Great job on the video. Thank you for taking the time, that was extremely helpful! God bless!

@CountryLivingExperience

2 жыл бұрын

You're very welcome! God bless y'all as well.

Great video, thanks for taking the time to make it, I know it adds a lot of extra hassle to any job!

@CountryLivingExperience

2 жыл бұрын

Thank you. I appreciate it.

Well done. Appreciate your verbal clarity and well though out explanations.

@CountryLivingExperience

2 жыл бұрын

Much appreciated! Glad it was helpful.

THANK YOU from Canada, that God bless you.

@CountryLivingExperience

3 жыл бұрын

You’re welcome

Great video with all the detail I needed. Thank you

@CountryLivingExperience

4 жыл бұрын

Thanks Johnny. Glad it was helpful.

Great video, as usual. You made it look quite easy. Thanks for the information.

@CountryLivingExperience

4 жыл бұрын

Thanks man! I appreciate it!

So descriptive and thorough. Just what I needed. Thanks for your time

@CountryLivingExperience

3 жыл бұрын

Glad it was helpful!

@joseochoa7043

3 жыл бұрын

@@CountryLivingExperience Very informative video. Out of curiosity, can you chimney pipe be to high? My pipe sits on the lower side of my house. So I have three 3’ foot pipes. Any info would be appreciated

@CountryLivingExperience

3 жыл бұрын

@@joseochoa7043 9' of pipe should be ok but you will need a lot of bracing.

@joseochoa7043

3 жыл бұрын

@@CountryLivingExperience Most definitely. Do you think being that high could cause a problem? I’ve been having a hard time starting/keeping the fire from dying today

@CountryLivingExperience

3 жыл бұрын

@@joseochoa7043 It should have a better draw if it is that high. Remember the 3-2-10 rule. 3 feet minimum above the high side of the roof and 2 feet above anything within 10 feet.

Thanks for all the information. It is a good overall - general info video to help the DIY people get a better idea of what we're getting into.

@CountryLivingExperience

Жыл бұрын

You’re welcome

Thank you so much for your help installing wood stove chimney.

@CountryLivingExperience

Жыл бұрын

You’re welcome

Thanks for the great video! I'm installing a homemade wood furnace that I fabricated out of an old propane tank. The furnace looks great, but I didn't know where to start with the chimney. Thanks for your help! My project was for my motorhome in which I live, but the information is still helpful and mostly applicable. I'm subscribing. 🙂

@CountryLivingExperience

3 жыл бұрын

Glad I could help and welcome to the channel!

@ladynada3435

2 жыл бұрын

I love your icon!

@merrickbrody8859

2 жыл бұрын

@@ladynada3435 thank you! The picture reminds me of my old friend, Mooch. She was a great cat. ❤️

@jeromehawkins2026

Жыл бұрын

GOD 🙏🙏🙏🙏🙏 BLESS YOU AND YOUR FAMILY!!! YOU HAVE DONE 👍 OUTSTANDING JOB TEACHING ALL OF US PHENOMENAL 👍😎👌👌👍

The second big collar is for the attic insulation shield and the smaller one is for the roof above the flashing. FYI

@ChrisCross2014

3 жыл бұрын

I didn't have enough clearance to install mine in the attic. He probably had the same issue.

Helpful video. I do believe the what you thought was a wider storm collar is actually supposed to be installed around the pipe just above the insulation shield to meet code and keep the insulation shield clear of debris and insulation.

@CountryLivingExperience

3 жыл бұрын

Glad it was helpful!

Hey man! Nice job 👍

@CountryLivingExperience

4 жыл бұрын

Gracias Amigo!

I love it that you’re still wearing a Ron Paul shirt! (Former Ron Paul Delegate here🙋🏻‍♂️)

@CountryLivingExperience

3 жыл бұрын

Thank you. I will never take it off…lol. I helped make the polling phone calls during the primary. What an amazing time. I am still Facebook friends with a couple delegates.

@karljones3518

2 жыл бұрын

Indiana delegate 2012 here!

