I've just installed these locks to my garage door. It took me a bit longer than 8:52 to complete, but without your instruction video, it would have taken even longer. Great vid.

@ultimatehandyman

10 жыл бұрын

Glad it helped Thanks for the comment

Thank you for this instructional video. I was going to install a simple gate bar with lock on the outside of the garage door before seeing your video. This is 100 time better and professional looking!

@ultimatehandyman

7 жыл бұрын

You are welcome. Thanks for the comment

@ultimatehandyman Job just complete. Way harder than I expected as the ribs on my garage door run along a vertical plane not horizontal like the garage door in your example. The door used to be automated, so there was all sorts of gubbins I had to deal with. Nothing a good set of pliers and my underpowered drill couldn't deal with. Thanks again for the video fella.

Excellent - thanks! I had been looking at the garage defender but it hasn't had good reviews. I didn't think these enfield bolts looked as if they were going to be particularly secure but your excellent video explains how they work so I'm off to buy a pair of these now. They are also far more discrete - don't scream "I have something worth nicking in here!". Cheers

A really great informative video, looking to purchase and beef up the garage security, already done the shed using the instructions given by him in his previous vids, keep up the great work.

@ultimatehandyman

5 жыл бұрын

Thanks Peter ;-)

Thanks Mate. Great video. Some good tips, I used a different manufacturer to Enfield (identical design), but same principles. Great way to show drilling holes from outside, and drilling holes without basic measuring with tape measure for holes. I had to adapt my fitting because of the ridges in my metal doors, which would have meant drilling through the fixings of the side of the garage door, so added a spacer, but it worked a treat. I will watch your videos again - just hope it doesn't hurt your actual business locally ! Also, your point about the size of the drill bits was really important. I had the right ones, but not necessarily for the right material.

@ultimatehandyman

6 жыл бұрын

You are welcome, Dave. I had a similar problem when installing these on another door, as the ridges interfered with the bolts, do I had to pack them off using washers. Thanks for the comment

Thank you very much, i was thinking buying this one and you are apparently the only one who shows how it works, very appreciated

@ultimatehandyman

8 ай бұрын

You're very welcome!

Thanks for posting such a great, easy to follow video. These Enfield bolts are brilliant too.

@ultimatehandyman

10 жыл бұрын

You are welcome Thanks for the comment

awesome vid. I was dubious about buying this lock as I was not sure how to install it where as a garage defender is easy but I have lawn in front of door so defender was not a ideal solution. now I seen this vid and have watched it 3 times I am confident on how to install it, and great job as I didn't think that I would find this video or tutorial for this type of lock. Thanks a Million

11 years later this is so helpful 😊 Great video. Will be installing soon. Thanks for the great video.

@ultimatehandyman

Жыл бұрын

I'm glad the video helped, best of luck fitting yours! Thanks for the comment 👍

@MacAudio74

Жыл бұрын

Actually, today is fitting day. Off I go. Will report back.

Totally fantastic video. This really helped me. Thank you for making the effort to share this 👍

@ultimatehandyman

6 жыл бұрын

You are welcome Thanks for the comment ;-)

Very clear and helpful video. Thank you. Some excellent practical tips. My garage door has wooden panels inside a hollow, rectangular steel frame. I will need to drill the 13mm hole through the frame assuring perfect alignment of the holes on each side, while also worrying about weakening the frame. I have the lock, but have not yet built up the courage to fit it!

@ultimatehandyman

4 жыл бұрын

I'm sure you'll be fine as long as you take your time with it ;-) Thanks for the comment 👍

We've just bought a house with a garage. After watching this video I'm definitely going to fit these locks. Good video :-)

@ultimatehandyman

10 жыл бұрын

It's well worth doing ;-) Thanks for the comment

Here are all the details: Tools Required: Drill bits : 3mm, 3.5mm, 8mm, 11mm, 13mm (metal and wood), 17mm (wood for metal inserts) Rivet Gun Marking paint Adjustable spanner (to tighten the bolts) 1. Mark the position of the lock 30mm up and 20mm in from the edge of the door 2. Holding the lock level spot the bolt fixing holes with an 8mm bit, remove the lock then drill fully 3. Temporarily position the lock on the door with the fixing bolts 4. Spot through the key hole with a 3mm drill bit, remove the lock and fully drill the key hole with an 11mm drill bit 5. Temporarily fix the lock to the door 6. Mark the tip of the extending bolt with some paint and turn the lock so the paint marks the position of the bolt hole 7. Drill the side of the door with a 13mm drill bit 8. Mark the tip of the bolt again, close the door and turn the lock so the tip marks the position of the hole in the frame 9. Drill a hole in the frame where the mark was made with a 13mm drill bit or 17mm bit if using the metal inserts. 10. Fit key hole cover using 3.5mm drill bit

