Cut the old grips off. Clean the bars. Grab your new grips and fill one with gas. Give it about 20 or thirty seconds and then dump the fuel out and quickly slide on your grip and position where desired. They will basically melt on the bars. You can wire them but I have never had one slip. Done. Many different ways to do it but the old gas trick is a good one. Good video. FYI, if you have handguards that go into the bar ends, install grips prior to cutting a new hole for the handguards. I appreciate your videos, Kyle.

quick tip put 5 cent coins in the end of your grips it stops the bars poking through the grips when you drop your bike

@calebcatinas5593

7 жыл бұрын

Micheal Rex did you just glue them on?

@TerrickHarden

6 жыл бұрын

That's actually a great idea.. I will try that

@laelenfoster

6 жыл бұрын

What If you want barkbusters

@OriginalAuttin

6 жыл бұрын

Dang, wish I would’ve known that before I put my new grips on

@jonbing6670

6 жыл бұрын

I was able to force 2 quarters in each grip, came in handy on a long ride to buy gas to get back to the truck

Just a quick Aussie bush tip, petrol or gas as you guys like to call it, also works really well The petrol kind of melts a tiny bit of the rubber inside your grip which forms a glue itself, then the grip will slide on really easy and being petrol, it evaporates really fast meaning the grip will stick really fast and it's ready to ride 5 or 10minutes after you put the grips on Another reason it's handy is everyone has fuel with them when they are riding but not everyone carries grip glue or wire. :)

@joeybags7411

11 ай бұрын

Awesome tip !!!!!

i dont even own a dirtbike idk why im here

@toadamine

4 жыл бұрын

Because you need to get a dirtbike! 🙋‍♂️😁👍🇺🇸

@kukjolle3682

4 жыл бұрын

It's that time of the night huh?

@sendit1158

3 жыл бұрын

Because KTMs are wicked is the reason

@gmx0413

3 жыл бұрын

It's a sign, Get one

@JarJarDoinks69

2 жыл бұрын

You will one day.

On the throttle side only put glue on the throttle and not inside the grip to avoid glue getting squirted between the throttle and bar

Odi Lock-on grips, no glue, no wires.Simply the best 👍

@gmx0413

3 жыл бұрын

I had some of those for a while, I run those on my 125.

@ElSlickVic

2 жыл бұрын

I run those on my Raptor. Love them. Just got a CRF70 for my kid.

Oh and a quick throttle tube tip. Put a penny or a nickel in the end of your grip when putting it on so nothing can get in the end of the throttle tube. Also gives you a little fall protection.

Thanks for the tips. Seems simple but new to the dirt bike world and like watching before doing so I don't wreck it!

Thanks for the tips, these vids really help a dirt bike newbie like myself. It's easy to believe that, like you said, there's always that feedback that you're doing something wrong and such (always is), but there are endless ways of doing things. It's always best to check several tutorials and pick your own way. I for instance used contact spray to remove old grips non-invasively (and very easily too), cleaned bar with acetone (old glue) and contact spray, sanded with grade 800 (preferred a bit finer) and used clear coat as a glue. But even though I did things a bit differently, this video still added a lot of insights and variations to maybe try out some day. :)

Thank you for this video! I'm about to replace the hand grips on a 2016 KTM 50 SX Mini. I really like your channel. I subscribed a few weeks back. You really know a lot about dirt bikes! I learn something every time I watch one of your videos.

I've never liked full waffle grips. My favorite grip so far is the pro taper pillow top. I have used the Emig lock on grips and there pretty good, but I feel like there isn't enough cushion in the palm of my hand.

I use the Pro Taper Pillow Top grips, find them great on my 2 strokes ( SX250 and TE300) for absorbing some of the vibration. Always used Rental medium on Trials bikes.

just a lil quick tip, if u dont have glue, a little bit of hairspray will get the job done

@tywalk036

2 жыл бұрын

Or clear coat spray paint

@swagger3766

2 жыл бұрын

Could you use super glue?

@Definitelynottheatf

2 жыл бұрын

@@swagger3766 not sure, may not react to the materials to well

@Definitelynottheatf

2 жыл бұрын

@@swagger3766 plus extremely over kill in my opinion

@swagger3766

2 жыл бұрын

True

I just ordered some pro tapers for my KLX 300. Can't wait to get them on!

Love the video... well done .. going to try the compressed air trick before cutting and since I don't have grip glue will try the hairspray from the bathroom :) Pro Taper Pillow Top Lites for my KTM 500 is what I'm going with..

The protaper half waffle clamp-one are the best in my opinion. Super easy install and you don’t have to mess with all the glue junk to keep them on

Quality video and I like the new rider spotlight, great idea.

