Many thanks, rebuilding the engine was the easy part. Installing the kick start was kicking my butt.

7 years on and this video helped me fix my 100cc atv no more slipping when i try to start it and saved myself £65 by watching this, great advice thanks man!

2 weeks of wrestling with this kickstart spring mechanism and I found out that I was trying to clip the spring onto the wrong part of the gear. I watched this, and in 8min got it assembled and ready to go. Thank you!

Thank you. I worked in engineering. Spent 20 minutes over complicating this procedure. Thanks for making it easier.

Your tutorial was executed exceptionally well, and it really saved me when I needed it.

@49ccscoot

9 ай бұрын

Thanks for the kind words. Glad it helped!

Vielen Dank für das Video, konnte so endlich mein kickstarter reperieren 😊

Greetings from Slovenia! I've had the same problems on piaggios, but your technique helped me a lot. Thanks !

Thank you that’s a lot easier than fighting with screwdrivers

This was an EXCELLENT Video. I love how you quickly got to business and didn't waste my time. GREAT JOB! Thank you very much.

@49ccscoot

8 жыл бұрын

+Jerry Mabe Thanks!

Hey dude I’ve said this before but your video really do help a lot, you explain things in plain English & in depth, I am mechanically minded but you’ve helped me more than you will ever know with your videos. 👍

@49ccscoot

2 жыл бұрын

Glad I can help! Thanks for the comment!

Greetings from Germany, I had the same problem on my Yamaha Neos 50 4T and your detailed video solved the problem. Thank you very much ... Hans

Greetings from Northern Ireland. Superb video - thank you. Seeing it done is so much better than trying to understand the manual!

nice video! helped me out along I'm working on my kids bombaier 90ds and could not find any info on the kick start parts! but now I know thanks!

Thanks so much,we were just given an old two stroke 50cc wheeler and I had no idea after I pulled that off and it fell apart.now I got this w your help.

This video is nice, I love how you name each part and each tool needed, so if any need to be replaced I know which ones to order. Bless you dude.

great simple video. Thanks. going to try the tip of moving the kickstart to 2 oclock :)

Thanks Bro. Worked great on my 2012 BMS 50. TUCSON AZ

Thanks for this video. It saved me alot of time.

Once again another great video keep up the good work

I have a 2001 artic cat dvx 90 name brand with this set up and i couldn't finda any videos on replacing the kicker thanks it helped alot and explained everything perfectly

Thanks, your video helped me a lot today. Many many thanks

thanks very helpful i had a right job on until i watched this and good of people to take time helping out

best kickstart assembly vid on youtube

Very good teaching and demonstration in this video. Thank you. (Thumb up and subschribed.)

Great video! Thanks for sharing.

very good and informative, keep it up

Thank you, very good!

thank you very much for your program served me very much for your videos now I repair my moped thank you very much

Great help for my Rex!! Thank you

@49ccscoot

6 жыл бұрын

Glad it was of use!

Thanks man!

I like, thank you.

Thanks really helpful!!

So, I finally pulled the trigger n' got a zuma 2stroke, but the kickstart spring is toast. Glad ya made this vid. :D

@49ccscoot

9 жыл бұрын

Nice choice!

Good tutorial

good explanation

Thanks, just replaced the kicker on a Kymco Agility 50. Hardest part was getting that snap ring on and off. I didn't have one of those tools. After 3 years of kicking (started died in summer 2018), there were almost no teeth left on the spindle. Note though: it took me a while to get the last piece on. I didn't realize the teeth on the spindle are missing a few on beginning and you have to go past that to seat it correctly. That was a 15 minute head banger for me.

Thank you

thank you

Thanks for the vid! After thinking it was fixed and all back together just to find out the spring had to much tension.

@Higgi63

2 жыл бұрын

Have another problem now. Hopefully you can help! Went back together, I did take it back off to check what it could be im unsure though. Theres a rattle coming from insude the clutch housing. I think its that small gear that insets at the end. Just not making sense. Any ideas?

Thank u lot...

Best installation video Ive seen on utube cheers bro

Hallo 90GTVert gutes Video Daumen Hoch und ein Gruß aus Deutschland von Roller Rolf

+Shark S You should be able to find something at a hardware store like Ace or a local Mom & Pop place that would work. The start shaft should be about 15mm OD or a little under 5/8".