Thanks for your reply. It does seem possible, especially with your method of drilling a pilot hole from the inside first. I'll give it a try! Great video by the way - very clear and concise.

Brilliant! I have been looking for the right hasp or lock and haven't found the right one until watching your video. Enfield not available in US, but same one is from Asec. Thanks much.

Installed this as well, Thanks for the video it does help alot! You can get things ready and know what to do step by step after watching the video. Speeding things up! At first I thought I was going to only install one. Was shocked when I saw the packaged contained 2 locks. One for each side haha. Since it wasn't mentioned on the listing online where I bought it from. Nice lock and better than the other brand replica of it which had a bad reputation. Had a bit of tough time when I had to drill the 13mm hole's for the dead bolts though. Cause my Garage door somehow had 3 layers of metal on the corner and had a canal grooving (I don't know the right term) and it kept on bouncing my drill bit. But managed to drill the hole and then just widen it abit using a dremel tool with a long cylindrical sanding attachment for metal.

@ultimatehandyman

5 жыл бұрын

I’m glad you found the video useful Thanks for the comment 👍

Wow what an amazing no nonsense detailed video, very helpful, thank you 😊

Really helpful video, appreciate you taking the time to produce it..

@ultimatehandyman

9 жыл бұрын

Gary C You are welcome Thanks for the comment

Excellent, wasn't sure if to get these or defender type locks. These are far more discreet, ordering soon and will watch the video before I start as some really good tips - thanks!

Brilliant well explained and demonstrated, thanks for posting

Great informative, simple to follow instruction. Good job fella

@ultimatehandyman

2 жыл бұрын

Thanks 👍

EXACTLY what i was looking for! excellent video as always. just to track down a couple of these locks!

@ultimatehandyman

10 жыл бұрын

Thanks for the comment ;-)

Nice one, Ive been wondering how to secure my garage for a while now, Greta vid and again Enfield sales must have gone up by you doing this vid, im going to buy these. Subbed as well, Cheers Pal

Been thinking about getting this set for a while, great video thanks

@ultimatehandyman

10 жыл бұрын

Thanks for the comment

Thanks for this very clear and informative vid. I'm getting some of these now.

@ultimatehandyman

7 жыл бұрын

You are welcome Thanks for the comment

Great, thanks. I have ordered the Enfield bolts today.

Really enjoyed watching this. And will give it a crack this weekend. Cheers for your time and sharing the video.

Wow these locks are amazing & alot less intrusive but really secure 👍🏻

@ultimatehandyman

5 жыл бұрын

Yes, they are a great way of securing a garage door ;-) Thanks for the comment 👍

Just to help others doing the job: I've just started doing this job but it's turned out to be harder work than I'd hoped! I'm putting one in each corner (keyed alike) to reduce the chance of 'peeling' where they pry open the corner and get through. I should have thought it through better but the effort in overcoming the obstacles so far will be worth it. The side of the garage door was double walled meaning the drill angle on the second wall would be off and I couldn't drill from outside in because the up and over is too close to the garage wall, especially when using a long 13mm bit. I managed it with a bit of bodging and guesstimate and got there in the end. A great product though! the only thing I'd improve is that the external part of the bolt should be wider I reckon so it spreads the pressure more. Thanks again for the video to Ultimate Handyman. The most useful channel I've ever found.

@ultimatehandyman

7 жыл бұрын

Thanks Joe, I was thinking last night about your scenario of having a wall at the side- I'm glad you sorted it ;-) Thanks for the comment

@sawdustandsurvival

7 жыл бұрын

In fairness to the company, they are intended to only be fitted at the bottom which solves the issue and if used at the top against a wall with a double walled garage door frame my dad says that a drill bit attachment which angles the bit could help. I'll use his for the second top bolt. The garage door will be so much more secure though as a result. It needs it as it's at the bottom of a fairly long garden opening on to a back street. So far I've not really used it to store anything worth stealing but it'll give me proper use of my garage once complete. Thanks again for the video. I wouldn't have been aware of the solution had I not seen it.