@Jesseviersprobablydad

2 жыл бұрын

Ron Paul shirt in 2021- best indicator This guy has a superior level of Trustworthiness and unmatched moral consistency

@itsbillhere9315

2 жыл бұрын

man This made me subscribe based off the thumbnail before I even got to the video Real Patriot 👏👏👏👏

@StaceyLandrum

Жыл бұрын

Was a Delegate from WV!

Great video, well done!

@CountryLivingExperience

2 жыл бұрын

Thank you

Thank you 😊 I’ve bought a wood burner need to get the flu pipes now!

@CountryLivingExperience

2 жыл бұрын

Glad I could help!

Absolutely fantastic - explaining the centering techniques you used was HUGE!

@CountryLivingExperience

9 ай бұрын

Glad it was helpful!

Great video. I appreciate all the tips and links. One suggestion, you might make an additional short video on installing a stove with a 90 degree angle going into a wall. I have been reading up on this design and have come across a number of regulations regarding 90 degree angles. I think it would be a compliment to this great, detailed, video.

@CountryLivingExperience

3 жыл бұрын

Thank you. I am not sure what you are referring to with the 90. This is the only stove we will be putting in this house so I won't have an opportunity to make another video on the subject unless I move.

@MissChievousRN

2 жыл бұрын

Yes please!! In these cooties19 times, I'm wondering how to put a wood stove chimney into a modern home in a pinch... I've been really wanting to have back up heat (well, if I had it my way, it would be primary heat!) I can grow food and hunt and we have small livestock and have multiple options for cooking, a creek for water, but heat in the winter?? That's the one that I'm really worried about. Im thinking a wood stove on concrete floor of the walk out basement, just in case, vent through a window? So many videos but not enough for complete noobs explaining the bare basics and mechanics so we understand what we are doing and why, so if it becomes a necessity, we know how to put something efficient and safe, on they fly.... If it was entirely up to me, I'd have a rocket mass heater down there with parlor stoves for boosters and "space heaters". Ultimately I'd like to have an actual big momma cook stove oven, in my kitchen, (husband has a long way to go before that would ever happen) but in a SHTF situation, everything is fair game. Anybody have suggestions?

Great video very informative and well done

@CountryLivingExperience

2 жыл бұрын

Thank you. Glad it was helpful.

Great video buddy. I just installed mine today with your help. Only thing I'd add is wear nitrile gloves when sliding the flashing in. I was more liberal with the goop and lifted the flashing as much as possible as I set it into place rather than slide it. I made sure there was goop under the screw holes too; three along the bottom, two midway up

@CountryLivingExperience

Жыл бұрын

Thank you!

Good info for those who are able.

@CountryLivingExperience

4 жыл бұрын

This is the second time you have made a comment like this. If you would like to contact me via our facebook page or email, I can hopefully put you in touch with some helpers from one of our local churches. Would that be helpful?

Great info; thanks.

@CountryLivingExperience

3 жыл бұрын

Glad it was helpful!

Love your shirt brother. Helpful video, thank you

@CountryLivingExperience

3 жыл бұрын

Appreciate it! Glad we could help.

Great advice

@CountryLivingExperience

Жыл бұрын

Thanks

This is the best duravent style tutorial on KZread great job Sir!

@CountryLivingExperience

9 ай бұрын

Thank you

11 thumbs up .... how many "T" are in across? LMAO this has been the best vid ive seen for installing stove pipe. ty last vid i watched, the guy used galvanize pipe mounted upside down. and no fire protection on his floor in an rv. and ur vid nice cam wrk and ur understandable too. no annoying music is nice also..

@CountryLivingExperience

3 жыл бұрын

Awesome. Thank you for the kind words and I am glad the video was helpful.

seen MANY videos.... like the comment below, a few VERY helpful tips-thanks bro !!!!!!!!!!!!!!!!!!!!

@CountryLivingExperience

3 жыл бұрын

You're welcome. Glad it was helpful.