Kyle do you have any plans to do any type of hair scrambles or any racing like that in your future?

I like Renthal grips. Pretty cool the rider spot light at the end of the vids.

Love your channel and energy man, ur the best!!

Another great video Kyle, I use half waffle pro taper grips I like the feel they give.

@gmx0413

3 жыл бұрын

I like those, Pretty decent grips

pro grip 801 has been my go to grip for the last few years , 80 hours one set which i think is real decent

I use pro taper; but I like to add a bit of stickiness to my grips (literally) I don't know if anyone has tried it but sticky grips are the best especially if you live in Hawaii like me they make great for trail usage

I use the half waffle too very comfy. Great video too

The pillow top I run on my wr250r as I found the bars had a high frequency vibration that would numb my hands. For strictly off road I like the half waffle like you put on your Ktm.

Pro Grip 788 triple density are my favorite so far

Kyle, you should try Spider grips! I've had mine on for 5 years and they are still like new.

you should do a video on your maintenance routine after each ride

I've only used stock grips and Scott waffle grips the scotts are rreally nice feeling I think and easier for longer riding but I've only had them and stock

7:55 You put glue inside the end of the throttle grip.. what do you think will happen when it sets on the throttle lol? What i do is slide it in and the unfold it , and glue it .. doesn't need to go all the way on throttle side since its so tight. They never turned on me doing it the way i do and never bind on the throttle.

can you please do a video on suspension tuning?

I have installed the ODI locking grips on my last two bikes and I'm putting them on my new husky( medium compound half waffle). they are great grips and have nice cutouts for handguard mounts as well...

I like the scott diamond mx grips on my 450.

I love the pro tapper pillow tops grips

I like using Methyl Ethyl Ketone or MEK to clean the surface after sanding, the stuff dissolves the excess glue and rubber that might be left from the old grip

Great im actually taking the bike apart and we are half way to putting it together and now I know how to put on the bike grips or change because we need to.

Love those pillow tops too . Devo you cut them off . Wet method I quick spray of brake clean or carby/throttle body cleaner . Slide it on ( inc the Aussie 5c bar end ). Or dry use compressed air blowing into grip expanded the grip away from the bar as you slide it on . I’ve tried all sorts of grip glues etc and never found anything really gets even coverage or long lasting . Ps replace that broken front brake lever !

Love your videos keep it up

Hey, where did you get those pants? Brand and style? Thanks!

I usually spray brake clean or carb cleaner on the bar, slide the grip on, and it makes the rubber sticky and soft until it dries. I find the glue doesn't get enough air and it never seems to dry properly.

@darrenwilson3732

5 жыл бұрын

I did that recently, both grips split in 20 minutes, the brake cleaner ruined the rubber. I have used it for many years, and that was the 1st time it happened. Hair spray is the way to go.

Some good tips in there!

Nooooo please don’t cut your old grips off if they are still good, use compressed air and blow them off!

@HDCowboy

3 жыл бұрын

How the heck do you get grips off with compressed air? That's a new on on me!

@larrysmooth2674

3 жыл бұрын

Jimmy James literally start blowing compressed air in it from the insert part after spraying it down with some degreaser

I have bad luck with the odi lock on grips. The clutch side grip does not fit over many popular handle bars including protaper and rental. Sanding the bar is required, which I didn't do because I assumed these should just be easy to install (which is the main reason to buy these grips in the first place). Going back to glue on grips.

Good Stuff,,, Thankyou for your video. I have used and pour rubbing alcohol into grip , pour out and quickly install. Ready about the same time as gasoline. So far so good i recon.

I like torc 1 racing diamond grips they have good feel

Do you ever use safety wire? I always have but maybe it is not needed.

Can you do a video on how to clean a throttle assembly

I shoot air with an air compressor as I put on the grip. Old trick a mechanic showed me. Been doing it for past 10 years, no need for glue :)

I use pro taper pillow lites you get a little better feel on the grips

Pro taper Pillow tops, I don't even glue mine, I probably should change them though I have been running them for probably five years or so

i got some renthal grips havent ptu them on yet i got the firm an i think i may swap them for a softer grip

Have you heard of the Pillow Top Lite? It really is a great alternative to the normal PT

@goprowhiteboy

8 жыл бұрын

that's what I use

Thanks Kyle! Awesome videos! I’m entered on the bike giveaway 🤞🏻

Thanks for the tips!

running odi lock on grips on my kx450 and all I do is trail ride and they are great

hairspray works really well to keep the grips on and spin free

What glue will you recommend?

Pro taper pillow tops glued and wired.. I know... overkill but that's how I do it.

@gmx0413

3 жыл бұрын

That's how I do it too. Better safe than sorry

Hey, what's the glue you used?