@stepawa

6 жыл бұрын

I'm going to install at top corners now.. had these on my door for years at bottom ....wasn't aware of 'peeling'.... Cheers thanks for video :)

@iandaniel3130

6 жыл бұрын

Same issues here with double skin on door sides, also had to mount the locks 1/3 way up the garage door from the bottom because of internal shape not being flat. Also had to contend with a seam all the way up the centre of the left and right edges of the door inside. Another point to note is the 2 main bolts to hold the lock on the door are 8mm, however, they have a square locator (bigger than 8mm) that must also pass through the 8mm hole. The manufacturers' advice was to simply tighten up the 8mm bolt and allow the square to indent in the door. I preferred to drill a larger 10mm hole instead so not to crease the door in any way upon tightening the bolt. Worked for me.

@tonygabis

5 жыл бұрын

@@iandaniel3130 I think that's what I'm going to have to do. Without doing that, lock gets so stressed the the key won't turn in places. Will probably try 11mm because that is the diagonal size of the square locator and it should locate into the square slot at the back of the lock.

Top man. Just bought some of these and this vid is spot on Cheers pal 👍👍👍

@ultimatehandyman

4 жыл бұрын

You are welcome Thanks for the comment 👍

Top demo - made the job easy for me - thank you.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment ;-)

Really useful and clear video - thanks for sharing 👍

@ultimatehandyman

4 жыл бұрын

You are welcome Thanks for the comment 👍

Great video, I've just bought the same lock as it looks simple to fit with your instructions - cheers mate, keep up the fantastic work! Dale

@ultimatehandyman

9 жыл бұрын

Thanks Dale, I have these installed on two garage doors now. I'm actually working on some remote controlled electric shoot bolts at the minute for my main garage. I should finish them next week sometime. I'll video them once they are working ;-)

@turkiyekaan5817

9 жыл бұрын

***** where can i buy this kind of lock please !!

@ultimatehandyman

9 жыл бұрын

Turkiye Kaan I bought mine from a seller on ebay

@turkiyekaan5817

9 жыл бұрын

thks

Great video pal..I'm installing a pair of new garage door locks soon..on order right now..p.s great top tip with the blob of black paint.! Cheer's pal.! 😉

@ultimatehandyman

6 жыл бұрын

You are welcome Thanks for the comment

thank you for your quick response excellent video and well demonstrated cheers mate.

Thanks so much for making this video. you input saved me a few hours!! 😂

@ultimatehandyman

8 жыл бұрын

You are welcome. Thanks for the comment ;-)

Mate thank you. I have a old tilting garage door that I'm trying to secure, you've just solved my problems

@ultimatehandyman

2 жыл бұрын

👍

Just a quick thanks just finished installing these on my lock up, that video made it an easy job :o)

Thanks for the video, just what I needed !

@ultimatehandyman

9 жыл бұрын

+jim jennings You are welcomeThanks for the comment

Hi Handyman ! Had to file the fitting bolt-holes with 'corners' to allow the square of the coach bolt to enter and fit flush. Not having any power I used a battery drill and for the larger holes of 11mm I used a round 11mm sheet metal punch and die - the type that you drill a small bolt-hole and using an Allen Key to draw the punch through into the die. I did find the dab of paint tip very helpful - thanks very much !

@ultimatehandyman

10 жыл бұрын

You are welcome Thanks for the comment

Nice video, just what I was looking for!

@ultimatehandyman

9 жыл бұрын

Dave Thompson Thanks for the comment ;-)

@ultimatehandyman That's perfect! Many thanks for the tip. Locks now arrived so I'll just need to get a 13mm and I'll be set

Good man :) just stumbled on these locks and then your vid! All the garages outside out house keep getting broke into so the to add a bit of discreet security ! Using a car parked against the door at the mo :D cheers

Very detailed thanks for time and effort

excellent, just what i needed; a nice simple how to... thanks

this was actually really helpful man

@ultimatehandyman

7 жыл бұрын

Thanks for the comment

Brilliant vid this, the only thing I did differently was loosen the bolts off and pull the lock away from the door a little before drilling the rivet holes and putting them in but still it's a brilliant vid.

