How To Lay Up Carbon Fiber By Hand | Yacht Shop Creations
"How To Lay Up Carbon Fiber By Hand"
Howsy Creators! In this video Jim LaCourse showcases how to apply a large piece of Carbon Fiber to a Helm Station for a Yacht!
Thank you for watching our video if you got any value from this please hit the like button and subscribe to our Channel. If you have any questions, comment below.
If you are looking to get some custom work done by Yacht Shop Creations?
Give us a call at 954-909-0136
►SUBSCRIBE TO OUR KZread CHANNEL
⚡bit.ly/3ts0HEd
►FOLLOW US ON SOCIAL MEDIA
⚡linktr.ee/Yach...
⚡THE MUSIC WE USE
EPIDEMIC SOUNDS - bit.ly/3ncoggU (+ 2 months free when you subscribe)
MUSICBED - bit.ly/2X6md3x (+2 months free when you subscribe)
LINKS USED IN THE DESCRIPTION MAY OR MAY NOT BE AFFILIATE LINKS
By using the affiliate links we earn a small fee of your purchase, it does not cost you anything extra to use them. They help me to be able to create more videos for you. Thank you for the support!
Пікірлер: 24
Continue to do this please, I have been wanting to learn more about this sort of work and like you said there's not much on KZread.
@YachtShopCreations
3 жыл бұрын
Happy to do that as the projects come in. Jim
Great video. The level of care in getting the pattern straight really hit home with me. I would have never thought to use a straight edge! I will now though! Was there a follow up to this video? Where was this used?
if always the best
@YachtShopCreations
3 жыл бұрын
=)
Hi sorry, first love from the UK. I have a question about using carbon fibre as a hull of a narrowboat for the British canals and water ways. Could I use carbon fibre as a hull which not only needs to take hits from other boats but also from rocks and shopping trolleys under the water line. Sorry for my question I just looking for other options other then steel or aluminium as a hull. Not only do narrowboat have to be blacked every 3 years but the proof steel is so high right now. Plus I would love a narrowboat home as unique as myself. Thank you for your time 😘
nice tips my friend! I guess I gotta be lucky cause I want it to be perfect but realize it's probably way more tricky than I'm used to DMAX motion sim ch
@YachtShopCreations
3 жыл бұрын
Thank you 🙏
All of the videos I watch about carbon fiber and only a few show people wearing gloves. Maybe things have changed since I went through advanced composites? We were taught to always wear cotton gloves when handling or touching it and latex or nitrile when laying it up. The explanation behind this was the oils in your hands, along with any other contaminations will lead to delamns because improper bonding will occur. Of course this is more important when you have air flow exceeding the sound barrier but it was a requirement and they stressed the hell out of it. Fiberglass not so much but its still a best practice to use gloves, and new ones each and every time you work with it.
@YachtShopCreations
3 жыл бұрын
Hello Dave, Excellent points, thank you so much for sharing your knowledge! Jim
@mp6756
2 жыл бұрын
Your correct the oils in your skin can cause problems. The carbon give the strength not the resin, the resins job it to hold the carbon in place I don't mean that in a macro way but in a micro way. A dry layup is bad not good and a wet layup is bad not good. The carbon needs to be completely wetted out each and every fiber encased in resin without leaving excess resin behind structural or not. In my opinion If you want a glossy finish use a clear coat paint.
It’s true no videos of how to do large panel of carbon fiber. Good video
Im doing a layup on a mould thats an overfender for a car and has wide flares. What recommendations could you give me on that? Prior to layup, ill be spraying a UV clear in the mould the night before. Looks is the most important feature on this part, but it will get additional reinforcements.
@YachtShopCreations
3 жыл бұрын
How did the project go for you? Jim
@rubenrobles7275
3 жыл бұрын
@@YachtShopCreations im still working on dialing out the layup. I tried the layup with a watery epoxy, and it didnt come out too great, as I also could of let tack a bit more. But now ill be using west systems 105 for laying the cosmetic layer and then use infusion resin for the reinforcements. Any suggestions you have, I can definitely appreciate it!
So I guess the big mistake was going with the other #2 on the first try. Lesson learned. Looked like you trimmed before the cured green state. Am I right? So I assume the dry layup was to avoid troweling down? Not worried about floating then?
what's the progress on the ambulance build my good man?
@gerryfixit
4 жыл бұрын
I'm waiting on that too!
@YachtShopCreations
3 жыл бұрын
comming soon we will be posting an update!
Why not just spray it?
shouldn’t they be using gloves when touching the abrasive raw fiber
@YachtShopCreations
3 жыл бұрын
????? Have you ever felt how soft carbon fiber is???????
@YachtShopCreations
2 жыл бұрын
307Driftwood I received over 40k when that project was completed. Don’t be jealous about how much I saved by not using gloves. Please send me a link to your channel so I can become as intelligent as you and make less money.