I know I'm late to the party, i installed 2 but it doesn't want to pop up? Any advice?
@AndrewsautofreakzАй бұрын
Check the tension of the spring maybe it's too loose. Or check the location of the spring if it's correct. Appreciate the support on the channel as well
@AniqHilmanTVАй бұрын
Long time no see brother..Hope to see more video soon 🎉🎉🎉
@AndrewsautofreakzАй бұрын
Thanks for the support brother!
@leochaistudio28942 ай бұрын
Thx for the guide bro! It is very helpful~ 😊
@Thedailynerd2 ай бұрын
Do all the replacements come with the new clips? If not can we use the old ones?
@AndrewsautofreakzАй бұрын
I guess it all comes with new clips attached.
@ThedailynerdАй бұрын
@@Andrewsautofreakz I already replaced it I had to use my old clips but it was easy to remove from the old piece
@AndrewsautofreakzАй бұрын
@@Thedailynerd appreciate the support for the channel.
@vlady37892 ай бұрын
Thanks from PR🇵🇷💪
@punisherm19893 ай бұрын
The ring didn't hold up on mine, it completely bent and snapped. Gonna try a stronger ring.
@AndrewsautofreakzАй бұрын
I guess it's due to the quality. But the ring is not hard to get and replace. You can use a old Keychain ring
@explorewithme13953 ай бұрын
when i turn on the parking switch it again come into its initial stage need your help
@Andrewsautofreakz3 ай бұрын
Never had that issue with mine. Have you tried other colors?
@jaytaylor70574 ай бұрын
Where do you buy these springs?
@Andrewsautofreakz4 ай бұрын
I brought from a local online e-commerce platform.
@mcr1755 ай бұрын
Thank you. Well explained.
@joelfernandes43666 ай бұрын
What about the other headlight
@Andrewsautofreakz3 ай бұрын
I did the same thing
@Laura611157 ай бұрын
You should go a little slower. How the hell can we see what you did around the open
@Andrewsautofreakz3 ай бұрын
Sorry it wasn't meant to be a tutorial. I'll try to make another video to show better
@Smoozable8 ай бұрын
Man i wish i watched this video sooner I spent 2 hours trying to attach it 😢😢😢
@virginiaswain23318 ай бұрын
Calvier Chev 2 door 2001 I need to take of the cover to change shifter ball?
@AndrewsautofreakzАй бұрын
Not too sure about the model of car.
@deborahshields70309 ай бұрын
Thank you for making this video. Very helpful!
@TaitoSeanOkamoto10 ай бұрын
Great video Andrew! This is Taito hehe
@Andrewsautofreakz10 ай бұрын
Appreciate the support!
@tenderpoison18210 ай бұрын
Omg thank you so much for this!
@Andrewsautofreakz10 ай бұрын
Appreciate it. Don't forget to hit that like button and support the channel by becoming a subscriber
@PANITA.1983KCORP10 ай бұрын
Wow🎉
@marcelinotaboada159010 ай бұрын
😅
@shivaramprasad516510 ай бұрын
Sir thank you for good video for detailing
@AndrewsautofreakzАй бұрын
Thank you, don't forget to drop a like and subscribe to the channel for support
@aiksengneah28011 ай бұрын
Hi andrew. If the car is fusso coated and has some water stubborn stains on white car, would this product removes the fusso ? And also after using this cleaning liquid wax, could proceed with applying another layer of fusso coat? Since they are the same family
@Andrewsautofreakz10 ай бұрын
This product will remove the fusso coat because fusso coat is wax base and this is cleaning liquid base. After cleaning with this u can use fusso coat but not immediately as will take time to cure
@mohamadfaizal-iz1uk11 ай бұрын
easy man...
@cynthiagarrison417511 ай бұрын
Thanks for the video!👌
@gailkellum832 Жыл бұрын
Thank you for a nice clear and bright video. Andrew, you did a great job explaining and demonstrating. As a 68 yo female, I was hesitant to tackle this. Your video gave me the confidence to try.
@Andrewsautofreakz Жыл бұрын
I am glad it made it easy for you, this is one reason why I like doing this. Thank you for the wonderful comment🙏
@michellefrench1702 Жыл бұрын
Your video was so helpful!! I wish I could share my before and after pics!!
@Andrewsautofreakz Жыл бұрын
I'm glad it could help. You can via Instagram and tag me if you want? My links are in the description 🙏
@pioneeryp5838 Жыл бұрын
Can remove watermark ??