Excellent video. Getting ready to install a wood stove in my outbuilding using Rockford Chimney stove and chimney pipe and this one really helped visualize my installation. Shouldve known it was going to be a decent video when I saw the Ron Paul shirt👍

@CountryLivingExperience

6 ай бұрын

Thank you. I appreciate it and I am glad it was helpful.

The Ron Paul shirt sold me.

@CountryLivingExperience

2 жыл бұрын

Awesome!

Good job

@CountryLivingExperience

3 жыл бұрын

Thank you

I love your shirt! Great video as well!!

@CountryLivingExperience

Жыл бұрын

Thank you! I appreciate it.

Good video thank you

@CountryLivingExperience

2 жыл бұрын

You're welcome

Love the T-shirt! 👍

@CountryLivingExperience

Жыл бұрын

Thanks! RevoLution

Thank you so much for this vid ! Glad I watched or I would have only gone half way down shingles but now I know better 😁

@CountryLivingExperience

Жыл бұрын

You're welcome

Extra points for the Ron Paul shirt.

@CountryLivingExperience

2 жыл бұрын

Awesome!

Very Good!

@CountryLivingExperience

3 жыл бұрын

Thank you.

@CountryLivingExperience

3 жыл бұрын

Thank you

Love the shirt

NICE T SHIRT!

@CountryLivingExperience

2 жыл бұрын

Thank you

Very Good.

@CountryLivingExperience

2 жыл бұрын

Thanks!

Man....lol....you keep showing up I'm my searches. Keep up the good work.

@CountryLivingExperience

Жыл бұрын

Awesome! I must be doing something right!

LOVE your shirt

@CountryLivingExperience

Жыл бұрын

Thanks brother!

I subscribed, thanks!

@CountryLivingExperience

2 жыл бұрын

Welcome to the channel

t-shirt made me choose your video, cheers

@CountryLivingExperience

8 ай бұрын

Awesome!

This is great video, with a lot of details explanation. I'm curious about what the inside of the attic looks like? Did you box in the pipe?

@CountryLivingExperience

3 жыл бұрын

Thank you. Sorry the attic is so tight, it is hard to even crawl back to the point of install. The ceiling box that you saw installed is the only surround that is required. It sticks into the attic about 8 inches and holds the insulation back from touching the chimney pipe. Some people like to add taller sheet metal boxes but it is not necessary.

What if you have a metal roof? This is a very helpful video

@CountryLivingExperience

3 жыл бұрын

Thank you. Metal roofs require a completely different connection kit. You can probably find it on the DuraVent website.

Thank you so much, I didn't know if I had to twist the end cap or what. But it just pop in to place.

@CountryLivingExperience

8 ай бұрын

You're welcome

Nice chimney video 🌝

@CountryLivingExperience

2 жыл бұрын

Thank you

Interesting channel, I'm subbing. We're looking for a homestead and we're half packed up but no place to go yet!! I found your channel when I was looking for a solution to my problem. We have a telescoping flu and I lifted it to see if there was any build up so I wouldn't have to get on my roof. Later we used a piece of fat wood to start a fire and we soon opening doors, turning on a fan and then I seen my flu was leaking smoke at the top. Now I know I must've untwisted the thing...! Take care, we'll be looking in..

@CountryLivingExperience

Жыл бұрын

Welcome to the channel. Hope you can find a homestead soon.

Ron Paul!!! ❤️‍🔥🔥🔥🔥❤️‍🔥

love the ron paul t-shirt

@CountryLivingExperience

Жыл бұрын

Awesome!

I subscribed for the t-shirt!

@CountryLivingExperience

Жыл бұрын

Awesome!

Hey I was looking up stove pipe installation videos and noticed your shirt said Ron Paul! I don’t care what you’re doing, I’ll subscribe! Lol

@CountryLivingExperience

3 жыл бұрын

Awesome! Glad to have you here.

@BrandorT

2 жыл бұрын

@@CountryLivingExperience me too! we'd be a lot better off with RP leading us through this BS today

@drawfark

2 жыл бұрын

I wont!

Great video. At 21:50 you mention a link to a worksheet or website that helps with the calculations for the chimney pipe spacing and clearance’s. Do you have one you recommend? Thanks!

