In this video, I'll show you how I insulated the walls of my van. I hope you enjoy it.
Жүктеу.....
Пікірлер: 24
@nicola3060 Жыл бұрын
The drop cloth part 😂
@johnp91423 жыл бұрын
This video is siiiiiick. Go Brad! Great cameo Karl!
@TheDungineer
3 жыл бұрын
Awww thank Johnny P, miss you bud
@k6lsn3 жыл бұрын
Was thinking of doing the foam board and spray but probably doing reflectix instead of spray just because it seems easier..gonna put ribbing up also as my ol' Ford aerostar walls are phsyco and figure it will be straight to screw on panelling..and bam....lol... Funky grey brown black panelling from home depot to top it off..simple...ya, right..lol..enjoyed the vid and got me thinking so appreciate it, subd, ☮️ Wheelchair John in Idaho USA 😎
@TheDungineer
3 жыл бұрын
sounds like a plan!
@twohandsworking8962 жыл бұрын
looks good-quick note-a multi tool with worn out blade or grind teeth off works good for trimming cured foam
@TheDungineer
2 жыл бұрын
Hey thanks a lot! That was definitely one of the things I struggled with.
@hungrycamperfilms Жыл бұрын
Where does the moisutre end up going? What happens to that condensation moisture?
@girland2vandogs2 жыл бұрын
How has this insulation done in the heat?
@TheDungineer
2 жыл бұрын
It works really well! Luckily the van is white so it's pretty reflective of sunlight, and you really need to have reflective insulated sunshades for the front windows. Depending on how much you go in and out, it can be around 15° cooler inside than outside.
@girland2vandogs
2 жыл бұрын
@@TheDungineer thank you!
@OffTheBeatenPath_2 жыл бұрын
Any squeaking of the rigid foam?
@TheDungineer
2 жыл бұрын
Nope!
@OffTheBeatenPath_
2 жыл бұрын
@@TheDungineer great. was going to use that myself and thought it might squeak a lot
@oneofthedesertak39693 жыл бұрын
WHAT DID YOU USE TO SCREW THE WALLS TO THE FRAME?
@TheDungineer
3 жыл бұрын
Rivet nuts! Standard Rivet Nuts, Open End, 1/4"-20 Interior Thread,.027"-.165" Material Thickness www.mcmaster.com/95105A143
@oneofthedesertak3969
3 жыл бұрын
@@TheDungineer thanks for such quick response.
@BigAdam20503 жыл бұрын
Jokes on you. I like van shit.
@jessikafiller40283 жыл бұрын
Audio is veryyy low. Excellent video - saving for later!
@TheDungineer
3 жыл бұрын
Thank you!
@TheDungineer
3 жыл бұрын
Lemme ask you this, what level do you keep your volume set at? I mix with my headphones at 75%
@EvenTheDogAgrees3 жыл бұрын
Audio level seems a bit low?
@TheDungineer
3 жыл бұрын
Why can I never seem to get audio levels right?
@EvenTheDogAgrees
3 жыл бұрын
@@TheDungineer No idea. I only noticed because I'd just come from another video, and the contrast in volume was pretty noticeable. Doesn't detract from the video though.
Пікірлер: 24
The drop cloth part 😂
This video is siiiiiick. Go Brad! Great cameo Karl!
@TheDungineer
3 жыл бұрын
Awww thank Johnny P, miss you bud
Was thinking of doing the foam board and spray but probably doing reflectix instead of spray just because it seems easier..gonna put ribbing up also as my ol' Ford aerostar walls are phsyco and figure it will be straight to screw on panelling..and bam....lol... Funky grey brown black panelling from home depot to top it off..simple...ya, right..lol..enjoyed the vid and got me thinking so appreciate it, subd, ☮️ Wheelchair John in Idaho USA 😎
@TheDungineer
3 жыл бұрын
sounds like a plan!
looks good-quick note-a multi tool with worn out blade or grind teeth off works good for trimming cured foam
@TheDungineer
2 жыл бұрын
Hey thanks a lot! That was definitely one of the things I struggled with.
Where does the moisutre end up going? What happens to that condensation moisture?
How has this insulation done in the heat?
@TheDungineer
2 жыл бұрын
It works really well! Luckily the van is white so it's pretty reflective of sunlight, and you really need to have reflective insulated sunshades for the front windows. Depending on how much you go in and out, it can be around 15° cooler inside than outside.
@girland2vandogs
2 жыл бұрын
@@TheDungineer thank you!
Any squeaking of the rigid foam?
@TheDungineer
2 жыл бұрын
Nope!
@OffTheBeatenPath_
2 жыл бұрын
@@TheDungineer great. was going to use that myself and thought it might squeak a lot
WHAT DID YOU USE TO SCREW THE WALLS TO THE FRAME?
@TheDungineer
3 жыл бұрын
Rivet nuts! Standard Rivet Nuts, Open End, 1/4"-20 Interior Thread,.027"-.165" Material Thickness www.mcmaster.com/95105A143
@oneofthedesertak3969
3 жыл бұрын
@@TheDungineer thanks for such quick response.
Jokes on you. I like van shit.
Audio is veryyy low. Excellent video - saving for later!
@TheDungineer
3 жыл бұрын
Thank you!
@TheDungineer
3 жыл бұрын
Lemme ask you this, what level do you keep your volume set at? I mix with my headphones at 75%
Audio level seems a bit low?
@TheDungineer
3 жыл бұрын
Why can I never seem to get audio levels right?
@EvenTheDogAgrees
3 жыл бұрын
@@TheDungineer No idea. I only noticed because I'd just come from another video, and the contrast in volume was pretty noticeable. Doesn't detract from the video though.