@GoobyBuzz Жыл бұрын
Any idea where can I get the gear knob replacement? Or universal knob will fit?
@Andrewsautofreakz Жыл бұрын
I'm not sure if universal ones can fit. However I got mine online. Lazada/shopee
@tradz4446 Жыл бұрын
nice intro bro, I was wondering where you've been so long, welcome back champ
@Andrewsautofreakz Жыл бұрын
Appreciate the support. Good to be back. Just finding the time for some content now
@tradz4446 Жыл бұрын
@@Andrewsautofreakz cool, keep doing your thing bro🤝🏻
@andrewcunningham9256 Жыл бұрын
Nice video but for the love of god, take the wheel off the car! It is so much easier.
@Andrewsautofreakz Жыл бұрын
During the time I didn't have much tools to assist me with the removal. I feel that painting it on the car itself take off half the time. Good point for those who can remove it
@soviet_salsa2983 Жыл бұрын
amazing video. Simple and right to the point. got it replaced in under 5 minutes. ended up sucker punching myself when the nob came off Note to self when removing the nob: make sure that your face is nowhere near the top of it.
@Andrewsautofreakz Жыл бұрын
Sorry it happened to you the way it did. Actually I almost got hit myself too.lol
@mark6360 Жыл бұрын
Thanks for the vid, installed mine today in a 2006 Acura TL. I knew what to do after watching your video
@Andrewsautofreakz Жыл бұрын
Glad it helped ❤️
@Yaboii.Drewskii Жыл бұрын
Not everyone plug is the same size
@juddthomastadeo-wn2so Жыл бұрын
Thank you your video helped me a lot very useful
@Andrewsautofreakz Жыл бұрын
Appreciate it. Don't forget to Subscribe to the channel and support
@jorgereyes1535 Жыл бұрын
Gracias por tu video fue muy fácil y más si haces palanca para sacar la perilla gracias my friend
@tamaraspeed3265 Жыл бұрын
Didn’t show how the wires were hidden
@Andrewsautofreakz Жыл бұрын
From minute 7 I showed which part the wires were hidden
@aevanlee6270 Жыл бұрын
Thanks bro....I think it is time to change mine.
@srabastibasu2 Жыл бұрын
how do i do it in honda city?
@fatimamartinez5308 Жыл бұрын
You need to press the button to the side and the push up !!
@Andrewsautofreakz Жыл бұрын
That method would work too however the clips on the inside wouldn't make a diff if you press it or not
@fatimamartinez5308 Жыл бұрын
@@Andrewsautofreakz I ended up taking it off with the clips still on it but that’s cause the leather was so worn out ! But yes I agree :’)
@fatimamartinez5308 Жыл бұрын
@@Andrewsautofreakz either way ! Thank you ! You are a life saver
@tanboonchun2705 Жыл бұрын
How to replace internal bulb on driver
@Andrewsautofreakz Жыл бұрын
What bulb are u referring to? If bulb on driver means have to change driver... Hehehe
@ganeshnarayan5505 Жыл бұрын
Great video Brother
@H7assonS Жыл бұрын
Thanks man
@MuhammadNaveed-dq2th Жыл бұрын
I think one spring is enough because after install the two spring is more tight and teunk open more freely it can cause a damage of trunk hinges.
@Andrewsautofreakz Жыл бұрын
The tightness can be adjusted.
@maxlai2008 Жыл бұрын
very good video with clear guide especially on tighten the tension spring and lock the nut which is the key to the installation, Thank you bro👍
@roberteastment8479 Жыл бұрын
How do i buy the springs thank you robby
@Andrewsautofreakz Жыл бұрын
U can look it up at the local online stores or Amazon
@marinadeleon5970 Жыл бұрын
Thank you for the clear instructions definitely helped me a ton! Awesome video
@aiksengneah280 Жыл бұрын
Hi andrews. I would like to ask based on your experience. Do u experience unremovable black water stains or spots during contact wash?
@Andrewsautofreakz Жыл бұрын
So far for my car no, I have heard some had that issue maybe it's because they don't polish the car before applying this sealant. And some that don't buff off the sealant properly will leave a black mark when washed later on.
@aiksengneah280 Жыл бұрын
Ok thank you bro. Most importantly can be washed with contact wash. Are you using pH neutral shampoo? Did you spray on some maintenance fusso spray?
@Andrewsautofreakz Жыл бұрын
@@aiksengneah280 I do normal contact wash with pH neutral shampoo yes.
