Don't listen to all the negativity - excellent video, an asset to KZread.

Used this video to help me install my kit. Very helpful! Thank you!

@Temptation_Offroad

3 жыл бұрын

Welcome! Glad it helped😉

Great video man

I just had to let you know that I think your clutch pulling set up is better than a puller that you buy because it doesn't tear up the end of the crankshaft like a OEM or aftermarket puller would.

Awesome video, thanks!

@Temptation_Offroad

4 жыл бұрын

Welcome! Glad it helped out hopefully😃😉

Good little trick thanks man

Good video

What are the symptoms of needing a rebuild?

What size weights did this kit come with?

If I were to do this I would use my hydraulic press and a 2x4 chunk to push the top down so I don’t need 3 hands

Are you still in northern Minnesota?

that was hillarious almost the way i did it

Man you really should of put that knuckle buster in slow mo.

hello grate tutorial just one question. im spanish i dont understan very well the size pf thr bolt you use like a extractor can you write me the size?? thanks allot

@Temptation_Offroad

3 жыл бұрын

Hola mi hermano, gracias por la pregunta. hablo un poco de español, así que aquí están las medidas. 3/4" Perno, 16 paso de rosca, 6" pulgadas de largo. 😉

Hi,i have a polaris Magnum 425 and i need switch my clutch too,i learn who switch the clutch, thanks bro.hi from Portugal 💪

@Temptation_Offroad

Жыл бұрын

Hi! Glad the video helped😎🤝🏼

Boa noite sabem a medida do parafuso para sacar embraiagem agradeçia

Good stuff thanks for the vid, helpful, and nice puller workaround. Holy cow a cheater bar on an adjustable wrench, bad news! lol, about to post that then you hurt yourself, concern confirmed! Good vid though otherwise 😆

What size/length of thread stock are you using for the secondary clutch press? I gotta do this to my 250 but have to buy the nuts washers and stock before I'll be able to tear the clutch apart and won't have access to a hardware store once I'm there to do the job.

@Temptation_Offroad

3 жыл бұрын

I believe i mention it in the video what size /length, thread it is. Otherwise you can order a clutch puller from Amazon for pretty cheap

@John_Doe-007

3 жыл бұрын

@@Temptation_Offroad you did for the clutch puller, I'm referring to the press you made(set up in the vise) to compress the secondary clutch to remove the snap ring and get the helix off.

@Temptation_Offroad

3 жыл бұрын

@@John_Doe-007 Ahhh ok, yeah that one i dont remember what size etc it was

So how did it turn out....did you like it and what did it do for acceleration and so on?

@Temptation_Offroad

4 жыл бұрын

Turned out excellent, Atv turns the tires over no problem in the mud now. Might have lost a little top end but not too much. I posted a video testing it out on my channel.

Hi could you send the part number for the clutch kit you used I also have an 03 500 ho and am running a similar setup. Thanks

Which spring is best for wheelies

@Temptation_Offroad

3 жыл бұрын

The 2021 Can Am 850XMR spring😂🤣😂👌🏻

Amigo disculpe tengo una cuatrimoto polaris sportsman 500 cuando le pongo velocidad la moto empieza a caminar y las rpm están bien será el embrague

@Temptation_Offroad

Жыл бұрын

Hola, umm, supongo que tal vez el embrague no está completamente acoplado o la correa se está deslizando. Con este kit de embrague instalado, las rpm de acoplamiento inicial son más altas que las originales, pero no demasiado altas. No estoy seguro de si eso ayuda o no, pero esa es mi mejor suposición en cuanto a su problema.

Hey, will the process be the same on a 13 500 efi? Super tutorial btw

@Temptation_Offroad

3 жыл бұрын

Hi, Im not positive but it should be really similar I would imagine yes. Most clutches operate the same way so i would think it would be about the same thing.

@sindremaaaaan391

3 жыл бұрын

@@Temptation_Offroad ok, thanks

@Temptation_Offroad

3 жыл бұрын

@@sindremaaaaan391 Welcome, have a great Easter weekend!

@sindremaaaaan391

3 жыл бұрын

@@Temptation_Offroad you too!!

I have a 2004 Polaris 500. The mechanic put a clutch on it and now it feels heavier. It lacks power. That guy has disappointed me. Where can I get that kit?

@Temptation_Offroad

2 ай бұрын

Check out Epi website and find the right part number to fit your atv. They have different kits depending on tire size and type of riding. Once you have the part number you can Google search that number to find places selling that kit. I bought mine on Amazon. Just make sure to find the right kit for your machine first.

You sound Canadian.

@Temptation_Offroad

3 жыл бұрын

Lol🤣😂🤣 I have been know to go to Canada lake trout fishing.... Must have brought home the accent too eh!

You say bugger a lot. LoL

Buy some power tools , you could shave 10 minutes off your video.

That was, literally, painful to watch.