark for about 7min's. Thanks again for looking into this!

I’m using the word inner screen now forever! Lol.

hey tyrl I have a weed eater and I cleaned the carb and it losses power when I open the choke and has lots of power when I have it on half so if you know it some tips to do can you tell me. and would it affect it if it doesn't have a air. filter or cover?

@TarylFixesAll

8 жыл бұрын

+Hector Avila Sounds like you need to open up the adjustment screws on the carb. If its a carb. with no adjustments then the only way to fix it is with a new carb.

@hectoravila784

8 жыл бұрын

Oh ok which way do I have to open it

@TarylFixesAll

8 жыл бұрын

Just remember this, think of those screws as water valves when you turn them out you give it more gas turned in less gas. So sounds like you need more gas so open them a little at a time. start with the one closest to the motor.

@grandmaarnold4144

6 жыл бұрын

Hector Avila

Lol! Why do they use those decal stickers for the mod #? I've accidentally erased them when I'm wiping things down. I wish they would stamp everything. I know better for the most part but sometimes it happens.

...now there's the carbitrator

the carbetrader lol

Briggs 130232-3130-01 on a powermate generator. can't find where to put the springs that were missing when i got it. diagram doesn't show squat

Where's your repair shop?

I adjusted it and now I can't put the choke at half open only full do I have to adjust something else

@TarylFixesAll

8 жыл бұрын

+Hector Avila Somethings wrong with the carb. the only way to fix it is to replace it. Sometimes these little carbs can't be repaired.

@hectoravila784

8 жыл бұрын

Oh ok thank you

carbatrator , is like a 'mator, second cousin to a tator

Does anyone have a site to translate the toro serial number's breakdown

Can you show the 2021 version of the website?????????

Thank you Carol oh by the way tell flipper I can use 10K

BEDALABOOP!

@brandonsizemore3619

5 жыл бұрын

Lmao

i need help finding a coil for a MYD snow blower 319 550 000 .can you help me out

those kids must keep u young :)

Tary is funny 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

Taryl, you make great videos and these videos have helped me immensely. Maybe you can direct me to the help that I need, this will be long and sorry about that but maybe someone reading this can help me out? I wish someone would do a video on deciphering the numbers on a Craftsman Eager-1, side discharge, 22" mulcher with a 4.5 Tecumseh engine. The only numbers That I have are: Engine tag: Model 143.034502 DOM: 03128CE0369 Engine Family: 3TPXS . 1482BA Deck Tag: Model: 917.387360 Serial: 050903M 063602 All I can figure out is that it was made in 2003, every site asks for "Spec number" and there isn't a spec number anywhere to be found on the engine tag or deck tag, found by me anyway. I cant find anything stamped anywhere on this engine unless the important numbers are hidden under the fly wheel. There are however plenty of other numbers but the searches and/or sites that I visit all have a diagram of finding the number/s that I need but there isn't anything on this mower that starts with a TV, OV, or any other letters I click on Craftsman and it automatically jams "Husqvarna/AYP" into a drop down box and then I can't find any familiar numbers off of the engine oe deck stickers. I have the carb off of the mower and can't find anything from the numbers underneath where the float is or from the crappy "Engraved" numbers on the flange the bolts to the intakes. This is all based on IF I am even seeing the correct, "Stamped" number on the carb. It looks as though Tecumseh gave a 5 year old, epileptic kid a dose of two Adderalls, a center punch, a soft blow hammer, and then instructed the kid to pound the numbers onto the carburetors, using only the center punch, soft blow hammer and the steady hand of this kid. It may be time for the Tannerite, my .30-06 and a hay field! Kidding, I will keep trying to find a number somewhere else but then, that is the definition of insanity, to keep doing the same thing over and over, expecting different results and this parts look up for what I need is driving me to insanity I will call Pro Parts Direct and see if they can help my dumb ass out Keep up the good work and humor Mr. Taryl, it's a PSA to idiots such as myself

@TarylFixesAll

7 жыл бұрын

You'll have to use the website : searspartsdirect.com to look up that 143.034502 Tecumseh engine.

@philyamascunt7518

7 жыл бұрын

Taryl Add my former problem to your list of "All that Taryl has fixed" You are now considered a God in my house, not sure what type of God but it's "Goodin" I will put your picture in every corner and every wall in my garage and I will put a big picture of you right above my bench! Kidding but sir, I do appreciate your help and fast response as the carburetor on my son's old Craftsman mower is in dire need of some fixin I figured that I could find the parts that I need from the few numbers from underneath the top of the carb, where the float covers up, just to look for a new carburetor, but no joy in Mudville with the legible numbers where the float is or the crappy number that was center punched on the flange Thank you again sir!

@tncountryboy06

7 жыл бұрын

any suggestion for Lifan engine parts

8:10

You guys been smoking something but it's working keep on smoking it. stimmers.

Cool...partsdirect.net thanks Tarl I need to buy a new conecting rod for a Toro zero turn with a Briggs % Stratton single cylinder Intec 16 hp...I checked for a loose carbitraitor screw but that wasn't the case. It does have a rod knock. Anyhow I will clean up the crankshaft and install the new rod. And get a new toothbrush for crying out loud...this crap is crappie

skip to 2:45 to start class

My Kamar-sake got stolen!

MY BRIGGS LAWNMOWER HAD NO SPARK I FITTED NEW COIL & PLUG REMOVED CUT OUT LEAD STILL NO SPARK : I THEN WATCHED YOUR VIDEO ON CHANGING COIL OVER TO ALTER MAGNETIC FIELD :? & JUST LIKE MAGIC I HAVE A GOOD SPARK .THANK YOU SO MUCH :

Slippers needs to be in marriage counseling already.

Poor slipperz

🤓🥰💖✨✨✨✨

As of 2020 there's a different login method

Make a video explaining the difference from the high pressure carb and the gravity carb you keep talking about it but never explain

What’s really bad is people really get scammed like that and worse it’s amazing how little common sense people have

@83newgrape there's your dinner

propartsdirect may be a good company, but in the age of Amazon, I'm not paying those shipping charges......

funniest shit ive ever seen

HEY!! Why can't we Canadians buy from propartsdirect?? You better wake 'em up so they get more business!!