@pnyoutube5098 Жыл бұрын
Hi brother, how r u, I'm still having difficulty to fix the spring for my Bezza, can I drop by ur place or could we meet somewhere for you to fixup my car, really badly need it done bcz driving grab, so passengers need to use the boot...
@Andrewsautofreakz Жыл бұрын
That depends on where r u located. Have you tried to find a place to hook it and ring to a point?
@pnyoutube5098 Жыл бұрын
@@Andrewsautofreakz yess found both places but still having difficulty brother.. I'm around wangsa maju area
@pnyoutube5098 Жыл бұрын
@@Andrewsautofreakz the spring I brought from Shopee, like yours you could screw/unscrew it with ur hands for the length but I couldn't it was damn hard and the nut inside the spring was stucked, guess was a fake item that's why was only rm 5
@Andrewsautofreakz Жыл бұрын
@@pnyoutube5098 unfortunately I'm not from that area bro.
@jonathanbolivar478 Жыл бұрын
Hi my friend, how are you, I have a question in this video that the gearbox knob comes with the button on the right side, do you know where I can get it and that they have shipping?
@Andrewsautofreakz Жыл бұрын
Unfortunately it comes as a set with the whole knob. I guess you can check online
@azman2040 Жыл бұрын
This sucker could never be removed even with an APC wash!😭Had the coating on for 2 months and had attempt to remove it but failed terribly!
@Andrewsautofreakz Жыл бұрын
For some reason I never had that issue. Maybe because the layer of sealant to use should be thin and not heavy. The instructions say to apply a thin layer
@taranishree315 Жыл бұрын
👍🏽👍🏽👍🏽
@zackmcgugan2770 Жыл бұрын
Hahahahahah I literally had to take mine to minute lube last weekend and they put em on for free. They were just really stuck on the hooks and i didnt wanna break it pulling to hard bcs i wasnt exactly sure of what i was doing. So this video is a great idea bro
@Andrewsautofreakz Жыл бұрын
Appreciate it Bro. Do check out the full video up on my channel. Appreciate the sub and support ❤️
Пікірлер
I know I'm late to the party, i installed 2 but it doesn't want to pop up? Any advice?
Check the tension of the spring maybe it's too loose. Or check the location of the spring if it's correct. Appreciate the support on the channel as well
Long time no see brother..Hope to see more video soon 🎉🎉🎉
Thanks for the support brother!
Thx for the guide bro! It is very helpful~ 😊
Do all the replacements come with the new clips? If not can we use the old ones?
I guess it all comes with new clips attached.
@@Andrewsautofreakz I already replaced it I had to use my old clips but it was easy to remove from the old piece
@@Thedailynerd appreciate the support for the channel.
Thanks from PR🇵🇷💪
The ring didn't hold up on mine, it completely bent and snapped. Gonna try a stronger ring.
I guess it's due to the quality. But the ring is not hard to get and replace. You can use a old Keychain ring
when i turn on the parking switch it again come into its initial stage need your help
Never had that issue with mine. Have you tried other colors?
Where do you buy these springs?
I brought from a local online e-commerce platform.
Thank you. Well explained.
What about the other headlight
I did the same thing
You should go a little slower. How the hell can we see what you did around the open
Sorry it wasn't meant to be a tutorial. I'll try to make another video to show better
Man i wish i watched this video sooner I spent 2 hours trying to attach it 😢😢😢
Calvier Chev 2 door 2001 I need to take of the cover to change shifter ball?
Not too sure about the model of car.
Thank you for making this video. Very helpful!
Great video Andrew! This is Taito hehe
Appreciate the support!
Omg thank you so much for this!
Appreciate it. Don't forget to hit that like button and support the channel by becoming a subscriber
Wow🎉
😅
Sir thank you for good video for detailing
Thank you, don't forget to drop a like and subscribe to the channel for support
Hi andrew. If the car is fusso coated and has some water stubborn stains on white car, would this product removes the fusso ? And also after using this cleaning liquid wax, could proceed with applying another layer of fusso coat? Since they are the same family
This product will remove the fusso coat because fusso coat is wax base and this is cleaning liquid base. After cleaning with this u can use fusso coat but not immediately as will take time to cure
easy man...
Thanks for the video!👌
Thank you for a nice clear and bright video. Andrew, you did a great job explaining and demonstrating. As a 68 yo female, I was hesitant to tackle this. Your video gave me the confidence to try.
