How To Install Trunk Springs
Trunk spring install
Here's how to install a trunk spring for your car with just a few easy steps. Simple plug and play do it yourself. Thank you for watching and hope you enjoy the video.
Link to item on Lazada: c.lazada.com.my/t/c.YUzVdi?ur...
Music : / not-the-king-point-blank
This video is not a sponsored video
If this video was helpful, please give it a "thumbs up" and do consider subscribing
If you have not subscribed to my channel consider doing so
Click here : / @andrewsautofreakz
Subscribe for more videos.
You can also follow me on
Instagram: / andrew_aaf
Facebook: / andrewsautofreakz
Disclaimer:
Due to factors beyond the control of Andrews Auto Freakz , I cannot guarantee against improper use or unauthorized modifications of this information. Andrews Auto Freakz assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Andrew Auto Freakz recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Andrew Auto Freakz, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Andrew Auto Freakz.
Пікірлер: 246
One of the clearest DIY videos on KZread regarding trunk springs!
@Andrewsautofreakz
3 жыл бұрын
thank you so much for the feedback. Really appreciate it.
@simoncolson3503
2 жыл бұрын
You all prolly dont care but does any of you know of a trick to log back into an instagram account? I was dumb forgot the account password. I would appreciate any tips you can give me
@eligianni348
2 жыл бұрын
@Simon Colson instablaster =)
@simoncolson3503
2 жыл бұрын
@Eli Gianni thanks so much for your reply. I found the site thru google and im waiting for the hacking stuff atm. I see it takes quite some time so I will reply here later with my results.
@simoncolson3503
2 жыл бұрын
@Eli Gianni It did the trick and I now got access to my account again. I am so happy:D Thank you so much you saved my account !
Senang betul nak kenal org malaysia ni, few second the start of the video, just by listen to the slang and the environment, mmg otomatik terus cam beb. Apa2 pun thumbs up and kudos for this dude. Sangat2 helping😁😁
@Andrewsautofreakz
4 жыл бұрын
terima kasih untuk comment. saya memang orang malaysia bro. harap video ni dpt tolong anda. tolong support channel dan jgn lupa subcribe. thanks bro
@wansyahmi3401
4 жыл бұрын
Sama la Terbukak video ni kenal dah mamat ni dari malaysia hahaha
Thanx for the idea.. tried it on my 97 civic.. works perfectly!!
Thank you for explaining it in such detail! I was skeptical about this thing cuz it only cost less than RM15 for 1 pair of springs and seller did not say how the mechanism works. Thank you for making this video!
@leochaistudio2894
Ай бұрын
I bought a pair that only cost RM3.33 at Lazada, lol~ 😂
Terima kasih buat video ni, saya dh pasang ikut tutorial tuan. 👍👍
Great video ordered mine on eBay seems pretty easy to install thanks........
Thank you very much for the video! I ordered these and had no idea how to install them. I actually only needed one for my elantra and gave my second one to a friend
@Andrewsautofreakz
2 жыл бұрын
Glad the video helped. Don't forgot to support the channel but subscribing and smashing that like button
Didn't know these existed. Clever design.
Thankyou Great video my friend Totally helped me install on my new accord Take care
Thank you! It works like magic!
Thank you. I will definitely do this to my car
Glad i found your video. I bought the springs but the shop says that they cannot install it.they said it is for local cars. I installed it as per your video & it works like a champ.thanks man.
@Andrewsautofreakz
4 жыл бұрын
im glad my video was helpful. thanks alot. what car do u have?
@nizam1402
4 жыл бұрын
@@Andrewsautofreakz mine is Hyundai i40, the boot lid mechanism is the same as your car
@rodrigodiaz872
2 жыл бұрын
Andrew man where can i buy that exact spring? Is that available in the US?
very good video with clear guide especially on tighten the tension spring and lock the nut which is the key to the installation, Thank you bro👍
Niceee.. i just bought one , this really helpful 👍👍👍
Thank you for this great video, you will be happy to know i now have a functioning trunk thanks to you
you make very great video that's right to the point and not corny like other youtube's i've seen. Thank you!
@Andrewsautofreakz
2 жыл бұрын
Appreciate the feedback. The best so far. Thank you for the support. Don't forget to Subscribe to my channel while your at it. Thank you again
@youhavebeenhacked88
2 жыл бұрын
@@Andrewsautofreakz you are or you're
Thanks for the vid, installed mine today in a 2006 Acura TL. I knew what to do after watching your video
@Andrewsautofreakz
Жыл бұрын
Glad it helped ❤️
Good work.Excellent.👍
Thank you. Well explained.