@CountryLivingExperience

4 жыл бұрын

Thank you. Here are a couple of sites that are very helpful. www.northlineexpress.com/help-pipe-install-planning.html woodstovepro.com/articles/understanding-the-10-foot-2-foot-3-foot-rule-how-to-determine-the-chimney-height-of-class-a-solid-fuel-pipe-above-the-roofline/

The little dabs on the flashing is like what we do with a sucking chest wound. Leave the lowest side free on the chest to let blood and air out so we don’t cause a tension pneumothorax!

@CountryLivingExperience

2 жыл бұрын

Exactly

Good video. Love the shirt...

@CountryLivingExperience

Жыл бұрын

Thank you

Love the shirt! They banned him on Facebook... this censorship is scary and pathetic that RP got the ax.... I was all in the ron paul revolution 2008 and 2012 and he's still out there making sense ! Love the video too!

@CountryLivingExperience

3 жыл бұрын

Thank you! I appreciate it. The country really lost out when they railroaded him at the convention in 2012. He was our best chance to turn around.

@neutzz2008

3 жыл бұрын

Peace. Prosperity. Personal freedom and individual rights. No wars!!! Such radical thinking RP. It's a good thing the war machine corporate controllers banned Ron Paul from putting such terrible ideas into the minds of Americans! It's sad, I'm sad that people think this censorship is totally fine. The pendulum will swing the other way eventually. This will ultimately lead to a totalitarian dictatorship style government. Some would say, myself included, were already well on our way

@CountryLivingExperience

3 жыл бұрын

I totally agree.

Great Video. One thing I noticed was the lack of a damper. Is it necessary for all wood stoves?

@CountryLivingExperience

3 жыл бұрын

Thank you. You don’t need a damper in most modern stoves. If you have an older stove it is better to have one.

You earned a subscriber with that shirt.

@CountryLivingExperience

2 жыл бұрын

Welcome friend

i like the Ron Paul shirt.. The Libertarian life is best. :)

@CountryLivingExperience

Жыл бұрын

Thanks. I like your Red Wings icon.

thanks for the info i watched it right to the last second ......which is rare on my part. lol i subscibed and liked. great informative video. keep up the great work. from fort simpson nwt canada .....

@CountryLivingExperience

2 жыл бұрын

You're welcome. Glad we could keep your interest and offer good info.

If I had a Ron Paul short I’d be rocking it until it was rags. Big fan

@CountryLivingExperience

2 жыл бұрын

Awesome! I have a few of them still.

I liked the thoroughness of your video, very helpful. Did you have to install a cold air intake pipe at bottom of stove?

@CountryLivingExperience

3 жыл бұрын

Thank you. No need for an intake on this model stove.

Gracias Gracias ❤

@CountryLivingExperience

Жыл бұрын

De Nada

Good video. Can you advise the specific part number for the DAP adhesive? Thanks.

@CountryLivingExperience

3 жыл бұрын

Thank you. I don't remember using DAP but here is the Loctite High Temp that I bought .......amzn.to/3iOy7HG

@slimcastle1

3 жыл бұрын

@@CountryLivingExperience thanks!

Awesome t shirt 💞

@CountryLivingExperience

2 жыл бұрын

Thanks so much!

Great video! I have a very similar install I'm planning for. How does the attic shield attach to a vaulted/angled truss? It looks like it's designed to attach to a level surface. Did you have to adjust the flanges on the shield to match the angle?

@CountryLivingExperience

Жыл бұрын

Thank you. The ceiling box attaches to the truss in the vertical plane. If you need bracing, that will just sit between each truss perpendicular to the floor. This kit is made for an angled ceiling. Sorry, I don't know how to describe it any different.

What are your thoughts on putting a wood stove in a split level home from basement to first floor is 4 steps and to the second is 6 steps. Using a wood stove to heat the home over the furnace?

@CountryLivingExperience

2 жыл бұрын

It is going to be difficult to move that heat through the levels. I would put one in just for emergency backup and comfort.

did the same install talked to a sales tech to help with order since this stove install was my first rodeo the did not sen the adaptor for the celing box

@CountryLivingExperience

2 жыл бұрын

At least they are nice and send out the missing parts right away. They do need better quality control though.