Hair spray is what I use for my dirt bike, the wife’s quad, and my street bike. Slippery when you put it on, dries quickly and stays in place. Never heard of anyone using paint. That’s new.

i do the boiling water trick to get my grips on, i actually used a gas heat gun on my last set which worked really well

I have pro taper pillow top on and I like them so I’m just replacing them

I needed grips for like 3 years now. They were half gone all ripped up i dont use gloves so i dont notice really. Anyway went to put them on was dighting to fit it on never noticed they were different sizes

I use hairspray for grip-glue/lube. To get grips off- use a compressed air nozzle just under the grip has grips off in 3 seconds.

Just installed some protaper pillow tops. I have been running the half waffle grips and I'm not really a fan.

What do you do for a living ? Just curious i own my own business and 2 kids. i just dont seem to have the time for much of anything else . i have a drz 400sm with 600 miles and just dont seem to get to ride . im hoping with my son getting little older i can ride more . im buying him a bike and myself a bike in the spring.

@DirtBikeChannel

7 жыл бұрын

I do technology sales during the day for a local company. I treat Dirt Bike channel as part time work, I don't watch a lot of TV :)

This was very helpful

Hi mate love your videos. Could you do a video on: preparing a mx bike for enduro. As iam staring enduro and not shure what to do with my ktm 150sx 2016. Chears

@veeru0999

Жыл бұрын

give it to meeee

@veeru0999

Жыл бұрын

ill trade my klx140

Cool vid. I've got to do this myself.

informative vid as always 👍

Always use a half waffle grip, currently using Renthal. Dont have a real preferance for grip brands, all of the half waffles i used working without a problem. Curieus what you think of the ODI lockon grips!.

@DirtBikeChannel

8 жыл бұрын

I like the ODI grips. I have used them on the both of the XC-F's I've been testing this year.

@Mutiny-5050

8 жыл бұрын

ODI for the win.

1080P!!! How could you!!

this show about ancient Egypt got me fired up to buy new grips for my Yamaha WR250R

what is your opinion for 50cc enduro mopeds?

@shawnliggett331

5 жыл бұрын

Good shit!

How long does it take for it to dry

This video help me so much thanks

Just bough locking grips on my 200EXC. Like the security, but the grips have NO padding at all. I don’t mind though.

On my bike the thing that connects to the throttle is broken can I fix this

I currently am riding the ODI emig V2 lock ons

Personally I ride pro grip on my kx85 and they are so comfortable

What kind of glue did you use

Yo yo yo I done fucked up and bought dirt bike grips for my quad will I be fine or do I need to buy another set of grips

I really like the pro taper pillows… but…. I can’t get more than a month of use before replacing. I ride 2 hours per day hard riding. Good ole hairspray works well on grip install

I like spidergrips, they are soft but still they hold for a long time

Been riding whole life an jus know figure out grips have different size holes thanks dude hahahaha no wonder so hard to get on gas side hahahaha

Hairspray works great to slide grips on and never moves when dry.

What’s the thing on the front of the grips?

LOVE THOSE PILLOW TOPS!!!!!!!

@gmx0413

3 жыл бұрын

Me too. I don't run any other grips

i just clean up the bars, put about 10 zip ties in the grip, slide it into position, pull out the zip ties and your good to go. no glue needed, no dry time :) and my personal favorite has always been the scott full waffle grips

@DirtBikeChannel

7 жыл бұрын

Cool tip using zip ties.

@maaudioman

7 жыл бұрын

thanks buddy. and great video you got here

@wannabem334

7 жыл бұрын

Steven Karren use metal safety wire, it strong, secure, and looks more flush than zip ties

@primerecording2337

7 жыл бұрын

Captain Comical he is talking about using zip ties to get his grips on not to use them as a replacement of wire.

@maaudioman

7 жыл бұрын

yes, that exactly

Do you think a 300 2 stroke or 250 is to powerful for me I'm 13 and ride Kx 85 and 125

@HybridEdits

8 жыл бұрын

If your experienced enough I would say yes and no. Yes because you won't really ever out grow a 250 and no because if you ride a 85/125 a 250 might be too much to handle especially on the throttle.

What’s the things called in front of the grips?

How to fix gummed up throttle once new grip is installed?

Can i put MTB grips on a dirtbike?

Were do these round bits of sponge go

what do you think about foam grips?are they good or bad?

What does he mean when he says he would wire it and glue it

my pro taper pillow tops give me blisters all the time and they hurt, so I like the stock KTM or the emig something, forget what they're called

I prefer the pillowtops but then again other than the stock grips I have never tried anything else.

how do you install a protaper bar?

I'm done with grips that spin. I've switched to odi lock on. And I really don't like large diameter grips.