@mdsoto3893

5 жыл бұрын

90GTVert Hi Thank you for all your work and video very helpful I have a scooter propel delray I can’t find the drive belt for it Could you be very kind and help me Model 139QMB MD50QT-11 Engine CSJMCO.05R22 Thank you

Bom video parabéns

Thanks, I just got my son a brand new Outlaw 50 and I wanted to see how to get that kickstart off that way my son won't accidentally step on it on the bike is running.

Thanks for your quick reply i may have to look into it as it dosent seem correct, and what i mean about the belt lining up, is that if i was to put a new belt on it would not be straight the part which connects near the variator would be slightly to the left and off centre

Bro thanks sooo much 2023

U make it seem so easy

@49ccscoot

2 жыл бұрын

It's really not that bad. I have done it a hundred times though.

@captaincuk214

2 жыл бұрын

Bro i have tried it and im never doing it again, i had ti use clamps and stuff🥵

Very god.👌

great help, my brothers, friend's 100cc stop working suddenly. Blew a gas line, and I fear that the piston might have something blocking it from moving back down, took cvt off, im a car guy so I only thought that the drive belt broke

Tankssssss

You make it look too easy!

i see haha thanks for the advise!

Thanks very much for your help, i will be doing this when the motor goes back in my scooter, how has the cvt belt worked efficiently whilst its been that fat stuck out?

Tenks

Ah the old vids.

Top vou faser na minha comprei resolvi abrir o encacho ta no buraco redondo todo errado valeu agora com seu vidio vai ficar srtinho agora valeu espirito santo

Nice one R save me a little bit of confusion I had and posting on the forum

Nicely done my brothrt ! I was opposed to adding Gy6 turbo kit on my 150cc 4stroke ! I heard bad things . Hope you can talk me out of off the big job 🌟👊🔥🔥

@49ccscoot

3 жыл бұрын

From what I've seen of others doing it, it's not worth the effort or expense. A larger engine build or swap is likely to be an easier option.

i used the Zip Tie Belt after i completed the assembly to pull the spring, it was super

@johaninpattaya4192

4 жыл бұрын

Oh and did it work out well

@22403709

4 жыл бұрын

@@johaninpattaya4192 perfectly

GOOD！！　FROM　JAPAN

Hello i wonder if you could help me i recently have taken my cvt cover of and had a look inside for signs of wear and to replace the belt, whilst checking the clutch i noticed i could pull it backwards and forwards is this normal? also my cvt belt is not level to the variator fan, do you have any suggestions, thanks

Thanks alot!! but i dont have the washer, where can i Get this?, what is the size ?

@Sarah-ti2qt

4 жыл бұрын

im also trying to figure this out! I cant find it on yamaha website either :/

Those splines don’t like to be hammered on. Sometimes the lever is not going on because the threads aren’t lined up just right and then a hammer will damage the splines. Better to wedge open the kick lever just a tiny bit with a slotted screwdriver. Then it will slide on easy with the grooves aligned. Anytime you go to use a hammer stop and think - there’s almost always a better tool for the job

@49ccscoot

2 жыл бұрын

True, but to be fair I tapped it on. I do often wedge a screwdriver in there and slip them on now, 9 years later, but what I did here wouldn't worry me. Hammering would.

Off topic. Just wanted to ask when changing the starter reduction gear in a 1e40qmb scooter, do you need to grease/lube it? Or does it work without any?

@49ccscoot

5 жыл бұрын

I put a small amount on the pin or inside the gear.

i have a gilera dna and i can not get the spring to go round far enough because there is too much tension, how do i solve this?

what kind of washer is the one that goes on the crank gear outside of the casing? the one the snap ring sits inside of. thanks!

@49ccscoot

4 жыл бұрын

Just a washer. Nothing special in it's design aside from perhaps it's dimensions (standard washers prob aren't going to fit because they're generally too thick to allow the snap ring to be used. Or are you looking for dimensions?

How do you deal with play in the kick start shaft? I put the washer and circlip but noticing there is grinding.

@49ccscoot

2 жыл бұрын

If there is excessive play, you can use a thicker washer and see if that's all it needs. If it the shaft can wobble in the bushing, then the shaft or bushing may need to be replaced.