@ultimatehandyman

7 жыл бұрын

Thanks for the comment

Top work mate. Thanks a lot.

A fantastic video, thank you!

@ultimatehandyman

6 жыл бұрын

You are welcome Thanks for the comment

nice one pal. I have ordered 2 sets anyway so may as well fit top and bottom. Thanks for the feedback. NIck

Good video...well explained ....But the drill bit sizes on my lock (which was not an Enfield make but I believe it's exactly the same) was 11mm for the bolts and 8mm for the keyhole...Check the sizes on the instructions that come with your particular make of lock

hi thanks for sharing the clip would it have been possible to have the locks fitted downwards and locking in to the concrete or is that not a option because of the size of the locks?

Great vid! Thanks.

great video - very helful - door locks now fitted

Thank you for the vid it has helped a lot cheers

@ultimatehandyman

7 жыл бұрын

You are welcome. Thanks for the comment

Well done mate, thank you for showing

@ultimatehandyman

3 жыл бұрын

You are welcome Thanks for the comment 👍

Great Video, very useful

excellent informative video many thanks - will go and get some locks now

@ultimatehandyman

7 жыл бұрын

You are welcome. Thanks for the comment ;-)

Great clear vid in nice HD

thanks...great video ... VERY helpful.

Excellent ,really helpful ,thank you.

@ultimatehandyman

5 жыл бұрын

You are welcome Thanks for the comment ;-)

Great vid thanks. Have just bought a set of these to fit.

@ultimatehandyman

3 жыл бұрын

Glad I could help Thanks for the comment

Fab video great work

Handy installation tips, thanks.

@ultimatehandyman

9 жыл бұрын

You are welcome Thanks for the comment

I know this is now 12 years old however I’d like to say thank you for sharing and helping me decide on what to purchase for my garage, these locks are much mor discreet and draw less attention than a Garage Defender style lock, my personal opinion is a massive external locking device lets everyone know that you have something inside the garage worth stealing

Excellent clip. Bought mine from Amazon. Same. Fit tomorrow

@ultimatehandyman

9 ай бұрын

Thanks for the comment 👍

Thanks mate, nice video by the way :)

Great video and now I know how to secure my garage door. Just one question please, is a Pop Rivet Gun with 2.4mm,3.2mm,4mm & 4.8mm rivets OK for the job?

Good vid,,, God job, made it look easy,,

Cheers mate very well explained

@ultimatehandyman

2 жыл бұрын

Glad it helped 👍

The paint trick!!! Pure Genius

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

Thanks for the vid, just installed these today. Tip for anyone considering it... have the right sized drill bits!

@ultimatehandyman

3 жыл бұрын

Thanks for the comment 👍

i have no idea why any one gave this a thumbs down, clear and easy to follow

@ultimatehandyman

4 жыл бұрын

Haters gonna hate (I have a small army of haters ;-) ) Thanks for the comment 👍

@sonofagreatsouthernland

7 ай бұрын

Bob the builders wife not happy haha

Great video - My garage door frames are made of hollow aluminium. Would I still be able to install the bolt recesses or do I just need to drill holes for the bolt to go into?

personally I think these are better than the defender. the defender only butts up against the door stopping opening where as these actually bolt into the frame and my door has a steel frame so more secure and at £30 even cheaper than a defender. mine arrived today next day so happy days there too. now to buy an assortment of drill bits haha

Neat job , well done

@ultimatehandyman

7 жыл бұрын

Thanks ;-)

Thanks for this! Using a dab of paint is a great idea, I'd never have thought of it.

@ultimatehandyman

Жыл бұрын

Glad it was helpful! 👍

First off, thanks for the great video. It's really well done. I opened up my Asec bolt pack to find that they didn't include any rivets! I was wondering if you know what type and size of rivets are needed so I can go purchase them. I'm hoping they're not too hard to get. I'm over in the States and we still have yet to get with the metric system. Thanks for the help!

