How to install cantilever concrete forms on a fiberglass pool
I teach you how to set up cantilever concrete pool deck forms. First I talk about the set up of the pool and rebar. Next I show you how we set up and space out the self tapper screws. After that I show you how to bend the forms using packaging tape. Then I teach you how to stick the forms to the pool walls at the right height. Lastly I show you how to tape all the edges and twist the ties through to hood the concrete in place. Thanks for watching!!
Please subscribe to my channel! -
/ @masonthemason6412
Want to learn more about concrete? Click on the links below to learn more!
The process of a concrete pour-
• How to pour a concrete...
• How to pour and a conc...
• How to pour and a conc...
How to bull float and edge concrete-
• How to bull float and ...
• How to edge concrete
How to pour concrete-
• How to pour a concrete...
• How To Pour Concrete S...
• How to Pour Concrete S...
• How To Replace Concret...
• How To Pour Concrete I...
How to finish concrete-
• How to swirl finish co...
How to prep concrete pours-
• How to Form Concrete o...
• Concrete Prep for Base...
• How to Use Masonry Tap...
• How to Prep Concrete
Concrete footers-
• Form A Drain For Begin...
• Form A Drain
• Ditch Pouring Footers
• How to Form Block Foun...
• How to Set Up/ Pour Fo...
• Transit Tips For Diggi...
How to do concrete cantilever pool deck-
• How to pour a concrete...
• How to install cantile...
All my pool deck videos in this playlist-
• Concrete Pool Decks
These vlogs of concrete jobs are my favorite-
• We Poured a Big Concre...
• Pole Barn Concrete Floor
• We Replaced a Concrete...
• Huge Concrete Pool Deck
• One Of The Best Finish...
• Best Finish To Put On ...
• Pouring concrete sidew...
• Wheelbarrowing in a co...
• Concrete pour for a do...
• Two pours in one day
• Concrete Driveway Pour
• Hard concrete pour for...
• I finished 100 feet of...
• Wheelbarrowing in a co...
• This truck was going t...
• Placing 60 Yards Of Co...
Пікірлер: 35
I'm doing this tomorrow for the first time and this video is perfect
@masonthemason6412
Жыл бұрын
Sweet
@kevinbriggs2611
Жыл бұрын
Spencer, how did it go?
Wow!! Awesome stuff .
@masonthemason6412
Жыл бұрын
Thanks!
Good stuff man!
@masonthemason6412
Жыл бұрын
Thanks!
Yes finally some concrete! Hope to see the pour!👊💪🔨✌😁
@masonthemason6412
Жыл бұрын
I’ll post the pour tomorrow!
@GRUBB-MUDD
Жыл бұрын
josh what up? I know I was down the other day, I apologize,(Mason helped me through it) stand up guy, but josh how would u feel about a colab w Mason one day? we kinda been talking about it. Mason have u ever used those forms on anything besides a pool? jw I think it could look decent on a certain type of step porch or patio, I swear I heard a concrete truck backing up in the back ground. was the neighbor pouring some conrete? maybe it was a trash truck
@masonthemason6412
Жыл бұрын
Where are you guys from? I only use these forms on smooth surfaces
@GRUBB-MUDD
Жыл бұрын
@@masonthemason6412 u know I'm from Indiana, I use form liners all the time, but I was just curious if u could use these things like form liners, I put mine around patios all the time. I guess they are pretty esp and can only use the 1x
@GRUBB-MUDD
Жыл бұрын
Josh u good man?
Question what of the plastic bead that comes with the foam forms. Is it needed?
Is the plumb strip for fiberglass installed? I didn’t see it on the shell. You’ll also do better with butyl tape than packaging tape
We have these exact pool and forms and are getting ready to start this process . Your video is great ! My husband and I were just wondering it you use the white plastic pieces when doing this job ? We are doing our just like this straight concrete no tile .
@masonthemason6412
Жыл бұрын
I’m not sure what those things do, I’ve always thrown them away. I’m sure there’s other videos out there that show what they do. I’m assuming they are for a specific kind of pool or something
Do you put the packing tape on top of the forms as well?
My pool has some points when it curves in and out. How do I do it so form doesn't break? Thanks
Mason, do you have to cut the small wires that go through the foam and around the screws when you remove the forms?
@masonthemason6412
Жыл бұрын
They break when you twist them
@kevinbriggs2611
Жыл бұрын
@@masonthemason6412 OK thank you!
Easy money 💰
@masonthemason6412
Жыл бұрын
Right on 🤑
@austineverding5978
Жыл бұрын
Did pool to past 2 day but with counterform track system
@masonthemason6412
Жыл бұрын
I’ve never used that
@austineverding5978
Жыл бұрын
It's a way better system that reuseable
@masonthemason6412
Жыл бұрын
I’ll have to look it up
Hi Mason, My name is Anthony Musser and I work directly for stegmeier. Thanks for using our product. I would love to talk to you sometime about the process. you can find my email on the website.
@GRUBB-MUDD
Жыл бұрын
dang that's what's up mason!!!!! keep up the good work
@masonthemason6412
Жыл бұрын
I’ll go find it. Thanks!
@masonthemason6412
Жыл бұрын
I found you. Can’t find email