OuuH! I own a Kia Forte 2011! Im gonna try this out =D
Ur accent is very good
Thanks for sharing this, like it
terbaik bro! thanks for sharing
Tq bro..very helpful 👍🏼
@Andrewsautofreakz
3 жыл бұрын
appreciate the support. dont forget to subscribe for more content.
perkongsian yang bagus.. terima kasih.
@Andrewsautofreakz
4 жыл бұрын
Thank you for supporting the channel
@SaifLepai82
4 жыл бұрын
@@Andrewsautofreakz welcome.
Good video. Thanks.
@Andrewsautofreakz
5 жыл бұрын
ObamaBinLyin appreciate it! Don't forget to subscribe to my channel and hit that like button. 👍🏼
Nice bro..good info.
@Andrewsautofreakz
5 жыл бұрын
TheManse787 appreciate it!
Very kool!👍
Thank you your video helped me a lot very useful
@Andrewsautofreakz
Жыл бұрын
Appreciate it. Don't forget to Subscribe to the channel and support
Great video Brother
Thanks good video.
@Andrewsautofreakz
5 жыл бұрын
Gandul # much appreciated. Don't forget to hit the like button and subscribe to my channel. Thank you
Good job bro
Thanks dawg
TQ bro!
Dude, I love your accent.
@Andrewsautofreakz
2 жыл бұрын
Didn’t realize I had one. Thank anyways. Don’t forget to support the channel by hitting the like button and subscribe.
@Jetski_Journals
2 жыл бұрын
@@Andrewsautofreakz I sure will!
Thank you bro
Nice video ...subscribed 👍👍
@Andrewsautofreakz
3 жыл бұрын
Appreciate the support
Thank you brother!
@Andrewsautofreakz
3 жыл бұрын
Thank you! Don't forget to Subscribe, Like and Share for more videos
Your intro music is crazy loud!!! Nice video.
Nice
Very nice video sir
@Andrewsautofreakz
3 жыл бұрын
Thank you very much. Appreciate the support
Tnx bro...
thanks good vid man they have something universal for aluminum front hood accord 2017 honda
Thx for the guide bro! It is very helpful~ 😊
Bro, i believe if u loosen the springs little bit it will open super smooth.. by the way thanks for sharings bro.. im gonna get mine now..
@Andrewsautofreakz
3 жыл бұрын
True. But over time it will be ok. Since its new it will be hard at first. Appreciate the support
@zulfikranzulmos4066
3 жыл бұрын
Biase lah brg bru
Tqsm bro diatas perkongsian. Saya dah beli tapi tak pasang lagi sebab tak tau cara pemasangan😅
@Andrewsautofreakz
2 жыл бұрын
Takpe, boleh cuba satu dulu. Tapi saya rasa kena pakai dua2 sekali. Harap boleh berfungsi dengan sempurna
Thanks.
Nice good idea ..👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 100 star
@Andrewsautofreakz
4 жыл бұрын
Jaya Gading thank you for supporting the channel!
Good video
@Andrewsautofreakz
3 жыл бұрын
Appreciate the support. Don't forget to like and subscribe to my channel. Thank you
Man i wish i watched this video sooner I spent 2 hours trying to attach it 😢😢😢
I'm ordering one for my wife's Altima😁😁
This might be overly obvious, but you want the spring stretched/tensioned when the trunk lid is shut so that when opened/tension is released, and it will return to neutral state in the opened lid position. Closing the lid will tension the spring again, ready to spring open. The positioning of the end points in the trunk need to ensure the closed position creates tension. Accordingly, it is not necessary to tension the spring in the open installation position as long as closing the lid will in fact extend/tension the springs.
@Andrewsautofreakz
2 жыл бұрын
Indeed you don't have to tension however tightening it in the beginning will help so that the spring is not loose when they is no tension if not it will fall off easily. Thanks for the advice truly appreciate it. Appreciate the support
I think I'd put a strut on it to slow it down a bit as it opens. It seems almost violent opening. Just my thoughts. Nice job my friend and thanks for sharing.
@Andrewsautofreakz
5 жыл бұрын
Anthony Fejeran I noticed too but if I didn't, it would have not open as my bonnet is heavy
@anthonyfejeran1891
5 жыл бұрын
@@Andrewsautofreakz I gotcha. Might be a cool little update and how to. Just a thought. Thanks man.