Nice video! I'd like to know how one keeps from smearing the adhesive all over the decking and keeps a good bead under there to get good surface adhesion when reinstalling the flashing after the dry fit.

@CountryLivingExperience

3 жыл бұрын

The adhesive shouldn’t be that runny. It should stay where you put it until you get the flashing down.

@Cacheola

2 жыл бұрын

Use LOTS, double what he used and lift the flashing up high enough as you slide it up in there so as not to smear it all off the leading edge - he could've done a better job with the flashing, otherwise excellent vid

@kevinsubartowicz9132

2 жыл бұрын

Or just remove the shingling around the area and reinstall it after you’ve secured the flashing. They make roofing tar in tubes to reseal shingles.

Thank you for your video. How do you install the stove pipe on a metal roof?

@CountryLivingExperience

2 жыл бұрын

You're welcome. I have never installed one on a metal roof personally. I do know that there is a special kit that you can get for a metal roof. All the other pieces and processes are the same as in the video.

@kevinsubartowicz9132

2 жыл бұрын

Same process basically except you’ll have to deal with overlapping pieces of roofing sheet metal instead of shingles. In essence you want everything overlapping so water runs off and away.

you had me at the Ron Paul Tee.

@CountryLivingExperience

3 жыл бұрын

Awesome! Welcome to the channel.

@levilueth7778

3 жыл бұрын

Same haha

Love that shirt.

@CountryLivingExperience

2 жыл бұрын

Awesome! Thanks

Thumbs up for the Ron Paul shirt

@CountryLivingExperience

2 жыл бұрын

Awesome! Welcome to the channel.

this video is super helpful!! could you tell me what kind of piping is needed to run between the fireplace and the ceiling? is it a single layer black pipe or does it have to be double or triple wall as well? Thank you for your help!!!

@CountryLivingExperience

Жыл бұрын

You’re welcome. It is actually a double layer Duravent DVL stovepipe. Single wall gives off more heat though.

@jleight9544

Жыл бұрын

Single wall will require a minimum of 18” clearance to combustible material. Double wall is only 6”. Important information

Pretty good!!! I’m aiming into that project. Are all stoves the same?? Any particular reason to choose one from another?

@CountryLivingExperience

Жыл бұрын

There are two types....catalytic and non-catalytic. Catalytic wood stoves differ from non-catalytic in that they produce fewer exhaust fumes and burn more efficiently. In addition to burning wood, catalytic wood stoves also have a combustor that burns the smoke and byproducts.

Did you have to put anything under the shingles that you pulled up that laid over your flange? Also did you seal the gap between the edge of the shingles you cut and the insert? Thanks

@CountryLivingExperience

Жыл бұрын

Nope. No need to do either.

Does your box get condensation? Mine is just dripping wet when I'm not using the stove.

@CountryLivingExperience

4 жыл бұрын

It does not. I have never encountered that before. That would only happen if it was really warm outside and very cold in your house.

Did you receive the replacement for the missing double wall adapter? It has been almost a year...any news?

@CountryLivingExperience

3 жыл бұрын

We did. Duravent was great and sent a new right away. Took 3 minutes to put it on.

Is this type of roof material (shingles) common in the US. Do many US homes have proper tiles?

@CountryLivingExperience

3 жыл бұрын

It is very common. About 98% of single family homes use asphalt shingles.

Hello, I did enjoy and appreciate the tutorials. I am needing advice on costs. My chimney pipe was damaged during the Little Rock tornado and I just need to replace a portion of the pipe. I was recently quoted $1400 to replace the pipe and collar. May I send you a picture of the damage so that I may get further advice from you.

@CountryLivingExperience

11 ай бұрын

Thanks. Most of the money is probably labor. The chimney pipe is about $150 per 3ft section. The collar is not that much.

Double wall thru the attic space and roof Is ok to use rather than triple wall?