Hey I've been looking for someone to work on one these and know about scooters I want to put one of these Eton on a scooter are they worth it or nah lol.its the 90cc one

@49ccscoot

2 жыл бұрын

So you wanna swap a 90cc ATV engine in place of the 49cc scoot engine? I've done that. They can be good engines, but it depends what you want. The 90cc stuff is good for making nice power while being a bit more mild mannered. If you want something race-oriented, it's easier to build something based on the 49cc generally. There are strong running 90cc setups, but lots of strong 70s and such as well that are easier to come by. 49ccscoot.proboards.com/thread/999/90cc-minarelli-engine-swap-info

on my 50cc moped the crank start for you jumping on it will not start up

Is a Kawasaki 250 atv basically about the same setup to replace the kick start

@49ccscoot

4 жыл бұрын

Sorry, but I have no idea. I will say that it's pretty similar for many kickstarts in CVT covers.

Lately my scooter's kickstarter sometimes doesn't quite pop back after being kicked. This starts to happen now more often and gives me problems starting my scoot. Is this just the spring issue or could be something else at fault?

@49ccscoot

9 жыл бұрын

Could be a worn out spring or it could be as simple as parts getting gunked up with belt dust and grime and not working. The gear that rides on the pin on the CVT cover has done this for me when it gets covered in crud.

Hi, Can you tell whats the problem... If i press kickstart slowly down it goes smoothly down but if i press it fast the kickstart ctv and the axel gets stuck. Its like hte Ctv dont go all the way down? I have pressed it hard as i can but it still looks like it isnt all the way down. Do you know the problem?

@49ccscoot

Жыл бұрын

You have to inspect it. It could be as simple as something that needs cleaning and grease. Could be that it's jamming up when kicked hard from possibly traveling a little farther than it should. I used to set my kick levers so they angled up, thinking it was easy to get a good kick. Turns out, that can be bad because you can put too much pressure on everything at potentially break stuff. Could be a gear issue. There is often a weld on teeth that can act as a stop. That's OK, but it's possible that it's placement is off a little. Check vs another one if possible.

I’m having a to f of trouble with the spring. Can’t get the flathead method to work

@49ccscoot

3 жыл бұрын

Sometimes the springs won't sit perfectly and kind of always look a bit skewed. If it works, it may be fine.

hello, when pulling the spring, it shifts to the right side, I align it with a screwdriver and it flies off. This may be due to fatigue of the metal of the spring, or I am doing something wrong

@49ccscoot

Жыл бұрын

The springs always try to go a little off course for me as well. A firm grip with vise grips should let you keep it where you want it till it's locked in better. Get everything basically in place and push on the gear to help retain it all before adjusting the spring and see if that helps.

@user-ox5nr8ui2t

Жыл бұрын

@@49ccscoot Thank you

hi I have a moped and the kickstart makes a horrible clicking noise. any I ideas what could be wrong?

@49ccscoot

8 жыл бұрын

If the noise is constant, something may be wrong with the spacing and it could be hitting a part that it's not supposed to contact till it engages. Sometimes dirty parts will hang up and cause this. A good cleaning and regreasing may be all that's needed. Inspect all parts for damage.

please subtitle in french lol i ask too much thanks you very much i understand like i can with picture thats good lol

Link to kickstart gear with bushing? Great video btw!

@49ccscoot

9 жыл бұрын

***** Both of these places carry them : www.partsforscooters.com/?partner=49CCSCOOT kaseaparts.com

@TraxorTV

9 жыл бұрын

I get the error "page not found." I live in Norway, Europe. Maybe that could be the case? I really need the kickstart, and i can't find anything online :(

@49ccscoot

9 жыл бұрын

The two links were close and it seemed to merge them so I edited it. They may work for you now. I thought parts would be easy for you to find over there.

@TraxorTV

9 жыл бұрын

None of the sites ship to norway so, but thanks for helping! :)

@49ccscoot

9 жыл бұрын

Sorry. Nothing at scooter attack, SIP, Adrenalin, or any of the huge suppliers over there? eBay?

Rebuilded the whole engine but at the kickstart mechanism i was scratching my head more than a hour. Got very frustrated because i knew it is simple but couldnt figure it out.

i have trouble pulling the spring, i cant seem to get it far enough

@49ccscoot

2 жыл бұрын

This is the easiest way for me. I haven't found a better way to do it. It may take a few tries and the vise grips need to be tight or it will slip before you get there.

@leksayt

2 жыл бұрын

@@49ccscoot nevermind i got it

Help me.I was kick starting my scooter and suddenly it started to make noise and then I started him with electric start and the kick starter also made noise and when I touch the kick starter it start to make really big noise like krrrrrrrk but very loud. What to do can u help me ?

@49ccscoot

4 жыл бұрын

First, just make sure the lever returns all the way. Beyond that, you'll have to pull the CVT cover off and see what you can find.