Mula2 sebelum tekan video ni, ingatkan overseas, bila tgk je environment terus nampak kat Malaysia 😂
@Andrewsautofreakz
2 жыл бұрын
Support local youtuber please
thank you so much just bought got them today and no install instructions
Noooice
@Andrewsautofreakz
2 жыл бұрын
Appreciate the support. Please don't forget to Subscribe for more. 🙏
Turn down the intro volume!
Forte Kai
Muy buen video en donde los consigo amigo
@albertotorres8528
5 жыл бұрын
es.aliexpress.com/item/32856472322.html?spm=a2g0o.detail.1000016.1.26d82540o3k1E9&isOrigTitle=true
Bro, can show this for Honda Civic 2017 guide ?
Great video! Your trunk only bounce twice when it opens. Unfortunately for my car, the trunk will bounce so many times so hard it feels like it's about to come off! And I only install 1 spring!
@Andrewsautofreakz
2 жыл бұрын
Wow. Only 1? Must be a light one
@anthonychew631
2 жыл бұрын
@@Andrewsautofreakz Yes, the trunk is very light.
Thanks does this tool available for mitsubishi Lancer within spoiler
Great video thanks so much. I am not worried about my trunk opening up fully. But I am removing my trunk rods to install a better subwoofer on my rear dash. If I remove the rods for the trunk will I need the springs ? Because it will be difficult to open and close without them? Like will the trunk now slam down?
@Andrewsautofreakz
2 жыл бұрын
Not too sure. I guess it's trial and error
Boss , ade toturial cara pasang persona 2020 tak ?
Oh yeah sollunga 💦🔥
One of my torsion bar in my Honda accord is broken (cracked) and I can't buy it since it is discontinued. Will this work without one the Torsion bars?
First comment..yeay..how much is the price ?
@Andrewsautofreakz
5 жыл бұрын
AniqHilman TV a huge 👍🏼 and a hug bro! ❤️
Would this work on a BMW E90?
your intro killed my next door neighbours
Nice bro! Thanks for sharing. I was wondering if it wouldn't have been better use only 1 spring in your case, it seems to be very strong opening.
@Andrewsautofreakz
5 жыл бұрын
Nícolas Koutroularis indeed it is. But I had to use 2 as 1 wasn't enough to lift the weight. If I used one I had to tighten the spring but I was afraid it will damage the bracket
@helookalikaman79
4 жыл бұрын
uneven force on the trunk lid...
I like the fake supreme
@Andrewsautofreakz
4 жыл бұрын
Hi Was so do I 😉
is it possible to install these springs in Avanza MPVs?
It opens too violent, reduce the tension a bit so it would open a bit Softer like OEM.
@Andrewsautofreakz
5 жыл бұрын
Brandon R I tried but if it's too loose it won't lift it. Maybe for mine it's such for others maybe different
Will it's work on Swift 2016 model?
Thanks for the tutorial bro! Did exactly like you showed but it opens up way up too fast. Tried with 1 spring but it won't open. Even if I do it super tight. Any idea how to adjust?
@Andrewsautofreakz
2 жыл бұрын
If it's tight it will be hard when open. You have to play with the placement or adjust the spring to abit loose
@flubFTW
2 жыл бұрын
@@Andrewsautofreakz thanks for the speedy reply. I tried with two springs. Fairly loose. Even still it was too aggressive when opening. My car's a Vios 2021 but the layout seems about the same as your car.
@Andrewsautofreakz
2 жыл бұрын
@@flubFTW mine in the beginning was aggressively opening as well but after awhile it was ok. I guess it needs to reach a point to help open. Unfortunately it's not like hydraulic.
@dietterzambrana6952
2 жыл бұрын
Add a carabiner on each side to add space. That way you can install it completely loose but it would still be secured in place. Should help ease the tension.
Andrew i like your video but i dont know where to buy that spring. Is that available in the US?
@Andrewsautofreakz
2 жыл бұрын
Not too sure, maybe you can try to find it on Amazon?
Any idea how to stop the twang and clang noise when closing? Not as effective on evo 5 lol
@Andrewsautofreakz
3 жыл бұрын
Not sure how much maybe you can try a sound damper materiel at the corner of the spring? Maybe the metal and metal hitting sound that's why
That spring work on sonata 2006? Where can buy it? Thanks
@Andrewsautofreakz
5 жыл бұрын
Elide A I’m not sure if it will fit. But if it has hinges that are similar it should. I got mine from Lazada. Link is in the description 👆
Can I use it for a classic car
That's a gate spring you can get them from DIY shops for cheap
I know I'm late to the party, i installed 2 but it doesn't want to pop up? Any advice?