@CountryLivingExperience

2 жыл бұрын

Yes, absolutely. No need for triple wall.

They are very picky in Canada about woodstoves. You have to have an inspector come to your house and check it out before you can get house insurance. All your pipes have to be double insulated. They do not want to insure you at all with woodstoves and charge more money for insurance. Unless you pay cash for your house you have to have insurance. They also check to see if you have working smoke detectors and carbon monoxide. We probably burn a lot more wood than you do because of the cold weather. We have been lighting fires since October and have 2 stoves. We also burn 12 cords a year and have to clean the pipes quite regularly.

@CountryLivingExperience

4 жыл бұрын

Sorry to hear they are so strict. We are fortunate. I will probably burn one cord this winter if it is cold. Twelve cords is a huge amount but I know how cold it is up there. I think my uncle burns about 10 in northern Michigan every winter. Hope you are well.

@lyndabelknap8367

4 жыл бұрын

@@CountryLivingExperience Thanks Eric. I look forward to your youtube videos every Tuesday. They are all different but are very well done. Especially like the canning one where you did the pears.

@CountryLivingExperience

4 жыл бұрын

Thank you so much Lynda.

Great video! What Duravent Kits did you use? Would you happen to have a link?

@CountryLivingExperience

2 жыл бұрын

Thank you. We used the DVL kit. I will try to find a link. It has been years since I purchased it.

@CountryLivingExperience

2 жыл бұрын

Found it. This is the same install kit (with some improvements): amzn.to/3NirIVB. We then just purchased individual double wall DVL stove pipe and stainless double wall chimney pipe.

Great video!!what screws did you use in flashing pan head?

@CountryLivingExperience

2 жыл бұрын

Thank you. We used coated exterior deck screws. 1 1/4"

@jrtonka19

2 жыл бұрын

@@CountryLivingExperience thank you

G’day from Down Under. Thanks for a great video. I can’t find the details of what products and tools you used, do you have a website or FB page where I can see that information. Thanks again Steve 🇦🇺

@CountryLivingExperience

2 жыл бұрын

Hello. Here is the list that is located under the video.... Loctite Polyeurethane Roofing Sealant: amzn.to/2BPSVeP Dap Polyeurethane Roofing Sealnant: amzn.to/2MR6Mb4 Dewalt Impact Driver: amzn.to/2qMCFc8 Stanley Pry Bar: amzn.to/2MR57SS Ryobi Reciprocating Saw: amzn.to/345PXyX Plumb Bob Measuring Tape Sharpie Caulk Gun Drywall Saw: amzn.to/2q24Aok Flathead Screwdriver Hammer The stove pipe and chimney pipe including the ceiling kit were all made by DuraVent. They are the DVL type. Hope that helps.

Do you need that ceiling box only for slanted ceilings?

@CountryLivingExperience

Жыл бұрын

The ceiling box is for all ceilings.

do you have to have a damper system in any situation???

@CountryLivingExperience

2 жыл бұрын

It is not 100% necessary on a wood stove chimney. It basically just prevents cold air from coming all the way down into your stove. It helps to slightly regulate draw up the chimney when you have a fire.

Love your t-shirt. Ron Paul is a great man.

@CountryLivingExperience

2 жыл бұрын

Awesome! He absolutely is. Glad to have you here.

Hello, Best tutorial the average Joe like myself could have asked for. We are getting the Drolet HT 3000 and can't wait to have it up and blazing! I was quoted $5000 from the "professionals" to do it and I don't think this is as much of rocket science as they made it seem. I find the hardest part is finding all the right parts and pieces as none of my local big box stores have a complete set of the same brand. That last piece you mentioned (double wall chimney adapter) which came in my Duravent Up the ceiling kit, do you happen to know if it would fit a non Duravent double wall black stovepipe? I was able to get Duravent Chimney pipes so that's good from ceiling support and up but I can only get my hands on either a Selkirt or Supervent black stovepipe and I'm not sure if they would fit a Duravent adapter. I'm hoping the Duravent adapter is universal and would accept any brand but sometimes it pays off to double check everything in advance as I already know how finicky those products are. Hope I didn't bore you out with my rant but any feedback would be greatly appreciated! Thanks again for the wonderful content!

