Struggled with mine for two days until I watched your video. Ten minutes and I was done. Great idea and perfectly presented. Thank you so much!

@Scooterswapshop

Жыл бұрын

Thanks! They’re a pain!

Very good my man. Simple and to the point Thank you much

Fantastic , thanks guys !

Very helpful thank you

Hurry up we can't wait!

@Scooterswapshop

3 жыл бұрын

thanks!

Thank you

Could i install a kickstart on a 4t piaggio zip?

I’ve rebuilt my Kickstarter three times like by replacing the gear and spraying and it won’t never spring back and now it doesn’t Engage until like the kickers halfway down any idea what’s going on I’m so sick of replacing the kicker gear and spring for nothing

My clip keeps coming off when I go to hook the spring up it almost acts like there is too much tension or am I doing something wrong

Thanks

thx man

Thanks for the vid! I just bought the Stage6 MKII clutch from you guys. It worked great on my other bike. On the nx50, it will rev up to about 4500 rpms and then engage and then the engine struggles to move the bike much at all. Do I need to back off the tension on the clutch springs?

@Scooterswapshop

3 жыл бұрын

Yea it may be engaging too high but it’s going to depend on each and every engine setup

@jackrutherford-1

3 жыл бұрын

@@Scooterswapshop it's a new to me bike and despite running fine with the new carburetor and main jet I put in - it decided it was going to run rich today. After I messed with the clutch 18 times, I decided to put in a smaller main jet. Now it runs great again. But I swapped back on the original clutch so I got to put the Stage6 back. Dang thing!

where can i buy the thing next to the half sprocket? drive face or simething mine doenst have that 0_0

Nice vids guys. Did u ever get ur hands on a knock off malossi mulitavar variator?? I have seen one but its not beying sold in.y country. Parts are super expensive so i thibk of buying on if incan find it. Many thanx.

@Scooterswapshop

3 жыл бұрын

don't mess with knock off parts. buy real or not at all

@guidosamson682

3 жыл бұрын

@@Scooterswapshop i have real mhr polini and hebo. I just want to test it

No bearing in kick cover?

@Scooterswapshop

2 жыл бұрын

Kicker covers stock do not have bearings

What’s a good carb ? for a sym dd50 build with 72 corsa,arrow exhaust Keli clutch, Keli variator with 5.5/6g weights. Got 1500 contra and yellow polini clutch springs?. It runs good hit 62 top speed. But it runs a little high on the temp around 350. What carb would you recommend? I have a obo carb with 50 pilot and 142 main.

@Scooterswapshop

3 жыл бұрын

Give the shop an email or call we can help!

Cheers for that... Your trick fitting the kick start spring worked a charm on my Gilera runner 70cc. I didnt have any wood so just did it in my lap, but the spring is installed, my kick start is working sweet and all fingers are intact. Love the channel im watching from the U.K 😎👍

@Scooterswapshop

2 жыл бұрын

Glad it helped

I need help with my mini super pocket bike 107cc

@Scooterswapshop

2 жыл бұрын

nothing we can do for that

Been here 3 hours trying now I give up I’ll run without one

@predator_boiz336

Жыл бұрын

LMAO!

Ok now make a video on how to install it

@Scooterswapshop

2 жыл бұрын

That’s literally what this video is

Pauulllllll

@Scooterswapshop

3 жыл бұрын

haha

🤪

@Scooterswapshop

3 жыл бұрын

thanks

Lube everything? Really? 🤣🤣

@Scooterswapshop

3 жыл бұрын

100%