@Andrewsautofreakz
16 күн бұрын
Check the tension of the spring maybe it's too loose. Or check the location of the spring if it's correct. Appreciate the support on the channel as well
I think one spring is enough because after install the two spring is more tight and teunk open more freely it can cause a damage of trunk hinges.
@Andrewsautofreakz
Жыл бұрын
The tightness can be adjusted.
is it working if i have gas springs and not that kind of trunk opening? (Kia Optima)
@Andrewsautofreakz
5 жыл бұрын
I'm not too sure about that... If there is already hydrolic I don't see why u need the spring
@DIY-Mechanic
5 жыл бұрын
@@Andrewsautofreakz it doesnt have hydraulic, it have gas springs, and they are there just to support when fully open. but when the trunk popping with the key, it's exactly like on your Forte.
@Andrewsautofreakz
5 жыл бұрын
Eli C if it has brackets like mine then u should be able to use those.
2:55 was dat a kissing sound 😘 😂😂
Does is work on almera? Can't find suitable place to hook
@Andrewsautofreakz
3 жыл бұрын
Shahril Izwan I'm not too sure. There should be an anchor point but if not then I'm not too sure myself
The ring didn't hold up on mine, it completely bent and snapped. Gonna try a stronger ring.
@Andrewsautofreakz
6 күн бұрын
I guess it's due to the quality. But the ring is not hard to get and replace. You can use a old Keychain ring
I want this in egypt... where can I get ??
How do u install this onto a honda city 2005 ?
There was very little tension on that spring and the trunk lid came up fast, should have just went to local hardware store found a spring for a couple dollars the length you need and pull it down with a pair of pliers, that would never work on my car I have a 67 Dodge Dart that spring is to wimpy!!
It item will working on is250. Do anyone's to know?
@Andrewsautofreakz
4 жыл бұрын
Not too sure but at long you have a place to anchor it, it should work
is there any risk of the spring flying off when you open the trunk? im just afraid it might fly into my face when i open the trunk
@Andrewsautofreakz
2 жыл бұрын
So far it has not for mine. I did mine and till today it has not come off or fly off
Sar ji milega kahan per spring ka kya naam hai
@arunkushwaha2880
2 жыл бұрын
Spring ka kya naam hai
@Andrewsautofreakz
2 жыл бұрын
It's called trunk spring
It used n All the cars . Where I buy it.
I just saw your video and was wondering what made you install these springs. I see in the video that your trunk lid torsion bars are there. Was one of them broken and that's why the lid doesn't fully open? My Elantra has one broken and it does not open completely. Thank you.
@Andrewsautofreakz
5 жыл бұрын
ismaelyt09 the bars are there but mine doesn't fully open automatically. Nothin wrong with it. It's just like that hence why I had the idea to install spring to fully automatically
You know exactly that it’s only need 1 spring to work, 2 is way to much tension and pressure
@Andrewsautofreakz
4 жыл бұрын
Thien Khuc I tried using only one first but it couldn’t lift the weight hence mine I had to use both
How do i buy the springs thank you robby
@Andrewsautofreakz
Жыл бұрын
U can look it up at the local online stores or Amazon
Will this work on my vw polo?
@Andrewsautofreakz
3 жыл бұрын
if im not mistaken your car should have hydraulics. but for hatchback cars i dont think it will work cause the hinge will not be the same
Sir please help me my trunk won't hold up i actually need a stick to keep it open. Will these work? Thank you in advance
@Andrewsautofreakz
4 жыл бұрын
JEFF TRUMP if ur trunk has and anchor point it will work
@jefreyvilla5254
4 жыл бұрын
@@Andrewsautofreakz thank u very much for the reply
@Andrewsautofreakz
4 жыл бұрын
JEFF TRUMP appreciate the support
@Lancevance02
2 жыл бұрын
I've been using a wooden dowel that u bought from the hardware store to keep my trunk open but it is embarrassing😆 the metal rod that helps keep the trunk open snapped and now my trunk won't stay open on its own.
How its works if a car dont have an remote auto open trunk?
Cakap melayulah senang
@Andrewsautofreakz
3 жыл бұрын
Sorry bro kalau u tak faham boleh je follow instruction seperti dalam video. Sama je kalau I cakap melayu atau english. Mungkin video lain boleh translate.