I am glad it made it easy for you, this is one reason why I like doing this. Thank you for the wonderful comment🙏
Your video was so helpful!! I wish I could share my before and after pics!!
I'm glad it could help. You can via Instagram and tag me if you want? My links are in the description 🙏
Can remove watermark ??
Any idea where can I get the gear knob replacement? Or universal knob will fit?
I'm not sure if universal ones can fit. However I got mine online. Lazada/shopee
nice intro bro, I was wondering where you've been so long, welcome back champ
Appreciate the support. Good to be back. Just finding the time for some content now
@@Andrewsautofreakz cool, keep doing your thing bro🤝🏻
Nice video but for the love of god, take the wheel off the car! It is so much easier.
During the time I didn't have much tools to assist me with the removal. I feel that painting it on the car itself take off half the time. Good point for those who can remove it
amazing video. Simple and right to the point. got it replaced in under 5 minutes. ended up sucker punching myself when the nob came off Note to self when removing the nob: make sure that your face is nowhere near the top of it.
Sorry it happened to you the way it did. Actually I almost got hit myself too.lol
Thanks for the vid, installed mine today in a 2006 Acura TL. I knew what to do after watching your video
Glad it helped ❤️
Not everyone plug is the same size
Thank you your video helped me a lot very useful
Appreciate it. Don't forget to Subscribe to the channel and support
Gracias por tu video fue muy fácil y más si haces palanca para sacar la perilla gracias my friend
Didn’t show how the wires were hidden
From minute 7 I showed which part the wires were hidden
Thanks bro....I think it is time to change mine.
how do i do it in honda city?
You need to press the button to the side and the push up !!
That method would work too however the clips on the inside wouldn't make a diff if you press it or not
@@Andrewsautofreakz I ended up taking it off with the clips still on it but that’s cause the leather was so worn out ! But yes I agree :’)
@@Andrewsautofreakz either way ! Thank you ! You are a life saver
How to replace internal bulb on driver
What bulb are u referring to? If bulb on driver means have to change driver... Hehehe
Great video Brother
Thanks man
I think one spring is enough because after install the two spring is more tight and teunk open more freely it can cause a damage of trunk hinges.
The tightness can be adjusted.
very good video with clear guide especially on tighten the tension spring and lock the nut which is the key to the installation, Thank you bro👍
How do i buy the springs thank you robby
U can look it up at the local online stores or Amazon
Thank you for the clear instructions definitely helped me a ton! Awesome video
Hi andrews. I would like to ask based on your experience. Do u experience unremovable black water stains or spots during contact wash?
So far for my car no, I have heard some had that issue maybe it's because they don't polish the car before applying this sealant. And some that don't buff off the sealant properly will leave a black mark when washed later on.
Ok thank you bro. Most importantly can be washed with contact wash. Are you using pH neutral shampoo? Did you spray on some maintenance fusso spray?
@@aiksengneah280 I do normal contact wash with pH neutral shampoo yes.
Hi brother, how r u, I'm still having difficulty to fix the spring for my Bezza, can I drop by ur place or could we meet somewhere for you to fixup my car, really badly need it done bcz driving grab, so passengers need to use the boot...
That depends on where r u located. Have you tried to find a place to hook it and ring to a point?
@@Andrewsautofreakz yess found both places but still having difficulty brother.. I'm around wangsa maju area
@@Andrewsautofreakz the spring I brought from Shopee, like yours you could screw/unscrew it with ur hands for the length but I couldn't it was damn hard and the nut inside the spring was stucked, guess was a fake item that's why was only rm 5
@@pnyoutube5098 unfortunately I'm not from that area bro.
Hi my friend, how are you, I have a question in this video that the gearbox knob comes with the button on the right side, do you know where I can get it and that they have shipping?
Unfortunately it comes as a set with the whole knob. I guess you can check online
This sucker could never be removed even with an APC wash!😭Had the coating on for 2 months and had attempt to remove it but failed terribly!
For some reason I never had that issue. Maybe because the layer of sealant to use should be thin and not heavy. The instructions say to apply a thin layer
👍🏽👍🏽👍🏽
Hahahahahah I literally had to take mine to minute lube last weekend and they put em on for free. They were just really stuck on the hooks and i didnt wanna break it pulling to hard bcs i wasnt exactly sure of what i was doing. So this video is a great idea bro
Appreciate it Bro. Do check out the full video up on my channel. Appreciate the sub and support ❤️