@ultimatehandyman

8 жыл бұрын

+Merengue Electronics You are welcome. Sorry, I don't know. The best option is to take it along to your local hardware store, to ensure you get the correct ones. Or you can do what I sometimes do any buy a selection pack fave.co/1mNjJCu Thanks for the comment ;-)

might get a set now iknow how to fit them thanks !

@ultimatehandyman

2 жыл бұрын

Glad I could help 👍

Just ordered 4 of these all keyed alike for each corner of metal up and over garage door but i don't plan to use the keyhole covers and I'm gonna paint bolt heads black same as door to minimise visual appearance. I just feel the shiny bolt heads and keyhole covers could be an invitation to have a go as there's prob something worth nicking imo.BTW ebay do them keyed alike my four were £63 using same key on each lock. Gr8 vid!

@ultimatehandyman

4 жыл бұрын

Thanks for the comment 👍

Thanks Very Much. I had someone remove my lock and replace with there own. The garage door company is coming to remove it then I am going to install 2 or four of these. Thanks!

Cracking neat job 👍🏻

@ultimatehandyman

2 жыл бұрын

Thanks 👍

Clearly explained method and well illustrated - thanks, could I just suggest an initial horizontal pencil line through entire centre line would confirm accurate alignment.

@ultimatehandyman

3 жыл бұрын

Thanks for the comment 👍

Great vid.

@ultimatehandyman

6 жыл бұрын

Thanks for the comment

great video

@ultimatehandyman

2 жыл бұрын

Glad you enjoyed it 👍

Brilliant!! Thanks.

@ultimatehandyman

4 жыл бұрын

You're welcome!

Thank for this video,

@ultimatehandyman

4 жыл бұрын

You are welcome Thanks for the comment 👍

Brilliant video, I must have watched 50 (at least) of your other videos and they too are excellent. Yesterday I ordered the Asec version via Amazon and it arrived this morning! Why do we wait until our premisses are broken into and then upgrade the security? I intend to fit these locks to my sisters and my garage door, and, if successful, because I have just retired I will then think about fitting them to other peoples garages for a reasonable price. Thank you

@ultimatehandyman

9 жыл бұрын

Thanks Albert. I must admit that when people come to my house, they see the alarms, the camera's, the PIR lights and the security locks and people always ask "have you been broken into before", to which I reply "No, but I probably would have been broken into if I had not made it very difficult for them!". You can never have too much security ;-) Thanks for the comment

Hi, for added security would you reccomend that you fit these to the top of the garage as well as the bottom?? thanks Nick

Good demo

@ultimatehandyman

2 жыл бұрын

Thanks 👍

Great Video! I have a pair on order and looking forward to getting them fitted, thanks. Has anyone fitted the metal tube that comes with the locks?

@ultimatehandyman

8 жыл бұрын

+Dave Cobb You are welcome. I have not used the tubes yet, but someone may answer. Thanks for the comment

You have any tips on good electric heating systems for large rooms of 4x5m and/or thermal wallpaper?

Top video, I mean videurrrrrr (I'm from Chorley, so it's alreet). Thanks!

@ultimatehandyman

4 жыл бұрын

😂 Thanks for the comment 👍

Well done!

@ultimatehandyman

2 жыл бұрын

Thanks 👍

very helpful: thank you

@ultimatehandyman

5 жыл бұрын

You are welcome Thanks for the comment

good job, but would have been better into the ground as concrete is harder than wood , also i notice the bolts are visible through the gap, are they case hardened ? a hacksaw blade would slip onto them nicely!

Great video, I'd like to fit these but my metal door is very thin. Would that cause a problem?

Excellent instructions. Thanks.

@ultimatehandyman

10 жыл бұрын

You are welcome Thanks for the comment

@chicatube

10 жыл бұрын

Any idea where I can get these bolts in London? My local Home base and B & Q don't stock them.

@ultimatehandyman

10 жыл бұрын

googly chica No idea, sorry. I bought mine from a seller on ebay

@chicatube

10 жыл бұрын

***** Received my bolts on ebay and hope to follow your instructions to a T and fit them tomorrow, weather permitting!

@ultimatehandyman

10 жыл бұрын

googly chica I hope it's a decent day for you, best of luck with it ;-)

What sizes do rivets come in,what size pilot hole do you use for each size,whats the min and max size that can be riveted and what materials,thanks.