How much does the kick start gear cost? Mine was jammed after 12 years

@49ccscoot

4 жыл бұрын

Depends where you're buying. I haven't bought one for a long time, but I know some of the kickstart stuff is kind of expensive for what it is.

@carnitasgaming9809

4 жыл бұрын

49ccScoot I’m just looking to buy the kick start with the bushing

@49ccscoot

4 жыл бұрын

@@carnitasgaming9809 Depends what you've got (Yamaha or clone), but look at scootertuning.ca and partsforscooters.

What kickstart gear is that?

@49ccscoot

5 жыл бұрын

All stock kickstart parts for Chinese Minarelli clones.

I bought a kit and missing the washer for the the shaft(last piece) and I feel like it's not gonna work correctly

@49ccscoot

2 жыл бұрын

You're right. It will create too much play without the washer. That can allow the assembly to move inward and even contact the moving parts when the engine is running in some cases. If you don't want to buy a replacement part made specifically for it, you may be able to find something that will work in a hardware store.

@budski1366

2 жыл бұрын

@@49ccscoot thank you yea when I turn it the shaft just comes out alittle and I have another piece I don't know what it is it goes on the shaft has 3 corner like a triangle and it feels like it goes on top of the pinon shaft

@budski1366

2 жыл бұрын

@@49ccscoot I just put the image as my default and thank you for your response buddy just subscribe to your channel

@49ccscoot

2 жыл бұрын

@@budski1366 The part that you put a pic up of is for a 139QMB aka GY6 50 four-stroke. It goes on the crankshaft and the tangs engage a plastic fan.

@budski1366

2 жыл бұрын

@@49ccscoot damn I gotta watch a video I don't understand lol to be honest

I no this is old but if anyone can shed some light for me it would be much appreciated. I have a 110cc quad automatic and the electric start is completely gone. Is there anyway to add a kick start to it. It’s a long shot but hopefully someone can help me.

@49ccscoot

Ай бұрын

If it's a Minarelli engine like the one I'm working on in the video, then you should be able to install what's shown. If it's another type of engine, you're best bet is to look for variations of it that have kickstart and see if there's a bolt on option from other models.

@SaaV93

Ай бұрын

@@49ccscoot ok thank you for your reply I’m not sure if the make but the quad says hawkmoto all over it maybe Chinese. Appreciate your reply dude 🤙

@49ccscoot

Ай бұрын

@@SaaV93 If it's the pitbike style of engine, you can buy whole engines pretty cheap for those and many have kickstart. I wonder if there is sufficient clearance for the kickstart though. Look up 110cc pitbike engines. Repairing the e-start may be the way to go, depending how bad the problem is. Could just be a starter, which shouldn't be very expensive either.

my spring is really hard plz help

@49ccscoot

6 жыл бұрын

Just hard to install? Watch the vid or watch it again. The technique shown is the best that I know of. You can find other ways to wind it, but this is the way I prefer by far. Some other things I've done make it feel much tougher to pull.

So no grease ??

@49ccscoot

2 жыл бұрын

I usually grease the pin that the small gear rides on and the bushing/shaft going through the cover. Both somewhat sparingly, because I don't want grease to end up in the CVT.

I keep trying and trying with no luck

@49ccscoot

3 жыл бұрын

It's not the easiest job ever, but once used to it, it's not awful. If it is so tough that it seems to be impossible, maybe inspect the parts and make sure they are alright and also correct for the application. I have ordered springs before allegedly for a scoot and then what shows up is similar, but not the same.

Spring installing is fucking impossible

@49ccscoot

Жыл бұрын

As long as you've got good vise grips that aren't going to let go, it's pretty easy for me this way. There's a specialty tool for some, like Piaggio 49cc 2-strokes, but I don't think there are for these Minarelli engines.

@everythingbro4786

Жыл бұрын

Yeah mine is piaggio and with simple grips it’s impossible, a lot of force is needed and it always slips out.

@49ccscoot

Жыл бұрын

@@everythingbro4786 Check the tool out then. I showed it in one of my RC-One assembly vids. Got it at Scooter West IIRC. kzread.info/dash/bejne/lnZ4085ye8W0hKQ.html

Nope this shit impossible i wanna break it all

@49ccscoot

6 жыл бұрын

Hahaha. That's how I felt the first time I tried one without knowing what to do. Watch the vid again. Do it as shown. That's as easy as it's gonna get from my experience. After you do it once or twice that way, you won't hate it so much. Will probably never be your favorite thing to do.