@CountryLivingExperience

6 ай бұрын

Glad it was helpful! I am not sure if that Duravent adapter will fit another brand. I would venture to say no. I had to buy all of my stuff online because no place sold stove pipe around here.

@charlesdesurne4696

2 ай бұрын

how did it turn out for you ? i just purchased the same stove and thinking about installing myself .

How high did you put the chimney above the roof line 'roof top"?

@CountryLivingExperience

Жыл бұрын

24"

A closer look inside the attic would enforce confidence. Otherwise, your video is a great educational video.

@CountryLivingExperience

3 жыл бұрын

Be confident. You can do it.

What about people with a metal roof ? Great video.

@CountryLivingExperience

6 ай бұрын

Thank you. There are different kits that you can buy for a metal roof.

Did you put any sealant on the underside of those shingles ? Also, what kind of screws did you use to secure the flashing ? You made an excellent video, I'm going to use your video and Knowledge to install my furnace flu pipe through my garage roof. One other thing do you know how many feet you have to be above the ridge/peak of the roof. I'm like 3' feet away. Thanks if you could answer those 3 things for me. I would appreciate it. Thank you

@CountryLivingExperience

7 күн бұрын

Thanks, I appreciate it. No sealant needed. The shingles were new so their sealing strips are still very good. I used decking screws since they are coated and won't corrode or rust (for a long time). You should be 24" above that ridge line.

@nickpanhead7209

7 күн бұрын

@CountryLivingExperience ok great, thank you for getting back to me, I ordered all of my selkirk through the roof kit. Looking forward to getting heat in my garage this winter. Yeah I have older shingles, I'll probably have to get a tube of roofing cement/cork. Looks like an easy enough job to do. Or you just made it seem that way, lol. Ok have a good night. Thanks again

@CountryLivingExperience

7 күн бұрын

@@nickpanhead7209 You're welcome. Good luck with the project.

Hi thanks for the great video, looks like both of the links for extra info are broken :(

@CountryLivingExperience

2 жыл бұрын

Thanks for the heads up. I will check the out.

Can the pipe be painted a darker color or does it come in another color like matte black I honestly don't like such a reflective surface

@CountryLivingExperience

Жыл бұрын

It is stainless steel that will not rust. No need for paint. They make a galvanized chimney pipe as well. I am sure you can pain that.

you need three more of those storm collars on there

@CountryLivingExperience

2 жыл бұрын

I was thinking 10 more.

Good video, but you should have pulled the shingles to bull the roof Jack down and seal all the nail holes. One hard blowing rain, you’ll find leaks.

@CountryLivingExperience

6 ай бұрын

Thank you. They have never leaked and resealed perfectly.

Ron Paul Forever!

@CountryLivingExperience

2 жыл бұрын

For Liberty!

Love the shirt... I am installing a wood stove in my garage and there is no attic or crawl space above the ceiling. Trying to figure out how to see what is between the ceiling and the roof... how do you handle situations like this?

@CountryLivingExperience

3 жыл бұрын

If there is no space between and your ceiling is essentially the underside of your roof, you will need a different specialized kit to connect the stove pipe and chimney pipe.

@CountryLivingExperience

3 жыл бұрын

I have a few of these shirts left. I will be sad when they wear out.

@richslonaker2768

3 жыл бұрын

@@CountryLivingExperience it’s not so much that there is no space, but there is no way to get into the space, like would in an attic, to attach the box

@CountryLivingExperience

3 жыл бұрын

Sounds like you may still need that special kit. Duravent makes one.

What I do not understand is does the square support box have to go from the ceiling to the roof. I have a 4.5 ft from the ceiling to the roof. Do I need additional length of support box.

@CountryLivingExperience

Жыл бұрын

No. The support box is just to transition from the stove pipe to the chimney pipe. It supports the chimney pipe.

@BrentandLynn1

Жыл бұрын

@@CountryLivingExperience thank you so much.